Black and White monitor adaptor for connection to a G3 Blue and White?

Hi, I have a Blue and White G3 Power mac and I also have a black and white G4 with a matching flat screen. Is there an adaptor available which allows me to connect my blue and white G3 to my black and white screen?

If I make every assumption possible, I think you may be asking if you can use a white-with-gray Apple 17" flat panel display, which has only a digital video connector, in a stock Blue & White G3.
There are two issues:
1) The connector on the stock card does not mate with the connector on the display, and there is no cheap fix available.
2) the display gets its power off the connector, and the Blue & White does not have a way or providing that power.
Both can be solved together by using the Dr. Bott VGA-tor. But at US$300, it would be cheaper to buy a new display.
http://www.drbott.com/prod/db.lasso?code=0151-VGAT
The second approach requires two steps. First, upgrade your Video card to one that provides the Apple DVI connector. The use the Dr. Bott DVI-ator (US$95) to supply the external power:
http://www.drbott.com/prod/db.lasso?code=0111-DVAD

Similar Messages

I have bought a Belkin composite cable from the apple store but the picture is black and white? The tv connection does require the red yellow white cables and that is the one I bought

I have bought a Belkin composite cable from the apple store but the picture is black and white? The tv connection does require the red yellow white cables and that is the one I bought? Can any one help

You have the iPhone in your profile, but people's profiles here are often incomplete or very outdated. It's better to be specific. And part of the problem is that I can't find any Belkin composite cables for connecting an iPhone to a TV, either on the Apple Store or the Belkin site. The closest I found is this Belkin video cable, which doesn't specify exactly what kind of connection it is.
For the most relevant assistance, you've got to post in the iPhone forum and specify the cable by providing a link to exactly which cable you're using.

I had put apple tv to update and later noticed that it is requesting for connecting the micro USB plus the white light blinking

I had put apple tv to update and later noticed that it is requesting for connecting the micro USB plus the white light blinking

Yeah.
#FAIL #FAIL #FAIL
Since our preemie woke me at 04:00 this morning and I had nothing better to do--I let the ATV3 connected to our "main viewer" 'update'.
Got a screen showing what at first bleery-eyed glance looks like a HDMI-to-iPod/iPhone/Ipad cable wanting iTunes.
Fast blinking white indicator light.
Pretty much BRICKED.
I shall attempt the USB-mircoUSB after another cup of coffee.
Really GLAD I did not update the two ATV2s.
UPSIDE: discovered that one can make the same content play on ALL ATVs simultaneously from iTunes on the main machine...

Log connection attempts and source IP address for connections that fail/timeout on RADIUS

How can I log the connection attempts and source IP address for connections that fail RADIUS authentication? I'm using RD Gateway on 2012 R2 in conjunction with Azure Multi-Factor Authentication Server on another 2012 R2 server. When a user fails
multifactor authentication or the authentication times out, all I get is Security event 6273 on the RD Gateway that the radius server did not process the request, and only the radius server's IP is logged. There's nothing logged in TerminalServices-Gateway\Operational
because the TS Gateway hasn't yet processed the connection attempt (all auditing options for RD Gateway are enabled). The MFA/Radius Server is only logging the connection from the TSGateway - it doesn't know the original client's IP address.
I'm looking for the equivalent of an IIS log - somewhere the RD Gateway should log the initial HTTPS connection attempt and the source IP address of the client. I need to be able to track down potentially fraudulent login attempts.

Hi,
Thank you for your posting in Windows Server Forum.
This error might be caused by one of the following conditions:
• The user does not have valid credentials
• The connection method is not allowed by network policy
• The network access server is under attack
• NPS does not have access to the user account database on the domain controller
• NPS log files or the SQL Server database are not available
To perform these procedures, you must be a member of Domain Admins.
Please check for more information:
Event ID 6273 — NPS Authentication Status
http://technet.microsoft.com/en-us/library/cc735399(v=ws.10).aspx
Hope it helps!
Thanks.
Dharmesh Solanki

HT4587 My airport express and wireless airplay speaker are connected to wife, but airplay and homesharing are not working...what to do?

My airport express and wireless airplay speaker are connected to WIFI, but airplay and homesharing are not working...what to do? Everything was working fine until about two weeks ago, all of the sudden airplay has disappeared from the iphone, itunes on the laptop, and the apple remote for iphone. I have restarted the router many times, re-setup the airplay speaker and the airport express and booth are showing as being properly connected to the router when I log into the router IP address. I was on the phone with Apple support for 30 minutes they blames verizon, got on the phone with verizon and they stated the settings were all correct and compatible with apple, got back on the phone with apple and they again are blaming verizon and trying to get me to get an airport extreme because that would fix the problem...any suggestions, please!

There are three Airport resets, soft, hard and factory default. It would probably be beneficial if you tried each one in sequence. Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

I downloaded IOS 6 and using the apps movies , books and I-store I get connected to the USA store and not to the Dutch one like before. So i cannot update my purchaged apps. How can I change this ?

I downloaded IOS 6 and using the apps movies , books and I-store I get connected to the USA store and not to the Dutch one like before. So i cannot update my purchaged apps. How can I change this ?

Have you looked on all the pages of your iPod? Have you looked in all your folders? Have you you tried finding the apps using the iPod's search page.
PS: Offering points in advance is a violation of there terms of service for this forum. Perhaps it's why you have not received any other answers so far,

Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94816)

Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

Hi,
Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign 2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
IP for communicating with the CAS server which is in a different domain.?
Details:
1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
Thanks
Rajesh Vasudevan

First, it's not possible. You cannot attach a primary site to an existing CAS.
Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
no functional differences but does add complexity, latency, and additional failure points.
Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
for trouble IMO.
Jason | http://blog.configmgrftw.com | @jasonsandys

HT1551 after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

To dear apple FaceTime users I'm having troubles logging on to FaceTime I typed in my correct details and its saying check network connection. I did that and every things fine. Any ideas?

To dear apple FaceTime users
I'm having troubles logging on to FaceTime I typed in my correct details and its saying check network connection. I did that and every things fine. Any ideas?

Hello...i'm new to forums....was there ever a solution to this problem please?

Can someone point me in the right direction for a second monitor adaptor for my iMac?

I'm trying to add a second monitor to my Late 2006 20 inch iMac (yes it still works just fine and I can't afford to upgrade yet). I'm having a hard time finding the right adaptor for the monitor, I've bought the wrong thing twice now (the second one I got looks like its just for Power PC, it won't go in here but it fits in my iBook G4 just fine)
I've been searching but everything I find is either for newer or older models then mine Does someone might know of a place where I could find one that will fit my machine? Thank you!

The late-2006 iMac has a mini-DVI port, so you'll just need a mini-DVI to the appropriate input for your monitor. The adapter you have for your iBook will not work. You can get adapters from the Apple Store as well as many other vendors.
Regars.

Develop software for connecting to creative zen touch and other devices not recognized by wind

hi there,
as a programmer i wonder, is it possible to obtain information of how to connect to usb-connected creative device (which is not recognized automatically by windows, as the zen touch) and how to communicate with it's is there any documentation about that available to "non-creative" ;-) developers?
the idea is to create a plugin (e.g. for musikcube) that enables the programm to access the files on the device.
i know there are third party companies that do provide software for connecting to e.g. zen touch, but i do not think that they have figured out every little bit by themselves, have they?
greetings and thanks a lot
asdf

Try this:
Download <a href='http://www.delldjsite.com/forums/attachment.php?attachmentid=444' target=_blank>this[/url] file. Extract it to whatever folder you like. Inside that folder run the file fixup.cmd. A DOS window will open up and start display messages on what its doing, when its done it will instruct you to remove the device from Device Manager and reconnect it.
Try this and see if it works.

How do I get my Motorola S10 HD headset/Bluetooth to pair and become "discoverable". It connects but continues to search and drains my battery.

I keep getting it to connect but the phone contines to search and drains battery.

Had same problem and solved it.
Speculation: It appears that the S10-HD can only remember one device at a time. So, every time you want to connect it to a new device, you have to erase the headset's memory of other devices.
Solution:
Turn off the Bluetooth on all devices except the device you want to pair the headset with. Then, with the headset turned on press the + and O buttons, (those are the volume-up and power button respectively), and hold until the LED is at a constant blue, (not a flashing blue, etc). I found this is more easily done if you press the + button first, just as you would hold shift down first before typing a capital letter, (otherwise you may accidently turn off the headset). This erases the headset's memory of previous devices and puts it into discovery mode. It will show up as "motorola" when you search for a discoverable headset through the Bluetooth preferences wizard.
Note: The headset will then forget your iPhone. So if you want to connect it up with your iPhone again, you will have to go into the Bluetooth settings on your iPhone, select "forget device", and then pair again using the + - O trick again.

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking and Hyper-V.

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking!
http://www.youtube.com/watch?v=8mOuoIWzmdE
Hi thanks for reading. Now I may well have my terminology incorrect here so I will try to explain as best I can and apologies from the start.
It’s a bit of both Hyper-v and Server 2012R2.
I am setting up a lab with Server 2012 R2. I have several physical network cards that I have teamed called “HostSwitchTeam” from those I have made several Virtual Network Adaptors such as below
examples.
New-VMSwitch "MgmtSwitch" -MinimumBandwidthMode weight -NetAdaptername "HostSwitchTeam" -AllowManagement $false
Add-VMNetworkAdapter -ManagementOS -Name "Vswitch" -SwitchName "MgmtSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "MgmtSwitch"
When I install Hyper-V and it comes to adding a virtual switch during installation it only shows the individual physical network cards and the
HostSwitchTeam for selection. When installed it shows the Microsoft Network Multiplexor Driver as the only option.
Is this correct or how does one use the Vswitch made above and incorporate into the Hyper-V so a weight can be put against it.
Still trying to get my head around Vswitches,VMNetworkadapters etc so somewhat confused as to the way forward at this time so I may have missed the plot altogether!
Any help would be much appreciated.
Paul
Paul Edwards

Hi P.J.E,
>>I have teams so a bit confused as to the adapter bindings and if the teams need to be added or just the vEthernet Nics?.
Nic 1,2
HostVMSwitchTeam
Nic 3,4,5
HostMgmtSwitchTeam
>>The adapter Binding settings are:
HostMgmtSwitchTeam
V-Curric
Nic 3
Nic 4
Nic 5
V-Livemigration
HostVMSwitch
Nic 1
Nic 2
V-iSCSI
V-HeartBeat
Based on my understanding of the description , "HostMgmtSwitchTeam and
HostVMSwitch " are teamed NIC .
You can think of them as two physical NICs (do not use NIC 1,2,3,4,5 any more , there are just two NICs "HostMgmtSwitchTeam and
HostVMSwitch").
V-Curric,
V-Livemigration , V-iSCSI ,
V-HeartBeat are just VNICs of host (you can change their name then check if the virtual switch name will be changed )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What can I do about paying for Office from a commercial store, and itunes charging $100 for smart converter, ms office package and pack for ms office $41.99? It surely looks like double dipping

Hi folks, I am puzzled when looking at my itunes account. I bought a store office 365 package for $100, and in the process of installing it, somehow ended up with fees for smart converter, ms office package and pack for ms office, totalling another $90 from itunes. Isn't this double dipping and if so, how do I go about a refund? Thanks jby

Well, MS Office 2004 is available for the Mac and being a user of both the Windows and Mac versions, I think that the Mac version has a slight edge. The only downside is that it does not come with MS Access so if you use that then you have to stay with the PC version.
But... if you are set on mainly using Windows then paying a substantial premium just for a computer that looks good rather than on the fact that it runs OSX and hence great packages such as iLife etc is probably a waste. This is especially true when you have to remember that Apple will not give any technical support to users running Windows.. nil, nada, nowt! Likewise, Microshaft (sorry Microsoft) also seem unwilling to give support at this time since (for some strange reason) they don't like the idea of Windows on a Mac.
As I see it, the main reason for Apple to release the ability to run Windows was to:
a> Produce an 'official' version rather than have an unauthorised version 'in the field' which if problematic, could give Apple a bad name.
b> Give people who would like to have a Mac but have the occassional program which has to be run under Windows, the ability to switch to a Mac.
Option b was the reason why I switched from years on a PC to the Mac.

Black and White monitor adaptor for connection to a G3 Blue and White?

Similar Messages

Maybe you are looking for