Biztalk2009 - OracleAdapter stops polling if Oracle server has been booted

We are running a two node Biztalk2009 and use (among other adapters) an Oracle Adapter, we are on Cumulative Update 4 on both BizTalk Server and Adapter Pack. It happens that someone boots the Oracle server and this seems to make our Oracle Adapter stop
polling. Even after the Oracle server is up and providing data our Biztalk Oracle Adapter no longer polls so we no longer receive relevant data even when they are available on the Oracle. Currently we overcome this by restarting the relevant Host Instances
but this is impractical. So anybody know if there is a way to make the Oracle Adapter keep polling even if an Oracle server is down and not providing data for a while ?

Hi ,
Its Always a best practise to STOP your Polling receive location or reshedule your Polling Interval during the period when downstream System Goes Offline .Due to concurrent failure for polling,BizTalk will keep the receive Location aste to Passive until
you restart the application.
Thanks
Abhishek

Similar Messages

9i - How to Determine If Oracle Management Server Has Been Configured ?

hi all,
I'm using 9.2 on a Windows 2000 server - but I'm new to this server and don't know what has been done in the past.
I'm getting the VTK-1000 error when I try to connect in Oracle Management Server mode.
To determine the problem, I need to know how I can determine whether the Oracle Management Server has been created/configured. Also, how can I know that the Repository has been created?
This is what I've tried:
-Tried logging in as sysman with a password of oem_temp
- checked the Windows services - none exist as OracleManage... which causes me to think OMS was never configured
But I dont want to destroy something that may already exist. That's why I want to confirm first.
Sorry for the lame question - I'm new to Oracle.
Thanks, John

Well, then you don't have the SYSMAN password. Here you have two options, the first one, is to try to recover that repository or the second option, to get rid of this repository and create a brand new one.
If you are willing to use the existing repository, then you will have to reset sysman's password, the procedure to perform this task is as follows:
Connect by means of SQLPlus to the repository, you should open a session with the OEM repository database owner. In case you don't have this password (most probably) you will have to temporarily reset this password, as outlined on the bottom procedure.
Open a session to the database as the OEM repoistory owner, let's say OEM_REP or whatever is the actual repository.
sqlplus <OEMRepositoryOwner>/<OEMRepositoryOwnerPassword>@<OEMRepository>
At the SQL prompt issue the command:
execute smp_maintenance.reset_sysman();
Your sysman password will be reset to OEM_TEMP, then you can enter if the repository is up and running, and you can issue commands to check status and shutdown it.
Temporarily resetting a db user password:
1. Connect to the database as sysdba:
sqlplus / as sysdba
2. At the sqlplus prompt query the dba_users table to get the password:
select username, password from dba_users where username='<OEMRepositoryOwner>';
Copy the current password in a safe place.
3. Set a new password, let's say 'X'.
Alter user <OEMRepositoryOwner> identified by X;
4. Once you are done with the previous reset sysman procedure, then you can restore the user password:
alter user <OEMRepositoryOwner> identified by values '<PreviouslyEncodedSavedPassword>';
Then you are done.
~ Madrid
http://hrivera99.blogspot.com/
.

VM manager cannot add pre configured server - Says server has been managed

Hey,
I had 2 server with 2 virtual systems installed and running on it.
My manager had some issues and had a bad hard disk and a network card.
So I freshly installed the manager on a new box.
Now when i try to add those 2 servers in the pool - I get this message
" Server has been managed."
....Any idea on this..???
I don't have older manager ,where i can go and delete the entry of the server.

If for some reason that the server is not cleaned up properly, you may see the error message:
"Error: - 'hostname' has been managed." (from Oracle VM Manager)"
You can manually reset the Oracle VM Server agent. First, shutdown the VMs on the server and make sure no VMs running on the server:
# xm list
# xm shutdown domain-id
Then, stop Oracle VM Server agent:
# service ovs-agent stop
Clean up the Oracle VM server agent state files from /etc/ovs-agent/db location :
# rm -rf /etc/ovs-agent/db/*
And restart Oracle VM Server agent
# service ovs-agent start
One the Oracle VM Server agent is up and running, you can register the server with the Oracle VM Manager.

The connection to the server has been lost

The Connection to the server has been lost.There might have been a problem in connection to the network, or Playstation TM networkor the service provider might be temprarily busy.(CE-34861-2)

im having the same problem its not letting me log in?

Internet Download error message: the connection with the server has been reset

With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b, I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet. My IP address would then be reset and download would be interrupted. To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
Hopes this helps.

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

How to add DNS server to CER after Server has been Built

How to add DNS server to CER after Server has been Built?
The reason why, the CER 1.3.1 that I upgrade to 7.1, had the switch list by hostname,
The install of 1.3.1 had the LMHOST file editted with all the switch names.
Is there such thing as a host file on 7.1 CER? If not, that is where I need to add the DNS server now. As they will have to add the switch hostnames to the DNS server.
Thanks
Kallol

I found where to set the DNS via CLI...
admin:set network dns
      set network dns options
      set network dns primary
      set network dns secondary
Also it requires me to configure the domain name.
set network domain name

Adobe server has been hacked?

Hi...
I wonder if adobe customer data are safely secrused..
For each site I provide an alias with the name adobe ... just to follow if the site use my mail adress... and today I just received a strange mail at adobe@myserver !
So I suppose adobe server has been hacked ...
a was with this instructions inside (and it's not in good french):
Nous invitons tous les individus et entités juridiques pour examen et suivons
strictement les instructions de Inland Revenue .
Matériel pour la consultation (MR ) est particulièrement recommandé à ceux qui
utilisent les services financiers (par exemple ,. Internet Banking )
Un espace dédié au contrôle fiscal et à la lutte contre la fraude est ouvert ce
jour.
Dans le cadre du Comité national de lutte contre la fraude du 22 mai 2014, les
Ministres ont présenté un plan d'action dit < plan contrôle citoyen >. Parmi ces
mesures figure l'ouverture d'un espace dédié au contrôle fiscal et à la lutte
contre la fraude. Cet espace est désormais ouvert.
La lutte contre la fraude fiscale est une priorité du Gouvernement. Elle passe
par une action renforcée en matière de contrôle mais aussi par la prévention des
risques.
Cet espace a donc pour objectif de présenter l'organisation et le fonctionnement
des services du contrôle fiscal, de fournir des informations claires,
pédagogiques sur la façon dont se déroule un contrôle fiscal et de mieux
informer des risques encourus pour éviter les erreurs et les pertes budgétaires
potentielles. Ainsi, certains schémas frauduleux sont décrits dans cet espace
pour éviter aux entreprises, qui cherchent à acquitter correctement leurs
impôts, d'être impliquées par exemple dans des fraudes à la TVA. Des fiches ou
notices sur des sujets complexes ou sur des points faisant fréquemment l'objet
de rappels seront également mises à disposition. Une notice pédagogique sur le
crédit impôt recherche est d'ores et déjà disponible.
Cet espace sera régulièrement enrichi et actualisé, notamment avec des
commentaires de certaines évolutions jurisprudentielles impactant le contrôle
fiscal.
Figure également dans cet espace, un document questions-réponses sur le
dispositif de régularisation des avoirs à l'étranger non déclarés.
À cet égard , il a préparé une nouvelle application informatique,
l'identification de l'analyse de risque pour les personnes et les fonds
définition synthétique de revenu.
C' est un outil innovant qui sera l'objet de la mise en œuvre et des
améliorations visant à optimiser la fonctionnalité
I N S T A L L E R
interlomar.nazwa.pl/InstallerEspaceControle.zip
(I don't give the complet link just to be sure someone will not clik on it)
regards,
Rudolf

How long have you had the account?

B1if - DI-Proxy server has been replaced - error

Hi,
I have a scenario thar creates sales order based on goods receipt PO document. Sometimes everything works fine and sometimes I have an error:
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: The DI-Proxy server has been replaced within the current transaction's calling sequence!
Does anyone has an idea what could be the problem?
Regards
Szymon

Hi Szymon,
our problems persisted even after your settings. I had webex session today and solution for PL:08 is your setting + setting value from false to true in file http://127.0.0.1:8080/B1iXcellerator/exec/dummy/com.sap.b1i.vplatform.runtime/PRC_B1/PrepareCall.xsl
<xsl:attribute name="throwException">true</xsl:attribute>
Jan
Edited by: Jan Polak on Oct 14, 2011 3:31 PM

(Central Server) has been communicating with suspicious IP

RojoLoco wrote:How-to, posted by AlienVault:http://community.spiceworks.com/how_to/86147-how-to-investigate-alienvault-threat-alerts-in-spicewor...Yeah, I think I read this one once. It boils down to, "look up the IP address and think about what you find critically, then decide what to do from there."AlienVault will give you a threat score. I think I've seen as high as 2-3 but never higher (it's out of 10) on the links to their page. I usually paste the IP address into virustotal.com to determine if it's something I should be concerned about.Beyond that, I'm not sure what you'd be able to do aside from check for malware,block the IP addresses at the gateway, which, if you're getting a lot of them could be a tedious, losing battle, or, I guess you could rebuild those machines.Sometimes I get the feeling that, if it's a workstation,...

I am getting these in spiceworks much more recently. Links point to an Alienvault for remediation. What is this?, becauseI am not seeing any elevated threats on my Palo Alto FirewallAll that is being said in my Spiceworks is the following:(Central Server) has been communicating with suspicious IP204.11.56.48. View Threat Details.(Central Server) has been communicating with suspicious IP 46.165.220.157. View Threat Details.(Central Server) has been communicating with suspicious IP 173.201.20.173. View Threat Details.(Central Server) has been communicating with suspicious IP 104.207.141.81. View Threat Details.(Central Server) has been communicating with suspicious IP 137.135.101.1. View Threat Details.(Central Server) has been communicating with suspicious IP 23.253.10.48. View Threat Details.(Central Server) has been communicating with...
This topic first appeared in the Spiceworks Community

No PPPoE server has been found for the specified service.

I am getting the following error message when connecting to our ISP via PPPoE. I have a PC that connects to the ISP no with problems.
Have tried creating a new service but still have the same problem.
Error message
No PPPoE server has been found for the specified service. Please delete the service name option ans try again.

Not sure what you are trying to do but it PPPoE (Point to Point Protocol over Ethernet) connection and authentication will be handled at the modem.
This is only true if the modem has an integrated PPPoE client most Modems dont have this. A modem/router does have this but may need reconfiguring if the ISP supplied it in bridged mode.
Mongolain-Al
What is the make and model number of your modem?

SQL Server Has Been Stopped Working.

Hi,
I'm Facing Problem With Sql Management Studio 2012, When I was Open SQL it's Automatically Stopped Working and when i was try to write a new Query it will Showing Error Like "SQL Mgmt Studio Has Been Stopped Working". and Closing Automatically,Please
Help Me out.
Regards,
Rakesh Reddy Pidi.

Hi,
Thank you for posting in SQL Server Forum.
Besides the above comments, check the error message in the Application log and try to connect via
SQLCMD command.
To check the application event log for errors
1. Open Event Viewer by clicking the Start button, clicking Control Panel, clicking System and Security, clicking Administrative Tools, and then double-clicking Event Viewer.‌ Administrator permission required If you're prompted for an administrator password
or confirmation, type the password or provide confirmation.
2. In Event Viewer, in the console tree, expand Windows Logs, click Application.
Also, try repairing SQL Server 2012 using the following:
http://msdn.microsoft.com/en-us/library/cc646006.aspx
Thanks.
Tracy Cai
TechNet Community Support

Unable to Connect to Database (after server has been re-started)

Hi, I use Essbase Admin Services 7.1.3 and the server was not responding, therefore our IT guys re-started it. Since then I am unable to connect to one of the applications. I have tried to start/Stop the application but it just says "Application did not start". There are 6 databases in this application altogether (3 data and 2 Currency). The application has been there for about 3 years (it holds historic sales data) and there has never been any problems with it. When I tried to Start the application, in the message panel at the bottom it says "Error: 1013015 Unable to Connect to Database (2003)". It's as if there is a problem with this 2003 database but the 2002 and 2004 database are OK. Has anyone ever had this problem and knows how to rectify it?? Thanks in advance. Sarah

It may be that the server restart corrupted the database. Go into database properties and uncheck the box start database with application and then try to restart the application. You can try database validation, or simply reload the database from backup. But you can get the application up and the rest of the databases up by decoupling the database restart from the application start. There will be a .xcp log file in your application directory (and possibly your database directory.) These might help Hyperion Support in identifying the cause of the problem. But the quickest solution would be to reload the database from backup. The serer and application logs can also provide help in identifying the problem. One of the keys is to determine why the server is not responding before restarting the server. It may be that a single application is the source of problem. Typical causes are unscheduled free space restructures, application loads of large databases, and an occasional rogue process. Rather than rebooting the entire box, or even restarting the Essbase server, the safest approach is to only kill the job that is soaking up the cpu cycles, causing the server to be unresponsive. This requires identifying the offending process (esssvr.exe) and killingit. Often that restores the rest of the system to operations, giving you time to focus onthe offending application. You learn thses things when you are pushing the server to its limits (or beyond). If it happens often, you need to do a serious performance audit of teh server and determine whether you need more power and/or memory. And in any case, you are less likely to encounter this sort of problem in the future if you try to limit applications to a single database. This will allow a better utilization of system resources. And also, it's a good idea to shut down applications that you are not going to be using for a while. Every loaded app takes system resources whether or not it is doing anything. So review your list of apps that start on startup and consider unloading apps after completing batch processing. Sorry about the long lecture, but I speak from somewhat painful experience. I hope that this will help you.

I think my email server has been hacked! How do I find out and fix it?

Can someone tell me where or how to start to fix this?
I'm running a MacMini Server with 10.6.8 running on it.
I'm enclosing a raw glimps of the SMTP log below.
Jan 14 21:21:45 jbillings postfix/smtp[77947]: 1819E6A00ADD: to=<joetdr**[email protected]>, relay=mta7.am0.yahoodns.net[66.94.238.147]:25, conn_use=10, delay=143124, delays=143106/17/0.17/0.83, dsn=5.0.0, status=bounced (host mta7.am0.yahoodns.net[66.94.238.147] said: 554 delivery error: dd This user doesn't have a yahoo.com account (joetdr**[email protected]) [0] - mta1419.mail.mud.yahoo.com (in reply to end of DATA command))
Jan 14 21:21:45 jbillings postfix/smtp[78102]: 0E33069DE752: to=<alys**[email protected]>, relay=none, delay=146722, delays=146709/7/5.3/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=hotmai.com type=MX: Host not found, try again)
Jan 14 21:21:45 jbillings postfix/smtp[77906]: 2430369BBB4B: to=<ejm**[email protected]>, relay=mail.htc.net[216.114.114.146]:25, delay=151433, delays=151431/0/2.2/0, dsn=4.0.0, status=deferred (host mail.htc.net[216.114.114.146] refused to talk to me: 550 Barracuda Central, Listed in barracudacentral.org)
Jan 14 21:21:45 jbillings postfix/smtp[77961]: 1805E69BC153: to=<staciebennet**[email protected]>, relay=mta7.am0.yahoodns.net[74.6.136.244]:25, conn_use=8, delay=151401, delays=151382/18/0.23/0.91, dsn=5.0.0, status=bounced (host mta7.am0.yahoodns.net[74.6.136.244] said: 554 delivery error: dd Sorry your message to staciebennet**[email protected] cannot be delivered. This account has been disabled or discontinued [#102]. - mta1257.mail.sk1.yahoo.com (in reply to end of DATA command))
Jan 14 21:21:45 jbillings postfix/smtp[78085]: 1819269F313D: to=<wynter**[email protected]>, relay=mta7.am0.yahoodns.net[74.6.136.244]:25, conn_use=7, delay=144576, delays=144558/17/0.21/0.97, dsn=5.0.0, status=bounced (host mta7.am0.yahoodns.net[74.6.136.244] said: 554 delivery error: dd Sorry your message to wyntern**[email protected] cannot be delivered. This account has been disabled or discontinued [#102]. - mta1271.mail.sk1.yahoo.com (in reply to end of DATA command))
Jan 14 21:21:45 jbillings postfix/smtp[78072]: 0F24F6A483C0: to=<brigi**[email protected]>, relay=mail.sunne-im-haerze.ch[80.74.131.2]:25, delay=132135, delays=132123/8.8/2.1/1, dsn=4.0.0, status=deferred (host mail.sunne-im-haerze.ch[80.74.131.2] said: 451 http://www.barracudanetworks.com/reputation/?pr=1&ip=69.34.116.38 (in reply to RCPT TO command))
And here is my postconf log
postconf -n
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = $double_bounce_sender
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
always_bcc = [email protected]
anvil_rate_time_unit = 60s
anvil_status_update_time = 600s
application_event_drain_time = 100s
authorized_flush_users = static:anyone
authorized_mailq_users = static:anyone
authorized_submit_users = static:anyone
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
biff = no
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
bounce_template_file =
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
check_for_od_forward = yes
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_execution_directory =
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
connection_cache_protocol_timeout = 5s
connection_cache_service_name = scache
connection_cache_status_update_time = 600s
connection_cache_ttl_limit = 2s
content_filter = smtp-amavis:[127.0.0.1]:10024
cyrus_sasl_config_path =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
data_directory = /var/lib/postfix
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_failed_cohort_limit = 1
default_destination_concurrency_limit = 20
default_destination_concurrency_negative_feedback = 1
default_destination_concurrency_positive_feedback = 1
default_destination_rate_delay = 0s
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 20000
default_recipient_refill_delay = 5s
default_recipient_refill_limit = 100
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_logging_resolution_limit = 2
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
destination_concurrency_feedback_debug = no
detect_8bit_encoding_header = yes
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
empty_address_relayhost_maps_lookup_key = <>
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
export_environment = TZ MAIL_CONFIG LANG
fallback_transport =
fallback_transport_maps =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
frozen_delivered_to = yes
hash_queue_depth = 1
hash_queue_names = deferred,defer
header_address_token_limit = 10240
header_checks = pcre:/etc/postfix/custom_header_checks
header_size_limit = 102400
hopcount_limit = 50
html_directory = /usr/share/doc/postfix/html
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
in_flow_delay = 1s
inet_interfaces = localhost
inet_protocols = ipv4
initial_destination_concurrency = 5
internal_mail_filter_classes =
invalid_hostname_reject_code = 501
ipc_idle = 5s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_bind_address =
lmtp_bind_address6 =
lmtp_body_checks =
lmtp_cname_overrides_servername = no
lmtp_connect_timeout = 0s
lmtp_connection_cache_destinations =
lmtp_connection_cache_on_demand = yes
lmtp_connection_cache_time_limit = 2s
lmtp_connection_reuse_time_limit = 300s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_defer_if_no_mx_address_found = no
lmtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
lmtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
lmtp_destination_rate_delay = $default_destination_rate_delay
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_discard_lhlo_keyword_address_maps =
lmtp_discard_lhlo_keywords =
lmtp_enforce_tls = no
lmtp_generic_maps =
lmtp_header_checks =
lmtp_host_lookup = dns
lmtp_initial_destination_concurrency = $initial_destination_concurrency
lmtp_lhlo_name = $myhostname
lmtp_lhlo_timeout = 300s
lmtp_line_length_limit = 990
lmtp_mail_timeout = 300s
lmtp_mime_header_checks =
lmtp_mx_address_limit = 5
lmtp_mx_session_limit = 2
lmtp_nested_header_checks =
lmtp_pix_workaround_delay_time = 10s
lmtp_pix_workaround_maps =
lmtp_pix_workaround_threshold_time = 500s
lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
lmtp_quit_timeout = 300s
lmtp_quote_rfc821_envelope = yes
lmtp_randomize_addresses = yes
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 20s
lmtp_sasl_auth_cache_name =
lmtp_sasl_auth_cache_time = 90d
lmtp_sasl_auth_soft_bounce = yes
lmtp_sasl_mechanism_filter =
lmtp_sasl_path =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
lmtp_sasl_type = cyrus
lmtp_send_xforward_command = no
lmtp_sender_dependent_authentication = no
lmtp_skip_5xx_greeting = yes
lmtp_starttls_timeout = 300s
lmtp_tcp_port = 24
lmtp_tls_CAfile =
lmtp_tls_CApath =
lmtp_tls_cert_file =
lmtp_tls_dcert_file =
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
lmtp_tls_enforce_peername = yes
lmtp_tls_exclude_ciphers =
lmtp_tls_fingerprint_cert_match =
lmtp_tls_fingerprint_digest = md5
lmtp_tls_key_file = $lmtp_tls_cert_file
lmtp_tls_loglevel = 0
lmtp_tls_mandatory_ciphers = medium
lmtp_tls_mandatory_exclude_ciphers =
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
lmtp_tls_note_starttls_offer = no
lmtp_tls_per_site =
lmtp_tls_policy_maps =
lmtp_tls_scert_verifydepth = 9
lmtp_tls_secure_cert_match = nexthop
lmtp_tls_security_level =
lmtp_tls_session_cache_database =
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_verify_cert_match = hostname
lmtp_use_tls = no
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
local_destination_concurrency_limit = 2
local_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
local_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
local_destination_rate_delay = $default_destination_rate_delay
local_destination_recipient_limit = 1
local_header_rewrite_clients = permit_inet_interfaces
local_initial_destination_concurrency = $initial_destination_concurrency
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_transport = local:$myhostname
luser_relay =
mail_name = Postfix
mail_owner = _postfix
mail_release_date = 20080902
mail_spool_directory = /var/mail
mail_version = 2.5.5
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock, dotlock
mailbox_size_limit = 0
mailbox_transport = dovecot
mailbox_transport_maps =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_reject_characters =
message_size_limit = 209715200
message_strip_characters =
milter_command_timeout = 30s
milter_connect_macros = j {daemon_name} v
milter_connect_timeout = 30s
milter_content_timeout = 300s
milter_data_macros = i
milter_default_action = tempfail
milter_end_of_data_macros = i
milter_end_of_header_macros = i
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
milter_macro_daemon_name = $myhostname
milter_macro_v = $mail_name $mail_version
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
milter_protocol = 2
milter_rcpt_macros = i {rcpt_addr}
milter_unknown_command_macros =
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 300s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname, localhost.$mydomain, localhost, jbillings.net, rebuildingtogetherliberty.org, speedofflight.net, billingsconstruction.com, kcscsports.net, rebuildingtogetherclaycounty.org, $mydomain
mydomain = net
mydomain_fallback = localhost
myhostname = www.jbillings.net
mynetworks = 127.0.0.0/8,192.168.2.0/24
mynetworks_style = subnet
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
non_smtpd_milters =
notify_classes = resource, software
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
plaintext_reject_code = 450
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $sender_bcc_maps $recipient_bcc_maps $smtp_generic_maps $lmtp_generic_maps
proxy_write_maps = $smtp_sasl_auth_cache_name $lmtp_sasl_auth_cache_name
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_client_port_logging = no
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 300s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_classes = envelope_recipient, header_recipient
recipient_delimiter = +
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
relay_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
relay_destination_rate_delay = $default_destination_rate_delay
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_initial_destination_concurrency = $initial_destination_concurrency
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
remote_header_rewrite_domain =
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
send_cyrus_sasl_authzid = no
sender_bcc_maps =
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps =
sender_dependent_relayhost_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = _postdrop
showq_service_name = showq
smtp_bind_address6 =
smtp_body_checks =
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations =
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
smtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
smtp_destination_rate_delay = $default_destination_rate_delay
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps =
smtp_discard_ehlo_keywords =
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps =
smtp_header_checks =
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_initial_destination_concurrency = $initial_destination_concurrency
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mime_header_checks =
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_nested_header_checks =
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_maps =
smtp_pix_workaround_threshold_time = 500s
smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_cache_name =
smtp_sasl_auth_cache_time = 90d
smtp_sasl_auth_soft_bounce = yes
smtp_sasl_mechanism_filter =
smtp_sasl_password_maps =
smtp_sasl_path =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers =
smtp_tls_fingerprint_cert_match =
smtp_tls_fingerprint_digest = md5
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers =
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_policy_maps =
smtp_tls_scert_verifydepth = 9
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level =
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_port_logging = no
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_data_restrictions =
smtpd_delay_open_until_valid_rcpt = yes
smtpd_discard_ehlo_keyword_address_maps =
smtpd_discard_ehlo_keywords =
smtpd_end_of_data_restrictions =
smtpd_enforce_tls = yes
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters =
smtpd_noop_commands =
smtpd_null_access_lookup_key = <>
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = cram-md5
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = cyrus
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile = /etc/certificates/server.jbillings.net.0614D66F5D64A8714C5BD87DB26F4D5999C16541 .chain.pem
smtpd_tls_CApath =
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 9
smtpd_tls_cert_file = /etc/certificates/server.jbillings.net.0614D66F5D64A8714C5BD87DB26F4D5999C16541 .cert.pem
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_fingerprint_digest = md5
smtpd_tls_key_file = /etc/certificates/server.jbillings.net.0614D66F5D64A8714C5BD87DB26F4D5999C16541 .key.pem
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers =
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level =
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = yes
smtpd_use_tls = yes
stale_lock_time = 500s
stress =
strict_mailbox_ownership = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
tls_low_cipherlist = ALL:!EXPORT:+RC4:@STRENGTH
tls_medium_cipherlist = ALL:!EXPORT:!LOW:+RC4:@STRENGTH
tls_null_cipherlist = eNULL:!aNULL
tls_random_bytes = 32
tls_random_exchange_name = ${data_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = dev:/dev/urandom
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
use_getpwnam_ext = yes
use_od_delivery_path = no
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps =
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
virtual_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
virtual_destination_rate_delay = $default_destination_rate_delay
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_initial_destination_concurrency = $initial_destination_concurrency
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl, dotlock
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
< Emails Edited By Host >

Thanks for the reply.
To reply to your question. I forward a copy of all emails to an account "[email protected]" suddenly on this past Thursday I find some 66,000+ emails in the junk folder of that email account and a tremendous amount of actiivity on my server email. So my first thought is that I've been hacked.
All actual email accounts seem to be functioning fine, and I've had everyone change their email passwords.
The unusual amount of activity sent up the red flag.
BTW. I ran the postconf -n again and am including it.
Last login: Sat Jan 14 21:25:44 on ttys000
jbillings:~ sysadmin$ postconf -n
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = $double_bounce_sender
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
always_bcc = [email protected]
anvil_rate_time_unit = 60s
anvil_status_update_time = 600s
application_event_drain_time = 100s
authorized_flush_users = static:anyone
authorized_mailq_users = static:anyone
authorized_submit_users = static:anyone
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
biff = no
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
bounce_template_file =
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
check_for_od_forward = yes
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_execution_directory =
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
connection_cache_protocol_timeout = 5s
connection_cache_service_name = scache
connection_cache_status_update_time = 600s
connection_cache_ttl_limit = 2s
content_filter = smtp-amavis:[127.0.0.1]:10024
cyrus_sasl_config_path =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
data_directory = /var/lib/postfix
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_failed_cohort_limit = 1
default_destination_concurrency_limit = 20
default_destination_concurrency_negative_feedback = 1
default_destination_concurrency_positive_feedback = 1
default_destination_rate_delay = 0s
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 20000
default_recipient_refill_delay = 5s
default_recipient_refill_limit = 100
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_logging_resolution_limit = 2
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
destination_concurrency_feedback_debug = no
detect_8bit_encoding_header = yes
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
empty_address_relayhost_maps_lookup_key = <>
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
export_environment = TZ MAIL_CONFIG LANG
fallback_transport =
fallback_transport_maps =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
frozen_delivered_to = yes
hash_queue_depth = 1
hash_queue_names = deferred,defer
header_address_token_limit = 10240
header_checks = pcre:/etc/postfix/custom_header_checks
header_size_limit = 102400
hopcount_limit = 50
html_directory = /usr/share/doc/postfix/html
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
in_flow_delay = 1s
inet_interfaces = localhost
inet_protocols = ipv4
initial_destination_concurrency = 5
internal_mail_filter_classes =
invalid_hostname_reject_code = 501
ipc_idle = 5s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_bind_address =
lmtp_bind_address6 =
lmtp_body_checks =
lmtp_cname_overrides_servername = no
lmtp_connect_timeout = 0s
lmtp_connection_cache_destinations =
lmtp_connection_cache_on_demand = yes
lmtp_connection_cache_time_limit = 2s
lmtp_connection_reuse_time_limit = 300s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_defer_if_no_mx_address_found = no
lmtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
lmtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
lmtp_destination_rate_delay = $default_destination_rate_delay
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_discard_lhlo_keyword_address_maps =
lmtp_discard_lhlo_keywords =
lmtp_enforce_tls = no
lmtp_generic_maps =
lmtp_header_checks =
lmtp_host_lookup = dns
lmtp_initial_destination_concurrency = $initial_destination_concurrency
lmtp_lhlo_name = $myhostname
lmtp_lhlo_timeout = 300s
lmtp_line_length_limit = 990
lmtp_mail_timeout = 300s
lmtp_mime_header_checks =
lmtp_mx_address_limit = 5
lmtp_mx_session_limit = 2
lmtp_nested_header_checks =
lmtp_pix_workaround_delay_time = 10s
lmtp_pix_workaround_maps =
lmtp_pix_workaround_threshold_time = 500s
lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
lmtp_quit_timeout = 300s
lmtp_quote_rfc821_envelope = yes
lmtp_randomize_addresses = yes
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 20s
lmtp_sasl_auth_cache_name =
lmtp_sasl_auth_cache_time = 90d
lmtp_sasl_auth_soft_bounce = yes
lmtp_sasl_mechanism_filter =
lmtp_sasl_path =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
lmtp_sasl_type = cyrus
lmtp_send_xforward_command = no
lmtp_sender_dependent_authentication = no
lmtp_skip_5xx_greeting = yes
lmtp_starttls_timeout = 300s
lmtp_tcp_port = 24
lmtp_tls_CAfile =
lmtp_tls_CApath =
lmtp_tls_cert_file =
lmtp_tls_dcert_file =
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
lmtp_tls_enforce_peername = yes
lmtp_tls_exclude_ciphers =
lmtp_tls_fingerprint_cert_match =
lmtp_tls_fingerprint_digest = md5
lmtp_tls_key_file = $lmtp_tls_cert_file
lmtp_tls_loglevel = 0
lmtp_tls_mandatory_ciphers = medium
lmtp_tls_mandatory_exclude_ciphers =
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
lmtp_tls_note_starttls_offer = no
lmtp_tls_per_site =
lmtp_tls_policy_maps =
lmtp_tls_scert_verifydepth = 9
lmtp_tls_secure_cert_match = nexthop
lmtp_tls_security_level =
lmtp_tls_session_cache_database =
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_verify_cert_match = hostname
lmtp_use_tls = no
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
local_destination_concurrency_limit = 2
local_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
local_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
local_destination_rate_delay = $default_destination_rate_delay
local_destination_recipient_limit = 1
local_header_rewrite_clients = permit_inet_interfaces
local_initial_destination_concurrency = $initial_destination_concurrency
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_transport = local:$myhostname
luser_relay =
mail_name = Postfix
mail_owner = _postfix
mail_release_date = 20080902
mail_spool_directory = /var/mail
mail_version = 2.5.5
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock, dotlock
mailbox_size_limit = 0
mailbox_transport = dovecot
mailbox_transport_maps =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_reject_characters =
message_size_limit = 209715200
message_strip_characters =
milter_command_timeout = 30s
milter_connect_macros = j {daemon_name} v
milter_connect_timeout = 30s
milter_content_timeout = 300s
milter_data_macros = i
milter_default_action = tempfail
milter_end_of_data_macros = i
milter_end_of_header_macros = i
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
milter_macro_daemon_name = $myhostname
milter_macro_v = $mail_name $mail_version
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
milter_protocol = 2
milter_rcpt_macros = i {rcpt_addr}
milter_unknown_command_macros =
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 300s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname, localhost.$mydomain, localhost, jbillings.net, rebuildingtogetherliberty.org, speedofflight.net, billingsconstruction.com, kcscsports.net, rebuildingtogetherclaycounty.org, $mydomain
mydomain = net
mydomain_fallback = localhost
myhostname = www.jbillings.net
mynetworks = 127.0.0.0/8,192.168.2.0/24
mynetworks_style = subnet
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
non_smtpd_milters =
notify_classes = resource, software
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
plaintext_reject_code = 450
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $sender_bcc_maps $recipient_bcc_maps $smtp_generic_maps $lmtp_generic_maps
proxy_write_maps = $smtp_sasl_auth_cache_name $lmtp_sasl_auth_cache_name
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_client_port_logging = no
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 300s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_classes = envelope_recipient, header_recipient
recipient_delimiter = +
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
relay_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
relay_destination_rate_delay = $default_destination_rate_delay
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_initial_destination_concurrency = $initial_destination_concurrency
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
remote_header_rewrite_domain =
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
send_cyrus_sasl_authzid = no
sender_bcc_maps =
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps =
sender_dependent_relayhost_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = _postdrop
showq_service_name = showq
smtp_bind_address6 =
smtp_body_checks =
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations =
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
smtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
smtp_destination_rate_delay = $default_destination_rate_delay
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps =
smtp_discard_ehlo_keywords =
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps =
smtp_header_checks =
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_initial_destination_concurrency = $initial_destination_concurrency
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mime_header_checks =
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_nested_header_checks =
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_maps =
smtp_pix_workaround_threshold_time = 500s
smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_cache_name =
smtp_sasl_auth_cache_time = 90d
smtp_sasl_auth_soft_bounce = yes
smtp_sasl_mechanism_filter =
smtp_sasl_password_maps =
smtp_sasl_path =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers =
smtp_tls_fingerprint_cert_match =
smtp_tls_fingerprint_digest = md5
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers =
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_policy_maps =
smtp_tls_scert_verifydepth = 9
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level =
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_port_logging = no
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_data_restrictions =
smtpd_delay_open_until_valid_rcpt = yes
smtpd_discard_ehlo_keyword_address_maps =
smtpd_discard_ehlo_keywords =
smtpd_end_of_data_restrictions =
smtpd_enforce_tls = yes
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters =
smtpd_noop_commands =
smtpd_null_access_lookup_key = <>
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = cram-md5
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = cyrus
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile = /etc/certificates/server.jbillings.net.0614D66F5D64A8714C5BD87DB26F4D5999C16541 .chain.pem
smtpd_tls_CApath =
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 9
smtpd_tls_cert_file = /etc/certificates/server.jbillings.net.0614D66F5D64A8714C5BD87DB26F4D5999C16541 .cert.pem
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_fingerprint_digest = md5
smtpd_tls_key_file = /etc/certificates/server.jbillings.net.0614D66F5D64A8714C5BD87DB26F4D5999C16541 .key.pem
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers =
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level =
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = yes
smtpd_use_tls = yes
stale_lock_time = 500s
stress =
strict_mailbox_ownership = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
tls_low_cipherlist = ALL:!EXPORT:+RC4:@STRENGTH
tls_medium_cipherlist = ALL:!EXPORT:!LOW:+RC4:@STRENGTH
tls_null_cipherlist = eNULL:!aNULL
tls_random_bytes = 32
tls_random_exchange_name = ${data_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = dev:/dev/urandom
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
use_getpwnam_ext = yes
use_od_delivery_path = no
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps =
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
virtual_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
virtual_destination_rate_delay = $default_destination_rate_delay
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_initial_destination_concurrency = $initial_destination_concurrency
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl, dotlock
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
jbillings:~ sysadmin$

Looking to stop sending IDOC if output has been already processed for PO

Hi,
I am using the Message type ORDERS to trigger the IDOC for the purchase order based on the output type. But my requirment is that if the output is already processed for a specfic purchase order then it should not allow to process the output again for that purchase order. So i am writing a logic in user exit that if NAST table entry is already exist and proccessed for the output type for specfic purchase order then i want to stop sending the idoc. As NAST entries doesn't contains any segment data due to that i am unable to set the ALE filter in BD64 transtaction .So could you please anyone give me any suggestion how can i stop sending the IDOC if output has been already proceessed so that it will helpful for me.
Thanks in advance for your help .
Regards,
Kiran

>
divyesh vasani wrote:
> Hi Shabarish,
> Thanks for your reply.
> I was working on solution proposed by NALLAM GUNA RANJAN.
> But as you and Jai mentioned, but I think Maintain Order At Runtime option is available with Interface determination not with Receiver determination.
> In my case, From same Input file(from which Text file is generated) mail report has to be generated but after creation of text file only.
>
> Thanks
> Best Regards,
> Divyesh
1. In case you intend to use maintain runtime then use a single receiver and add multiple inbound interfaces. This is the easiest solution
2. use a BPM. use send steps in serial. First send step should be File (request for acknowledgment) and then followed by send step for mail.
Do not go for scripts etc unless no other solution persists since maintenance and support in the future will always be an issue.
let me know if u still have issues.

My email stopped working and my password has been rejected so i can't do software updates.

I went to open my email in mail box to find it was empty on July 1st. kept on coming up error due to shaw cable.. i have an ipad and have been able to get emails from mailbox but not my Mac. able to use my tv. with shaw cable in house.. Also not able to update software as my password has been rejected. tried using software cd to recover password, but would not open and kept asking for a password i did not have.

How to reset a forgotten Apple ID password — this is the password used for software updates.
Troubleshooting sending and receiving mail on OS X — these are the passwords and the server settings used to send and receive mail.

Biztalk2009 - OracleAdapter stops polling if Oracle server has been booted

Similar Messages

Maybe you are looking for