Bizzare error message requests me "Select a log file" for .vi

Hi
I am getting a very strange pop-up with my vi that requests me to select a log file for the VI.
If I hit cancel I get the pop-up "Cannot log front panel of vi. there is no log file associated with the vi"
I don't want a log file.
There must be some background setting in the VI that is not in the actually Lab-VIEW code.
Does anybody know how I can switch this off?
Many thanks
Ashley

Off the top of my head I can only think of one setting that may cause this. You can set a VI to log its front panel data automatically. Go to Operate>>Data Logging and check the settings there. Also look at Operate>>Log at Completion.
It may also be that you have this set on a subVI, and if so you will see a yellow "halo" around one of your subVIs, meaning you have turned on database access. You can look in the help for Logging Data>> On the front panel that discusses this behavior.
If you wrote the VIs and have no idea what I am talking about with the Database Access that is fine, it is not a commonly used feature.
If none of these help can you attach the VI so we can all see it.

Similar Messages

Internal Error has occurred. Check the log file for details.

Hello Experts,
After installing Oracle 11g R2 in Windows XP (32-bit), I get the following error message when logging into https://localhost:1158/em - "Internal Error has occurred. Check the log file for details." I have extracted the following files onto one directory and used it for installation: win32_11gR2_database_1of2.zip, win32_11gR2_database_2of2.zip, p10098816_112020_WINNT_1of6, p10098816_112020_WINNT_2of6, p10404530_112030_WINNT_1of6, p10404530_112030_WINNT_2of6. I get no errors during the install. I selected "Create and configure a database". I selected "Desktop Class". I took the default locations (in step 5). Can someone please assist me?
Thank you.

internal error occur with some java exception?. some tabs are accessed like administration and when you click on performance than you are get logout??
this is the problem which you are facing??>

Internal Error has occurred . Check the log file for details 11g r2 on windows 8 64bit

Hi Friends,
I Have just installed on my laptop
Database : oracle 11g 64bit , on windows 8 64bit
I was successfully able to install the Database without any problem... I am able to connect from command prompt both as sys and hr user....
But when I tried to connect through EM by sys credentials...
https//localhost:1521/em
I am getting Error Internal Error has occurred . Check the log file for details....
When I checked the emoms.trc this the last few lines...
https://localhost:3938/emd/main:A००००००००३३.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 32 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:35,544 [MetadataLoad https://localhost:3938/emd/main:A००००००००३४.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 33 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:36,275 [MetadataLoad https://localhost:3938/emd/main:A००००००००३५.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 34 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:57,105 [MetadataLoad https://localhost:3938/emd/main:A००००००००३६.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 35 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:57,832 [MetadataLoad https://localhost:3938/emd/main:A००००००००३७.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 36 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:58,625 [MetadataLoad https://localhost:3938/emd/main:A००००००००३८.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 37 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:02,529 [MetadataLoad https://localhost:3938/emd/main:A००००००००३९.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 38 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:03,307 [MetadataLoad https://localhost:3938/emd/main:A००००००००४०.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 39 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:04,107 [MetadataLoad https://localhost:3938/emd/main:A००००००००४१.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 40 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
Thanks and Regards

You could try reading what I said: change the port in the URL to 1158.
My release of windows is this,
c:\Users\John>ver
Microsoft Windows [Version 6.2.9200]
c:\Users\John>
You can ignore that junk about editions.
And by the way, there is a problem with your keyboard, it keeps inserting multiple "...." character strings.

WD app Deployment Error - Where can we find J2ee log file for linux install

Hi,
I have a problem with deploying a web dynpro application. There are no errors before deployment but when I deploy the application, I get a deployment error with the following description.
I tried to view the trace or log file but we have SAP installed on a linux OS and I do not know where can we see the log or trace file. Please help.
Version:
SAP NW 2004s SP15
NWDS 7.0
xRPM 4.5
Error Description:
May 14, 2008 12:49:50 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager)
[Thread[Deploy Thread,5,main]] ERROR:
[008]Deployment aborted
Settings
SDM host : BS307
SDM port : 50718
URL to deploy : file:/C:/DOCUME1/SMULLA1/LOCALS~1/Temp/2/temp20045SempraDemo4.5.ear
Result
=> deployment aborted : file:/C:/DOCUME1/SMULLA1/LOCALS~1/Temp/2/temp20045SempraDemo4.5.ear
Aborted: development component 'SempraDemo4.5'/'local'/'LOKAL'/'0.2008.05.14.00.49.36'/'0':Caught exception during application deployment from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Cannot deploy application local/SempraDemo4.5.. Reason: Clusterwide exception: Failed to deploy application local/SempraDemo4.5. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/SempraDemo4.5. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine? (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted
Edited by: Subramanya Srinivas Mullapudi on May 14, 2008 8:34 AM

Hi Reza,
Hope you are doing good.
You can set the trace level in the SAP/Java Gui dynamically :
Call transaction SMICM
Choose the menu Goto → Trace Level → Set
In the pop-up window, set the desired level (0,1,2,3)
To switch on an /nSMICM or ICM HTTP trace via command line you should go to
usr\sap\<SID>\<instance_number>\exe directory and run the icmon program with the following command:
icmon◦◦pf=\usr\sap\<SID>\SYS\profile\<SID>_<instance_name>_<HOST>
where you fill in the SID, instance name and host corresponding to your system.
The icmon program is interactive and to increase trace level you must write
"+" and pres enter.To quit you must write "q" and press enter.
The trace will be written◦to the following file: usr\sap\<SID>\<instance_number>\work\dev_icm
Thank you!
Kind Regards,
Hemanth
SAP AGS

FND LOG messages are not printing in LOG file for Concurrent program

Hi,
I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
Any suggestions.
FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');
Thanks.

I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
Any suggestions.
FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');Do you have COMMIT in your code?
https://forums.oracle.com/forums/search.jspa?threadID=&q=%27FND_FILE.PUT_LINE%27+AND+commit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

I keep getting an error message when I try to log into to ExportPDF through my Adobe Reader. "Network error occurred while attempting to sign in". Can anyone help, please?

I keep getting an error message when I try to log into to ExportPDF through my Adobe Reader. "Network error occurred while attempting to sign in". Can anyone help, please?

Hi Simon,
I'm sorry to hear that you're having trouble logging in to ExportPDF via Reader. I've checked your account, and all is well there.
For starters, please make sure that you have the most current version of Reader installed by choosing Help > Check for Updates.
If you're still having trouble logging in via Reader, please try logging in to the web interface at https://cloud.acrobat.com.
Please let us know how it goes.
Best,
Sara

I keep getting the iTunes error message "the item selected is not available in the UK store" how do i fix this please ?

I keep getting the error message " The item selected is not available in the UK store" and i am not able to do anything else with iTunes, any idea how i fix this as it appears to now be restricting my account access across the Mac Book, iPad, iPhone and Mac Mini in the house ?
Thanks

Hi Thanks,
I could only see posts from some months ago and thought I had something different.
Looks like I have not been using the correct search terms.
Will wait and see what happens.

Error message at the selection screen while processing screen logic

Hi All,
I need to show error message at the selection screen.
I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
Since I am in the middle of the screen processing whenever I am giving a error message.
Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
Regards,
Mahesh

hi
If u are trying to validate a field use
AT SELECTION_SCREEN ON <field>
if want to validate a block
AT SELECTION SCREEN ON <block>
If Universal Validation
AT SELECTION SCREEN
and display a 'E' Message inside the block.
You can Enter Correct Value and start processing Forward.
hope this will help.
Regards
Sumit Agarwal

HT2433 what does the error message that says " You are logged out because another computer is using this IP address." mean?

what does the error message that says " You are logged out because another computer is using this IP address." mean?

Some other piece of network ghardware on your home LAN (Local Area Network) is using the IP address your Mac is trying to use.
Reboot both your modem and router, or the Modem/Router combo box you have, and all pieces of networking equipment, computers and printers, you have connected to your LAN.
If you continue to get that error then it is a bug in OS X or you have your Mac set to a Static IP address that is being handed out by the routers DHCP server to some other device.

[svn:bz-trunk] 14330: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

Revision: 14330
Revision: 14330
Author:   [email protected]
Date:     2010-02-22 10:03:03 -0800 (Mon, 22 Feb 2010)
Log Message:
BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
QA: no
Doc: no
checkin test : pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-476
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

Hi, wbracken ,
As known, there are 2 different questions I raised.
Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
Any way, your reponse was appreciated.
Thank you for the help.

[svn:bz-trunk] 14341: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

Revision: 14341
Revision: 14341
Author:   [email protected]
Date:     2010-02-22 13:19:46 -0800 (Mon, 22 Feb 2010)
Log Message:
BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-476
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java
    blazeds/trunk/modules/core/src/flex/messaging/util/ClassUtil.java

Hi, wbracken ,
As known, there are 2 different questions I raised.
Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
Any way, your reponse was appreciated.
Thank you for the help.

I just started getting the error message below - when I drag a file to TRASH, I get the message "Finder wants to make changes. Type in your password to allow this. Why ? and how to to stop this request ?

I just started getting the error message below, when I drag a file to TRASH, I get the message "Finder wants to make changes. Type in your password to allow this." Why ? and how to to stop this request ?

There should be nothing native to the OS X which would ask for a password
or other information on a restart, unless accompanied by the traditional login
box with your user name.
There are adware or marginal products that could be called malware (bad)
that would impose their presence and some items that could have been
downloaded by accident or through some corrupted free software site; of
those some could ask for and gain permission to go through your Mac
and maybe even run in the background to do other nefarious misdeeds.
You could see if startup in SafeBoot allows you access past that the Completer.
Since I don't have a pile of helpful article links on how to resolve various issues
I'd be looking them up one way or another.
There are some helpful items in the site http://thesafemac.com - see Tech Guides
listed (adware, malware, & performance) plus a link to the adwaremedic page.
Also, Apple support has a helpful page on how to remove adware and other bits:
•Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
Hopefully this helps somewhat.
Good luck & happy computing!

Getting an error message when they try to log into the Discussion Board

I know this is not MacBook related, or maybe it is, since I have a MacBook. Anyway, this is the Discussion board I visit the most, so I thought I would post here.
When I try to log in to the Discussion Board, I fill in my User Name and Password and press the Log In button and then the next screen comes up with an error message. I have successfully logged in, but I am not taken back to the Discussion Board I left. This is the message:
"Error
An error has occurred. We apologize for the inconvenience.
Useful links:
* Forum Home -- browse the forums here.
* Search Forums -- visit the search page to query all forum content."
Is anyone else seeing this? If so, how do I correct it? This is happening on Safari 3 and also with Camino. Thanks.
Thom

Hi all,
just as a hint:
There is a whole Forum for things related to the Discussion Board.
See here: http://discussions.apple.com/forum.jspa?forumID=1076
As for the error you get, I get it also.
According to the a.m. Forum, Apple knows about this error and is trying to fix it.
Have Fun
Stefan

Error Message Reboot and select proper boot device: C50-B-13N

Hello All,
My recently-purchased C50-B-13N laptop was installing 39 updates yesterday, when it crashed.
Re-starting trapped me into a continual loop. Following what appeared to be the logical approach to reset the factory settings, I
appear to have accidentally deleted the data on the drive.
I now repeatedly received the error message "Reboot and select proper boot device".
I've tried the F12 approach to <HDD recovery>, but my Boot Menu doesn't state this option.
I'm frustrated that the new laptop was performing so poorly, given I've had Toshiba devices for ~10 years. Additionally, I'm disappointed that the potentially serious implications of deleting the drive <even accidentally> were not clearly advised to me, before commencing.
Please advise a solution.
The laptop is 4 months old, so presumably, is covered by warranty.
An unhappy customer experience, thus far.
Regards,
DG.

Satellite C50-B-13N (PSCMLE-02001DEN)
I've tried the F12 approach to <HDD recovery>, but my Boot Menu doesn't state this option.
If you failed to create recovery media, you may need to order it from Toshiba.
Toshiba Europe Backup Media Online Shop
For instructions, see the section Restoring the pre-installed software from your created Recovery Media, which begins on p. 5-14 of the User's Manual (attached).
-Jerry
Attachments:
C50-B_C50T-B_ C50D-B_EN.pdf ‏2838 KB

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

Bizzare error message requests me "Select a log file" for .vi

Similar Messages

Maybe you are looking for