Black Berry Messenger, using & finding other users, Does anyone use the B Berry Messenger ?

Does anyone else USE or have the Black Berry Messenger on their 8330 CURVE model B Berry ? If so, r u social enuf to wanna meet other B Berry users ONLINE and How do I find other Black Berry Messenger users to communicate / chat with directly ? My BlackBerry e-mail address is :[removed personal information] thank U in advance. I have had my phone only about one week or so and am definitely in the "LEARNING CURVE" about it ! Thanks again ! Sincerely Charles in Norfolk,Va. USA
Message Edited by dany_s on 01-26-2009 01:09 PM
From the Black Berry of Charles W. Merritt
Solved!
Go to Solution.

cwm1955 wrote:
Dear Mr. XANDREX I have already read alot of the "HELP" documentation on my device. NONE of it covers ANY of my three (3) issues here! My issues are ADVANCED and the HELP documentation is meant for a VERY 101 BASICS beginner. I am really looking for help here, your response did NOT help me ! While I thank U for your valuable time in responding, NO THANK U since U did NOT help me ! I WANT SOMEONE THAT REALLY HAS KNOWLEDGE OF MY ISSUES and how to REALLY HELP ME !People if U cannot REALLY POSITIVELY ASSIST me with REAL ANSWERS to my REAL ISSUES , please DO NOT WASTE MY VALUABLE TIME AND YOURS AS WELL! THANK U ALL IN ADVANCE ! Sincerely CHARLES
Wait, Sir Charles.
1. The two of us have offered you very valuable adivce, which you indicate in both cases you wish to ignore.
2. You have NOT mentioned any issues in your first post here other than you wish to be social, and now in your second post that you don't know how to add contact and wish me to email you directions. I don't give personal service, as a volunteer I answer questions right here in the threads.You'll just have to suffer through asking questions right here. It's a great forum where thousands of users have gotten help. And often, quite speadily as well.
3. Your last post is quite rude to a user who has spent lots of time helping users out around here, and quite honestly your words are uncalled for. Your ALL CAPS typing is considered yelling on internet forums such as this. No one likes to be yelled at. My mother taught me about gathering flys with honey rather than vinegar. You might try some honey yourself.
4. Adding BBMessenger contacts. Open BBMessenger > Menu > Add Contacts. Enter either the PIN of the other user you desire to add, or their email address. IF THEY are already on your BB Address Book, you can enter their name there. Follow the prompts you are given.
Message Edited by JSanders on 01-26-2009 08:30 AM
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I have 2 i4 phones. I can sign on to iCloud on 1 but never on the other. Does anyone have the answer to this. I have tried to change my password but I still have the same problem. I keep getting message "Verification Failed The request timed out"

I upgraded to 2 - i4 phones with 2 different phone numbers. I can sign on to iCloud on 1 phone but never on the other. I have changed my my password twice but no matter what I do, I still have the same problem. I keep getting a message "Verification Failed The request timed out" no matter how many times I try to sign on it always times out. Before I upgraded to the i4, I had a i3GS and had the same exact problem. Does anyone have any ideas???

Firstly, go to http://iforgot.apple.com and sign in with the ID you use for iCloud. A new password will be sent to your associated email address.
If that doesn't work, for example because it's going to an address you can't access, then you will have to contact Support. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password' and click 'Continue'.

Does anyone know the size of the visible websites that is shown in Safari, in pixels?

Im trying to design a page for a website to be used on safari browser, does anyone know the exact area that is seen without scrolling? In pixels please. thanks

Search for backup software on www.macupdate.com
SynchronizePro is just one. There are a dozen at least. SuperDuper is a volume cloning program that is popular too.

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

This is a user to user forum. Apple isn't here and won't answer you. You need to contact Apple directly. You can use the Contact button at the bottom of the screen.

RE: (forte-users) Does anyone have experience using OracleLarge Objects

hi ,
A few months ago, I tried a oracle stored procedure with a BLOB parameter,
but Forte(3.l2) could not recognize the blob variable. I used oracle 8.0
hth
suma
-----Original Message-----
From: Amin, Kamran [mailto:kamran.aminlendware.com]
Sent: Thursday, March 29, 2001 2:40 PM
To: 'Forte User Group'
Cc: Magaliff, Bill
Subject: (forte-users) Does anyone have experience using Oracle Large
Objects (LOB's)?
Does anyone have experience using Oracle Large Objects (LOB's) -
specifically the CLOB datatype? Forte supports Oracle LONG's but given that
Oracle is going to phase out that datatype and they're trying to push users
towards CLOB's instead of LONG's, I want to find out if Forte can handle it
and, if so, what we should know about mapping Forte datatypes to the Oracle
CLOB. [Their compatibility matrix for v3.5 indicates suppport under Oracle
8.1.x, and CLOB's were introduced back in 8.0.x - but the word from Forte is
that they currently don't support it.]
thanks in advance.
ka
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Hi,
Did you get any solution to this. If yes, please share.
Thanks,
Tints

Skipping a path using find in user directory

Does anyone know the syntax to search for a filename through the user directory, but skipping at least one (maybe more) paths within that user directory? I have tried this:
find /Users/casdvm $ -name AlbumData.xml \! -path /Users/casdvm/Library/iApps $
and this:
find /Users/casdvm -name AlbumData.xml \! -path /Users/casdvm/Library/iApps
And the results are the same for each:
/Users/casdvm/Documents/Cathouse/AlbumData.xml
/Users/casdvm/Documents/Family/AlbumData.xml
/Users/casdvm/Library/iApps/iPhoto/AlbumData.xml
/Users/casdvm/Pictures/iPhoto Library/AlbumData.xml
/Users/casdvm/Pictures/Review01/AlbumData.xml
How can I return all the files EXCEPT the one in the /Users/casdvm/Library/iApps path?

Hi casdvm,
The -path argument only evaluates to true if the argument matches the absolute path to the file being tested exactly, not as a substring. However, it will accept shell wildcards so you could use something like:
find /Users/casdvm -name AlbumData.xml \! -path /Users/casdvm/Library/iApps/\*
or even:
find /Users/casdvm -name AlbumData.xml \! -path /Users/casdvm/Library/\*
Gary
~~~~
Better to be nouveau than never to have been riche at all.

Using OS10.7, my hard disc is full. When I go to "About this Mac - Storage" almost all of the HD is occupied by "Other". Does anyone know what "Other" is so that I can remove some of it?

Using OS10.7, my hard disc is full. When I go to "About this Mac - Storage", it shows that it is entirely filled with "Other". Does anyone know what "Other" is so that I can delete some of it?

First, reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free for normal operation. You also need enough space left over to allow for growth of your data.
Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root.
First, back up all data if you haven't already done so. No matter what happens, you should be able to restore your system to the state it was in at the time of that backup.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

Other user can not see the data from the workbook

Hi Friends,
I created a workbook with some worksheets in a Business area. The owner of the workbook has no problem to view all the worksheets and get all the data returned.. I granted all the neccessary privileges to other users ,they could see the workbook, but no data returnd for the query results. Tried refresh the worksheet, same no data retrieved.Checked the SQL inspector and the plan, it showed the correct paths and execution plan without any errors there. The same query run in SQL plus by other users returned data correctly.
By the way, I had a summary folder in the workbook. During the troubleshooting, I dropped this summary folder, still the same no data return for other users.
Any body happen to know the cause or has some ideas on this issue?
The discoverer administrator verson is 9.0.4.00 and the PLUS /Viewer is 9.04.45.02.
Thank you very much,
J.K

Hi All
The scheduling of reports, as you have probably noticed, requires that the scheduling privilege within Discoverer Administrator tool be granted to the user NOT to a role. Scheduling will not work if you attempt this. The reason for this is that these two SYS grants must go to a user:
GRANT SELECT ON SYS.V_$PARAMETER
GRANT EXECUTE ON SYS.DBMS_JOB
The user will also need to have these grants:
CREATE PROCEDURE,
CREATE TABLE,
CREATE VIEW,
EXECUTE ANY PROCEDURE,
UNLIMITED TABLESPACE on user's tablespace
My new Discoverer 10g Handbook, which I would recommend to anyone working with Discoverer, explains scheduling in detail and even tells you how the tables and views that are used to store the results work. You won't find this information anywhere else, as you will see if you read some of the five reviews that have been left on Amazon.com. For more information about the book please look here:
http://learndiscoverer.com/books/books.htm
The PUBLIC grants are not having any impact. All these do is ensure that ALL users have the same basic privileges. You can just as easily grant these to any role of your choosing and it will work just fine.
By the way, because the PUBLIC role is the MINIMUM privileges that a user can have you might want to consider reducing the end user Discoverer privileges afforded to PUBLIC. By default, all users can Create and Edit workbooks, share workbooks, save workbooks and so on. This is far too rich a set of privileges for the basic user, who in most cases will be a VIEWER user. Whenever I create a new EUL I always recommend that my client reduces the PUBLIC user's privileges and then create new roles for more advanced VIEWER and PLUS users, adding privileges as required.
Thus, my basic VIEWER, aka PUBLIC, has only these privileges:
Collect Query Statistics
Item Drill
Drill Out
My advanced VIEWER has this additional privilege:
Save Workbooks to Database
My basic PLUS user has all of the above, plus these (pardon the pun):
Create/Edit Query
Create Link
and my advanced PLUS users get everything, which means they now get these as well:
Grant Workbook
Schedule Workbooks
I also remove the Save / Save As Actions link from Viewer which prevents the basic VIEWER users from knowing that it is there. In essence, because these users no longer can click the Save link and because they do not have the Save to Database privilege, they will not be prompted to save within Viewer no matter what they do. This now makes 10.1.2 Viewer work the same way as previous versions.
Even though the Save link is not there, my advanced Viewer users will be prompted to save if they have made any changes. This therefore allows you to have two classes of Viewer, one who can save and one that cannot.
I hope this helps
Regards
Micahael Armstrong-Smith

My MacBook Pro is really hot and the fan is on constantly. It didn't use to do this, does anyone know why this is happening? I have a very short battery life, so I have to keep it plugged in probably more than I should.

My MacBook Pro is really hot and the fan is on constantly. It didn't use to do this, does anyone know why this is happening? I have a very short battery life, so I have to keep it plugged in probably more than I should.

Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.

I have put Netflix on my Macbook Pro but Silverlight will not run. I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.

I have put Netflix on my Macbook Pro but Silverlight will not run.I receive a black screen that says "player error." Does anyone have a solution for this. Netflix support is not so hot.I can use Netflix straming thru my Blueray on my TV but it will not run on my Pro. Thanks

Try running Safari in 32 bit mode. In get info box for Safari,
check open in 32 bit mode. There have been some oddities
on some systems that can cause some issues.
I had thought MS had fixed this, but may not have.

My iPhone although i use iCloud to synchronize. does anyone have en idea what can be done?

i've been on lion for a week now, only to discover that ical on my mac book pro only showa a fraction of the appointments i've entered on my iPhone although i use iCloud to synchronize. does anyone have en idea what can be done

Try posting this in the iPhone and iCloud forums as well and you will probably get more response from users of those programs.
Good Luck
Pete

Export failing with "The user does not have the required rights to perfrom

We are testing an upgrade to BOXI 3.1. We use the CrystalReportViewer .net web control to view the report. When the export button is clicked and the Crystal Reports file format is selected, the following error message is displayed:
"The user does not have the required rights to perfrom this operation. Please contact your administrator. "
Notice that perfrom is not spelled correctly. This is what actually gets displayed.
I'm not too concerned about the spelling, but I do want to fix the error. So I checked the security on the folder and the user does have full control. Both advanced security options are selected:
-View document instances that the user owns
-Export the report's data
So what else could be causing this?

I had applied the full control access to the wrong group. Once I applied that access to the user that actually generates the report, it worked.

IPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution

iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?

Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT

Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.

Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.

Are you actually having a problem with the new Lacie drive, or are you just asking is the Lacie drive somehow different from your old G-Drive?
From a connection standpoint, most Lacie desktop drives have both USB and FireWire connections, just like the G-Drives do. You would connect and use it the same as a G-Drive.
Regarding capturing to the external HD, if you are using a camcorder that has FireWire (iLink) connection, it is not advisable to have an external FireWire HD connected to your Mac at the same time as your camcorder; there are often communication conflicts between the camcorder and the hard drive if they are connected at the same time. The conflicts usually appear as either dropped frames or a complete freeze. This is more common with Canon miniDV camcorders but I have also seen this behavior with Sony miniDV camcorders. (The problem is the camcorder's FW implementation, not the hard drive.) The workaround is to capture to your Mac's internal HD and later copy the captured video to your external HD.

Does anyone have the code to use an image button as the reset button?

Does anyone have the code to use an image button as the reset button? I'm finally at the end of the form and got the submit button to work as an image button, but cannot do the same with the reset button. Any help is greatly appreciated!

I agree.
http://www.456bereastreet.com/archive/200909/almost_never_add_a_reset_button_to_a_form/
Nancy O.

Black Berry Messenger, using & finding other users, Does anyone use the B Berry Messenger ?

Similar Messages

Maybe you are looking for