Black border on edge animation since V28

Hello,
Since the V28 update, I have a black border on block playing into an HTML5 animation wich run well before.
I have changed my folio compatibility with V28 only.
I intent to change the color or width on Edge Animate, but nothing done.
Do you have a similar problem ?
Thanks a lot.

Similar Messages

How can I print with black border around edge of image?

I'd like to add a black border around the edge of certain images I'm printing. I know it's fairly trivial in Lightroom, but I can't see where this option is in Aperture. Is this lacking in Aperture, or am I just missing it? Many thanks.
PS -- I'm aware there are some plug-ins that claim to do this, so if Aperture can't do this, please feel free to chime in with comments on the best plug-in for this task.

Rich Hayhurst wrote:
Here's what you need:
http://www.apple.com/downloads/macosx/aperture/apertureborderfx.html
Aperture BorderFX 1.1
Thanks, Rich. That's a good plug-in, and does cover what I need (with lots of other features, too). The problem, though, is it requires an export of the image, which I then have to either print from another application, or reimport to Aperture to print. I was hoping to find something that will either just apply the border to the print job, or that would serve as more of an Edit With . . . type of plug-in than an Export plug-in, so I can keep everything in one place. Thanks again.
Message was edited by: jeffd55

Black line arround edge animation on ios 7 devices

Hello, we saw that there is a black line arround Adobe edge animation on ios 7 devices if you use the landscape mode. Could anybody help us?
Here is one of our sites http://www.dr-rieden.de

There are only a couple of hundred of these threads already so not sure how searching wouldn't have located any of them.
Plus, we are all users just like you so send this info to Apple: www.apple.com/feedback

Can't get rid of a scollbar with my edge animation on Firefox

hi, am using edge 2.01 with my mac. i am working on a site for   http://www.twosons.com/gallery.html   i have a piece of edge animation on the gallery page which reads DIRECTORS REEL 310.200.1400 right underneath the video buttons. on safari it works perfectly. on firefox however i have a scrollbar appearing. i've checked the animation and it is 360wide X130 height and scripted it to be responsive.
any idea on how i can lose this scrollbar on Firefox. i am already using
.throwOn {
          position: absolute;
   background-color: rgba(0,0,0,.0);
          display:block;
          margin-top: 400px;
          height: 65px;
          /*border-top: 15px solid rgba(255,255,255,.3);
          border-bottom: 15px solid rgba(255,255,255,.3);*/
          margin-left: 170px;
          overflow: hidden;
in my css. any other ideas?
[email protected]

Reboot the device.
Shut down the device by holding the sleep/wake button and the home button at the same time.
Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power off slider appears. If it does, just keep holding it.
Wait until the white Apple logo appears.
When this happens, you can let go - the iPhone is rebooting.

I'm trying to place my edge animation in dps but I can't swipe over it to take me to the next page?

Hi, could anyone help with this?
I'm using an edge animation on the Samsung Galaxy and it won't allow me to swipe over to go to the next page. Does anyone have a solution to this, or can this not be done? Please advise.
Thanks

Hey Ross,
Another user had the same problem and came up with this workaround:
With regards to using it in DPS, it's not an ideal solution but I imported it as a web overlay rather than an html article and made it smaller than full page so there is a border around the edge on which the user can swipe to turn the page and tap to see menu options.
This was taken from this thread:
http://forums.adobe.com/message/5163039#5163039
Here are some other threads that might help you out:
Looks like you asked the same Q on this thread:
http://forums.adobe.com/message/4877470
http://forums.adobe.com/message/4574872

Edge animation works in browser preview from edge and muse but not in chrome when published

I have an Edge animation that worked fine in Chrome, Safari and IE.
The last time I published my Muse site (To BC) again (since update to CC2014) it no longer worked in Chrome!
Preview in browser (Chrome) from edge works, preview in browser (Chrome) from Muse works, publish and it doesn't work in Chrome (but does in Safari and IE).
Have been trawling for possibilities but I'm not that web techy! Any help would be appreciated

I don't remember specifically what fixed it at all as I'd done all of the following:
Removed Muse and Edge and prefs
Updated Muse and Edge
trashed cache in Chrome
copied the contents of the Edge project / stage into a new project and saved as cc2014 version
re-published the whole site from Muse
After many attempts it started working again but I can't say that it was one thing in particular - sorry about that.

How can I automatically crop a photo based on its content (a black border)?

I scanned hundred of negatives.
The scanner produced .jpg files. Most of the scanned images show the negatives holder to one side as a black border. The black border is thicker or thinner depending on the photo.
Please see pictures attached.
Is there a way to automate the detection of such a border and remove it by cropping the photo? Ideally I would like the processing to only remove the thickness that is required to keep the photo unaltered as much as possible.
I have Photoshop 12 and I know about Actions. I just don't know how to tell the engine to only crop if it is required, and by how much.
This could save me days of manual work. Thankyou.
Environment Information:
· I am running Photoshop 12.1 *64 bit
· Windows 7 Professional 64 bit
· Amount of installed RAM: 6GB
·       Scanner: Canon CanoScan 8800F
· Amount of free disk space:
            C:\ - OS and Software disk - Total size:139GB showing 20GB free
            G:\ - Data disk - Total size:1.81 TB showing 437GB free
· Make/Model of Video Card: NVIDIA GeForce 9600 GT

Thank you miss marple for your Image>Canvas Size... suggestion. I used it to implement a semi automated process.
I programmed a couple of actions:
- one to trim all sides by 7 pixels
- one to trim the top side by 7 pixles
Then I assigned a shortcut key to each action.
Since I have to open each photo individually anyway to remove larger scratches (see my other post), it is easy to hit a couple of keyboard keys to trigger the relevant 'border removal' action.
The main thing is that in 95% of cases I don't have to use the mouse to fix the borders, but I use keyboard keys only. It is a real time saver.

Black border around games

When I installed my games the game stretched to the edge of the screen.
Today I tried to run a new game and now all my games have a thick black border around them and the game is small in the middle of the screen. What happened? How do I fix this?
Only games have this problem.

I am a newbie here and just wanna say Hi to everyone. I am Crystal from Louisiana, US.
free photoshop tutorials

Black border around my mouse pointer

Since a few days, I have a thick black border around my mouse pointer, always following the movement of the pointer. How can I bring this away?
Thanks for help
Ueli

Welcome to Discussions - you need to go to System Prefs>Universal Access>Zoom, turn it OFF and make sure, that under Zoom options "show preview rectangle" is UNchecked.
Please post back and tell us if this works,
Miriam

Black Border and Having to "Double-Tap" on apps

I just got a new iPod, and I noticed that you have to tap a little harder than the 4th gen. I figured I would get used to it, but sometimes it doesn't even recognize me tapping the screen. I also noticed for these two apps: Battlefield Bad Company 2 and Call of Duty Black Ops Zombies, that there is a black border around the app and I have to double tap the right of the screen to hold the shoot button down.

You may have the accessibility VoiceOver feature or another one turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off and any other ones off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How do I remove the black border from around my videos?

I have PE7 on my Dell laptop with Windows 7. I've been editing videos on it probably since January. I just never thought anything of the black border, but recently it's really been bugging me. I tried Googling some answers, but all I found was to switch your camera to 16:9 Widescreen. My JVC Everio GZ-MG555U was already set to that setting. I'm just frustrated & I want to get rid of this border. If anyone knows the answer to this problem, please let me know. I need help!

makaylaamae
Thanks for staying with the troubleshooting. I will stay with this as long as it takes to get the project to a successful conclusion. Let us work through this step by step.
1. The readout that you give for your JVC video file is consistent with what those .mod widescreen files have been reading out as, that is,
720 x 480 with a pixel aspect ratio of 0.9091 (standard 4:3) rather than 720 x 480 with a pixel aspect ratio of 1.2121 (widescreen 16:9).
2. Premiere Elements 7. Start a new project with the project preset of NTSC DV Widescreen.
3. With Get Media/Files and Folders import your video clip into the project and drag it to the Timeline.
4. Go to Interpret Footage and, in the Interpret Footage dialog, dot the Conform to: and change the Pixel Aspect Ratio to
D1/DV NTSC Widescreen 16:9 (1.2).
5. Right click the Monitor, select Magnification, and make sure that that the setting is "Fit". Now look at the Edit Mode Monitor space. Is the area designated for the video display filled? No black borders? If so, continue. If not, you are going to scale the video to make the fill. It should not take much scaling for this if needed.
a. Select your video on the Timeline
b. Open Properties/Motion Panel to reveal Scale. Use the Scale slider to zoom in to fill the monitor space to the minimal degree to achieve that purpose, that is, getting rid of any unfilled space (black borders).
6.Then export that Timeline to a NTSC DV AVI widescreen file, saving it to the computer desktop.
Use Share/Computer/DV AVI with Presets: DV NTSC Widescreen
Check out how your NTSC DV AVI widescreen plays back on Windows Media Player. Nevertheless, continue on....
7. Go to the YouTube web site and upload your DV NTSC Widescreen there. And, let us know the results.
We can talk about the upload of your Premiere Elements 7 Timeline with its mod widescreen to YouTube from within Premiere Elements 7 Share/Online/YouTube next if necessary. If you have any problems along the way, stop, let us know the details, and we will work out the problem before continuing with the next steps.
Thanks.
ATR

Edge animations don't work properly in DPS.

I've recently update CC to the latest 2014 version and since then Edge animations don't work properly in DPS (struggle to load and play). Can anyone help?

Hi Bob,
What real details do you need? I create a digital magazine using DPS with the occasional Edge oam file inserted to lift a couple of the openers. However recently, they either stutter on loading, don't load or crash the viewer/ipad. I test them in Content viewer.
Thanks
Mat

I am a new using Adobe products, and I am creating an Animation using Edge Animation.....

Hi guys.
As I said, I am new working with Adobe products, like Dw, and now I am creating an animation using Edge Animation.
Actually, I am creating a carrousel with different pictures representing three different apps being displayed from different devices, moving them and creating a simulated
movement for each one, based on the functionality, that action should be activated by a button (i.e.) titled "Inventory", the action to execute is to move
the three related screens ( Desktop, Ipad and Iphone ) from the original position to the middle screen, but at the same time, and this is what I need to know,
If there is another set of screens for a different application, how to move those back to the original position, before moving
the selected one, "Inventory". I tried to use a duplicated transition and inverting, it works, but it doesn't stop waiting for a new action, and how to combine
that movement back with the selected app-transition?
I put two screenshots with the stage and the original position for all of them. I have not created the buttons yet. I imagine I should use some kind
of conditional statements to execute the action sending back those elements located in the middle of screen, because were selected before,
and then execute to animation to move the selected app.
I would appreciate your help on this matter.
Thanks.
Gustavo Hevia
original Position.
After the First animation for Inventory App.

No answers, Ok.
I will try to give you more information about I want to do.
I am a Filemaker Developer, and I started creating my webpage, and one of thing I would like to do is this
animation and put it on my website.
What I want is to simulate a carrousel of options to show the selected application using the three buttons,
Now, I put the three buttons and each one of them is moving the three corresponding applications, that's fine.
But the issue I have :
I am using Mouseover and Mouseout to show a different color and size of the buttons, and to execute the
corresponding animation.
For each event I created different labels : Inventory_hover ; Inventory_mouseover ; Inventory_Animation and
Inventory_Animation_Reverse and so on.
Testing that
After I selected one of them, and it ended moving the three pictures to the center of the screen, and then I
leave, the three screens moved to the original position, which is not a bad idea, but I want to control that
moving.
So, what I want as a summary is :
1) to control that back movement. I was trying to figure out how to add some code inside the Animation code, and
just before execute that animation, check if there is another application selected before, and then move that
set of pictures back to the original position, since I have only three applications pictures, and only one can move
at the time, the checking "If Statements" would be for two others conditions.
2) That should be done only when one of the buttons is clicked, and not when the mouse leaves the buttons like it
is happening now.
I attached a zip file with my EA files.
Thank you in advance, Any help would be really appreciated.

Black border when exporting a site in Fireworks

Strange problem with Adobe Fireworks CS3 when exporting to html - added a black border, edging around the site, ~ 3 mm.
When viewed in Dreamweaver shows the following:
Question: how to remove the border?

It is just as I said, you need to set the margin and padding to 0 :-)
In your code find: (line 8)
<style type="text/css">td img {display: block;}</style>
and replace it with the following:
<style type="text/css">
body {margin: 0; padding: 0;}
td img {display: block;}
</style>
Note: It is never a good idea to export html code from a graphics program. You should export individual slices and then build the site in Dreamweaver,. At the moment, the whole webpage is make up of graphics - this is not the way to build a page, particularly if you want the pages found in Search Engines.
Here is a good tutorial teaching how to take a Fireworks design into Dreamweaver:
TAKING FIREWORKS COMP TO DREAMWEAVER:
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
If you have further questions that relate to coding of the website, you are best to ask your questions in the Dreamweaver Forum:
http://forums.adobe.com/community/dreamweaver/dreamweaver_general.
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au

Looking for Edge animator

Looking for Edge animator to collaborate on interactive version of map I'm designing in Illustrator. Requirements include zoom in and text rollovers on elements in map. Contact [email protected] with samples.

Hi,
I'm alwase available for freelance work, I'm working with Edge Animate since the first version and founded the community Edgehero for it.
Made Edgehero.js and worked on alot of advanced projects already.
Feel free to contact me and check out the rest of the Edgehero crew : http://www.edgehero.com/about.html
- Rob Boerman
Edgehero.com

Black border on edge animation since V28

Similar Messages

Maybe you are looking for