Black bars with 1600 x 900

Hello im trying to make a counterstrike source movie and im recording my footage in 1600 x 900 and 16:9 so i finally figured out how to setup
a CUSTOM sequence and get my resolution in there as 1600 x 900 and 16:9 but the issue i am having is the black bars once i export. ive researched on these forums about this issue and some people say to scale it?? not quite sure what that means but im using the sequence settings desktop with 1600 x 900 and 16:9 when i export i also select use sequence settings. any help would be appreciated. thanks

to answer your question im using counterstrike source video game and the start movie command in 1600 x 900 and 16:9 resolution. ive also tried virtual dub and i can get it to where it has no bars on virtual dub but not adobe. hopefully this is all the settings you asked for. maybe it has to do with me not knowing what settings to use?? but this is as close as ive gotten
using the i frame only mpeg for the codec(only one i could do a custom res on i think)
width and hieght 1600 x 900
pixel aspect ratio d1/dv  ntsc widescreen 16:9(unsure of what to use closest i could find)
here are the properties of the video i made with no bars that im trying to edit in premier
Type: AVI Movie
File Size: 8.7 MB
Image Size: 1600 x 900
Pixel Depth: 0
Frame Rate: 60.00
Total Duration: 00:00:07:08
Average Data Rate: 1.2 MB / second
Pixel Aspect Ratio: 1.0
basically this gives me a video with no bars on top which is great. but it has bars on the side which is not so great.

Similar Messages

  • Can I get rid of the black bar with the icons on f...

    When on cam with a friend the black bar with the cam, mic icons fills part of screen can I remove this and still get the box to type in

    I have the same problem and hope someone has a solution.

  • Black Bars With 16/9 JPEG's and AVCHD in Video

    I have Final Cut Express 4.0.1 and trying to use AVCHD video from my Sony NEX-5C camera along with JPEG pictures shot in 16/9 from the same camera. After importing everything I wound up with black bars above and belowin the viewer on everything and can't rid of them. I made a test video with one16/9 still picture and tried various settings before importing the picture, but still couldn't get rid of the bars. Also, I can't find a combination of exportsettings that eliminate the problem. I have tried exporting to a standard DVDusing Apple's "16:9 workflow for IDVD".
    Any suggestions on how to make this work?

    Thanks for prompt reply. I use FCE occasionally, so I am not 100% sure that I am answering your questions properly.
    I checked the properties on one of the JPEG's and don't see "Format" listed. However, it is shown as 2390 x 1369 and the Pixel Aspect is "Square".
    One of the video clips is shown as 1920 x 1080 @ 29.97fps. Pixel Aspect is "Square" and the Compressor is" Apple Intermediate Codec".
    The Sequence shows 720 x 480 Frame Size @ 29.97fps; Compressor is DV/DVCPRO-NTSC and the Pixel Aspect is NTSC-CCIR 601.
    The Sequence Aspect Ratio is wrong, but I don't know how to change it.
    Thanks,
    Brian
    PS: I checked the Sequence Preset and it is now on Apple Intermediate Codec 1920 x 1080/60.

  • A narrow black bar with text in it telling me what I am doing, has appeared on my screen. Also, there's a voice over speaking the same thing. How can I get rid of it?

    I was checking out some keyboard shortcuts when a black bar appeared with white letters repeating letters as i type. Then telling me where i am and what I'm doing. Also a voice over started, telling me what I was doing. How can I stop this and get rid of the black text bar? It even creates text boxes and things without asking. Help!

    THANK YOU SO MUCH!!!! This is the first time I've had a question and it was answered within the first click.  Silly cat decided he wanted to play on my computer and turned on a bunch of weird stuff. Including this. 

  • Black Bar with Quicktime Media in Vista x64

    When I try to launch Quicktime media files in Firefox or IE I get a black bar instead of the playback controls. However, when I make the browser run in "Windows XP" Compatibility mode the controls run fine, but my theme runs in windows vista basic.

    QuickTime Player is not supported on 64 bit Windows OS's and this is a known "bug" for these users.
    "Compatibility Mode" uses a 32 bit version with proper results.
    You must choose.

  • Aspect Ratio - Black Bars Left and Right on Widescreen TV

    Hi - I have downloaded a couple of TV series to my laptop PC using ITunes. These playback on my laptop screen filling the screen. I got an Apple TV yesterday, synced it with my Laptop ITunes library and there are black bars on either side of my 1080 widescreen TV. There are no black bars with DVD or Cable. The apple TV splash screen fills the whole of my widescreen. I have tried playing with the resolution settings on the TV and on my Apple TV settings but as yet not figured out how to fix this. Any ideas?

    bear in mind that tv broadcasts are often stretched/zoomed/cropped etc to make it appear that it is widescreen, when really it is 4:3.
    also it is possible that your TV is simply stretching to make it fill your screen.
    your TV may be able to stretch it to fill the screen, but the appletv will always output it in the correct aspect ratio.
    also it is only recently that most of the tv output has been widescreen. 6 years ago when wire season 1 was produced, 4:3 non-widescreen was very much the norm, especially in USA.

  • Premiere Elements 7: share/export DV-PAL in FLV/QT/WMV, black bars on top/bottom

    During export (step "share", export for "PC" - sorry, if I use some wrong terms, got a german interface) of only DV-PAL video to FLV/QT/WMV there are always black bars on top/bottom of the video and the picture is wrong in aspect ratio. I can't help.
    I tried different resolutions (original 720x576, 502x402, 320x240) and, as only possible with QT/WMV, different pixel aspect ratios (PARs), even user-defined PARs and 'wrong' aspect ratios (like 512x402). No chance. (I think precise user-defined data like "1,094" is not possible, because results did not change anyhow and this value is shown as "1".) With e.g. QT, 640x512, PAR 1,067 there are black bars with 6 px each.
    My project settings must be correct I think: DV-PAL, 720x576, 4:3, 25 fps.
    DV-PAL- and MPEG-Export/Share is no problem.
    As a workaround I export DV-PAL and convert with XMediaRecode to FLV. But I want direct and clean export with PrEl. That's what I bought it for recently.
    I wonder why there are only NTSC-setting suggested in FLV-share. I have to change the size by myself.
    And I wonder why Wikipedia says PAR for DV-PAL is "1,0940" and Premiere says "1,067".
    I'm new to Premiere Elements 7 (although I got some experience with Premiere 5/6.5, FinalCut, Cinelerra ...) using Windows XP.

    I posted two videos on muvipix.com:
    WMV cable modem settings PrEl (without audio, fps like original)
    Strange: in VLC media player there are bars on the left and right (and slight faded bars on top/bottom - hope you can see) and in muvipix.com and Media Player Classic there are bars at top/bottom
    http://muvipix.com/cpg/displayimage.php?album=lastup&cat=17219&pos=0
    http://muvipix.com/cpg/albums/userpics/17219/Unbenannt.wmv
    FLV (no resize, without audio, fps like original)
    black bars on top/bottom, but only slight in Media Player Classic
    http://muvipix.com/cpg/displayimage.php?album=lastup&cat=17219&pos=1
    http://muvipix.com/cpg/albums/userpics/17219/Unbenannt.flv
    I had to deactivate sound because this is Creative Commons stuff and I don't want to give credits. And I changed fps to "like original" because 30 fps as standard in PrEl is wrong. It's PAL here.
    Thanks for your efforts.

  • I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

    I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

    I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
    I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
    What is wrong and what should I do?

    Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
    The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
    Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

  • Just got new iphone 4s. trying to edit photo but screen is black and with a "constrain" bar at the bottom of my screen, can't clear it or get back to photos

    Just got new iphone 4s. Trying to edit photo but screen is black and with "constraint" bar at the bottom.  I am unable to clear the black screen or get back to photo gallery.  Help!

    - Exactly what are you doing? You saying you are trying to syn it to new comnputer. When yuo sync it to a new computer iTunes will erase the iPod and replace its contents with what is i the iTunes library of the new computer.

  • Windows 7 bootcamp show black screen with a small white bar

    I just upgraded my iMac mid 2011 21.5" with a crucial m4 SSD. The SSD is plugged in the disk 1 DATA port and on the SSD power on the motherboard. I fully installed Windows 7 with all the driver and updates. My mac is upgraded with the lastest update. The crucial m4 firmware is 009. I installed no driver for the SSD.
    The problem is that when I start my bootcamp it only show a black screen with a small white bar on the corner. I waited about 5 minutes before to close the computer manually. The only way my bootcamp work is when I put my Windows 7 DVD in the reader for the startup.

    Sometimes windows installation will install a WDM driver for ati or nvidia. It causes the screen to go black altho ugh everything else is running in the background. I found that using an external monitor will allow you to see the screen so that you can install the lastest bootcamp drivers. After the drivers are installed the screen comes back.  I reinstalled windows 3 times and tried all other solutions including repairing the hard drive in disk utility.

  • HT4623 so i downloaded the iOS 7 onto my computer. then wanted to upgrade. iTunes is waiting to connect to the phone after the restart. now it's stuck in the black screen with the white apple with the progress bar. then i look to iTunes and found out it s

    so i downlaoded the iOS 7 onto my iTunes. then i wanted to upgrade. the phone is stuck in the black screen with the white apple and the progress bar. next time i click on iTunes, it says my phone "has an error and cnanot update" and now it is stuck on the black screen with the white apple and the progress bar almost finished. hasn't moved in 20 minutes.

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • Black bars in Windows 7 with mac mini and AMD 6630M HD

    I bought a new i5 Mac mini.
    I installed win 7 home premium 32 bit on it without a problem using boot camp from Lion. However windows does not totally fill the screen. There are black bars on all side of the display. About an inch thick.
    I have the mini connected via HDMI to my sharp Aquos tv @ 1080p.
    What can I do to fox this? My previous mini did not do this with nearly the same setup. There is now where to downlaod drivers for the AMD 6630M HD card in this mini.

    Hi PaulJO
    I have the same problem when I tried downloading and installing the catalyst suite software from AMD web site, it told me that my graphic card was not compatible. Which I know is!!
    Any help on getting the driver?!?!

  • Firefox on my wife's laptop has lost the black bar that used to show Maps, Gmail etc. Now at the top of the screen there is a blank bar, triple height, with just the Google search input box. How do I get this back? Or is this a question for Google?

    When I open Firefox there is a black bar, sometimes vertical, other times horizontal, across the top, with links to Maps, Gmail etc. When I open Gmail the same links are listed across the top of the screen, right under the Tabs. In my wife's laptop this appears in the Firefox start-up screen, but not in the Gmail screen. At the top of her screen is a super-wide gray bar with just a Google search input box. Is this a Firefox or Google problem?
    She has XP Home SP3 and Firefox 9
    Thanks for any help.

    What happened yesterday may have been caused by the SOPA protest action that was joined by a lot of sites yesterday and such an action won't happen that often.
    * http://en.wikipedia.org/wiki/Wikipedia:SOPA_initiative/Learn_more
    *http://en.wikipedia.org/wiki/Wikipedia:Bypass_your_cache

  • IMovie is outputting my movie with big black bars at top and bottom that I don't want

    Quicktime: Ver 10.3
    iMovie: Ver 10.0.5
    OS: OS X Ver 10.9.4
    So, let me try and explain...
    I have recorded gameplay footage of my game directly from my Mac screen using Quicktime's Record Screen option. I've tried recording both in fullscreen mode (with my game also running in fullscreen mode) and a section of the screen by dragging the mouse to select a 640X960 box (with my game running in windowed mode which is displayed at 640x960 resolution).
    This initial recording direct from the screen displays fine, both when I view it in windowed mode and when I view it fullscreen, with the height of the game stretching to the full height of the video area but obviously with big black borders to either side in fullscreen mode (as it's basically iPhone ratio in portrait mode).
    WindowedFullscreen
    This ^^^ is how they should look.
    The problem is when I try to import the movie into iMovie, mess around with some fade-ins and music and stuff and then output the edited movie via iMovie...
    When I then try to view this outputted movie in windowed mode on certain sites (Kickstarter) my game footage doesn't take up the full height of the video and instead floats in the middle with big black bars at the top and bottom, which I don't want. It's fine when I go fullscreen but the problem is that when I load this video into Kickstarter it shows the non-fullscreen view of the video with this big black border and it looks really amateur.
    This is what Kickstarter shows in windowed mode i.e. the way you see Kickstarter videos by default when you press Play; unless I go fullscreen and then it takes up the full heigh of the view.
    Note: Windowed mode actually looks fine when viewed directly on my Mac but I know it's not Kickstarter that is causing the issue because I can see in the thumbnail preview on my Mac that the video is somehow encoded with the big black bars at the top and bottom. Also, I uploaded the unedited videos to Kickstarter just to check and they display fine. So it's definitely iMovie that is adding these annoying black borders at the top and bottom for whatever reason (and I'm not intentionally scaling the video down in iMove or anything like that as far as I know). I also can't use the unedited footage however because it has no sound and no transitions etc.
    Does anyone know what night be causing this and how to get rid of it.

    You are lucky to see anything - iMovie 5 is not really compatible with Snow Leopard, which only supports iMovie 6 and above.
    Snow Leopard only runs on Intel Macs. iMovie 5 was never written, AFAIK, for Intel, just for the PPC Macs they had in those old days!

Maybe you are looking for