Black box for Rating Stars

This is annoying to say the least.
Since iTunes 8.0 there is a black rectangle covering the stars in the ratings information when viewing the details of a song or playlist. The rating in the main browsing window are fine as well as when I right or Control click on a song. Only in the information window. With the rectangle up, I can click the Stars locations to change a rating I just can not see what I have picked. It dose not happen all the time, and I have not seen a pattern to what causes it to happen. Once it happens, I will have to restart my computer to clear the fault. Restarting iTunes only will not help. As it is a glitch in a shared property window I am guessing it could be memory or video driver related related.
I have read through a simular posting http://discussions.apple.com/thread.jspa?messageID=7947881&#7947881 that did not help. So I will share that I have an AGP ATI Radeon video card with the current drivers from AMD/ATI and I have even gone as far as to reinstall the video drivers and iTunes.
Ideas? Anyone else notice this?
Message was edited by: Brian Hanlin

So I finally upgraded to 8.0 as well, and I'm now up to repairing Quicktime four times in the last 48 hours. The repair works for a short time, but then it goes right back to the black box. I have significantly more songs than I do have space on my ipod, and the star rating is the only way to filter the songs that I actually want to listen to (on my ipod) versus the the songs that I already own.
Is there any other fix for this - surely more than three people have experienced this issue? How is it that I've yet to see a benefit from upgrading to new versions of itunes? I think 3.x is where I began losing confidence. The post holiday lull would be a great time for apple developers release a patch for this.... I'm just saying...

Similar Messages

Poor black box for multimedia widget with video

Hi,
When adding a multimedia widget to play video in my book, I can play the video properly however I cannot make the presentation nice.
1) I've a black box (instead of the first image of the video) and cannot select the slider in the inspector to select the first picture to show before video is started. It does not move.
2) I cannot select whether video is full screen or in a smaller box (Full Screen checkbox is not selected and greyed out)
3) The black box itself is fixed size and too small; I would like to extend it a bit.
4) Repeat and Controls are also greyed out
5) I cannot center the black box or put it where I want in the page.
Any point where you could help?
Thanks in advance.

Have you confirmed your process w/this tech note?
iBooks Author: Add video to your iBooks - Support - Apple
And this guide?
Publishing With iBooks Author
http://shop.oreilly.com/product/0636920025597.do

Seeing black boxes instead of hyperlinks using Adobe Reader for Android except in Reflow Mode

I am using Adobe Reader for Android (on an Android table) to view some PDF reports that have hyperlinks in them. In Reflow Mode, I can see the hyperlinks as blue underlined text, as I would expect. In Continuous or Single Page mode, these hyperlinks are displayed as black boxes. The hyperlinks still work if you click on the black box. Can someone tell me what is causing this and how I can fix it?

I am using Adobe Reader for Android (on an Android table) to view some PDF reports that have hyperlinks in them. In Reflow Mode, I can see the hyperlinks as blue underlined text, as I would expect. In Continuous or Single Page mode, these hyperlinks are displayed as black boxes. The hyperlinks still work if you click on the black box. Can someone tell me what is causing this and how I can fix it?

Trying to update apple tv (small black box). how do i do update? can't find system settings. i see system preferences no mac pro. does apple tv need to be plugged into hdtv for the update or PC. If PC, how?

trying to update apple tv (small black box). how do i do update? can't find system settings. i see system preferences no mac pro. does apple tv need to be plugged into hdtv for the update or PC. If PC, how?

You have to do it on the Apple TV itself while it's plugged into a TV so that you can see its screen.
I quote
How to update software on your Apple TV (2nd and 3rd generation)
Learn how to update the software on your Apple TV (2nd and 3rd generation). It's always a good idea to have the latest software on your Apple TV.
Update your software
Select Settings > General > Update Software. Apple TV checks for an available update; if one is available, a download message should appear.
Click Download and Install to start the download process.
Do not disconnect your Apple TV during the update process. The Apple TV status light may flash slowly during the update and restart process. This is expected behavior.

I just upgraded to iPhoto '11. When it was finished many pictures do not appear. I have a black box but the information for the picture is still there. Some are raw and some are jpeg. Also lost all albums. Can anyone offer assistance?

I just upgraded to iPhoto '11. When it was finished many pictures do not appear. I have a black box but the information for the picture is still there. Some are raw and some are jpeg. Also lost all albums. Can anyone offer assistance? Using iOS 10.7.5

Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Images not Displaying (Showing as a black box) in Excel 2011 for Mac

I'm using Office 2011 for Mac, on a 2013 iMac with Mavericks (10.9.4).
I have a .jpg image I'm trying to insert in the footer, and it is only showing as a black box. I even tried saving as a .pdf, and it still shows as a black box. How can I fix so that it shows the image?
Thanks!

Hi,
This forum is to discuss problems of MS Office development in the Windows OS such as VBA, VSTO, Apps for Office .etc. But I think your question is related to the end-user feature of MS Office:Mac. So I suggest you posting your issue in Office for
Mac support for more efficient responses.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Grey vs Black Rating Stars (in iTunes) [screenshot]

http://img33.imageshack.us/img33/6969/screenshot20120221at110.png
MacBook Pro (early 2011)
Mac OS X 10.7.3
iTunes 10.5.3
Hello!
Here on the screenshot, you could see grey and black rating stars in iTunes. If I click on the grey star rating to give it a new or the same rating the stars become black.
So my questions are:
1. What do they mean?
2. How are they different?
3. What could be causing it?
4. Anything else I need to know about this?
Thanks,
Yervand

https://discussions.apple.com/thread/2498439?start=0&tstart=0

Interactive Rating Stars for XSLTListView Blog Home Page

Hi All, using the OOTB blog site template, I'd like to modify the OOTB List View Web Part (using SharePoint Designer) on the home page of the blog site to also include interactive rating stars next to each entry's title. So far I've been able to get the
stars to show up but I haven't been able to figure out how to make it clickable/interactive. Any ideas/suggestions? Thanks!http://www.henryong.com

Hi Henry,
Please follow the steps given below
1. Create a custom blog.xsl file and dump the below code in the file. Upload the blog.xsl file to a style library.
<xsl:stylesheet xmlns:x="http://www.w3.org/2001/XMLSchema" xmlns:d="http://schemas.microsoft.com/sharepoint/dsp" version="1.0" exclude-result-prefixes="xsl msxsl ddwrt" xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime" xmlns:asp="http://schemas.microsoft.com/ASPNET/20" xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:SharePoint="Microsoft.SharePoint.WebControls" xmlns:ddwrt2="urn:frontpage:internal" xmlns:o="urn:schemas-microsoft-com:office:office" ddwrt:ghost="show_all">
<xsl:include href="/_layouts/xsl/blog.xsl"/>
<xsl:include href="/_layouts/xsl/internal.xsl"/>
<xsl:param name="AllRows" select="/dsQueryResponse/Rows/Row[$EntityName = '' or (position() >= $FirstRow and position() <= $LastRow)]"/>
<xsl:param name="dvt_apos">'</xsl:param>
<xsl:template match="/" ddwrt:ghost="hide">
<xsl:choose>
<xsl:when test="$RenderCTXOnly='True'">
<xsl:call-template name="CTXGeneration"/>
</xsl:when>
<xsl:when test="($ManualRefresh = 'True')">
<xsl:call-template name="AjaxWrapper" />
</xsl:when>
<xsl:otherwise>
<xsl:apply-templates mode="RootTemplate" select="$XmlDefinition"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="View_DefaultSummary_RootTemplate" mode="RootTemplate" match="View[@BaseViewID='0']" ddwrt:dvt_mode="root" ddwrt:ghost="hide">
<xsl:apply-templates select="." mode="full" />
</xsl:template>
<xsl:template match="View[@BaseViewID='0' and List/@TemplateType='301']" mode="full" ddwrt:ghost="hide">
<xsl:apply-templates select="." mode="RenderView" />
<xsl:apply-templates mode="footer" select="." />
</xsl:template>
<xsl:template match="View" mode="RenderView" ddwrt:ghost="hide">
<xsl:variable name="ViewStyleID">
<xsl:value-of select="ViewStyle/@ID"/>
</xsl:variable>
<xsl:variable name="HasExtraColumn" select="$TabularView='1' and $MasterVersion=4 and ($ViewStyleID = '' or $ViewStyleID = '17')"/>
<xsl:if test="Aggregations[not(@Value='Off')]/FieldRef">
<tr>
<xsl:if test="$HasExtraColumn">
<td/>
</xsl:if>
<xsl:if test="$InlineEdit">
<td width="1%"/>
</xsl:if >
<xsl:apply-templates mode="aggregate" select="ViewFields/FieldRef[not(@Explicit='TRUE')]">
<xsl:with-param name="Rows" select="$AllRows"/>
<xsl:with-param name="GroupLevel" select="0"/>
</xsl:apply-templates>
</tr>
</xsl:if>
<xsl:variable name="Fields" select="ViewFields/FieldRef[not(@Explicit='TRUE')]"/>
<xsl:variable name="Groups" select="Query/GroupBy/FieldRef"/>
<xsl:variable name="Collapse" select="Query/GroupBy[@Collapse='TRUE']"/>
<xsl:variable name="GroupCount" select="count($Groups)"/>
<xsl:for-each select="$AllRows">
<xsl:variable name="thisNode" select="."/>
<xsl:if test="$GroupCount > 0">
<xsl:call-template name="GroupTemplate">
<xsl:with-param name="Groups" select="$Groups"/>
<xsl:with-param name="Collapse" select="$Collapse"/>
<xsl:with-param name="HasExtraColumn" select="$HasExtraColumn"/>
</xsl:call-template>
</xsl:if>
<xsl:if test="not(not($NoAJAX) and not($InlineEdit) and $Collapse and $GroupCount > 0)">
<xsl:apply-templates mode="Item" select=".">
<xsl:with-param name="Fields" select="$Fields"/>
<xsl:with-param name="Collapse" select="$Collapse"/>
<xsl:with-param name="Position" select="position()"/>
<xsl:with-param name="Last" select="last()"/>
</xsl:apply-templates>
</xsl:if>
</xsl:for-each>
<xsl:if test="$InlineEdit and not($IsDocLib) and $ListRight_AddListItems = '1'">
<xsl:call-template name="rowinsert">
<xsl:with-param name="Fields" select="$Fields"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
<xsl:template mode="Item" match="Row[../../@TemplateType='301' and (../../@BaseViewID='0' or ../../@BaseViewID='7' or ../../@BaseViewID='8' or ../../@BaseViewID='9')]" ddwrt:ghost="" xmlns:ddwrt2="urn:frontpage:internal">
<xsl:param name="Fields" select="."/>
<xsl:param name="Collapse" select="."/>
<xsl:param name="Position" select="1"/>
<xsl:param name="Last" select="1"/>
<xsl:variable name="ShowBody">
<xsl:if test="../../@BaseViewID='0' or ../../@BaseViewID='7'">1</xsl:if>
</xsl:variable>
<xsl:variable name="ShowTopDate">
<xsl:if test="../../@BaseViewID='0' or ../../@BaseViewID='7'">1</xsl:if>
</xsl:variable>
<xsl:variable name="ShowDrafts">
<xsl:if test="../../@BaseViewID='7'">1</xsl:if>
</xsl:variable>
<xsl:variable name="thisNode" select="."/>
<xsl:if test="$ShowDrafts=1 or $thisNode/@_ModerationStatus. = 0">
<table>
<tr class="ms-blogpostdatecol" valign="top">
<td class= "ms-leftblogdate" style="width: 93px">
<div id="PostDateTopBox{generate-id()}" class="ms-postcalendardateboxtop">
</div>
<xsl:if test="$MasterVersion = 4">
<div id="PostDateBottomBox{generate-id()}" class="ms-postcalendardateboxbottom" style="overflow-x:hidden">
<div>
<xsl:value-of select="$thisNode/@PublishedDate.MonthDayOnly" disable-output-escaping="yes" />
</div>
</div>
</xsl:if>
<xsl:if test="$MasterVersion != 4">
<div id="PostDateBottomBox" class="ms-postcalendardateboxbottom" style="overflow-x:hidden;font-size:0.8em">
<div>
<xsl:value-of select="$thisNode/@PublishedDate.MonthDayOnly" disable-output-escaping="yes" />
</div>
</div>
</xsl:if>
</td>
<td class = "ms-rightblogpost">
<table dir="None" cellspacing="0" cellpadding="0" width="100%" border="0">
<tbody>
<tr>
<td class="ms-PostTitle">
<a href="{$HttpVDir}/{$thisNode/../@resource.wss.lists_Folder}/{$thisNode/../@resource.wss.blogpost_Folder}/Post.aspx?ID={$thisNode/@ID}">
<xsl:apply-templates select="$Fields[@Name='Title']" mode="PrintField">
<xsl:with-param name="thisNode" select="$thisNode"/>
<xsl:with-param name="Position" select="$Position"/>
</xsl:apply-templates>
</a>
</td>
<xsl:if test="../../@BaseViewID='7'">
<xsl:if test="($thisNode/../@value.listpermission.EditListItems = '1' and (($thisNode/../@value.listpermission.ManageLists = '1') or ($XmlDefinition/List/@WriteSecurity = '2' and $thisNode/@Author.id = $Userid) or ($XmlDefinition/List/@WriteSecurity != '2')))">
<td align="right" class="ms-blogedit">
<a href="javascript:" onclick="javascript:ShowPopupDialog('{$HttpVDir}/{$thisNode/../@resource.wss.lists_Folder}/{$thisNode/../@resource.wss.blogpost_Folder}/EditPost.aspx?ID={$thisNode/@ID}&Source={$HttpVDir}%2Fdefault.aspx');">
<xsl:value-of select="'Edit'" />
</a>
</td>
</xsl:if>
</xsl:if>
</tr>
</tbody>
</table>
<div class="ms-PostFooter">
<xsl:for-each select="$Fields">
<xsl:if test="@Name!='Title' and @Type!='Note' and not(@Name='PostCategory' and $thisNode/@PostCategory='')">
<xsl:choose>
<xsl:when test="@Name='Author'">
<span class="ms-postfootercolor">
<xsl:value-of select="'by '"/>
</span>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="$thisNode/@Author.span" disable-output-escaping="yes" />
</xsl:when>
<xsl:when test="@Name='PublishedDate'">
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;&nbsp;</xsl:text>
<span class="ms-postfootercolor">
<xsl:value-of select="'on'"/>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="$thisNode/@PublishedDate" />
</span>
</xsl:when>
</xsl:choose>
</xsl:if>
</xsl:for-each>
<div>
<xsl:for-each select="$Fields">
<xsl:if test="@Name='PostCategory' and not ($thisNode/@PostCategory='')">
<xsl:value-of select="'Category'" />
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">:&nbsp;</xsl:text>
<xsl:apply-templates select="$Fields[@Name='CategoryWithLink']" mode="Computed_body">
<xsl:with-param name="thisNode" select="$thisNode"/>
</xsl:apply-templates>
</xsl:if>
</xsl:for-each>
</div>
</div>
<xsl:if test="$ShowBody=1">
<div class="ms-PostBody">
<div>
<xsl:apply-templates select="$Fields[@Name='Body']" mode="PrintField">
<xsl:with-param name="thisNode" select="$thisNode"/>
<xsl:with-param name="Position" select="$Position"/>
</xsl:apply-templates>
</div>
</div>
</xsl:if>
<div class="ms-PostFooter">
<xsl:for-each select="$Fields">
<xsl:if test="@Name ='Permalink' or @Name ='EmailPostLink' or @Name ='NumCommentsWithLink'">
<xsl:choose>
<xsl:when test="@Name='Permalink' or @Name='EmailPostLink' or @Name='NumCommentsWithLink'">
<xsl:apply-templates select="." mode="PrintFieldWithDisplayFormLink">
<xsl:with-param name="thisNode" select="$thisNode"/>
<xsl:with-param name="Position" select="$Position"/>
</xsl:apply-templates>
<xsl:if test="@Name='Permalink' or @Name='EmailPostLink'">
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;|&nbsp;</xsl:text>
</xsl:if>
</xsl:when>
<xsl:when test="$thisNode/@*[name()=current()/@Name]!=''">
<xsl:apply-templates select="." mode="PrintFieldWithDisplayFormLink">
<xsl:with-param name="thisNode" select="$thisNode"/>
<xsl:with-param name="Position" select="$Position"/>
</xsl:apply-templates>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;|&nbsp;</xsl:text>
</xsl:when>
</xsl:choose>
</xsl:if>
</xsl:for-each>
</div>

<div class="ms-PostFooter">
<xsl:for-each select="$Fields">
<xsl:if test="@Name ='AverageRating'">
<xsl:choose>
<xsl:when test="@Name='AverageRating'">
<xsl:apply-templates select="." mode="PrintFieldWithDisplayFormLink">
<xsl:with-param name="thisNode" select="$thisNode"/>
<xsl:with-param name="Position" select="$Position"/>
</xsl:apply-templates>
</xsl:when>
</xsl:choose>
</xsl:if>
</xsl:for-each>
</div>

</td>
</tr>
</table>
</xsl:if>
</xsl:template>
<xsl:template name="FieldRef_Text_body.Title" ddwrt:dvt_mode="body" match ="FieldRef[@Name='Title']" mode="Text_body" ddwrt:ghost="hide">
<xsl:param name="thisNode" select="."/>
<xsl:choose>
<xsl:when test="@AutoHyperLink='TRUE'">
<xsl:value-of select="$thisNode/@*[name()=current()/@Name]" disable-output-escaping ="yes"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$thisNode/@*[name()=current()/@Name]"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="FieldRef_Note_body.Body" ddwrt:dvt_mode="body" match="FieldRef[@Name='Body']" mode="Note_body" ddwrt:ghost="hide">
<xsl:param name="thisNode" select="."/>
<div dir="{@Direction}" class="ms-rtestate-field">
<xsl:value-of select="$thisNode/@*[name()=current()/@Name]" disable-output-escaping="yes"/>
</div>
</xsl:template>
<xsl:template name="FieldRef_Blog_Permalink_Computed_Body.Permalink" match="FieldRef[(@ID='a194bd80-24e6-e71b-b235-3a283b9f1e71') and @Name='Permalink']" ddwrt:dvt_mode="body" mode="Computed_body" ddwrt:ghost="hide">
<xsl:param name="thisNode" select="."/>
<span style="vertical-align:middle">
<span style="height:16px;width:16px;position:relative;display:inline-block;overflow:hidden;" class="s4-clust">
<a href="{$HttpVDir}/{$thisNode/../@resource.wss.lists_Folder}/{$thisNode/../@resource.wss.blogpost_Folder}/Post.aspx?ID={$thisNode/@ID}" style="height:16px;width:16px;display:inline-block;" >
<img src="/_layouts/images/fgimg.png" alt="{$thisNode/../@resource.wss.posts_permlink_alt}" style="left:-0px !important;top:-412px !important;position:absolute;" title="{$thisNode/../@resource.wss.posts_permlink_alt}" class="imglink" longDesc="{$thisNode/../@resource.wss.posts_permlink_alt}" />
</a>
</span>
</span>
</xsl:template>
<xsl:template name="FieldRef_Blog_EmailPostLink_Computed_Body.EmailPostLink" match="FieldRef[(@ID='1c216b4a-13a6-cd5c-b37b-3776b29ff92e') and @Name='EmailPostLink']" ddwrt:dvt_mode="body" mode="Computed_body" ddwrt:ghost="hide">
<xsl:param name="thisNode" select="."/>
<span style="vertical-align:middle">
<span style="height:16px;width:16px;position:relative;display:inline-block;overflow:hidden;" class="s4-clust">
<a href="javascript:navigateMailToLink('{$HttpVDir}%2F{$thisNode/../@resource.wss.lists_Folder}%2F{$thisNode/../@resource.wss.blogpost_Folder}%2FPost.aspx?ID%3D{$thisNode/@ID}')" style="height:16px;width:16px;display:inline-block;" >
<img src="/_layouts/images/fgimg.png" alt="{$thisNode/../@resource.wss.posts_emailpostlink_alt}" style="left:-0px !important;top:-267px !important;position:absolute;" title="{$thisNode/../@resource.wss.posts_emailpostlink_alt}" class="imglink" longDesc ="{$thisNode/../@resource.wss.posts_emailpostlink_alt}" />
</a>
</span>
</span>
</xsl:template>
<xsl:template name="FieldRef_Blog_NumCommentsWithLink_Computed_Body.NumCommentsWithLink" match="FieldRef[(@ID='65746b4a-13a6-a72c-b815-3a96b29f1f9e') and @Name='NumCommentsWithLink']" ddwrt:dvt_mode="body" mode="Computed_body" ddwrt:ghost="hide">
<xsl:param name="thisNode" select="."/>
<span style="vertical-align:middle">
<span style="height:16px;width:16px;position:relative;display:inline-block;overflow:hidden;" class="s4-clust">
<a href="{$HttpVDir}/{$thisNode/../@resource.wss.lists_Folder}/{$thisNode/../@resource.wss.blogpost_Folder}/Post.aspx?ID={$thisNode/@ID}" style="height:16px;width:16px;display:inline-block;" >
<img src="/_layouts/images/fgimg.png" alt="{$thisNode/../@resource.wss.posts_numcommentswithlink_alt}" style="left:-0px !important;top:-396px !important;position:absolute;" title="{$thisNode/../@resource.wss.posts_numcommentswithlink_alt}" class="imglink" longDesc="{$thisNode/../@resource.wss.posts_numcommentswithlink_alt}" />
</a>
</span>
</span>
<span>
<a href="{$HttpVDir}/{$thisNode/../@resource.wss.lists_Folder}/{$thisNode/../@resource.wss.blogpost_Folder}/Post.aspx?ID={$thisNode/@ID}">
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="$thisNode/@NumComments" />
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="'Comment(s)'"/>
</a>
</span>
</xsl:template>
<xsl:template match="View[List/@TemplateType='301' and (@BaseViewID='0' or @BaseViewID='8' or @BaseViewID='9')]" mode="footer" ddwrt:ghost="hide">
<xsl:call-template name="pagingButtons" />
<xsl:if test="List/@EnableSyndication=1">
<div class="ms-blogrss" id="BlogRSSMain{generate-id()}">
<span style="vertical-align:middle">
<span style="height:16px;width:16px;position:relative;display:inline-block;overflow:hidden;" class="s4-clust">
<a href="{$HttpVDir}/_layouts/listfeed.aspx?List={$List}" style="height:16px;width:16px;display:inline-block;" >
<img src="/_layouts/images/fgimg.png" alt="{$Rows/@resource.wss.blog_rss_link}" style="left:-0px !important;top:-475px !important;position:absolute;" title="{$Rows/@resource.wss.blog_rss_link}" align="absmiddle" />
</a>
</span>
</span>
<a href="{$HttpVDir}/_layouts/listfeed.aspx?List={$List}">
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="'RSS Feed'"/>
</a>
</div>
<script type="text/javascript">
var divBlogRSSNav = document.getElementById("BlogRSSNav");
var divBlogRSSMain = document.getElementById("BlogRSSMain");
if (divBlogRSSNav != null && divBlogRSSMain != null)
divBlogRSSNav.innerHTML = divBlogRSSMain.innerHTML;
divBlogRSSNav.className = "ms-blogrssnav";
divBlogRSSMain.removeNode(true);
</script>
</xsl:if>
<xsl:if test="$EnableAlert">
<div class="ms-blogrss" >
<a href="{$HttpVDir}/_layouts/SubNew.aspx?List={$List}&Source={$HttpVDir}%2Fdefault.aspx" longDesc="{$Rows/@resource.wss.ToolBarMenuItemAlertMe}">
<img src="/_layouts/images/menualert.gif" alt="{$Rows/@resource.wss.ToolBarMenuItemAlertMe}" title="{$Rows/@resource.wss.ToolBarMenuItemAlertMe}" align="absmiddle" height="16px" width="16px"/>
<xsl:text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">&nbsp;</xsl:text>
<xsl:value-of select="'Alert Me'"/>
</a>
</div>
</xsl:if>
</xsl:template>
<xsl:template name="pagingButtons" ddwrt:ghost="hide">
<xsl:choose>
<xsl:when test="$XmlDefinition/List/@TemplateType = 106 and $XmlDefinition/@RecurrenceRowset='TRUE'">
<xsl:if test="$dvt_nextpagedata or $dvt_prevpagedata">
<xsl:call-template name="CalendarExpandedRecurrenceFooter"/>
</xsl:if>
</xsl:when>
<xsl:otherwise>
<xsl:if test="$XmlDefinition/RowLimit[@Paged='TRUE']">
<xsl:call-template name="CommandFooter">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
</xsl:call-template>
</xsl:if>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template name="CommandFooter" ddwrt:ghost="hide">
<xsl:param name="FirstRow" select="1"/>
<xsl:param name="LastRow" select="1"/>
<xsl:param name="dvt_RowCount" select="1"/>
<xsl:if test="$FirstRow > 1 or $dvt_nextpagedata">
<xsl:call-template name="Navigation">
<xsl:with-param name="FirstRow" select="$FirstRow" />
<xsl:with-param name="LastRow" select="$LastRow" />
<xsl:with-param name="dvt_RowCount" select="$dvt_RowCount" />
</xsl:call-template>
</xsl:if>
</xsl:template>
<xsl:template name="Navigation" ddwrt:ghost="hide">
<xsl:param name="FirstRow" select="1"/>
<xsl:param name="LastRow" select="1"/>
<xsl:param name="dvt_RowCount" select="1"/>
<xsl:variable name="LastRowValue">
<xsl:choose>
<xsl:when test="$EntityName = '' or $LastRow < $RowTotalCount">
<xsl:value-of select="$LastRow"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$RowTotalCount"/>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:variable name="NextRow">
<xsl:value-of select="$LastRowValue + 1"/>
</xsl:variable>
<table width="100%" border="0" cellpadding="0" cellspacing="0" class="ms-bottompaging">
<tr>
<td class="ms-bottompagingline1">
<img src="/_layouts/images/blank.gif" width="1" height="1" alt=""/>
</td>
</tr>
<tr>
<td class="ms-bottompagingline2">
<img src="/_layouts/images/blank.gif" width="1" height="1" alt=""/>
</td>
</tr>
<tr>
<td class="ms-vb" id="bottomPagingCell{$WPQ}">
<xsl:if test="not($GroupingRender)">
<xsl:attribute name="align">center</xsl:attribute>
</xsl:if>
<table>
<tr>
<xsl:if test="$dvt_firstrow > 1">
<td>
<a>
<xsl:choose>
<xsl:when test="$dvt_RowCount = 0 and not($NoAJAX)">
<xsl:attribute name="onclick">
javascript:RefreshPageTo(event, "<xsl:value-of select="$PagePath"/>?<xsl:value-of select="$ShowWebPart"/>\u0026<xsl:value-of select='$FieldSortParam'/><xsl:value-of select='$SortQueryString'/>\u0026View=<xsl:value-of select="$View"/>");javascript:return false;
</xsl:attribute>
<xsl:attribute name="href">javascript:</xsl:attribute>
<img src="/_layouts/{$LCID}/images/prev.gif" border="0" alt="{$Rows/@idRewind}" />
<img src="/_layouts/{$LCID}/images/prev.gif" border="0" alt="{$Rows/@idRewind}" />
</xsl:when>
<xsl:otherwise>
<xsl:variable name="RealRowLimit">
<xsl:choose>
<xsl:when test="$XmlDefinition/Query/GroupBy[@Collapse='TRUE']/@GroupLimit">
<xsl:value-of select ="$XmlDefinition/Query/GroupBy[@Collapse='TRUE']/@GroupLimit"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select = "$XmlDefinition/RowLimit"/>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
<xsl:choose>
<xsl:when test="not($NoAJAX)">
<xsl:attribute name="onclick">
javascript:RefreshPageTo(event, "<xsl:value-of select="$PagePath"/>?<xsl:value-of select="$dvt_prevpagedata"/><xsl:value-of select="$ShowWebPart"/>\u0026PageFirstRow=<xsl:value-of select="$FirstRow - $RealRowLimit"/>\u0026<xsl:value-of select='$FieldSortParam'/><xsl:value-of select='$SortQueryString'/>\u0026View=<xsl:value-of select="$View"/>");javascript:return false;
</xsl:attribute>
<xsl:attribute name="href">javascript:</xsl:attribute>
</xsl:when>
<xsl:otherwise>
<xsl:attribute name="href">
javascript: <xsl:call-template name="GenFireServerEvent">
<xsl:with-param name="param" select="concat('dvt_firstrow={',$FirstRow - $XmlDefinition/RowLimit,'};dvt_startposition={',$dvt_prevpagedata,'}')"/>
</xsl:call-template>
</xsl:attribute>
</xsl:otherwise>
</xsl:choose>
<img src="/_layouts/{$LCID}/images/prev.gif" border="0" alt="{$Rows/@idPrevious}" />
</xsl:otherwise>
</xsl:choose>
</a>
</td>
</xsl:if>
<xsl:if test="$FirstRow <= $LastRowValue">
<td class="ms-paging">
<xsl:value-of select="$FirstRow" /> - <xsl:value-of select="$LastRowValue" />
</td>
</xsl:if>
<xsl:if test="$LastRowValue < $dvt_RowCount or string-length($dvt_nextpagedata)!=0">
<td>
<a>
<xsl:choose>
<xsl:when test="not($NoAJAX)">
<xsl:attribute name="onclick">
javascript:RefreshPageTo(event, "<xsl:value-of select="$PagePath"/>?<xsl:value-of select="$dvt_nextpagedata"/><xsl:value-of select="$ShowWebPart"/>\u0026PageFirstRow=<xsl:value-of select="$NextRow"/>\u0026<xsl:value-of select='$FieldSortParam'/><xsl:value-of select='$SortQueryString'/>\u0026View=<xsl:value-of select="$View"/>");javascript:return false;
</xsl:attribute>
<xsl:attribute name="href">javascript:</xsl:attribute>
</xsl:when>
<xsl:otherwise>
<xsl:attribute name="href">
javascript:
<xsl:call-template name="GenFireServerEvent">
<xsl:with-param name="param" select="concat('dvt_firstrow={',$NextRow,'};dvt_startposition={',$dvt_nextpagedata,'}')"/>
</xsl:call-template>
</xsl:attribute>
</xsl:otherwise>
</xsl:choose>
<img src="/_layouts/{$LCID}/images/next.gif" border="0" alt="{$Rows/@tb_nextpage}" />
</a>
</td>
</xsl:if>
</tr>
</table>
</td>
</tr>
<tr>
<td class="ms-bottompagingline3">
<img src="/_layouts/images/blank.gif" width="1" height="1" alt=""/>
</td>
</tr>
</table>
<xsl:if test="not($GroupingRender)">
<script>
var topPagingCell = document.getElementById("topPagingCell<xsl:value-of select='$WPQ'/>");
var bottomPagingCell = document.getElementById("bottomPagingCell<xsl:value-of select='$WPQ'/>");
if (topPagingCell != null && bottomPagingCell != null)
topPagingCell.innerHTML = bottomPagingCell.innerHTML;
</script>
</xsl:if>
</xsl:template>
</xsl:stylesheet>
2. Edit the blog post xslt list view webpart on the home page of blog site and specify the custom xsl path, under Miscellaneous -> XSL Link and click ok.
3. After the page is render it should display like the image given below
http://moss-solutions.blogspot.com/

WHY is there no fix for the dreaded black box installer for me?

I have searched this forum for days and see my issue with either no replies, or the ones with replies do not work.
I have a new PC win7. I am running IE11 and FF34.0.5. So far I hate my new PC.
Anyway, I have tried in both browsers all diff ways of installing from the many hints I have come across and still get the black box that hangs. If I click on it a few times - sometimes - it takes me to the browser page and says "server not found."
BTW, in IE addons, flash is not listed so I cannot enable it like so many hints have said to do. If it was that easy, I would not be here looking for help!
FF also does not have flash listed nor when I look for new addons is it an option!
At this point I am keeping my old pc to do certain things like plays games, etc. This is ridiculous though!
I also see there is no phone number and no tech support outside of this forum, yet we at the mercy of Adobe Flash. This is really not cool.
So I implore you, Adobe, can you please tell us how to fix this???

Hello,
We are aware if the 'black box' issue with the shim installer (downloaded from get.adobe.com/flashplayer), however, this should not be the case with the full installer. The links for the full installers are posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section.
Maria

Compressor2 Preview shows BLACK BOXES on LT & RT for 16:9 vd

My video project was shot on Canon XL2 16:9 Widescreen. I import the QT reference file into Compressor 2 from FCP5, in the Preview window, the Preview shows BLACK BOXES on Left & Right . Is it supposed to be like that in the Preview for a widescreen 16:9 video? If yes, cool. If not, how can I fix it?
Thanks once again,
Zia

Try this:
caveat
And to best understand what is happening, watch this:
How do I choose the right sequence settings?

When i try to use my apple acocunt for the first time i get a prompt to put in my CC info but after i agree to the TOS the ipad only displays a black box no text, ive erased the ipad and still the same thing

When i try to use my apple acocunt for the first time i get a prompt to put in my CC info but after i agree to the TOS the ipad only displays a black box no text, ive erased the ipad and still the same thing

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Do you need a sim card for the iPad 3G and when I try to download something from the app store my screen has a black box appear is that normal and why is this happening?

My app store does not let me download things , when I sghn in a black box appers , also does a iPad 1 3G need a sim card to download apps ?

You posted in the iPod Shuffle forum; it might be best to post in the iPad forum, as I was a bit confused at first. Anyway,
It doesn't need a SIM to download apps if you have Wi-Fi. Can you describe this box a little more, or better yet, screenshot it?
Taking a Screenshot:
Quickly press then release the home and power buttons at the same time.
Get the photo on your computer and upload it here.
If you don't want to do this, can you describe it a little more? When you say "black box," I'm guessing it's an outlined box that appears around any item that you tap on. Is this correct? If so, it sounds like VoiceOver was enabled. See:
Turning VoiceOver On or Off
(Note that I am a representative of the organization for the above link, which is not endorsed by Apple)

HT3180 Uploaded new software update and all I have is a little black box with an incessant flashing white light. I have pushed menu + downarrow on the remote, unplugged for 10 seconds and stiill no change when I plug it in again ! !

Uploaded new software update and all I have is a little black box with an incessant flashing white light. I have pushed menu + downarrow on the remote, unplugged for 10 seconds and stiill no change when I plug it in again ! !

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Command-5 shortcut for 5-star rating photos in iPhoto not working

When I go to 5-star rate a photo in iPhoto using the default Command-5 shortcut, the shortcut no longer works.
The Command-1, Command-2, Command-3, Command-4 shortcuts work for (1-star through to 4-star ratings), but for some reason Command-5 no longer works???
There is nothing wrong with my "5" on my keyboard.
I went to my local Apple Store and spoke to a Genius. He said that there is probably a mistake in the iPhoto code, and that the mistake would only be corrected after someone mentioned to apple the problem.
I would like to find out if there is any way firstly to rectify the problem myself? or alternatively how to get in touch with Apple to let them know there is a problem, so that they can fix it by the next software update.
Thanks
Mac specs:
MacBook 5, 1
Mac OS X (10.6.2)
iPhoto '09 version 8.1.1 (419)

Ty trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
Regards
TD

Document library : rating (stars) feature not showing for folders.

Hi,
Trying to figure out when rating feature will show starts icon for rating folders.
It is showing for individual files but not for folders. Attached is the scree-shot. all names are folder names.

Hi Abhilash,
Please check whether the old library was customized and added some custom folder content types into the old library.
If yes, please try to add the folder content type which was used in the old library into the new library, then create a new folder using the content type, compare the result.
In addition, you maybe need to re-enable rating feature in the new library after you add the content type.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Black box for Rating Stars

Similar Messages

Maybe you are looking for