Black blue and white lines can it be fixed cant back up data cos i have passcode

can my iphone be fixed cant bac up cos it has passcode

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings      
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up                                                                
- Restore to factory settings/new iOS device.             
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar                                      

Similar Messages

  • Iphone 4s less than year old att, want work, blue and white lines black screen

    I have a iphone 4s with ATT, not even a year old.  I dropped phone and now the screen is black with blue and white lines.  I have attempted to reset the phone with no success.  Is this a matter I can resolve with ATT or do I have to drive to genuis bar to get resolved?

    It's probable that the iPhone has suffered hardware damage, and I don't believe an AT&T Store can do anything for you on such issues. You'll need to take or send your iPhone to Apple and pay their out-of-warranty service charge to get the iPhone replaced.
    Regards.

  • Cube Spin Transiton Shows Horizonal Blue and White Lines through out Poss BUG?

    Don't know if this is a bug but I am seeing a 2 to 5 pixel Blue Line (the same colour as the CTI, CYAN) on the Cube Spin Transition when in use in Premiere Pro CC.
    I am on 8.0.1.
    I also notice that it appears on the renders and exported material.
    Original Sequences are HDV 50i 1440x1080 and abit of 1980 x 1080 @29.97 MP4 Files taken from a Sanyo XACTI Camera.
    It is visable when both playing back and scrubbing or parking the CTI inbetween the 2 clips, I am also seeing a White Line not as think at times on the left side of the Transition.
    It looks like the Enable Overscan Transition setting that I used to have in EDIUS, where the default settings where set for 3% Overscan and had to be set to 0% for Transitions.
    I am using an ASUS 760GTX 4GB Card with MPE On.
    Just wondering if there was a quick fix before I go though and have replace this transition with a similar one, though have used it 30+ times in this project so far, am gonna have alook out see if I can see a free Cube Spin/Advance Type Transition on the internet to use as I purposely chose this on
    as it fits in well.
    anyway, I noticed this Line Appearing thoughout the editing process and thought that it was like Premiere Pro way of tell me that the transition had begun, like the show end of media indicator and not though that it would actually show in the final exports on the render, even on the downscale it shows when rendered to MPEG-2 DVD.
    I saw another post on this on here but that dates back to CS 5.5.
    I have attached a few grabs to show you. have to look very closely or download them as on whit background, but on the first there is a very thin white line and on the left of the frame and you will see the cyan line on the right a bit thicker
    The First one is the very start of the transition, where the CTI hits the 1st Frame of the Transition
    . Not on the left a Thin White Line and as Described on the Right the Cyan Slithly Thicker, Looks to be Same or Simialr Colour to The CTI.
    Then as the transitions moves, though, the left white line disappears and you have the right Cyan Line Showing all through the transition, until it is completed.
    As say, if there is a simple fix, then it would be appreciated so save having to alter all of the existing ones, as I say, kinda like the Cube Spin.

    Appols if the attached images are too big, my fault, not used to posting images, anyways, if you click on each image to show full screen then you can see the lines better.
    Anyway, anyone know a free one I can add in that works well?
    Thanks alot

  • Whenever I sign into Safari the web page will show black, blue, and white static. What is this? They said it is not a virus, but I am concerned there is something going on with my computer! Any recommendations on how to fix this?

    Whenever I sign into safari the webpage will show a static blue, black, and white screen for a few seconds. What is this? They said it was because I needed to update my software, well I have done that and it is still doing it. Any recommendations?

    If you cannot use COMMAND+R to boot into the recoveyr partition, see if a SMC and PRAM reset followed by Safe Boot helps:
    http://support.apple.com/en-us/HT201295
    http://web.archive.org/web/20140711222006/http://support.apple.com/kb/ht1379
    http://support.apple.com/en-us/HT201262
    If no success, if available, use another Mac and use target disk more to access the HDD in your MBP:
    http://support.apple.com/en-us/HT1661
    Ciao.

  • CSCul20838 - PI 2.0 Maps with black background and white lines

    This. Is a useless product bug solution Fremont a Network equipment software giant. You provide a solution which doesn't support CAD Drawings. The timeline given is next four months. If you canT use cad drawing than you can't get the client tracking acurict and if you sell the product for thousands dollar and don't give proper. Functionality than why the product is openly sold in the market???
    It gives shame on your products solution and support.

    So after all that it was just a coincidence that my graphic card failed me. Now I need a new one...any suggestions on what I should put in that's problem free?

  • Itunes 7.0.1.8 / xp --- momentary black screen w/white lines at startup

    I upgraded to itunes 7.0.1.8 about a week ago. It's been fine, except now when I start up itunes a black screen with white lines flashes momentarily, then everything reverts back to normal. I'm pretty sure it just started happening in the last couple days. Also, I just noticed that it only seems to happen when itunes starts up maximized. Otherwise, it's fine. The only thing out of the ordinary that I've done recently is to run an old DOS game that I never ran before. I guess I'm concerned that maybe the game may have done something to cause this. Anyone else out there getting the black screen with white lines at start up?
    Thanks.

    UPDATE/EDIT FROM PREVIOUS POST:
    Ok. The new 7.0.18 does repair the volume slider audio issue. HOWEVER, Simply installing the new update (at least for me) did **NOT** fix the problem. After posting my previous post, I tried to remove Quicktime and iTunes completely and try reinstalling.
    It turns out that when I uninstalled Quicktime from Add/Remove Programs, it didn't remove all the Quicktime files and it was not reinstalling Quicktime afterwards!!
    I only noticed when I downloaded the standalone version of Quicktime and tried running it and it said a "newer version" was on my computer, though it did not show up on my Add/Remove Programs file listing.
    So I looked in the usual places and found that I had a Quicktime folder remaining in the Program Files folder and one in the C:\Windows\system32 folder. I also had to manually remove the following files from the C:\Windows\system32 folder:
    Quicktime.qts, QuickTimeMusicalInstruments.qtx, the Quicktime.Resources folder, QuicktimeVR.qtx and the QuickTimeVR.Resources folder.
    The main problem is that iTunes didn't let me know there was an issue with the QuickTime installation. It just wouldn't run iTunes. There should have been a notification.
    Anyway, after all this, I reinstalled iTunes fresh and checked the volume slider and LO' And Behold! The volume slider issue was repaired.
    However, there is a LOT of skipping occurring that never happened before. Not sure what's up with that. CPU usage stays low and then I get a few skips per minute...UNACCEPTABLE!!! That didn't happen before and that issue will still need to be fixed. Until then, back to WinAmp. Thx a LOT Apple...you *#^@ing hosers!

  • No matter what website I am on all of a sudden the page will be covered in black and white lines and I can't see any of the page. What is happening and how do I fix it? It has only started since I loaded Firefox 4 this week.

    I am very frustrated because I keep having my pages become covered completely in black and white lines. It has even happened on this page when I tried to use the drop down arrow by 'this happened'. I can sometimes read the page if I click over the area I want to read but this is not common. This has only been happening since I downloaded Firefox 4. I thought this would be a better version but now I am not so sure.

    I do not want to download another virus program.. I do not believe it is a virus. I am running the full version of Norton 360 and it is doing a daily scan. I have Windows 7, 64 bit OS.
    This is very irritating !! If I wanted Yahoo I would ask for it !

  • When I come from outside and press the home button to turn my iPod on, there is white, light blue and red lines but it is transparent enough that I can see my background, time, etc. It hasn't been water damaged, so that cant be the problem.

    When I come from outside and press the home button to turn my iPod on, there is white, light blue and red lines but it is transparent enough that I can see my background, time, etc. It hasn't been water damaged, so that can't be the problem. I was thinking maybe it is just because of the cold but, I don't like having my iPod doing that whenever I come back from the cold. However, I was in class too and this problem happened but it was inside! So I am very worried, I have dropped my ipod a few times but it hasn't fallen that hard to effect it.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • How can I prevent my screen getting covered with black and white lines while working on the internet which only happens with firefox and only go when I 'go back' or go down a page?

    It happens as I surf - horizontal black and white lines particularly when I scroll down and only goes if I can go to a new page or go back a page. It is driving me crazy and only happens with firefox. I have disabled all plug ins but it still happens.

    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • Macbook display shows black and white lines when fullscreen

    If i leave my Macbook on for a while without shutting down and then I view a photo or movie (in player or safari) fullscreen the screen shows just black and white lines. Sort of like bad tv reception. It has happened a few times and a reboot has fixed it but it comes back. Any ideas anyone?
    Thanks

    I have a similar problem. Not sure you're on here (since the post is really old) but did you manage to work it out? How?
    My thread:
    https://discussions.apple.com/message/19007548#19007548
    My Imac froze earlier today as I was dragging an image from safari into indesig and when it froze the weirdest pattern overlaid the screen. It looked just like the opacity pattern from photoshop with grey and white squares. I turned the computer off using the power button and unplugged everything.
    Now when I try to start it these weird lines appear on my start up screen (see link)...
    http://meijerladdaruppgrejer.wordpress.com/2012/07/24/oops/
    as you can see the apple and the wheel appears as normal...
    ... then it moves to a normal looking white screen (perhaps a bit greener than usual) and around 30 seconds later freezes at the blue screen.
    I've tried the cmd + alt + p + r several times but it won't help.
    If i press alt during start up I can see and choose my hard drive but just end up at the blue screen again.
    Can I try starting it up in safe mode or something?

  • Scrolling with mouse on pages create black and white lines,

    When scrolling with mouse, periodically the whole screen turns into black and white lines. Sometimes whole page, sometimes just pictures/side ads. If you continue to scroll it does go away but then you need to scroll back to where the lines started, its hard to explain, i have taken 1 photo of the problem but will take more photos as i can, i really enjoy how Firefox runs on my computer, it has always been the best browser for my needs. I did recently buy a new desktop, but it did it then also, so i removed it and tried running explorer and Google and i just don't like them, so i am hoping we can get this fixed.

    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    If there is a problem with scrolling on web pages then try to disable smooth scrolling.
    *Tools > Options > Advanced > General: Browsing: "Use smooth scrolling"

  • My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help.

    My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.

    By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
    If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
    I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position!

  • Why does my photoshop keep giving black and white lines when I use my lasso tool?

    why does my photoshop keep giving black and white lines when I use my lasso tool? It has never done this before last night. It filles the Whole lasso seleted box with (what it almost looks like) black and white caution lines. then when I go to zoom out, my zoom option starts to mess up where you cant click and move your mouse to zoom in/out with ease but where you have to click to zoom out (many times).
    Can ANYONE help me?

    I am using CS5, WIndows 7, I am not sure how to tell if my drivers are up to, and I am more than happy to screen shot it.

  • Black and White monitor adaptor for connection to a G3 Blue and White?

    Hi, I have a Blue and White G3 Power mac and I also have a black and white G4 with a matching flat screen. Is there an adaptor available which allows me to connect my blue and white G3 to my black and white screen?

    If I make every assumption possible, I think you may be asking if you can use a white-with-gray Apple 17" flat panel display, which has only a digital video connector, in a stock Blue & White G3.
    There are two issues:
    1) The connector on the stock card does not mate with the connector on the display, and there is no cheap fix available.
    2) the display gets its power off the connector, and the Blue & White does not have a way or providing that power.
    Both can be solved together by using the Dr. Bott VGA-tor. But at US$300, it would be cheaper to buy a new display.
    http://www.drbott.com/prod/db.lasso?code=0151-VGAT
    The second approach requires two steps. First, upgrade your Video card to one that provides the Apple DVI connector. The use the Dr. Bott DVI-ator (US$95) to supply the external power:
    http://www.drbott.com/prod/db.lasso?code=0111-DVAD

  • I installed Mountain Lion and now some times when I start my mac it look with a black screen and white text. I'm really worry about it, can somebody help me?

    I installed Mountain Lion in my IMac and now, some times, when I start up my mac it looks with a black screen and white text. I'm really worry about it, can somebody help me?

    Don't worry, this is probably just Verbose Mode. It's perfectly harmless.  If you're not specifically invoking it, than it's probably down to an unwanted setting in NVRAM.  See this article on resetting NVRAM if it continues to bother you.

Maybe you are looking for