Biztalk Windows Log shows the Keyword Clasic

Hello All,
Today I was trying to look the Logs for checking if there is some errors, when I opened the Logs all the keywords turned to be Classic, I don't know why. This happened now in prod, earlier even in dev environment.It looks like
What can I do, so it shows as errors and warnings. Any help is greatly appreciated.
Thanks

 You can right click  where it says Level, select Add/Remove columns, click on the button, Restore Defaults, then OK.
Reference
http://www.neowin.net/forum/topic/987330-how-to-switch-classic-to-information-keyword-in-event-viewer/
Thanks
Abhishek

Similar Messages

  • How do I get pop-up windows to show the navigation buttons (not just the address box)?

    When I click on a link that opens a new firefox window, the new window shows a navigation toolbar that does not include the back, forward, stop, and home buttons (it only shows the internet address box). However, the original firefox window that I navigated away from shows all of the navigation buttons AND the address bar. How do I get these new firefox windows to show the navigation buttons in addition to the address box that automatically appears?

    See:
    http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
    http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings

  • SAPScript:  why the window only show the LAST line

    Dears,
    In my form, one of the window only show the LAST line of the it.
    I have set the window enough space,  also when  debuging the program , open_form, write_form,
    all of those sy-subrc = 0.
    both static texts and dynamic texts are set  in the window,   but only the last line shown.
    Anyone could help me?
    Thanks a lot.
    Sincerely,
    Julie Lv

    Hi,
    There are several possibilities to resolve your problem.
    You can work with 2 main windows on in1 page.
    With NEW-WINDOW you switch to the next main-window
    How to use it.
    make an item in main window with that /: NEW-WINDOW command
    if you are ready with first loop call a WRITE_FORM with that NEW-WINDOW statement.
    to cojntinue in the other main.
    Other possibility is. (in case there are not ot many lines)
    Use for every line other variable names.
    Fill these in the loop. And after loop WRITE FORM
    eg. (if maximum is 3 lines)
    &VAR1_1& &VAR1_2& &VAR1_3& &VAR1_4&
    &VAR2_1& &VAR2_2& &VAR2_3& &VAR2_4&
    &VAR3_1& &VAR3_2& &VAR3_3& &VAR3_4&
    Hope this helps.
    Gr., Frank

  • Windows Logs show Event ID 264 Warning

    Hi,
    Our customer report that there is one waring log in windows logs. Please check below message.
    The O.S. is windows 8.
    Log Name: System
    Source: Win32k
    Date: 6/13/2013 6:18:02 PM
    Event ID: 264
    Task Category: None
    Level: Warning
    Keywords: Classic
    User: N/A
    Computer: test
    Description:
    A multi-touch device reported inconsistent contact information.
    But
    (1) The multi-touch device has passed the WHCK. And,
    (2) we also double-check it the device hid descriptor. Device pass the descriptor check by Microsoft's tool "Digitizer Report DescriptorChecker".
    I know there are many laptop have the same problem. But no one has solution for this.
    Did MSFT has solution for this or any other test tool which can help to find the root cause? Since the log is created by System, and our device alreay check our all functions which declared in the hid descriptor. We have no idea why the waring showing up.
    Once MSFT reply the event id 264 issue by the following return information.
    MSFT : it may relate to firmware. For example, firmware claims it can support 2 contacts, but actually it reports 5 contacts information.
    But We can't find the wrong part of our device's hid report descriptor, and device alreay pass WHCK. Since many other laptop have same problem, I think it's not a easy guess root cause by checking our own firmware. Hope MSFT can check
    this issue and offer more information.
    From the event id 264 description:
    A multi-touch device reported inconsistent contact information.
    We would need more "precise" reason of the warning log.
    Best Regards,
    Sean

    Hi,
    Is there any answer for this.?
    because I have the same problem with my Lenovo u430 touch laptop
    after a period of time using the laptop, it will suddenly unable to use touch screen. and I get this exactly the same error message from event view log.

  • Navigator window sometimes shows the wrong image

    I have been going through photos the last 2 days and found there were times when the navigator window (top left) displays a diff image than the image selected in the thumbnails and it doesn't change until i get out of that gallery and go back in.

    Kevin,
    When you hover over an image in the filmstrip, navigator shows the image from the filmstrip and not the active image in Grid. Could this be what you notice?
    Beat Gossweiler
    Switzerland

  • When I try to choose a new folder to save a bookmark the resulting pop-up window only shows the top lefthand quarter minus any buttons, FF4 in Ubuntu Lucid

    When bookmarking a page, I click on the star or the menu. The 'Edit This Bookmark' window appears, I click on the folder arrow and select 'Choose'. The resulting window shows a large black shadow with the top left of the actual window. If I run the cursor across the black shadow various parts of the missing window appear and I can complete the operation, but it obviously sould not be doing this. I am using FF4.01 in Ubuntu 10.4 Lucid. I have taken a screenshot if you need it.

    You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    *Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  • Windows 10 shows the 2nd monitor has 1920x1080 but actually it is 50% less around 1080x840

    The resolution of the 2nd monitor, a Vizio VF551XVT 55-inch 1920x1080 HDTV connected through HDMI cable, shows 1920x1080 (Recommended) on the Windows 10’s Display Screen Resolution setting utility but the true resolution of the 2nd monitor is less than 50%; around 1080x840. All applications on the 2nd monitor displayed their header & boarder frames twice wider on screen, which waste/occupy lots of the 2nd monitor’s display area. Please advise how to correct this critical lower than the set/expected resolution problem of th 2nd monitor.  Thanks. The 1st/primary monitor in this case is a mobile PC Display (1920x1080), Lenovo Z710 Intel i7 4710MQ notebook with NVIDIA 840M GPU. Previously running under the Windows 8.1 OS with the same configuration, the 2nd monitor resolution was also displayed incorrectly but just initially right after the Windows 8.1 reboot, i.e. 2nd monitor shows 1920x1080 resolution but actually the 2nd monitor is about the same as Windows 10, the actual resolution is much/50% fewer than 1920x1080. However, the resolution of the 2nd monitor (HDTV) under Windows 8.1 can be corrected (worked around) by switching the main display from 1st to 2nd monitor, then switching main display back from 2nd to 1st, but such Win 8.1 work around doesn't work for Windows 10 OS . Also, please advise whether Lenovo, MS Windows or NVIDIA is responsible for the displays re-position issue. The re-position issue is, when a TV, PC, shared 2nd monitor is disconnected to watching TV, etc., Windows OS currently moves all the display positions, both active and minimized displays, from 2nd monitor to 1st/main monitor, but ideally would be just moving/re-position the active displays to the main/1st monitor and maintain/leave those minimized display positions intact, so when 2nd monitor reconnects back (done watching TV), user doesn’t need to re-align all the displays back to 2nd monitor again. Thanks for helps. 

    If you won't lose anything and if it is not a big hassle, I would re-install.
    Mainly because Win 10 TP is, after all, a beta OS. Too many possibilities of bugs and glitches. It is better off to reinstall.
    The latest build 9879 has a ISO download link. Use the ISO and burn it to a bootable DVd. Then use the DVD to do a clean reinstall.
    http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10

  • In Firefox 4.0.1 (Mac), where is the arrow in the url window that shows the last few visiting sites in a given tab?

    Previous editions of Firefox had an arrow at the right side of the url window of a tab so you could see where you'd been in that tab before--where is it now?

    You can get the drop down list by either right-clicking (or control-clicking) on the back/forward buttons, or holding down the left button until the list appears.
    If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker (I believe the add-on works on the Mac, but as I do not have a Mac I can not test it)

  • When I select a mail message, there isn't a window that shows the thread and message...That window is gone. I only have the inbox window and the left sidebar with my mailboxes, but no "preview window" that shows the message selected in the inbox window

    Any help would be greatly appreciated...I just want to reset mail to the default UI and I can't even figure out how to do that. Any help would be greatly appreciated..I have no idea how I messed this up!

    Actually there's no bar/dot. I think that's for a previous version... I'll include a screenshot:
    As you can see theres no "bar" at the bottom of the window...help?!

  • Is there any way in Finder I can get the window to show the amount of free space on a selected drive?

    I am not a fan of all the changes they have made to finder in Lion.

    Sorry, I didn't know this was so old when I replied. I hope it was helpful anyway.
    Go to desktop, click on hard drive, command+I or File ... Get Info.
    Then you will see the info for that drive and listing the available space.

  • My Aspire 7750G does not show the login screen after upgrade to Windows 10

    I have upgraded to Windows 10 on my 7750G and the update went thru smooth.But when I restart Windows it shows the windows screen with the moving dotted circle,the harddisk led stays on for a while, then starts flickering, and a blank screen is shown!After waiting - about 2 to 3 minutes - it goes directly to the lock screen, no login screen is shown.

    joeboemoe,
    The lock screen is where you login now, if I am not mistaken. The notebooks we have here boot to a lock screen we have to click to log in, even my PC at home does. If you want to take a look at this article we created, it might be what you are looking for.
    I created a password for one of the logins on one of our notebooks and I had the option to choose Never under "If you've been away, when should Windows require you to sign in again?"

  • I am trying to transfer an old profile into Windows 7, but the AppData folder does not show up under my name folder in USERS. How can I find it?

    When I go to Help & Troubleshooting & click Open Containing Folder I get a Windows Explorer window that shows the file path including Used-Edward-AppData, etc. But when I click on the little triangle to the right of Edward the drop down menu does not include AppData and if I just go into Windows Explorer and Users-Edward, there is no AppData folder. So I cannot overwrite the profile file with the saved profile info from my earlier laptop. The folder symbol next to Edward has a lock on it but I don't know what that means or how to unlock it.

    %AppData% is the name of an environment variable.
    On XP that variable points to C:\Documents and Settings\&lt;user&gt;\Application Data\
    "Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders, use %APPDATA% in the File name field
    See http://kb.mozillazine.org/Show_hidden_files_and_folders
    You can use Help > Troubleshooting Information > Profile Directory > Open Containing folder
    See also [[Using the Troubleshooting Information page]]

  • What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

    What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

    Go to
     > System Preferences > Keyboard
    Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
    As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

  • Windows installer changes the destination path of MSI during Active Setup

    We are having issues with MSI repairs via Active Setup on a handful of PCs.  Most of the PCs work correctly.
    The scenario is this:  we have a vbscript that installs two MSIs as system via SCCM.  The script then creates Active Setup entries for both MSIs to put the user based files into the user's profile at the next logon.  The /fpu switches are
    used.  This works for the vast majority of our users.
    However, on 12 PCs the verbose MSI log shows the destination path for the files being changed from the logged on user to the system profile.  So the user never gets the files needed to run the application.
    Any help with this would be greatly appreciated.
    MSI (s) (F8:5C) [11:14:13:355]: PROPERTY CHANGE: Modifying LocalAppDataFolder property. Its current value is 'C:\Users\dz0fx1\AppData\Local\'. Its new value: 'C:\WINDOWS\system32\config\systemprofile\AppData\Local'.

    Hi,
    Could you give us more log entries about this issue? To see the whole process would be useful to analyze this issue.
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

  • Firefox 7 won't allow me to switch windows; if it's up, it's on top, so if I ask it to open a site in a new window (instead of a tab) I can't get to the window without minimizing the first window. This makes it impossible to work.

    I upgraded Firefox to 7 on my Win7 Pro 64 bit desktop yesterday. Today when I try to open a site in a new window, the window opens but I can't switch to it unless I actually minimize the first Firefox instance. Clicking on the second window just shows the first window again.
    Worse, it insists on being on top of other programs. I needed to check my Norton Firewall settings against some instructions on a web site, and I couldn't switch back and forth - I could ONLY have Firefox on top. Until you fix this I'm going back to Chrome, guys. I have looked through the Options menus and I can't find an "always on top" box to uncheck.

    Dear mkunz,
    I can understand your frustration. I have elected for the option to pick up an item from a UPS location when missed upon delivery before; it is definitely a convenient option when working around a work schedule. I apologize that this option wasn’t available to you for your phone purchase.
    We do understand that people have to work and this is why we allow three opportunities for you to receive the product. I see that AWBrown has submitted an idea to ideaX page asking us to look into reevaluating this process. Using your email address you have supplied here on the forums, I was able to look up your order. Based on the tracking information, it appears that you successfully received the phone on 06/03/2014.
    If this is not the case, please let me know!
    Thanks for reaching out,
    JD|Social Media Specialist | Best Buy® Corporate
     Private Message

Maybe you are looking for