Biztalk with SAP XI Vs SAP Webservice

HI everyone,
We have biztalk as integration tool. I would like to know is it feasible to implement Biztalk with SAP XI to communicate with our SAP ECC server. I heard it will be over weight to use both Biztalk and SAP XI coz each will have its own message box and leads to more process time. So we are planning to use Biztalk with SAP webservices. So please let me know which is better as cost wise and work wise biztalk with SAP XI or Biztalk with SAP Web services.
SAP Guys please take some time to provide some useful information. it will be much appreciated.
cheers
ram

Hi Ram,
how are you doing today ?
From a business perspective, if u're using 2 rival products to do the same integration function, it is a defeat in architecture and in resurces consumed to do the requirement [tha two end systems]
lisence issues of how much is paid to the vendor will also then be higher than if u used either one and not both
technically speaking,
it is making the system overly complex without any real benefit or requirement
maintenance will increase and it will make troubleshooting more omplex when it does not need to be
i'd recommend the use of either based on the resources available
SAP web services are available since web AS 620, and just need to be enabled for the Function Module, RFC , BAPI
check out transactions WSCONFIG, WSADMIN
using them will make things simpler all around
but again it depeneds on the type of application, it's demands on Quality of Service and the nature of the Data as well
with respect,
amit

Similar Messages

Anybody experience with SAP Reliable Messaging (SAP-RM) from BizTalk?

Experience with SAP Reliable Messaging (SAP-RM) from BizTalk?
Has anyone experience with using SAP Reliable Messaging (SAP-RM) between BizTalk and SAP’s Enterprise Services?
SAP’s Enterprise Services can be synchronous request/reply, what SAP calls A2X. But many of SAP’s Enterprise Services are one-way, asynchronous. When not using SAP’s own integration solution (SAP Process Integration), SAP refers
to the use of either WS-ReliableMessaging (WS-RM) or SAP ReliableMessaging (SAP-RM). With BizTalk not supporting WS-ReliableMessaging (and not its persistent version), SAP-RM is the way to go.
More info about “SAP-RM” @ http://wiki.scn.sap.com/wiki/display/ABAPConn/Plain+SOAP
Koen

I have searched, but didn't find any resources related with SAP Reliable Messaging (SAP-RM) from BizTalk, only found the resources about Web Services Reliable Messaging. I hope it will help you.
http://help.sap.com/saphelp_nw04s/helpdata/en/46/9743916d1115ece10000000a114a6b/content.htm
http://integr8consulting.blogspot.in/2013/11/ws-reliablemessaging-ws-rm-between-ibm.html
http://scn.sap.com/thread/798701

Java.lang.NoSuchMethodError: com.sap.tc.webdynpro.model.webservice.gci.WSTy

Hello,
I have SAP EH1 for SAP NWCE 7.1 and NWDS with the recent upgrade pack of WD. When I run my WD application the following exception ocurr,
java.lang.NoSuchMethodError: com.sap.tc.webdynpro.model.webservice.gci.WSTypedModel.(Ljava/lang/String;Ljava/lang/String;Ljavax/xml/namespace/QName;Ljava/lang/String;Ljava/util/Map;Ljava/lang/String;Lcom/sap/tc/webdynpro/model/webservice/gci/IWSTypedModelInfo;Ljava/util/Map;Ljava/util/Map;)V
at pe.com.minsur.wd_test_esr.wdtestesr_model.Wdtestesr_Model.<init>(Wdtestesr_Model.java:240)
    at pe.com.minsur.wd_test_esr.wdtestesr_app.comp.Wdtestesr_Comp.wdDoInit(Wdtestesr_Comp.java:111)
    at pe.com.minsur.wd_test_esr.wdtestesr_app.comp.wdp.InternalWdtestesr_Comp.wdDoInit(InternalWdtestesr_Comp.java:445)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:160)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:227)
My DoInit Method only have this code,
public void wdDoInit()
    Wdtestesr_Model model = new Wdtestesr_Model();
Any ideas?
Regards
MG

The problem is that the logical destinations are not well configured.

Webservice (oracle erp applications) to SAP PI to SAP R/3 scenario.

Hi All,
I have to make webservice (oracle erp applications) to SAP PI to SAP R/3 scenario.
1. If I make Outbound Interface with 2 fields in SAP PI. Publish its Webservice in Service Registry and then
    send its WSDL URL to oracle erp applications system team.
Question --oracle erp team is asking me how they will call my webservice with 2 parameters so that JDBC Table which has 2
                  fields can be passed to my webservice and its parameters.
2. If I use JDBC sender adapter scenario --     Please let me know if am doing the things fine
    a. Oracle erp System driver to install at SAP PI system
    b. Connection, host name etc. information will be provided by ERP team that I will use in JDBC sender adapter
Please let me know for the aboce scenario
Thnaks

Hi ,
If I make Outbound Interface with 2 fields in SAP PI. Publish its Webservice in Service Registry and then
send its WSDL URL to oracle erp applications system team.
Question --
oracle erp team is asking me how they will call my webservice with 2 parameters so that JDBC Table which has 2
fields can be passed to my webservice and its parameters. Please let me know
The below approach is when above webserive is not used.
2. If I use JDBC sender adapter scenario -- Please let me know if am doing the things fine
a. Oracle erp System driver to install at SAP PI system .
    Question -- If I install Oracle erp System JDBC driver in SAP PI system then what is use of ora14jdbc.jar.
                         Do i need to that also. Please let me know.

SAP(Idoc) = XI = ThirdPart(WebService)

Hello friends!
I have a problem with development of acknowledgement system with SAP(Idoc) <=> XI <=> ThirdPart(WebService) scenario.
My case:
Scenario looks like:
SAP(Idoc) <=>(Idoc adapter) XI (SOAP adapter)<=> ThirdPart(WebService)
It must work this way:
SAP system send IDOC, then XI map it and send it via SOAP-adapter to third part webservice. Then webservice answer to XI with structure сontains "TRUE" or "FALSE",
and then XI must inform SAP ALE/IDOC system if current information from idoc was successfully added to webservice or not.
But how can I get it? As far as I understand ALE/IDOC system I have to create ALEAUD by myself, put status of idoc depends on webservice return and send ALEAUD idoc to SAP.
I'am right?

Hi,
You can use BPM for this Idoc--Soap Sync Process
Design objects:
Data type & Message Type
1) Import the IDOC and Later you import the Idoc, doble click on it a export it to your driver, next import it as External Definition for reason becouse if not, you wont be able to create a MI type synch with IDOC and genericResponse structure
2) Create data type for your Response Type of IDOC
3) Import the WSDL File For Request and the Response Type
4) Create the Message types according to the Data types which we created
Messgae Interface:
1) Outbound synchronous:
    output message will be ur idoc external definition file
    input message will be ur message type that u have created.
2) Abstract Outbound Synchronous:
    use the same as in Outbound Synchronous
3) Inbound Synchronous:
    input message will be ur request message of RFC/WebService
    output message will be ur response message of RFC/Webservice
4)Abstract Inbound Sunchronous:
    input message will be ur request message of RFC/WebService
    output message will be ur response message of RFC/Webservice
Mapping
Request Message Mapping:
b/w ur idoc external definiton and request message of RFC/WS
response Message Mapping:
b/w ur Response message of RFC/WS and ur message type
Interface Mapping
Import MI(abstract) of IDOC
Import MI of WS
select the mapping for request and response Tab
BPM
1) In container window define a variable named IDoc_ABS with category abstract interface and
    type (select the MI of IDOC alone)
   define a variable named GenericRespnse_abs with category abstract interface and type (select
   MI of genericResponse alone)
2) Create a Recieve Step --> in property message select the container you define before of idoc.
3) Define a Send Step--> mode synchronous
    select MI type abstract and sync (idoc and genericResponse)
    for property request message selects container Idoc_ABS
    for property response message selects container GenericRespnse_abs.
Save your Changes and thats all for BPM
*Configuration *
1) Create scenario
    Assign BS and create comunication channels with QoS (quality of service) type BE
2) Import your BPM
   Create a Receiver Determination
-->in the target service select the BPM. Save
-->In overview windown at foot windowns select MI IDoc_abs only. nothing else
Create a Receiver Determination
-->here the system who send data is BPM
-->in the target service select the BS of receiver system.Save
-->In overview windown at foot windowns select interface mapping and assing communication channel
what we do here. the flow is next
1) Receive data from sender system and send it to BPM
2) BPM call bs of target system (WS). how? because in interface determination you selected
   before the interface mapping
Regards
Seshagiri

Does BizTalk adapter pack 2010 support SAP ECC6 EHP5?

SAP Adapter BizTalk Adapter Pack 2.0:
Supported server versions: SAP ECC 6.0 Non-Unicode, SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode,
SAP R/3 4.7 Unicode, SAP R/3 4.6c Non-Unicode
SAP Adapter BizTalk Adapter Pack 2010:
Supported server versions: SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode, SAP R/3 4.7 Unicode, SAP
R/3 4.6c Non-Unicode, SAP ERP 6.0 with EHP 4.0
None specifically says it supports ECC 6.0 EHP5. But, I was able to find several posts that they are integrating with SAP ECC 6 EHP5 using BizTalk adapter. However, I would like to make sure whether Microsoft officially supports or not in case of technical
issue occurs.
Does anyone have an answer?

I appreciate your response but I'm afraid that the information you have given is what I looked up before and thought they can't be an answer. As I already have stated in my question, I found several posts saying that they are integrating with ECC 6.0 EHP5
with BizTalk Adapter. With that, I can assume the BizTalk Adapter would work with EHP5 of ECC 6.0 as EHP is just an EnHancement Package. However, it does not mean Microsoft will support it when there is a technical issue unless it is stated so. So, what I
want to confirm here is more about liability. I cannot suggest my client to use BizTalk based on assumption.
To save anyone else's time, following are SAP versions supported by each BizTalk Adapter pack. None specifically mentions EHP 5. Can anyone from Microsoft or partner confirm this??
SAP Adapter BizTalk Adapter Pack 2.0:
Supported server versions:
SAP ECC 6.0 Non-Unicode, SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode, SAP R/3 4.7 Unicode, SAP R/3 4.6c Non-Unicode
SAP Adapter BizTalk Adapter Pack 2010:
Supported server versions:
SAP ECC 6.0 Unicode, SAP ECC 5.0 Non-Unicode, SAP ECC 5.0 Unicode, SAP R/3 4.7 Non-Unicode, SAP R/3 4.7 Unicode, SAP R/3 4.6c Non-Unicode, SAP ERP 6.0 with EHP 4.0
SAP Adapter BizTalk Adapter Pack 2013:
Supported server versions: SAP 7.2, SAP 7.0, SAP ERP 6.0 with EHP 4.0, SAP ECC 6.0 Unicode

Issue with parallel operation of SAP NW SSO 2.0 and SNC Client Encryption (Logon Groups)

Hi!
One of our customers is using the SNC Client Encryption solution to ensure encryption using SNC (based on Kerberos Technology) for their SAP GUI Dialog connections. They have lots of SAP backends DEV, QAS, PRD all with the SNC Client Encryption SNC Lib installed. The profile parameter snc/identity/as contains the following value: p:CN=SAP/<ServiceAccount>@<DOMAIN>.
Example: p:CN=SAP/[email protected]
The customer is using one AD Service Account "SNCServiceUser" with one registered SPN "SAP/SNCServiceUser" for all systems (yes, this is not recommended... but the case).
Important: All users use group entries in the SAP Logon (saplogin.ini). Means, for SAP logon the SNC name can not be manually configured on the SAP Front End. With group logons, the application server's SNC name is dynamically requested by the message server each time a SAP GUI connection is started. The SNC Name is greyed out in this case as dynamically obtained from the applications servers profile parameter snc/identity/as.
Now our customer implements SAP NetWeaver Single Sign-On 2.0 within his landscape. Based on the Secure Login Server 2.0 (SP3) he likes to use X.509 based authentication to his AS ABAP backends using SAP GUI SNC while others still use SNC Client Encryption.
Replacing the SNC Library on the AS ABAP
The Secure Login Library 2.0 (SP3) has been installed on one of the ABAP systems and the SNC Client Encryption SNC Library (which is based on SSO 1.0) is no longer used, thus we changed the parameter snc/gssapi_lib to point to the new SNC library. We removed the old PSE.ZIP containing the keytab and created the new SAPSNCSKERB.PSE incl. the keytab and proper credentials. To ensure parallel operation, we kept the snc/identity/as value as is = p:CN=SAP/[email protected].
After restarting the system with initialized Secure Login Library 2.0, still the SNC client encryption works fine for existing users.
The problem
We created on the Secure Login Server an SNC certificate for the AS ABAP which has the following X.509 Distinguised Name Fomat: CN=SAP/[email protected] This is to avoid having to change the snc/identity/as to an "real" X.509 DN which would lead to non-working SNC Client Encryption for all the other users using SAP GUI and logon groups.
As soon as we install the PSE via STRUST on the system the SNC Client Encryption solution stops working with error „Server refuses kerberos key exchange“.
As part of an pilot implementation we have installed Secure Login Client 2.0 (SP3) on some test PCs. The test PC with SLC is able to perform Single Sign-On with SNC based on X.509 (incl. Encryption) to the ABAP system.
Seems the SAP System now only tries to do X.509 based authentication thus key exchange fails. The problem is, we cannot change the snc/identity/as value because of the logon groups. If we were able to do so, we would in any case set the server identity to X.509 DN and in addition create the SAPSNCSKERB.PSE incl. keytab. This should work, as confirmed by SAP see this post.
Any ideas how to solve this and have both solutions in parallel?
Appreciate any help.
Regards,
Carsten

Hi all,
we was able to fix the issue. It was an issue with the customers cluster configuration and the $SECUDIR variable. This tricky issue leads to non working or sporadic working SNC Client Encryption...
This was how the configuration looks before:
Environment variable $SECUDIR is defined:
"/ABCDEF<SID>/usr/sap/<SID>/DVEBMGSxx/sec“
sapgenpse seclogin -l -v
running seclogin with USER="<SID>adm"
Credentials for username '<SID>adm':
0 (LPS:OFF):
         (LPS:OFF): /ABCDEF<SID>/usr/sap/<SID>/DVEBMGSxx/sec/SAPSNCSKERB.pse
1 (LPS:OFF):
         (LPS:OFF): /usr/sap/<SID>/DVEBMGSxx/sec/SAPSNCS.pse
After changing the $SECUDIR to "/usr/sap/<SID>/DVEBMGSxx/sec“ and re-creating the credentials, it worked like a charm.
As a result of this we can confirm, this configuration and SNC Client Encryption works with CommonCryptoLib in parallel to the SSO configuration.
And Valerie was right with 2. SLC starting from V. 1.0 SP2 PL3 was able to convert the CN= part of the SNC Name into an SPN, was my mistake. In addition SNC Client Encryption starting from Version 1 SP1 PL1 does this also.. just to make this clear
Thread closed hope this helps someone
Carsten

How to create a custom function module with the records in SAP R/3?

Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
Sara

Hi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

Com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException

Hello Team,
We have a scenario where we have a PI web service and we are importing the WSDL into our WD Java application.
While running the test scenario we are getting the below 2 exceptions in the stack trace.
20111222:Exception trace: com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException: Exception on execution of web service on destination 'WS_CUST_**' for operation 'GetCustomer*' in interface 'GetCustomer**'
Caused by: java.rmi.RemoteException: Cannot created typed model object. Factory for typed model class '$002fWsdlDefinitions$002fWsdlTypes$002fXsdSchema$005b1$005d$002fXsdComplexType$005b1$005d$002fXsdSequence$002fXsdElement$005b1$005d$002fXsdComplexType' has not been registered.; nested exception is:
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Cannot created typed model object. Factory for typed model class '$002fWsdlDefinitions$002fWsdlTypes$002fXsdSchema$005b1$005d$002fXsdComplexType$005b1$005d$002fXsdSequence$002fXsdElement$005b1$005d$002fXsdComplexType' has not been registered.
Caused by: com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Cannot created typed model object. Factory for typed model class '$002fWsdlDefinitions$002fWsdlTypes$002fXsdSchema$005b1$005d$002fXsdComplexType$005b1$005d$002fXsdSequence$002fXsdElement$005b1$005d$002fXsdComplexType' has not been registered.
By running through few posts on SDN a probable solution for this was proposed as: blank the "designtimeWsdlUrl" properties of the model in NWDS and re-deploy the application
Any help on this would be great.
Regards,
Shailesh

Dear Shailesh,
Did you try to check the blank the "designtimeWsdlUrl" properties of the model in NWDS and re-deploy the application? please try to check and test.
Also try to import fresh in new DC and check whether it is working or not.
Best Regards
Arun Jaiswal

Mapping of field with MinOccurs 0 in SAP XI 2.0 SP5

Hi,
Our Scenario is
File -> Adapter -> XI -> Idoc Adapter -> SAP
We are trying to push IDoc and the mapping tool is giving an error. I am providing the error that I am getting.
The snippet of the XSD for the IDoc is given below:
   <xsd:element name="E1FIKPF" minOccurs="1" maxOccurs="1" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                        <xsd:annotation>
                           <xsd:documentation>FI Document Header (BKPF)</xsd:documentation>
                        </xsd:annotation>
                        <xsd:complexType>
                           <xsd:sequence>
                              <xsd:element name="BUKRS" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                                 <xsd:annotation>
                                    <xsd:documentation>Name of global company code</xsd:documentation>
                                 </xsd:annotation>
                                 <xsd:simpleType>
                                    <xsd:restriction base="xsd:string">
                                       <xsd:maxLength value="6" />
                                    </xsd:restriction>
                                 </xsd:simpleType>
                              </xsd:element>
                              <xsd:element name="BELNR" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                                 <xsd:annotation>
                                    <xsd:documentation>Accounting Document Number</xsd:documentation>
                                 </xsd:annotation>
                                 <xsd:simpleType>
                                    <xsd:restriction base="xsd:string">
                                       <xsd:maxLength value="10" />
                                    </xsd:restriction>
                                 </xsd:simpleType>
                              </xsd:element>
                              <xsd:element name="GJAHR" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                                 <xsd:annotation>
                                    <xsd:documentation>Fiscal Year</xsd:documentation>
                                 </xsd:annotation>
                                 <xsd:simpleType>
                                    <xsd:restriction base="xsd:string">
                                       <xsd:pattern value="\d+" />
                                       <xsd:maxLength value="4" />
                                    </xsd:restriction>
                                 </xsd:simpleType>
                              </xsd:element>
                              <xsd:element name="BLART" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                                 <xsd:annotation>
                                    <xsd:documentation>Document type</xsd:documentation>
                                 </xsd:annotation>
                                 <xsd:simpleType>
                                    <xsd:restriction base="xsd:string">
                                       <xsd:maxLength value="2" />
                                    </xsd:restriction>
                                 </xsd:simpleType>
                              </xsd:element>
                              <xsd:element name="BLDAT" minOccurs="0" type="date" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                                 <xsd:annotation>
                                    <xsd:documentation>Document Date in Document</xsd:documentation>
                                 </xsd:annotation>
                              </xsd:element>
                              <xsd:element name="BUDAT" minOccurs="0" type="date" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                                 <xsd:annotation>
                                    <xsd:documentation>Posting Date in the Document</xsd:documentation>
                                 </xsd:annotation>
                              </xsd:element>
                              <xsd:element name="MONAT" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                                 <xsd:annotation>
                                    <xsd:documentation>Fiscal Period</xsd:documentation>
                                 </xsd:annotation>
                                 <xsd:simpleType>
                                    <xsd:restriction base="xsd:string">
                                       <xsd:pattern value="\d+" />
                                       <xsd:maxLength value="2" />
                                    </xsd:restriction>
                                 </xsd:simpleType>
                              </xsd:element>
In this snippet as can be seen the minOccurs for the BUKRS field is 0. But if I do not map the field its giving me following error.
/usr/java131/bin/javac -encoding UTF8   -classpath .:./system-lib/boot.jar:./system-lib/jaas.jar -extdirs ./additional-lib:./services/deploy/work/applications/ExchangeRepository -d /tmp/9_53_35_27_7_2004 /tmp/9_53_35_27_7_2004/com/sap/xi/tf/_MsgMapGcentre2Fidcc2_.java
/tmp/9_53_35_27_7_2004/com/sap/xi/tf/_MsgMapGcentre2Fidcc2_.java:303: ';' expected
a117.gotoNextContext();tmpValAtr = a117.getValue();if (!tmpValAtr.equals(SUPPRESS)) handler.addAttribute("SEGMENT", tmpValAtr);a117.gotoNextValue();if (!__deflt)a115.gotoNextValue();No mapping for value/FIDCCP02/IDOC/E1FIKPF/BUKRS
                 ^
/tmp/9_53_35_27_7_2004/com/sap/xi/tf/_MsgMapGcentre2Fidcc2_.java:303: cannot resolve symbol
symbol : class No
location: class com.sap.xi.tf._MsgMapGcentre2Fidcc2_
a117.gotoNextContext();tmpValAtr = a117.getValue();if (!tmpValAtr.equals(SUPPRESS)) handler.addAttribute("SEGMENT", tmpValAtr);a117.gotoNextValue();if (!__deflt)a115.gotoNextValue();No mapping for value/FIDCCP02/IDOC/E1FIKPF/BUKRS
^
2 errors
Compilation error
Any one having any guesses on why this error is coming. I know this error would vanish if we map the field by an Empty Constant. But then it would start giving error for the next field until all the non mandatory fields are mapped.
If however I go ahead and map all the fields then the output structure generates all the segments the maxOccurs times. i.e. if a segment is occuring 999 times then that segment is repeated that many time in the output whereas I never needed that segment in the output.
Can any one suggest as to why this is happening. Am I doing some thing wrong or this is a problem with Mapping Editor in XI 2.0 SP5.
Ashish

Hello Ashish,
this is a bug in the mapping tool. You have to apply the note 730081. It says:
Symptom
After you import XI20 Support Package 04 or Support Package 05, you can
no longer change and regenerate the message mapping (graphic mapping
tools).
The following error is displayed during activation or generation: No
Mapping for value.......
Other terms
Graphic mapping tools, SAPINTSER05, no mapping vor value
Reason and Prerequisites
This problem is caused by a translation error.
Solution
The translation error has been corrected.
As of patch level 1, the correction is provided in the SAPINTSER05_1.sca
archive of the INTEGRATION Services 2.0 software component and, as of
patch level 2 for Support Package 5, it is provided in the
SAPINTBUI05_2.sca archive of the INTEGRATION BUILDER 2.0 software
component. The archives are available on the SAP Service Marketplace at:
http://service.sap.com/patches
SAP EXCHANGEINFRASTRUCTURE/SAP EXCHANGEINFRASTRUCTURE 2.0
Binary Patches/INTEGRATION SERVICES 2.0/OSINDEP and
..... /INTEGRATION BUILDER 2.0/OSINDEP
Import the archives using SDM.
The mapping must be recompiled after deployment.
Regards Franz

Integration of SAP Cloud for Customer with third party / legacy / non-sap system using SAP Netweaver PI

Hello,
has anyone experience with the Integration of a 3rd Party System with SAP C4C using SAP Netweaver Process Integration?
Is this a process of days, weeks or months?
Any documentation on this?
I am thankful for every Input!
BR, Roman

Roman,
Please read through the integration guides available on the SAP service marketplace as they address this specific topic in great detail.
http://service.sap.com/cloud4customer
The time duration of the project depends on the business process complexity being resolved and the level of integration desired between the different enterprise solutions in the landscape.
Thank you.

How to configure for GPlus Adapter with SAP Phone and SAP CRM

Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
Govinda

Hi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen

File failing with ICM_HTTP_CONNECTION_BROKEN error in SAP PI

Hi Expert,
We have file to proxy senario in our production environment where, while sending the file from PI to ECC syestem via proxy, it fails below with error in call adapter step.
Have tried with many options mentioned in scn.sap.com site like
1. Increasing the HTTP ICM PROCTIMEOUT paramaters.
2. restarted ICM in both sender and receiver system.
But still it is not resolved yet. Please help.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_BROKEN</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://cimbp05.hsec.emeadc001.philips.com:8005/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://cimbp05.hsec.emeadc001.philips.com:8005/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://cimbp05.hsec.emeadc001.philips.com:8005/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2>500 Network connection broken</H2><br><hr> <table border="0"> <tr><td>Error:</td><td>-8</td></tr> <tr><td>Version:</td><td>7210</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Mon May 4 14:12:57 2015 </td></tr> <tr><td>Module:</td><td>icxxthrio_mt.c</td></tr> <tr><td>Line:</td><td>848</td></tr> <tr><td>Server:</td><td>cimyp25_MYP_25</td></tr> <tr><td>Error Tag:</td><td>{-}</td></tr> <tr><td>Detail:</td><td>Connection to partner broken</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 401, error text: ICM_HTTP_CONNECTION_BROKEN)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Regards,
Vishnu Srivastava

Hi Praveen,
As per the solution mentioned in the link we have checked for the icm/HTTP/max_request_size_KB parameter in Quality and production environment. It is maintained as icm/HTTP/max_request_size_KB= 102400.
Also we are able to process the same file in quality but not in production though the parameters are same.
Please help..!!
Regards,
Vishnu

Timeout error in accessing CR 2008 with dynamic prompts from SAP Portal

Hi
We are using Business Objects XI 3.0 with Integration Kit for SAP
Solutions on Windows 2003 Server with Weblogic 10.0 server.we have
created a report (13 parameters) using Crystal Reports 2008 and
deployed on the BOE.Crystal Reports are created using opensql driver
and using tables.The prompts/parameters are created using Business
views.After deploying the report under the database configuration under
When viewing report the option selected is "Use SSO context for
database logon".
Later an iview is created on SAP Portal pointing to Crystal Report
using Business Objects iview template.The SSO is working fine and we
are able to select the parameters and when clicked ok we get an
error.we have pasted the error below when we try to view source :
<form action="../PlatformServices/service/app/error.do" method='post'>
<input type='hidden' name="errMsg" value="A timeout error has occurred"><input type='hidden' name="loc" value="en_GB">
<input type='hidden' name="pvl" value="en_GB">
<input type='hidden' name="errStack"
value="com.businessobjects.webutil.websessiontimeout.WebSessionTimeoutFilter.doFilter(WebSessionTimeoutFilter.java:142)
weblogic.servlet.internal.FilterChainImpl.doFilter
(FilterChainImpl.java:42)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3368)
weblogic.security.acl.internal.AuthenticatedSubject.doAs
(AuthenticatedSubject.java:321)
weblogic.security.service.SecurityManager.runAs
(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)
Ljava.lang.Object;(Unknown Source)
weblogic.servlet.internal.WebAppServletContext.securedExecute
(WebAppServletContext.java:2117)
weblogic.servlet.internal.WebAppServletContext.execute
(WebAppServletContext.java:2023)
Thanks
Kamal

Hello,
1)How do I assign my user ID to the organisational unit? Please advise me step by step as I am new to SRMu2026
2) Regarding error u201CThe following error text was processed in the system SR3 : Attribute for user USER18 contains errors. Inform system admin.
The error occurred on the application server eccserver1_SR3_01 and in the work process 0 . u201C
Using transaction SM21, I have discovered multiple errors for SAP instance eccserver1_SR3_01 like BBP_PU 245 transaction canceled, HTTP/RFC session has been deleted following timeout...
3) How do I run report BBP_CHECK_CONSISTENCY? With transaction SE38? What do I choose next from the options available?
This is too technical for me right now..maybe not in the future, but at this moment, I need more guidance...
Thank you,
Iuliana

What is the best way to follow the scenario for Out look integration with share point using SAP Gateway?

1)what is the best way to follow the scenario for Out look integration with share point using SAP Gateway?
2)workflow concepts for Purchase order?
3)Email triggering from out look for an approval process of PO? how these scenario can be best implemented with updated functions in Duet Enterprise.

Hi,
I do not have much idea on gateway integration with outlook but found out this document GWPAM Workflow Template which can be helpful for you to start with.
also you may want to post your question in SAP Microsoft Interoperability forum
Regards,
Chandra

Biztalk with SAP XI Vs SAP Webservice

Similar Messages

Maybe you are looking for