Black area showing in Maps

I'm getting a big squared black area near to where I live, so if I try to make a route that goes through that black area it just won't create it.
That black area dissapears when I zoom out a lot (almost showing the entire country) but it persists when I zoom in. I have also discovered that it shows in Hybrid and Satellite, but it doesn't show in Standard.
I've tried restarting the app, restarting iPad... and the problem is still there. This is happening since 1-2 months. I also have looked for info on the internet and found nothing similar to this, anyone knows what could it be or some solution? this is really frustrating
I uploaded a couple of screenshots so you can watch it, is the same area with different levels of zoom:

i think what you have found is a missing map in the system. Out of curiosity i is this Spain?
In any event, under the curled up tab in the bottom right should be a link to report this problem directly to apple maps. They don't know unless somebody tells them. I also note you are running 6.1 - the screen look somewhat different in 7.1.1 - but the maps are likely the same.
kinda makes you feel funny when where you live does not show up...

Similar Messages

Black areas are showing up as green

Since I upgraded to Firefox V:8 some of the images show the black areas (background, shadows, and the like) as a bright green. If I change to the IE engine, the problem goes away. I've messed with disabling the add-ons, without any repeatable fix. Sometimes, disabling one of them will fix the problem, until the next day, when things are messed again(?).
The problem seems to link to JPEG images, but I am not going to guarantee that just yet.
http://ashleymichelew.blogspot.com/ is one place I've seen the problem.

That can be caused by a problem with the color profile for your display monitor or color profiles embedded in images.<br />
You can disable color management to test that.<br />
You can set the pref gfx.color_management.mode to 0 on the about:config page to disable Color Management.<br />
You need to close and restart Firefox to make the change effective.
See:
* http://kb.mozillazine.org/gfx.color_management.mode

Acrobat 9 Pro has started showing incorrect black areas

My Acrobat 9 Pro (Win 7) has started displaying black areas where normal content should be, The same PDF files display correctly with Adobe Reader. This same
Acrobat worked fine for a long time, but a few months ago began displaying black instead of some content.
Sorry, but I couldn't find a "community" that fit this issue so I put it under Installatiohn & Update. Feel free to change the secton.

Hey,
With the end of support for Acrobat 9, it might not be possible to find updates there.
You can access Acrobat 9 updates for the version 9.5.5. via the following link:
For Windows: "ftp://ftp.adobe.com/pub/adobe/acrobat/win"
Hope this helps.
Regards,
Anubha

Replacement screen shows all Blacks are instead, Super-Blue's!

My original Dv7-3065dx screen went blank with the back-light still going. Every so often, it would work for a second, then go blank again. so i changed the cable and screen. The new screen worked, except now all the blacks, are super blue! So, of course i thought i got a bad screen, so got another one, but this time it seemed even worse! Upon turning it on, the windows symbol, even steaked blue across the screen, then same thing, all blacks, super blue!
I do want to mention, just in case, the fact that i purchased after market screen, from Amazon, for like $85, that had a converter cable on the back running from the left side connect to the right side connect, so i could connect on the right side.
Could these cables on the back of the aftermarket screens be causing this super blue problem?
I have check connections, to make sure it is pluged in like it should be.
External monitor works fine.
Also, i have already dissassembled the entire laptop, and cleaned the fan and re-thermo'ed the cpu! Runs alot cooler, screen works, but all the blacks, are still super blue, with occasional blank screen period.
What's next?
Anyone?

OK!!!!!!!!!!!! I got my 3rd screen in today, from the site you told me about. I got the one w/o the converter cable on the back of it. AND GUESS WHAT?????????????? IT FRICKIN WORKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
AMAZON SELLS CRAP FOR SCREENS!!!!!!!!!!!!!!!!
I almost kept the 2nd screen, because i thought there was no way it could be both screens, BUT IT FRICKIN WAS!
Sorry for all the caps and !!!!!!!!!!!!, but i am happy and pissed at the same time, because of the headache AMAZON caused me!
Anyway, i am hoping you also tried the one with the cable on the back, so if you did, your problem should be fixed with this also!
Let me know.

Images with black blotches showing up.

I have a wierd problem with picture quality that just started showing up.
The black detail in certain areas of the picture is becoming overly black. Blotchy black areas especially on the screen and in prints. Black detail becoming overly compressed. The gradation between light and dark on my 23 HD and 17 Cinema display shows as layers of black, not a continual gradation to black. To explain it another way, the gradation of black colors (when going from light to dark to black) appears on the screen almost like Newton's Rings. I'm starting to get blotches of black in the darker areas of my monitor images and now on the prints. All the pictures are RAW (shot in Adobe 1998) from a Nikon D70s. None of the images have been altered in any way. No color correction, exposure increase or decrease, nothing. Straight RAW files imported directly into Aperture from the camera. I have printed all these pictures before and they looked fine. Now they have these black blotches in them. Not all pictures have the problem but the ones that have the darker black gradations (primarily to deep black).
I have a custom .ICC profile I use for printing and the monitor was calibrated too, using ColorVision tools. Spider2Pro and PrintFix Pro. But even is I use the standard profiles for the monitor and the printer, it's still the same.
The wired thing is, if I open the image with an external editor, Photoshop CS2, I do NOT get the same problems on the screen as I do with Aperture. (I have not printed yet from Photoshop CS 2 since this started, only viewed.)
This is just a recent problem, and as I said, I have been printing the same pictures before and viewed the same pictures before with no problems. I noticed this starting to happen after the last 2 updates for Aperture, and it has progressively gotten worse.
Any picture that has a continual gradation from a light black to dark black to full black has this problem. (On a 9 zone gray scale - say zone 5 thru 9)
Equipment Notes: Aperture 1.1.2, Mac OS 10.4.7, Apple 23 HD display, Apple 17 Cinema Display, Dual 2 GHZ PowerPC G5, 3.5 GB RAM, 2 SATA internal Hard Drives, (the one with Aperture has 30 GB's left on it and the other that I use as Vault Back-Up has 164 GB's available. Video Card - ATI Radeon 9600 Pro, AGP bus, 64 MB RAM
Epson Printer - R2400, using K3 inks on Premium PhotoLuster paper.
Does anyone else have this problem? Do you know how I send this problem to the Aperture Team?
P.S.
I too have notice a tremendous slow down in Aperture as of late as other people have stated.
I too sometimes don't get a image in the viewer. I sometimes only get the Right half of an image in the view. I can get other pictures to the left and to the right of the image in question but Aperture sometimes just picks a picture to only give me half. I must shut down and re-open Aperture to get the complete picture on the screen again. I can't figure that one out.
Thanks,
Jim

Well, besides my 2 previous posts, I would like to add something. I started printing and everything was going well once I turned On Screen Proofing off.
Oh, I guess I must first point out that I have calibrated my Monitor and Printer, using ColorVision's Spyder2Pro for the monitor and their PrintFIX Pro for the printer. It looks pretty good. But here is the problem.
As I started to say, after I turned off On Screen Proofing everything looked good, on my screen and my prints. I started to print using my Colorvision settings and my custom ColorVison printer profile. It worked for a while on some prints but I ran a print with a long gradation of black to deep black and that replicated my original problem. Blotchiness and striations of black. I found that if I printed with Epsons' ICC profile it was fine. So the ColorVision profile didn't work on some prints with deep gradations of blacks.
So I called their tech support. They asked if I did their 225patch target or the more extensive 700 patch target (I'm not sure of the correct number of patches). I had done the shorter 225.
They told me this is a common problem if you only do the 225 Patch Target and that I would have to do the 700 Patch Target to not get black patches/striations in my prints. As a note: the striations looked exactly like the On Screen Proofing problem when it was turned on.
So as it turns out, I had 2 problems at the same time.
I haven't done the 700 patch test yet. I'll let you know when I get it done, how it works out and if the On Screen Proofing matches the print as suggested by firstlaunch.
thanks for all your help and suggestions!

Blue lines in black areas using external monitor

I am running my 13" MB Pro hooked up to a ViewSonic LED LCD Monitor (VX2250) (DVI link using generic knock off mini-display to DVI adapter).
The problem I'm having is that black areas on the monitor will have fuzzy horizontal blue lines running through them. So if I'm doing graphic design stuff that has black areas, these fuzzy lines will show up. Sometimes they are thin, sometimes they are thick.
If I move the black area around, the lines stay in the same place relative to the black area. They don't stay put relative to the screen (if that makes sense). So I'm fairly sure its not the monitor, as I would imagine they would stay in place within the monitor if the monitor had issues.
Any suggestions? Could the knock-off DVI adapter be the culprit (never had this problem on an older non-LED LCD display using same adapter). Thanks for any suggestions.

Anyone?

How do you make the black area in an FLV playback white or transparent

Trying to make the FLV playback black area white or
transparent, because there is a black flash that shows up when play
the movie. I am trying to alleviate this by changing the black area
to another color or alpha.

In your publish settings, click on the HTML tab and look for
a field entitled 'Window Mode'. One of the choices is 'Transparent
Windowless'. This should work if you have objects that don't have
backgrounds. If you are looking to make video transparent, so far
in my experience, the only video I have been able to make this work
with is a Quicktime Animation with the RGB + Alpha. Also, when you
import your video to the stage, make sure to click on the 'Encode
Alpha Channel' box. That will give you the transparency you're
looking for.

Only the constants are showing up in the target values.

Hi Guys,
Please help me about my problem in message mapping..
Im quite knew in XI version 7.0.
How come Only the constants are showing up in the target values. my constant values are only doc_type and partn_role.
The rest are data from sql. How can I solve this..Please help.
This is the result of my test tab
Left side - sender
<?xml version="1.0" encoding="utf-8"?>
<ns:MT_TRAVEL_SENDER xmlns:ns="HTTP://TRAVEL.COM/TRANSACTIONS">
   <row>
      <DOC_TYPE>ZTRV</DOC_TYPE>
      <SALES_ORG>4000</SALES_ORG>
      <DISTR_CHAN>40</DISTR_CHAN>
      <DIVISION>41</DIVISION>
      <SALES_GRP>411</SALES_GRP>
      <SALES_OFF>4101</SALES_OFF>
      <PURCH_DATE>2008-10-24</PURCH_DATE>
      <PMNTTRMS>Z015</PMNTTRMS>
      <PURCH_NO_C>AVADIUDS </PURCH_NO_C>
      <PARTN_ROLE>AG</PARTN_ROLE>
      <PARTN_NUMB>0001100074</PARTN_NUMB>
      <INSERTED>1</INSERTED>
   </row>
</ns:MT_TRAVEL_SENDER>
right side -test result under receiver
<?xml version="1.0" encoding="UTF-8"?>
<ns1:BAPI_SALESORDER_CREATEFROMDAT2 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
   <ORDER_HEADER_IN>
      <DOC_TYPE>ZTRV</DOC_TYPE>
   </ORDER_HEADER_IN>
   <ORDER_HEADER_INX>
      <UPDATEFLAG>I</UPDATEFLAG>
      <DOC_TYPE>X</DOC_TYPE>
      <SALES_ORG>X</SALES_ORG>
      <DISTR_CHAN>X</DISTR_CHAN>
      <DIVISION>X</DIVISION>
      <SALES_GRP>X</SALES_GRP>
      <SALES_OFF>X</SALES_OFF>
      <PURCH_DATE>X</PURCH_DATE>
      <PMNTTRMS>X</PMNTTRMS>
      <PURCH_NO_C>X</PURCH_NO_C>
   </ORDER_HEADER_INX>
   <ORDER_PARTNERS>
      <item>
         <PARTN_ROLE>AG</PARTN_ROLE>
      </item>
   </ORDER_PARTNERS>
</ns1:BAPI_SALESORDER_CREATEFROMDAT2>

Hi leelaratnam morampudi ,
How can I check if im getting the data in sql? I think it get the data but dont pass the value in bapi
this is the test result in sender
<DOC_TYPE>ZTRV</DOC_TYPE>
<SALES_ORG>4000</SALES_ORG>
<DISTR_CHAN>40</DISTR_CHAN>
<DIVISION>41</DIVISION>
<SALES_GRP>411</SALES_GRP>
<SALES_OFF>4101</SALES_OFF>
<PURCH_DATE>2008-10-24</PURCH_DATE>
<PMNTTRMS>Z015</PMNTTRMS>
<PURCH_NO_C>AVADIUDS </PURCH_NO_C>
<PARTN_ROLE>AG</PARTN_ROLE>
<PARTN_NUMB>0001100074</PARTN_NUMB>
<INSERTED>1</INSERTED>

Not all my songs are showing in itunes even though they are in the Itunes Media file directory

Not all my songs are showing in itunes even though they are in the itunes Media Dir. I have spent hours trying to find out why so I moved the songs out of the Music/itunes/itunes media and uninstalled itunes. I then restarted my pc and re-installed itunes. When I opened itunes the same songs are still there (but cannot be played as cannot find location) even though I have not put anything back in the itunes media dir. To me there seems to be a refreshing problem as itunes is not looking at the directory even through the advanced preferences area is mapped to the correct area.
Help please.
Thanks

Apple's official advice on duplicates is here: Find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership, or that sometimes the same file can be represented by multiple entries in the library and that deleting one and recycling the file will break the other.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
See also Make a split library portable for some thoughts on best practice when it comes to organizing the library and media files.
tt2

Lightroom 5 - in all of the panels starting with Basic all titles are showing "Reset".

Lightroom 5 - in all of the panels starting with Basic all titles are showing "Reset". For example, Tone is now showing Reset Tone - Resent Presence.
In all panels the titles are showing "Reset". Can you please explain and tell me how to fix?
Thank you,
Louise

Sounds like you have an [Alt/Opt] key stuck down. Pressing this key changes to the Reset mode. If your key isn't stuck, did you recently custom map some keystrokes?

HT201412 My ipad screen remains black and show a persistent apple logo.

My ipad screen remains black and show a persistent apple logo. Sometimes it turn on and off automatically every 5minutes. I have already restored iOS software for 3 or 4 times. I have also seen with the apple genius supporter. The problem still remain the same. Does anybody have any suggestion beyond that? I dont know how many people are experiencing the same problems. Why dont apple solve this issue seriously? My rating to apple would become dramatically decreased to zero. I have decided not to buy apple product anymore.

We are not Apple here .. you should bring your concerns to their attention.
http://support.apple.com/kb/HT4623

Inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model

Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Output of show policy-map

Hi experts,
below is the output of show policy-map.
PE3-AMS-EU# show policy-map int serial 3/0/10:0 o
Serial3/0/10:0
Service-policy output: rao-pe-out
Class-map: pe-management-output (match-any)
0 packets, 0 bytes
30 second offered rate 0 bps, drop rate 0 bps
Match: access-group 107
0 packets, 0 bytes
30 second rate 0 bps
Queueing
queue limit 144 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
bandwidth 8 kbps
Exp-weight-constant: 7 (1/128)
Mean queue depth: 0 packets
class Transmitted Random drop Tail drop Minimum Maximum Mark
pkts/bytes pkts/bytes pkts/bytes thresh thresh prob
default 0/0 0/0 0/0 65535 65535 1/10
6 0/0 0/0 0/0 45 72 1/10
Class-map: pe-class1-output (match-any)
131960 packets, 8445440 bytes
30 second offered rate 249000 bps, drop rate 33000 bps
Match: ip precedence 4
131960 packets, 8445440 bytes
30 second rate 249000 bps
Police:
216000 bps, 2000 limit, 2000 extended limit
conformed 113909 packets, 7290176 bytes; action: transmit
exceeded 0 packets, 0 bytes; action: drop
violated 17856 packets, 1142784 bytes; action: drop
Class-map: pe-class2-output (match-any)
158740 packets, 64127887 bytes
30 second offered rate 1897000 bps, drop rate 157000 bps
Match: ip precedence 6
158740 packets, 64127887 bytes
30 second rate 1897000 bps
Match: ip precedence 2
0 packets, 0 bytes
30 second rate 0 bps
Queueing
queue limit 144 packets
(queue depth/total drops/no-buffer drops) 70/13397/0
(pkts output/bytes output) 149343/60928439
bandwidth 1586 kbps
Exp-weight-constant: 7 (1/128)
Mean queue depth: 69 packets
class Transmitted Random drop Tail drop Minimum Maximum Mark
pkts/bytes pkts/bytes pkts/bytes thresh thresh prob
default 10/575 0/0 0/0 65535 65535 1/10
6 149333/60927864 13191/5381928 206/84048 45 72 1/10
2 0/0 0/0 0/0 14 36 1/5
Class-map: class-default (match-any)
1352 packets, 546208 bytes
30 second offered rate 16000 bps, drop rate 45000 bps
Match: any
1352 packets, 546208 bytes
30 second rate 16000 bps
Queueing
queue limit 144 packets
(queue depth/total drops/no-buffer drops) 140/16394/0
(pkts output/bytes output) 101943/6932124
bandwidth 176 kbps
Exp-weight-constant: 7 (1/128)
Mean queue depth: 185 packets
class Transmitted Random drop Tail drop Minimum Maximum Mark
pkts/bytes pkts/bytes pkts/bytes thresh thresh prob
default 101943/6932124 0/0 15008/1020544 65535 65535 1/10
5 0/0 0/0 1386/565488 14 36 1/5
6 0/0 0/0 0/0 45 72 1/10
0 0/0 0/0 0/0 14 36 1/5
The min and max thresold value in the output are 65535 for default class.what is the significance of these values and what are those meant for.Why the values are 65535 ..

Explanation for the threshold value 65535:
For example if you consider Class-map: class-default (match-any), WRED is configured only for IP Precedence 5, 6and 0, then rest of the IP Precedence values will come under the default, with no WRED configured. So under the default, tail drop is used for dropping the packets, instead of WRED.If there is no user-configured default profile, the default action is to tail drop. The value of 65535 displayed for max and min thresholds when there is no default configured is expected behavior; it just means we are going to tail drop.
I got the above solution from Developer.
Thanks,
satish

Pictures are showing up "x ray"

Picasa and photos taken are showing up x ray.

When White on Black is turned on, the screen looks like a photographic negative. To invert the screen’s colors: go to Settings > General > Accessibility and tap the “White on Black” switch to OFF

Black lines show up on final print

In CS4 when ever I save to PDF and try to print my document these horizontal black lines show up. They are most notable around areas with varying transparency.
This happen to anyone else? Any ideas?

Is your print head clean and are you using the right paper? Sounds like it's simply spitting too much ink on the paper and it smears... also reset your printer driver settings, if you used some "Saturation" tweaks. This will increase the amount of ink used and further the issue.
Mylenium

Black area showing in Maps

Similar Messages

Maybe you are looking for