Black and white disaster!!!!!!

everytime i put a picture into black and white then i try to remove the black and white to make a little color show IT DOESNT WORK!!! please help me!!!!

Hi Abigail and welcome to the forum.
I don't know how you are tutning the image to B&W, but if you want to have parts of the image in colour, you need to use a B&W Adjustment layer.
Layer > New Adjusment layer > Black and White
Then use the paint brush with black as the forground colour, and paint over the areas you want to have full colour. You need to make sure that the layer mask is selected in the B&W adjusment layer. You can tell because a) it will have a double outline, and b) if you have it wrong, you'll be paint onto your image.
The technique you are trying to use is called 'Colour Pop'. So you can use that term to search for help if you need a tutorial.

Similar Messages

DVI to Video adapter | Black and white TV display.

- -
Hi,
I just pruchased a DVI to Video adapter and unfortunately, it doesn't work (the display on my TV is black and white).
I use a S-Video cable.
I tried restarting and using other displays.
Thanks,
Chris.
- -

Anyone else has an idea?
The subject has been discussed here: http://discussions.apple.com/thread.jspa?threadID=2136106&start=60&tstart=0 and apparently the problem is fixed with OS 10.6.3.
But I'm using 10.5.8! Thanks.

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

HT3669 I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

Check the printer itself. Some printers you need to set the color & B&W settings on the printer itself instead of the Mac. If that is not the case w/your printer, contact HP tech support and/or post in their forums if they have one.

How can I get my printer to print in color? I can only print black and white

HP Officejet 6500 E710n-z-------windowsxp My printer will not print anything in color. How can Iget my printer to print in color? I can only print in black and white. It is a new Printer and we just installed it 2 wks ago.

I am not sure I understand ''it still will not print. ''
If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

Hoiw do I force my new mf8580cdw to print in black and white only (grey scale)?

First of all I am using windows 7 - 64bit and my printer is the MF8580CDW. I am using the UFRII print driver. I have tried changing one/all of the profiles in the print settings and printer properties to "black and white" printing but the software keeps chainging my selection back to "Auto[Color/B&W]". I have also tried enabling the toner saver option to no avail. When I changed the settings I clicked "Apply". Why is the driver not saving my settings? How do I force the printer to always print in black and white?

Hi,
From the application used to print open the print dialog.
Click Properties / Preferences / Settings to access the Printing Preferences dialog.
Click the Advanced button.
Under Printing Features set the Print in Grayscale value as Black Ink Only.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do i get my hp 3070 to print in black and white only?

I am struggling with changing the print settings on my hp 3070 B611a to print only in black and white. please assist. Thanks

Hi,
From the application used to print open the print dialog.
Click Properties / Preferences / Settings to access the Printing Preferences dialog.
Click the Advanced button.
Under Printing Features set the Print in Grayscale value as Black Ink Only.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Lightroom changes color photos to black and white error

When I import NEF files into LR, they initially display as Colour, then during the render process, LR changes them to black and white. It has never down this in the past, is there a reson why LR is doing this now? The photos are colour (as shown in Capture NX and Windows explorer), and during importing, I selected 'None' for the develop setting. Does anyone know what I am doing wrong? Thank You :-)
Particulars: Lightroom 2, Files: NEF (Nikon D300),OS: Windows XP Pro

Thanks Jao, much appreciated...I must of changed the develop setting...now that I recall, I did go into the Develop->Set Default Settings recently. The reset resolved the issue.
Thank You...CK

Can I print in black and white with an empty color cartridge on a HP Officejet Pro 8100 printer ?

Only the cyan cartridge is empty, all of the other 3 cartridges are fine. I ordered the cyan cartridge online but I need to print important documents today. The power button is blinking when I try to print.
I don't understand, black and white should not use a color cartridge to print.
Is there a trick so I can print before receiving the cyan cartridge ?
This question was solved.
View Solution.

The Officejet Pro 8100 ePrinter has the same print mechanism as its All-in-One counterpart the Officejet Pro 8600. This printer has a printhead mechanism that contains 4 individual cartridges: CMYK (cyan/magenta/yellow/black).
One will have to replace the cartridge, if the unit provides a message of one of the colors being empty, before the unit will resume printing. It is a maintenance mechanism to prevent the product from self-damage. Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

My Imac has black and white vertical lines

Riddle me this Apple...
A few months ago, my 2008 Aluminium 24inch Imac locked up and exhibited space invader style pixels all over the screen.
After rebooting, it was fine for a while and then it would freeze again and I'd get the same Atari style pixels appearing, and everything would be frozen.
Then, most reboots after that, I would get vertical lines in groups of three, alternating black and white squares as in the photo.
I called Apple here in South Australia, and they said "it's your graphics card, and it will cost $400 to fix and we need it for a week".
Not wanting to do that, I bought a $15 firewire cable, booted the Imac in T mode and used my PC laptop running macdrivepro to save all my files onto a 500gig backup drive, and then proceeded to fix the corrupted kext files and most importantly delete the recent flash player update which I believe was causing the problem.
Booted her back up, and she ran perfectly. For a few weeks, until it started again.
So I re-installed the Leopard operating system from the original disks, and that fixed it. $15 is better than $400.
Now, a few months have passed, and the problem had come back again, now that I have added more stuff on my computer.
This time however, I chose to wipe the drive completely and do a fresh install of Leopard, and then upgrade to Snow Leopard.
The problem is that it won't boot from the CD drive anymore, won't boot from a thumb drive, won't boot in any mode except T mode, but then it has these lines on the screen again and eventually I get the kernel panic happenning and it wants to be shut down.
Every time I start the computer, these lines IMMEDIATELY appear. I've tried resetting the Pram, tried changing memory and have now resorted to surgery.
I've taken apart the Imac, yes I hear you Apple...you guys thought that we mortals wouldn't delve into the depths of your finely machined systems, however, some of us do own micro torx head tools to remove those pesky screws, and yes, a razor blade does lift up the magnetically attached screen glass without having to use suction pads.
So once inside the temple of doom, I removed the hard drive, and dropped it into a hard drive dock.
After days of messing around with it via four other MAC computers, running Tiger, Leopard and Lion, we have still not been able to install an operating system back onto this drive.
Does anyone have any insight into what these lines actually are? Every one I speak to says a different thing...
"It's the graphics card", "It's the hard drive", "It's the cable that connects the LCD screen", "It's the motherboard", It's the screen itself", "It's a corrupted bios" etc etc..
But if it's any of those things...then why did it run perfectly after I fixed it the first time?
Any and all help is greatly appreciated.

Hi BDAqua,
I appreciate you taking the time to reply, and for the suggestions.
My spider sense was tingling, as were my eager fingers to login and read your reply, in fact I was almost salivating at the thought of crushing those Apple reps with a swift blow from one of my megalithic old 4gig internal drives, or better still, perhaps shooting my old DX266 sporting a massive 256k HD and 4mb of ram, fully loaded with Encarta and Windows 3.11 out of a cannon and straight into Steve Jobs bedroom window, with a note saying..."How'd ya like them apples..".
But alas, my Aquatic friend, I am in need of a functioning operating system to be able to do any of those magical tricks you suggested (insert frown face here)..and yes, when I finally opened up the Imac and peered inside, a moment not unlike Indiana Jones peering down into the depths of the Well of Souls, I suddenly realised that an Imac might look impervious to heat vision and thermonuclear devices on the outside, but inside they can still gather as much dust as my infinately useless ZIP drive that I bought back in the late 90's, thinking it was the best thing since the invention of microsoft paint...awesome program by the way guys..
Getting back to the problem at hand, the issue really is that I have, perhaps stupedly, reformatted the 500gig WD drive via a hard drive dock, which is really a lot like one of those early 1950's cassette drives you find in vintage cars..
And upon returning the drive to the Imac and re-assembling it WITH REAL SCREWS, not titanium-alloy fingerprint encoded ones like you would expect to find in Iron Man's suit, I could only boot the poor thing into T mode. No other modes were available, and believe me, I tried all of the alphabet...even the "C" button, which if you ever watched an episode of Knight Rider called Knight of the Juggernaught, did not turn my computer into a convertable..
By now you're probably sensing that the irony of all of this is that I am typing this message on my Windows 7 upgraded HP laptop, which sounds not unlike a jumbo jet taking off at times, the fans are so loud, and among other things, it keeps telling me it is not genuine, even though I paid good money for a proper copy to free me from the painful experience which was Vista, and so in a sense, microsoft is playing a small part in the desperate rescue of it's far superior, yet broken down and busted arch enemy...I bet somewhere in it's RAM, it is smiling in little ones and zeroes, while it hides behind a free copy of AVAST, hoping one of a billion nasty viruses don't come knocking on the kernel door..
The next round of drinks goes to the man, woman, child or droid that has any other suggestions that could allow me to participate in some of the ideas put forward by our very knowledgable watery friend..as alas, I do not have any of those options available to me.
Today's assignment is.. how do we install an operating system on a formatted external drive. Sounds easy doesn't it...I've read many articles, but in practice it's proved as elusive as Bigfoot.
I just cannot make this hard drive understand that there is no spoon...
EdStraker

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I have trouble reading in Black and White. changing the background color for all

I have trouble reading in Black and White. On my PC I can change the background color (and I am not just talking about for a word or pages document) but for eveything so anything that was a white background I can put in what ever color I like but it still prints in Black and white.. I can't see how to do this on the Macbook air. on my PC I do this in display. Sort of putting colored film over the screen I dont know what to do. Can anyone help?

Hello Floridamacbookpro,
You may be interested in the 'invert colors' Accessibility feature. This can be invoked by pressing the Control, Option, Command, and 8 keys on your keyboard. This only affects your display, and does not have any affect on printed items.
Mac OS X displays inverted image colors (white on black, reverse type)
http://support.apple.com/kb/HT3488
Cheers,
Allen

How to record video in black and white mode

Hi,
I am developing a live video recording application and my application have black and white mode recording feature, So please give me some idea about black and white recording.
Thanks
Ram

Your 1200 is fine it will print in B&W using these settings:
in the print driver drop down box, select Color Options and tick the print in Greyscale option
then click in the Presets dropdown and select save as and type in a description such as " Black and White"

Critical Irish Update needed to solve black and white tv problem on G20!

I recently had trouble with setting up tv on my Qosmio G20, I was pointed in the direction of a black and white problem that affects earlier models. The solution to the problem was to use the g20's drivers and run 2 reg files.
Having done that to no success i tried every irish combination possible, with still black and white, I then tried UK and got colour.
I mucked about with the registration files and found that in the file, there was no irish setting, So when a user puts ireland in as their location they will always get black and white.
Ireland uses the exact same settings for tv as the UK does, However if a person choses UK they will not get irish guides or irish channels to pick from (ireland isnt part of the uk)
i found the settings for the UK -
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\ttv200x\Parameters\44]
@="United Kingdom"
"FreqBoundary"=dword:000493e0
"LB_VideoStandard"=dword:20000080
"LB_AudioStandard"=dword:00020000
"LB_ShiftFreq"=dword:00000abe
"HB_VideoStandard"=dword:20000080
"HB_AudioStandard"=dword:00020000
"HB_ShiftFreq"=dword:00000abe
Figuring the 44, was the dial code for UK (that took a while to figure) i added a registry entry with exactly the same settings, but with ireland and 353 at the top.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\ttv200x\Parameters\353]
@="Ireland"
"FreqBoundary"=dword:000493e0
"LB_VideoStandard"=dword:20000080
"LB_AudioStandard"=dword:00020000
"LB_ShiftFreq"=dword:00000abe
"HB_VideoStandard"=dword:20000080
"HB_AudioStandard"=dword:00020000
"HB_ShiftFreq"=dword:00000abe
I now have colour tv under the irish settings in media centre, i also have sound now, where before i didnt. Hopefully the above code will be added to the registry file named ttv2_regdata_20050111.reg that comes as part of the http://support.toshiba-tro.de/kb0/TSB5800V20000R01.htm driver fix for the problem..
thanks to jimi in the following post http://forums.computers.toshiba-europe.com/forums/thread.jspa?forumID=42&threadID=11145 for pointing me in the right direction.
Hope it helps someone..
laters taters...

I can confirm the problem isnt to do with win dvd creator 2 for toshiba. My registry setting was at 0.
Its bascially a known problem that was fixed, however it wasnt fixed for irish people.
When windows wants to play tv it looks in the registry to find out what settings to use. There are no irish ones. Our signal is technically the same as the UK, so using UK settings fixes the problem, However the UK guide doesnt work for irish channels. For the tv to work in colour windows needs the 353 settings.
I think the guy on this thread was having the exact same problem that is fixed with the registry entry.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2488&tstart=75
This problem will only affect a small amount of users, The fix that comes with the toshiba drivers needs the irish settings added, Then the problem will be solved by updating the drivers.
until then any irish people can fix their black and white tv signal by adding the above registry entrys.
for trouble shooting purposes here is a list of countries where the bug is fixed... If someone complains of black and white tv on the qosmio series, this list can be checked, and if the persons country is absent, it could be the problem. To fix the problem you need to find out their country call code (+353 is ireland, +44 is UK) You also need to know the settings to add, i did this by looking at the UK settings in the file ttv2_regdata_20050111.reg that comes in the "reg" folder that comes for the qosmio tv driver.
here is the list of countries that an update of driver will work for...
"United States"
"Japan"
"Australia"
"Newzealand"
"China"
"Korean"
"United Kingdom"
"German"
"Italia"
"Swiss"
"Netherlands"
"Belguim"
"Luxemburg"
"Spain"
"Portugal"
"Russia"
"Ukraine"
"Azerbaijahn"
"Kazakhstan"
"Saudi Arabia"
"UAE"
"Lebanon"
"Kuwait"
"Egypt"
"Bahrain"
"Qatar"
"Jordan"
"Oman"
"Norway"
"Sweden"
"Denmark"
"Finland"
"Turkey"
"Greece"
"Israel"
"Cyprus"
"Poland"
"Slovakia"
"Czech Republic"
"Hungary"
"South Africa"
"Senegal"
"Mali"
"Kenya"
"Tanzania"
"Romania"
"Slovania"
"Bulgaria"
"Estonia"
"Lithuania"
"Latvia"
"Malta"
"Yugoslavia(Selvia Monteneglo?)"
"Singapore"
"Hong Kong"
"Taiwan"
"Malaysia"
"Thailand"
"India"
"Philippine"
"Indonesia"
hope that helps.

Video out black and white?

ok i just got the apple cables for the ipod..
when i plug it in the tv it shows it in black and white?
i use the video plugs red to red white to white and green to yellow thats the only one that works for video..
is it the cable or the video from my i ipod touch?
thanks

So your TV only has three plugs and you tried to plug in the rest of the video. See if your TV has more plugs like three videos and two audios. What you tried to do is plug a component cable into a composite jack which doesn't work. I think you bought the wrong cables. You need the composite. The ones you have is for an HDTV

Black and white disaster!!!!!!

Similar Messages

Maybe you are looking for