Black and White RAW Files

I have shot some of the Portrait pictures in Monochorme/B&W - NEF Files. When I import into Lightroom 5.3 they are showing B&W. But when I click on them they are turning into Color.
Is there any option to show them as B&W and generate the JPEG file during Export as B&W Files.
If so please let me know the steps in LR.

You're in the Mobile Forms forum here not Lightroom, you might want to try asking your questions here Photoshop Lightroom

Similar Messages

How to set default to convert a document to a black and white pdf file?

I have dozens of color Word files that I need to convert to black and white pdf files on a weekly cycle. I figured out that I can do this for individual files by clicking "print", "properties", then choose the "paper/quality" tab, and then click on "black and white". However, I cannot make the "black and white" selection permanent. That is, the next file requires me to go through the same four-step process to convert a Word file to a black and white pdf file. Any suggestions on how to make the "black and white" selection permenant?

Sorry. I forgot to mention that I am using Acrobat Adobe Pro 9.4.2.

Iphoto doesn't recognize black and white jpg files

I scanned in an old black and white photo and it is a jpg file. When I try to drag it into iphoto it doesn't recognize the file. I tried changing the file by going to soft proof with profile, checking RGB, saving it and re-importing it but no luck. When I reopen the file, I noticed that my settings never saved in preview. How do I permanently change this files settings?

a common problem is that you don't have permission to upload those files, but it is an easy fix
1) Finder
2) Users(it should have the account name on it)
3) pictures
4) right click on iphoto library then click info
5 on the bottom of the new window there should be a sharing and permissions tab
6) make sure you have permission to read & write
The only other problem I can think is that you are having problems with hard drive space. if so you might want to clean up your hard drive to free up some space. please let me know if that worked for you.

Black and white raw conversions

The raw converter in LR is good-I tend to reduce the saturation and use the luminance sliders. However,more variations in colour need to be catered for so that subtle differences in the grayscale shades of all the various hues (such as greens and blues) are brought out in monochrome.Currently, a conversion of, say,a woodland scene is very blocky in grayscale compared with the film equivalent.

There are a number of plugins which simulate film which are quite good. However, the fundamental issue is that the raw converter does not translate subtle tones very well ( this might also be true of a camera sensor). I use the term "blocky" because there is often a lack of tonal separation in the gray tones in such images.For example moving the green slider on a delicately shot woodland scene darkens or lightens across the board.It would be better if sliders allowed for altering ranges of hues of colours that would show up more clearly the tonal separation.
It would also be good if the image in the develop module could be overlaid with a grayscale zone map and then perhaps it might be possible to directly shift areas of zones to different zones directly with the adjustment brush.

Hi! i took black and white pictures in RAW, but in Lightroom i see these only in color. what to do? thank you

hi! i took black and white pictures in RAW, but in Lightroom i see these only in color. what to do? thank you

You may want to read this I imported a mix of color and black and white raw files but lightroom changed all the black and white file to color?
The Black and white you see is just the cameras representation of the "raw" pixel information straight from the sensor. The RAW file format has yet to undergo demosaicing, and so it contains just one red, green, or blue value at each pixel location.
Lightroom, or any other RAW processor, doesn't recognize the in-camera processing because it is unique to the camera.

Raw Black and White (CR2 Cannon) process in color

I'm shooting black and white in raw/cr2 mode, and when I process them through Bridge / CS2, etc., they always come up color, not b&w. The same occurs with Picasa and other raw processing packages. Any ideas how to keep them B&W, rather than converting to it after processing?
thx!!

By its very nature RAW images are color because color is captured by the
sensor and raw is simply the raw data captured by the sensor. If you want
black and white from the camera then you would have to shoot JPG or TIFF if
your camera offers TIFF. Now the black and white marker should be included
in the RAW file so if your use the software that came with your camera then
it is very likely that software would see that marker indicating that you
had black and white turned on and simply convert the color RAW to black and
white and show you that. You might think that you are getting a black and
white RAW file but you aren't it is just the camera makers software seeing a
simple flag and then doing the black and white conversion. Since these flags
are generally proprietary Adobe doesn't read them.
In the end you are better off doing the conversion to black and white
yourself. There are many ways of doing it even in Adobe Camera RAW and you
will always get better results.
Robert

Converting a Color Cad file into a Black and White .pdf

My company recently bought me Adobe Acrobat XI-Professional as an upgrade from Adobe Acrobat 9-Standard. As such, one of the tasks assigned to me was to take color CAD drawings (.DWG extension) created in AutoCAD 12 and then convert them into black-and-white .pdf files. I recognize that there is a "Print in grayscale (black and white) option, but I'm finding that all of the text used in the CAD drawing (generally yellow and cyan) is coming out in grey rather than black against white. I need all of the colors to generally be black.
Is there a solution that I'm overlooking?
Thanks in advance!

Hi TTownWriter,
On conversion Yellow, cyan and red etc convert as grey instead of Black.
This is an expected behavior.
Regards,
Rave

Elements 7 tint black and white action in photo effects palette

I have somehow deleted my tint black and white photo effects atn file. Can someone with PSE 7 copy their tint black and white.atn file and send to me. I have the png and thumbnail files, but would like to get the .atn file without re downloading my software. The action is in the photo effect palatte. Will be very much appreciated. Debbie

If Photoshop manages color, you need to pick the correct profile for the printer/paper. The profile will be called something like e.g. <printer name> Epson Premium Glossy, if that's the paper you're using.

When I open CR2 RAW files from Powershot G10 they are in black and white. How do I get colour

I'm using Elements 13 on a PC running Windows 8.1. Each time I open a CR2 RAW file from a Canon Powershot G10 it displays in black and white. The image transferred to Elements is still in black and white. Why can I not see the image in colour?

Try holding down your Alt or Option key. The Cancel button in the Raw dialog will change to Reset.
Click on that Reset, and hopefully it goes back to defaults.
Gene

Imported RAW files convert to black and white

I have LightRoom 1.4.1 as well as LightRoom beta installed.
Intel iMac 20, OS 10.5.2
Camera is Canon 40D.
I imported images from a Compact Flash card into LightRoom beta. They downloaded as they should, but then without my touching mouse or keyboard they, in random order, changed from color images to black and white. I deleted them all, exited the beta, imported the same images into LightRoom 1.4.1. Same thing happened.
I tried the Convert to DNG option, and they all imported as black and white without a preliminary color mode.
There are no develop steps set in the import dialog.
I imported them using the Canon import program, and they remained color images as they should. However, if I located them with the finder, though Preview showed them in color, Open With Lightroom or Photoshop CS3 brought them up as black and white.
I'm stumped.
There were several jpeg files on the same CF; they imported and behaved as they should.
Arthur

So I downloaded all the upgrades and re-installed them; rebooted, murmured incantations, re-imported photos.
Same results--black and white photos, rendering the computer and my software useless for processing.
Then I disconnected the card reader from my powered external USB hub, and plugged it directly into the iMac. All problems disappeared. Everything works as it should. Took a while to figure out, but my problem is solved.
Arthur

Multiple Black and white conversion from raw or jpgs

Hi All
Any help would be appreciated.
I have 300 wedding images taken on raw and jpg. I now want to convert them all to black and white. Any way I can do this without doing it one at a time (whether using raw or jpg files)?
Hope someone has the answer or else I need to fork out £500 for CS4!!
Clive

Hi
Thanks for reply. I am able to open and convert from raw ok, what I don’t know if I can do is process multiple files that have been changed, i.e. to black and white?
I don’t think PE8 will actually do this.
Clive Wilkinson
Assessment Coordinator
Kirklees Warm Zone
Mob: 07885 203466
The information in this internet E-mail is confidential and is intended solely for the addressee. Access, copying or re-use of information in it by anyone else is unauthorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of Yorkshire Energy Services CIC or any of its affiliates. If you are not the intended recipient please contact [email protected]
Yorkshire Energy Services CIC, company number 3995784. Company is registered in England and Wales and has its registered office at: St Georges Quarter,
Unit 9, New North Parade, Huddersfield, HD1 5JP, United Kingdom

Black and white pictures and raw format

I started to use raw format. however, when i shoot pictures in black and white and download them to bridge, they get converted to color pioctures. Does anybody know why and what to do about this?

In addition to this,
Raw is Raw, meaning it captures all the data your sensor was capable of. It creates also a jpeg preview extracted in camera from this Raw file to show at your camera viewer and as thumbnails on your computer.
You need a Raw converter to translate the Raw data to a picture in RGB (demosaicing they call this process).
And every setting you choose in camera for shooting is just added as metadata like all Raw settings in the Raw converter are added as metadata to reflect the changes you have made. If you want you can delete those data and start all over again with the original file because this stays as it was taken when shot, regardless all earlier applied settings.
Bridge uses Adobe Camera Raw for converting (demosaicing) the files and has it own code like others have their way of converting. It is possible that the vendor software delivered with your camera is capable of showing the in camera settings right away but then like Curt already stated it is just a reflection of your settings, the original is still the color image you have shot.
There are lots of ways (and far better then in camera setting) to convert your color image to black and white. Just start a google search for some video tutorials and choose the one you like best for your workflow.

Deskjet 3050 does only print JPG files in color - all other docs are only printed in black and white

Dear All,
I have a problem with my Deskjet 3050 Printer. (USB connected with my laptop).
My printer won't print colored documents in color but only in black and white (except for JPG files (photos) which are printed in color.
Word documents or PDF files (for example) are always printed in black and white - even if these are in color.
Copying colored pages with my printer is no problem.
This works perfectly well. The printer is connected to my PC via USB.
The cartridges (color and black and white) are practically new and original HP cartridges.
Could the problem be related to the printer settings which I might have changed by accident.
Thanks in advance for your advise.
Cheticamp
This question was solved.
View Solution.

Hi Cheticamp,
From the control panrl go to Devices and Printers.
Right click the printer and select Printing Preferences.
Cluck the Advanced button and ensure that Print in Grayscale is set as off and confirm.
From Word click on File > Print and click on Settings.
You will see the dame printing preferences screen.
Press Advanced and ensure the grayscale optio is set as off for Word as well.
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Colored Pictures Turning Black and White in Certain Files (PSE 9.0)

Hey guys, how's it going?
I'll try to keep this breif, but it may take a little while to explain. I've been getting a problem with PSE 9.0 where an image or layer that is in color suddenly turns black and white when I paste it into an open file. It's a lot easier to explain with pictures, so here you go.
Figure 1
Figure 2
(Before anything else is said, I would like to point out the reasoning behind relating a middle-finger, a hammer and sickle, and a pony from My Little Pony: Friendship is Magic into a single image; it's a parody project I'm working on. It's about 30 times weirder out of context, trust me.)
As you can see, the source imagery with "APPA JAK" on it (figure 1) is in full color, but when I pasted it onto the layer with the hammer and sickle, it turned black and white. This has become the same with a few other images I have found, but I couldn't find any reliable way to recreate the problem. The problem is also the same weather I find the pictures from the internet, copy those to my clipboard, and paste them or simply paste them from my computer.
If you need any more information (dxdiag, settings, etc. etc.) feel free to ask, and thanks in advance for helping me!

Just a guess because I don't have the original images to play with, but the hammer and sickle is a grayscale image so images posted into it become grayscale.
Use Image / Mode / RGB Color to change the target image to color before pasting anything into it.
Alternatively, use File / New to create a new image that is full color and paste everything into it.

Flattened png. files only render in black and white

Hi,
I have been working with fireworks on a daily basis for over
a year now, and I have never come across this problem. I think it's
either a setting, or I have some sort of bug. But here's whats
going on: I design websites and so I use lots of .png files
(flattened of course) Recently all of flattened png files are
rendering only in black and white. By that I mean I save them in
color, and then when I save them they turn black and white, and I
can only tell this once I reopen them. Even if I go into the
options section when you are saving a doc, and I can choose the
format, and then underneath that the palette, the palette itself is
somehow always set to grayscale, and so I will change it to web
adaptive which is my usual setting. Has anyone had this problem
before. The only way around it that I have found is by first saving
my project as a jpg, and then going back into fireworks and then
saving it as a flattened png.

When installing the new cartridges, did you get the message "Original HP cartridges have been installed"?
Can you check the ink levels and actually see the been color displayed?
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Black and White RAW Files

Similar Messages

Maybe you are looking for