Blacberry 10.3 release for z30 in Singapore

I am keen to try the 10.3 OS on my z30. While the OS has been released in US, there is no availability of the new OS in Singapore.
Would you know the expected release date for 10.3 OS for Z30.

akdwivedi wrote:
I am keen to try the 10.3 OS on my z30. While the OS has been released in US,
Hi @akdwivedi! Welcome to the BlackBerry Support Community Forums!
OS 10.3 has been released with the BlackBerry Passport and P'9983 not the Z30 or any other early BlackBerry 10 devices.
akdwivedi wrote:
....there is no availability of the new OS in Singapore.
Would you know the expected release date for 10.3 OS for Z30.
The Z30 will not receive the 10.3 update. It will receive the 10.3.1 build. It will start rolling out on early February, subject to carrier approval.
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Similar Messages

Report to show invoice documents those were released for payment

Hello Gurus,
Could anybody help on the below requirement?
Is it possible to run a report that would list invoices that were released for payment that had had a block on them?? Example: an invoice is waiting on a goods receipt and it is posted. Once the receipt is posted the Invoice Exception Analyst release the block on MRBR. Is there a report that we can run to show what was released on any certain day or period??
Thanks,
Amol

hi,
Go to MIR5...
Here drop the list by clicking the button near origin n status...here tick on the manually accepted button...
Then in the main window itself click on the posted as invoice status....Enter the date as posting date and execute...it will show you the list...
Regards
Priyanka.P

API or interface table to create releases for a blanket purchase agreement

Hi
I need to know if Oracle provides a standard API or interface table to create releases for a blanket purchase agreement.
I tried using the release_num field in PO_HEADERS_INTERFACE, PO_LINES_INTERFACE. But this is not working.
I'm able to create the blanket purchase agreement using the open interfaces, but not the releases.
Regards,
Alister

Hi Alister,
You can't create a release of a BPA through API, there is no such APIs provided by oracle.
Where as you can create a BPA by using API. You need to dump/poplulate data in PO_headers_interface & PO_Lines_intreface table.. Then use Purchasing Documents Open Interface API to create a BPA.
Regards,
S.P DASH

Report to show invoice document which were release for payment

Hello Gurus,
Could anybody help on the below requirement?
Is it possible to run a report that would list invoices that were released for payment that had had a block on them?? Example: an invoice is waiting on a goods receipt and it is posted. Once the receipt is posted the Invoice Exception Analyst release the block on MRBR. Is there a report that we can run to show what was released on any certain day or period??
Thanks,
Amol

hi,
Go to MIR5...
Here drop the list by clicking the button near origin n status...here tick on the manually accepted button...
Then in the main window itself click on the posted as invoice status....Enter the date as posting date and execute...it will show you the list...
Regards
Priyanka.P

Wanted a new item to be released for Blanket PO instead of old item

Hi All,
I have a requirement :
A new item (B) is replaced for an old Item (A), ie the purchasing flags are disabled for the old Item (A).
And the item releationships for the Old and New Item are defined in inventory.
There are few Open Blanket PO's where the old item is present in the Po's,now we wanted to release a PO for the new item instead of old item in the PO.
Client don't want to update the new item to the old item.
Please let us know how to use this functionlality.And the steps /setups to achive this.
Thanks
Sreekanth

Hi Sreekanth,
I guess your requirement is not achievable...
As long as the item is present in BPA then the same item will be defaulted in Release...we cannot use new item here even touch we have item relationship.
if you require a new release for the new item then you need to create a new BPA.
I guess Item releation ship wont work here.
I tried to work it out thru sourcing rules by creating a BPA with old item and putting new item in assign sourcing rule window....but while releasing thru autorelease old item got defaulted in the new release.
HTH
-Arif.

Error: no product cost estimation possible, at the releasing for accounting

Hi Guru,
while releasing for account in billing document for the finished product.Shows Error as:"no product cost estimation not allowed". Thou I cheked configuration checking of costing key in COPA and costing variant of relevant one looks fine. Plz guide me further more configuration and basic settings needed in to solve this task.
Thanking u in advance
Murali.

Pawan,
Thanks for your quick reply.
I have done those change also, still it is coming same as " No Product cost estimate was found". check you costing key 100 in COPA configuration. i have checked costing key configuration , in that costing varinat PPC1, Costing Version 1, Period/Indicator as "Current Standard cost estimate Acc. to entry in Material Master" .
How to fix this, guide me
Sateesh

When the update to support LTE will be released for Claro in the Dominican Republic?

Claro in the Dominican Republic has launched LTE (since yesterday) and proceeded to sell or give the 4G LTE Sim cards so the users can have the service. I went over, got my new sim card and inserted in my Iphone 5 (A1428), and said to my self "I'm good to go". Turns out I wasn't. Unfortunately, I could not get it working. I even moved around the city to see where I could get 4G coverage.
When I called customer service to argue about the lack of coverage and to discuss that this may be a scam from the company. The customer service person told me to go to settings>cellular> to toggle Enable LTE, and I replied that I did not have that option. Then the customer service clerk argued that I did not have an updated Device. My iphone 5 IOS version is 7.1.2.
After doing some research while on the phone with the customer service representative (it was a 45 min long call) I had to agree with him that maybe apple has to "released" or "enabled" the service for this specific carrier, just like it happened in Colombia when the LTE was introduced.
Currently there are 3 companies (Tricom, Orange, and now Claro) offering 4G LTE in the Dominican Republic and None are listed in the 4G LTE availability per device per country according to apple. https://www.apple.com/iphone/LTE/.
So my question is: When the update to support LTE will be released for Claro in the Dominican Republic? (it would be great if an apple employee could get involve in this thread, or escalated it to who can do something about it.)

FelipeV
Let me tell you something: no one is saying go and do something illegal to enable this feature on your phone and no one is reporting any confidential information; the purpose of this thread is to clarify some points:
The LTE Network for Claro DO is real, is functional and is not a Scam
The LTE Network works with compatible devices except iPhones, not by decision of the carrier but the manufacturer.
About that the date that when will be available is not a confirmed date, it's an estimate based on previous releases in other countries and information that I received from inside Claro, not a speculation (find the definition). Of course Claro hasn't confirmed because, like other says, is apple decisions and not their (you don't have to be a genius to figure that out).
Forums are to express yourself freely about a specific topic, and to give your point of view whether you agree or disagree with something, but when you do be polite and do it with respect and not with arrogance as you just did hinting others are stupid and do not know what they are doing. Take an advice from some one with a little bit of experience, you don't know when you will need some help.
Have a good night.

GeoRaptor 3.2.1 Released for SQL Developer 3.x

Spatialites!
After 6 months of development and testing, GeoRaptor 3.2.1 has been released for SQL Developer 3.x (tested on 3.0, 3.1 and 3.2). This release no longer supports SQL Developer 1.x or 2.x releases due to internal changes to the SQL Developer APIs.
GeoRaptor can be downloaded from the GeoRaptor project's sourceforge page: http://sourceforge.net/projects/georaptor and installed via Help>Check for Updates>Install from Local File. Installation via SQL Developer's update mechanism should be available soon.
The release notes for this release are:
* Fixed issues with validate geometry functionality in particular the update dialog box.
* Revamped "About GeoRaptor" form. Includes clickable URLs, links to mailing lists, version number listing, thanks to testers etc.
* Placed "About GeoRaptor" icon on GeoRaptor's map toolbar.
* SQL Developer NLS settings accessed: improvements in the display and entry and numeric data.
-- Tolerances in Spatial Layer properties will display with the NLS decimal separator eg 0,05.
     Some parts of GeoRaptor such as Validation that show and accept numbers have not been changed from when someone else modified the code.
     If you double click on the left MBR/right MBR icon in the map at the bottom, the current centre position will display according to the NLS settings.
     Editing the value to jump the map to that point works even with grouping separators and decimal separators being commas!
* Spatial Layer Draw has been modified to use NLS based decimal formatting.
* New geometry marking/labelling options have been added. In particular you can now label the vertices of a linestring/polygon with the following additional elements:
-- Cumulative length
-- Measure (M)
-- Z value
-- Labelling of vertices with <id>{X,Y} now also honours 3/4D geometries. If geometry has XYY then it will be labelled as {X,Y,Z} etc.
* You can also label each vector/segment of a linestring/polygon with:
-- Length
-- Cumulative Length
-- Bearing (approximate for geodetic/geographic data)
-- Distance (approximate for geodetic/geographic data)
-- Bearing and Distance (approximate for geodetic/geographic data)
* The font properties of the mark text can be changed independently of the feature label. This includes the offset and label position (CC, LL, UR etc).
* New feature labelling options have been provided:
-- First/middle/last vertex,
-- Any supplied sdo_point within a line/polygon's sdo_geometry object, or
-- Calculated by GeoRaptor on the client side using Java Topology Suite.
* Result sets now have the ability to:
-- Copy to clipboard all geometries across many rows and columns.
-- Display one or more (selected) geometries in a popup image window. This functionality is also available in the result set generated by an Identify command.
* New GeoRaptor Preferences:
-- Width and height in pixels of the new popup image window (displaying one or more geometry objects) can be set;
-- Colours of orphan, missing and correct metadata entries for Metadata Manager;
-- Prefixing with MDSYS for all currently supported spatial objects - sdo_geometry, sdo_point, sdo_elem_info, sdo_ordinates, sdo_dim_info - has been made an option.
-- There is now a new property called "Show Number Grouping Separator" in Tools>GeoRaptor>Visualisation.
     If it is ticked a number will be formatted with the thousands separator in Tools>Database>NLS eg 10000.000 will display as 10,000.000.
* Sdo_Geometry display of all spaces in text between elements of the sdo_geometry array have been removed.
   This was done mainly to compact the sdo_geometry strings so that they are as small as possible when displaying or copying to clipboard.
* Help pages added to the following dialogs with more to follow:
-- Metadata Manager,
-- Shapefile Importer and
-- Layer Properties dialogs.
* GeoRaptor menu entries renamed. New "Manage All Metadata" entry added to View>GeoRaptor menu.
* Spatial Index creation dialog now supports additional index parameters and parallel build settings.
* Metadata Manager overhauled:
a. Shows:
     1. Metadata entries which have no underlying oracle object (orphan)
     2. Metadata entries for existing underlying objects (existing case)
     3. Database objects with sdo_geometry for which no metadata entry exists (new)
b. All orphan/existing/missing colours for (a) can be set via Preferences>GeoRaptor>Visualisation
c. All actions for main (bottom) metadata table are in a single right mouse click menu.
     Some entries will only appear if a single row is selection (metadata copy), others (delete and copy to clipboard) will appear for one or more.
d. Can now switch between open connections to modify metadata of other objects in schemas other than the starting object.
e. Buttons revamped.
* Tab/Shapefile export:
a. Export now supports NULL valued columns. Can be exported as an empty string (if DBase override in GeoRaptor Preferences is ticked) or
     as a predefined value eg NULL date => 1900-01-01 (set in new GeoRatptor Import/Export Preferences).
b. Some work attempted on export of NLS strings (still not corrected).
c. Objects with no rows now correctly processed.
* Shapefile Import
-- Bug relating to Linux file names corrected.
* Fixed issue (identified by John O'Toole) with spatial index underlying a view not being used in map display.
* Reinstated sdo_nn as the principal method for Identify (requested by John O'Toole).
* Fixed problem with handling single click zoom in and out in GeoRaptor map etc.
* Fixed problem with rendering lines from database item (identified by Vladimir Pek).The new "About GeoRaptor" should be read by all people installing GeoRaptor.
Please, please consider registering your email address with our private email list so that we can get a feel for the sorts of people downloading and installing GeoRaptor.
Please consider helping us with documentation or the internationalisation via translating properties files from English to your native language.
GeoRaptor is written and maintained by people who use SQL Developer and Spatial every day but we don't pretend we know everything that users want: please let us know via our feature request page at SourceForge.
We don't get paid for what we do so are always looking for additional help.
Here are some of the requests we have had for improvements:
1. MySQL access
2. WMS access;
3. Ability to import shapefile data into an existing table;
4. Ability to processing multiple shapefiles into separate tables (current version can import one or more into a single target table);
5. Ability to export/import layer definitions to give to others;
6. Support for non-English character sets for varchar exports to shapefiles.Some are relatively simply, some require a lot of engineering work. For the latter, we are considering alternative funding methods to the currently completely free development approach.
Thanks to the following for their invaluable assistance:
Holger Labe, Germany
John O'Toole, Ireland
Vladimir Pek, Czech Republic
Pieter Minnaar, Holland
Olaf Iseeger, Germany
Sandro Costa, Brazil;
Marco Giana, Australia.regards
Simon Greener
Principal GeoRaptor Developer
Edited by: Simon Greener on Sep 10, 2012 2:43 PM

Simon,
I will admit, I almost never use SQL Developer. I have been a long time Toad user, but for this tool, I fumbled around a bit and got everything up and running quickly.
That said, I tried the new GeoRaptor tool using this tutorial (which is I think is close enough to get the jist). http://sourceforge.net/apps/mediawiki/georaptor/index.php?title=A_Gentle_Introduction:_Create_Table,_Metadata_Registration,_Indexing_and_Mapping
As I stumble around it, I'll try and leave some feedback, and probably ask some rather stupid questions.
Thanks for the effort,
Bryan

Payment Release for Vendor

Dear Gurus,
Please help on the below issue.I had made standard release for payment configuration and assigned the workflows.When am doing vendor invoice work flow is triggering but getting an error.
Error in workflow Customizing of payment release
Message no. FP162
Diagnosis
The system could not determine a subworkflow for the payment release. Check the workflow Customizing for the payment release, in particular the settings for transaction OBWE and the preceeding settings.
The message is output from the method SUBWFDETERMINE of the BOR object BSEG.
System response
The workflow was started, but the system could not create an executable dialog workitem for the line item payment release. However, you cannot release the document directly, it must be released in the workflow. A subworkflow for the payment release must be determined in the sample workflow WS00400012; the clerks are determined in role 00400125.
Role 00400125 is based on the function module PR_WF_ACTOR1_DET.
Procedure
Change the payment release Customizing in Accounts Payable/Accounts Receivable Accounting. SAP delivers a sample subworkflow for payment release, WS00400011.
Procedure for System Administration
Restart the incorrect workflow (transaction SWPR) once you have maintained the Customizing for the payment release.
Need your help.
Thanks & Regards,
Mohdsams
Edited by: mohdsams on Sep 9, 2011 2:56 PM

Dear Gurus,
I am generated workflow and it is completed, can anyone suggest me how to release the payment and post vendor payment document.
I tries in MRBR, it give no item available. Please help.
regards,
mohdsams.

Problem with creating release for Scheduling agremenyt

Hi
iam getting this error while generating release for the delivery schedules
the error details are " Reason no:25 reason:06 857 No Message record found"
How to solve this issue i have maintained teh release profile and assigned to schedulin agreement additional datas.
Is generating release is just communication to vendor about delivery schedules.If teh schedulking agreement type is LPA(with release) then after generating release only is it possible to do GR for the delivery schedule lines.

Hi,
It is linked in the message config in the SPRO
MM > Purchasing > Messages > Output control > Message determination schema > Define message determination schemas for Scheduling agreeement release.
When you have checked this you will see the condition types that are relevant, go to MN10 and make sure that you have an entry for each condition type that you are using.
Steve B

Release for blocked invoices (Ref: Q4-6)

Dear Sirs,
After executing the u201CRelease for blocked invoicesu201D using transaction MRBR, the u201CManual Blocku201D indicator can be released in Invoice Header u2013 Payment tab. However, the indicator was still checked in Invoice Item(s). Even if I created an Invoice by setting the u201CManual Blocku201D in items only, the indicator was still checked after executing the u201CRelease for blocked invoicesu201D. Is it normal for the standard system ?
Tks,
KH Fong

Dear Sirs,
Thanks for your reply.
Does it mean that theu201CManual Blocku201D indicator is still checked for the Item(s) even if I have executed theu201CRelease for blocked invoicesu201D using transaction MRBR ? (No matter the u201CManual Blocku201D indicator is set for both Header & Item(s), or just set for Item(s) only in the Invoice)
Does it mean that the whole Invoice can be released for payment even if theu201CManual Blocku201D indicator is still checked for the Item(s) after executing the MRBR ?
Does it mean that setting theu201CManual Blocku201D indicator at Header Level is enough if I would like to block the whole Invoice ?
Tks,
KH Fong

Workflow WS00400012 Release for Payment not getting triggred

Hi,
As mentioned in the help docs we have done the following settings for Release for payment, yet the Workflow is not getting triggered.
SPRO->Financial Accounting (New)->Accounts Receivable and Accounts Payable->Business Transactions->Release for Payment
Create Workflow Variant for Release for Payment
XX01     WS004MSBT Payment release
     Workflow var.   XX01
     Currency        INR
     WF var.name     WS004MSBT Payment release
     Prelimenary posting release
      Release from    1.00
      Subworkflow     WS00400012
     Payment release
     Release payment          X
     Creater permitted          X
      Payt release    1.00
      Pmnt rel.var.   CC
Assign Company Code Workflow Variant for Release for Payment
     Compamy Code     Workflow Var     WF Var. Name
     XXXX     XX01     WS004 Payment release
Define Release Approval Groups for Release for Payment
     0001     Vendor A
     0002     vendor B
     0003     Vendor C
     0004     G/L accounts
Define Release Approval Paths for Release for Payment
     0001     Vendor high
     0002     Vendor middle
     0003     Vendor low
     0004     G/L accounts
     0005     Other
Assign Release Approval Paths for Release for Payment
     Workflow Variant      Doc. Type      Release Group     Approval Path
     XX01     KR     0001     0001
     XX01     KR     0002     0002
     XX01     KR     0003     0003
     XX01     KZ     0001     0001
     XX01     KZ     0002     0002
     XX01     KZ     0003     0003
     XX01     SA     0001     0001
     XX01     SA     0002     0002
     XX01     SA     0003     0003
Assign Release Approval Procedure for Release for Payment
     Wrkf      ApPath     Amt To            Curr     Rel levels     Swf Amt rel     Swf pnmt rel
     XX01     0001     5,000.00      INR     1     WS10000052     WS00400011
     XX01     0001     10,000.00     INR     2     WS10000053     WS00400021
Define Relevant Document Types for Release for Payment
     Workflow Variant     Type
     XX01                       KR
     XX01                       KZ
     XX01                     SA
Define Users with Authorization to Payment Release
     XX01     1     1     5,000.00     INR
     Assigned Authorization Object
     Production manager
     XX01     1     2     10,000.00     INR
     Assigned Authorization Object
     Comp Admin
Carry Out Function Enhancements for Release for Payment
Define Payment Block Reason for Payment Release
           Free for payment
     *     Skip account
     A     Locked for payment
     B     Blocked for payment
     I     CML:InvestorContract
     N     Postprocess inc.pmnt
     P     Payment request
     R     Invoice verification
     V     Payment clearing
We are using Tcode FV60 for Park Vendor invoice
We are trying to post the Document thru Tcode FBV0 , But the Post field is grey and system shows error: func not possible as document is in not released. The Workflow is not getting triggered. And hence its not possible to release the doc.
The workflows have been activcated
We have done Eventlinkage and activated it.

In future when you post question please do some formatting. It seems like a novel.
Have you checked in SWEL whether the event CREATED of Business Object BSEG getting triggered. I hope you have activated the linkage between event and workflow from PFTC or SWE2 transaction code.
Thanks
Arghadip

Proxy messgs on ECC in scheduled status - released for processing (PI 7.1)

Hi guys,
I have set up a scenario (ABAP Proxy(ECC)->(using WS adapter)PI7.1->SOAP) and the outbound messages on the ECC remain in the scheduled status (green flag) saying "Released for processing (WS)". Why? Must there be some processing be executed? Manual? Or job?
Any help on this appreciated, Olian

Hi Olian
Try applying the solution in the SAP note #1129614 SP2: WSRM sequences process only the first 3 messages.
Regards
Mark

Photoshop Elements 9.0.2 patch released for MAC users

A patch has been released for Photoshop Elements 9 to fix some import from iPhoto issues.
The patch can be downloaded from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4918 link.
One should be able to import media from iPhoto'011 after the patch has been applied. The application hang issue should also not come while importing a large iPhoto'09 catalog into Organizer.
The patch can also be applied from Adobe Application Manager via Help>Updates.
The patch has also fixed an issue for MAC Leopard. More details about this issue can be read through @ http://kb2.adobe.com/cps/885/cpsid_88567.html.
Thanks,
~V

List of major issues resolved in this update.
1. 2299340 : Commands drop down in the designers do not work and numbering building blocks
in Para designer do not get populated if FM is launched afresh and the designers are present in
the workspace.
2. 2307931 : FrameMaker crashes on inserting any file of a type other than the type defined for
the column in a reltable.
3. 2300993 : FrameMaker crashes while opening a file with view->options set as "Facing Pages"

Re: GeoRaptor 3.2.1 Released for SQL Developer 3.x

Hey,
Referencing this that was posted in early September 2012:
GeoRaptor 3.2.1 Released for SQL Developer 3.x
I am supporting GRE's and the like at UC Berkeley and I really want to hook them up with this plug because it will make their life MUCH easier. But I have some pretty basic problems:
1. A VERY simply table that has an 8307 linestring. The query that GR defaults when the table is added :
SELECT rowid,"ID","NETWORK_ID","BEG_NODE_ID","END_NODE_ID","LENGTH","SPEED_LIMIT","DETAIL_LEVEL",
"IN_SYNCH","CREATED","MODIFIED","CREATED_BY","MODIFIED_BY","MODSTAMP","NET_GEN_ID",t.GEOM as GEOM
FROM VIA.LINKS_HOLD t
WHERE SDO_FILTER(t.GEOM,?,?) = 'TRUE'This seems to do something but nothing is ever displayed. The table definition is as follows:
CREATE TABLE LINKS_HOLD (
ID NUMBER,
NETWORK_ID NUMBER,
BEG_NODE_ID NUMBER,
END_NODE_ID NUMBER,
GEOM MDSYS.SDO_GEOMETRY ,
LENGTH NUMBER(9,3),
SPEED_LIMIT NUMBER(3,0),
DETAIL_LEVEL NUMBER(3,0),
IN_SYNCH NUMBER(1,0),
CREATED DATE,
MODIFIED DATE,
CREATED_BY VARCHAR2(30 BYTE),
MODIFIED_BY VARCHAR2(30 BYTE),
MODSTAMP TIMESTAMP (6),
NET_GEN_ID NUMBER
)And some sample data. I am only including the geometry
GEOM(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SDO_ORDINATES)
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(-118.18477, 34.02929, -118.18156, 34.02932))
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(-118.18268, 34.02393, -118.18269, 34.02631))
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(-118.18269, 34.02631, -118.18268, 34.02393))
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(-118.18257, 34.02731, -118.18387, 34.0273))
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(-118.18387, 34.0273, -118.18257, 34.02731))
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(-118.18256, 34.02631, -118.18269, 34.02631))
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(-118.18269, 34.02631, -118.18256, 34.02631))
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(-118.18131, 34.02632, -118.18256, 34.02631))
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(-118.18256, 34.02631, -118.18131, 34.02632))
SDO_GEOMETRY(2002, 8307, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(-118.18257, 34.02731, -118.18256, 34.02631))Since the query I tried to substitute for the system generated one was:
select geom from links_hold ;When I tried to run that the system responded with and error and pasted the following into the clipboard:
SELECT rowid, GEOM as GEOM FROM (
select
rowid,geom
from
via.links_hold
? MDSYS.SDO_GEOMETRY(2003,8307,NULL,MDSYS.SDO_ELEM_INFO_ARRAY(1,1003,3),MDSYS.SDO_ORDINATE_ARRAY(-180.0,-165.78279266572636, 180.0,165.78279266572636))
? Please keep in mind that very same query will display all the links where I run in the generic map view (GMV) of SQLD and
since GMV has little in the way of additional features it is rather frustrating to see your tool not really working, or what
is more likely is that I have a lack of understanding because I cannot find documentation that will allow me to
move forward w/o bugging you.
So Any light you can throw on this would be of great assistance. Thanks much!

Flying Guy,
The non-display is a major bug that was discovered after GeoRaptor 3.2 was released. I knew it was there a few days after
the release - it got past our testers as well. I hoped to have a release out very soon after but a bunch of things conspired to
stop this from happening. Anyway, no one complained so I figured no one was using it enough to find the bug.
The bug is fixed which you can test if you download the Early Access release from our SourceForge website.
There are some other new functions in this EA that you might discover. The main one being the ability to have a feature count
(those drawn within the map window) displayed on the view / layer tree. See GeoRaptor preferences. Another is the restoration
of right mouse click menus on the sdo_geometry columns of table/mv/view connection nodes. Also, if a table has more than one
sdo_geometry column, the first is no longer selected if you right mouse click/map etc on table node. It will display a pick list
of sdo_geometry columns for you to chose from. (There has also been a major revamp of connection management as I noted
problems since SQL Developer 3.2.)
Please download and try it. Consider joining the GeoRaptor lists to help with testing and documenting. If you find bugs in
the EA please email the right georaptor list, or use the GeoRaptor SourceForge site to register the bug. Or email me
directly simon at spatialdbadvisor dot come.
I hope to have a release ready by the end of the week but I have not heard back from the small group of testers
that we have something that is ready to go.
Wrt documentation we have added some where users have created some for me with my input. Please volunteer to
create documentation.
The simple fact of life is that:
1. GeoRaptor is downloaded by lots and lots of people (a good thing).
But:
<complain>
2. Very few responses ever occur to postings made about GeoRaptor on this forum or on our sourceforge forum: disheartening;
3. Very few bug reports or enhancement requests ever get created at sourceforge: disheartening;
4. I have become the only developer which is a bad thing. I known of some Java developers who have used GeoRaptor but
most/all expect someone else to fix bugs or develop the tool. I have spend thousands of hours on a tool that I find useful because SQL Developer
is my main Oracle access tool. But I have never, ever heard from more than 10 people over the past 3 years that they too find it useful: disheartening;
5. Attempts to contact downloaders routinely fall on deaf ears or fail: disheartening;
6. Requests for documenters, developers, testers are ignored or fail because we can't contact anyone who downloads GeoRaptor: disheartening.
</complain>
Like a lot of open source projects I do not get paid for anything I do. But what annoys me is that no one - other than a tiny brace of people - will help with anything
even when we ask.
I have also decided that major new functionality added to GeoRaptor eg GeoRasters; WMS; WFS; etc will only be done when sufficient funding, via a fundraising website
makes a set amount. This is something that the PostGIS have started doing and I think it only fair considering how many months each year I spend on development "in
the dark" for no income.
regards
Simon

Blacberry 10.3 release for z30 in Singapore

Similar Messages

Maybe you are looking for