Black and white, with small amount of color!

K, this is what i want to do. I have my video how I like it but I want to make it all in black and white ( which i know how to do ) then from haveing it in Black and White, I would like to have some part of the picture in color. ( or Colour for americans, ha ha)
So what i was wondering is what is the easiest way of doing this so i'm not spending hours upon hours working at this 3 min. movie!
Thanks for anyone that is going to take the time to reply!

http://www.kenstone.net/fcphomepage/basic_pleasantvillelook.html
-DH

Similar Messages

Black and White With Color Not Working

I am trying to have the background of my image black and white with the person in color. I turned black and white on then tried brushing black and white away from the person. Instead of the full, vibrant color coming back it was a dull color. Instead, I tried turning black and white off then brushing black and white into the background. This time, instead of being pure black and white it was black and white with an obvious hint of color. I have watched plenty of tutorials and know that it is possible to have it be pure black and white in the background with the person in front appearing in full vibrant color. I just don't know what I am doing wrong that either my vibrant color is looking washed out in one method or my black and white isn't pure black and white in the other method. When I first turn black and white on the image does go to pure black and white. Any suggestions?

See what happens after re-booting.
Is "Brush Range" set to "All"?
Try the same adjustments on another Image.
Try the "Color Monochrome" adjustment and see if it works as expected when brushed in/brushed away.
Message was edited by: Kirby Krieger -- added a line.

Can I print in black and white with an empty color cartridge on a HP Officejet Pro 8100 printer ?

Only the cyan cartridge is empty, all of the other 3 cartridges are fine. I ordered the cyan cartridge online but I need to print important documents today. The power button is blinking when I try to print.
I don't understand, black and white should not use a color cartridge to print.
Is there a trick so I can print before receiving the cyan cartridge ?
This question was solved.
View Solution.

The Officejet Pro 8100 ePrinter has the same print mechanism as its All-in-One counterpart the Officejet Pro 8600. This printer has a printhead mechanism that contains 4 individual cartridges: CMYK (cyan/magenta/yellow/black).
One will have to replace the cartridge, if the unit provides a message of one of the colors being empty, before the unit will resume printing. It is a maintenance mechanism to prevent the product from self-damage. Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Black and White with Actionscript

In the website I'm developing I want to turn the background
image to black and white as the cursor moves toward the left side
of the screen or color when the user's cursor moves toward the
right side of the screen. Right now I have two images, color on top
and black and white on the bottom so all I'm doing is affecting the
colored image's alpha to make the black and white fade in.
Can this be done in action script? It would save on file size
because I would just need the colored image if I could turn it to
black and white with actions script. I know you can control the
filters with action script but even in the colorTransform filters I
don't see anything for the saturation.
Any help would be appreciated.
Any help would be appriciated.

Sorry, let me clearify. I have the mouse script and alpha
fading working already but I'm trying to find a different way to
get the same result. Using an alpha fade I need to have 2 images,
one b&w and the other in color. I want to use only one color
image and basically desaturate the image as the user moves their
cursor towards the left of the screen.

How to make a photo half black and white with select colours

Hey,
Can anyone give me step by step instructions on how to make a photo black and white with abit of colour like the one attached... on CS4?
Cheers

Haven't seen you attached file as it takes a long time for attachments to load on this forum. Try little camera icon instead.
EASIEST way to have B&W in areas is to add Hue and Saturation adjustment layer. Use sliders to make B&W. Next paint on layer MASK, with black, to restore color in areas you want to show color.

Hp photosmart 7150 only prints black and white with mac

My hp photosmart 7150 only prints black and white with mac. I have tried installing and uninstalling, installing drivers, but no change.

Hi,
You did not mentioned your Mac OS X version, however I assume you have one of the latest versions.
The Photosmart 7150 is not supported on Mac OS X v10.6, v10.7, v10.8 or v10.9 and therefore it is more than likely that there are no drivers for your OS and the used Generic Driver only provide B&W printing.
Although it is not officially supported you may check 3rd party solutions such as the 3rd party HP-IJS print drivers which list your printer as supported.
Be sure to install any of the 3 required downloads, then click the plus sign under Printers & Scanners, click the Use drop down and click on Select Printer Software.
Search for your printer model form the list and select the driver, I believe that may work:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
Although it only list up to 10.8 (Mountain Lion) it should also work on Mavericks from my experience.
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

What is the name of that thing that appears before a film, in black and white, with numbers counting backwards and with circle motion ?

what is the name of that thing that appears before a film, in black and white, with numbers counting backwards and with circle motion ?

Thanks a lot, not only I got what I needed, but also discovered a great site
thanks
fp

How to colorize parts of a picture in black and white with Aperture?

Hello, I have a question: How to colorize parts of a picture in black and white with Aperture?

Use the Black & White Brick and then brush in or brush out.
You'll find this and several excellent methods listed in the "More Like This" box in the column to the right of these messages. (This comes up regularly -- and while the "More Like This" is a roundabout way to get there, you'll find your answers.)

How come my ipad keeps on going black and white with the lago

hi
i was just on my ipad trying to get music off my ipad to my laptop than a note came up and said do u want to update your ipad i than press update 30 mins later my ipad keep going black and white with the lago
pleases help me or tell me what i can do with this/fix

The update does take time and 30 minutes is not unusual. Is there anything else happening on your screen such as a long bar that fills in very slowly?

Printing black and white with color accent

I am trying to figure out how the make a photo black and white and just have a flower colored.
I have Photoshop 9 and am a beginner. Please help! Thanks.

1. Open your photo in Full Edit.
2. Find the smart brush, the one with the gears on it. Choose a black and white style from the thumbnails in the options bar and turn on the Inverse checkbox.
3. Drag over the flower that you want to keep in color. The rest of the photo will turn black and white.

Taking a photo to black and white with one item left as color.

I am trying to take a picture of my daughter and turn it black and white while leaving the tulips still in color. I cannot figure out how to do this, please help!

Use the Smart Brush tool, and select the "Reverse Effects...Reverse - Black & White" option, with "Inverse" checked.
Ken

Black and White with a Little Color.

I'm interested in making a black and white movie with indivdual isolated
objects in color. For example, the entire room and everything in it is black
and white except a cell phone.
Do I have to shoot in color and then correct in post?
Or do I have to shoot in black and white and then correct in post?
Trey

Here you go:
http://www.kenstone.net/fcphomepage/basic_pleasantvillelook.html
Shane

Playbook screen Black and white with no color or just black with faded white lines

My playbook has been acting up lately and need to know where to send it for repair. The issue is the screen goes blank or black and white (losing color) and after pushing the power button several times the color comes back. After fight that issue several times its gotten to the point the screen is black with very faded white lines on the screen and nothing is working to get it working again. I have tried several times to shut it off and start, but still the same issue.
Thanks,

will do, thanks

Raw Black and White (CR2 Cannon) process in color

I'm shooting black and white in raw/cr2 mode, and when I process them through Bridge / CS2, etc., they always come up color, not b&w. The same occurs with Picasa and other raw processing packages. Any ideas how to keep them B&W, rather than converting to it after processing?
thx!!

By its very nature RAW images are color because color is captured by the
sensor and raw is simply the raw data captured by the sensor. If you want
black and white from the camera then you would have to shoot JPG or TIFF if
your camera offers TIFF. Now the black and white marker should be included
in the RAW file so if your use the software that came with your camera then
it is very likely that software would see that marker indicating that you
had black and white turned on and simply convert the color RAW to black and
white and show you that. You might think that you are getting a black and
white RAW file but you aren't it is just the camera makers software seeing a
simple flag and then doing the black and white conversion. Since these flags
are generally proprietary Adobe doesn't read them.
In the end you are better off doing the conversion to black and white
yourself. There are many ways of doing it even in Adobe Camera RAW and you
will always get better results.
Robert

Why is my black and white video showing purple/green color cast from ProRes 422 h264?

When transcoding from ProRes 422 to h264 in Adobe Media Encoder, I'm seeing both green and purple color cast on my black and white video. ProRes on top, h264 on bottom.
https://www.dropbox.com/s/dqzkkje3ccgravb/Screenshot%202013-10-28%2013.33.27.png
Another example:
https://www.dropbox.com/s/5e1qyhmycgwbpkt/Screenshot%202013-10-28%2014.14.36.png

What do you make of the fact that the same video, encoded in MPEG Streamclip does not have the issue on the same hardware, played in Quicktime Player?
A valid data point for consideration, but the only way to know with certainty is to get the image onto a calibrated TV.
Observation will always trump deduction. So...observe! (Just be sure to do it accurately with a calibrated TV.)
The Vimeo preset is creating H.264 MP4 files. AVCHD is a very specific subset of the H.264 codec, and cannot be generated by PP.

Black and white, with small amount of color!

Similar Messages

Maybe you are looking for