Black color overlapping blues/greens ?

Hey there. I have problems with colors. There is black overlapping blues/greens as shown on the image. This spiral is done with the same color airbrush style so the more saturated the area is the more black color percent appears. I have installed it 2 weeks ago and it was working well for kinda half that time. Suddenly that problem appeared without any idea why. I have tried reinstalling both graphic drivers and photoshop but doesn't help.
PS ver: 13.0.1
PC: i5, HD7850
OS: Win7

See also:  http://forums.adobe.com/message/5006842
Good news everyone!  The AMD Catalyst 13.2 beta 4 driver finally fixes the problem, if you want to go for the very latest instead of downgrading. 
I've been running the Catalyst 13.2 beta 4 driver for a few days now.  It seems pretty stable.
-Noel

Similar Messages

  • Scanjet G3010 Scans black color with faint green stripe

    When scanning photos the black or other dark colors will have a faint green stripe over a portion of the photo.  The green stripe may actually cover some of the other colors however it is clearly visible on the portions that are black.  I have installed the latest driver for Windows 7 64 bit dated Oct 2012 with no improvement.  This has been a issue as long as I have owned this scanner and I have grown weary of trying to reposition the photos to make the green tint less noticeable.

    Thank you, FXChrome did the trick.

  • FCPX: When applying the keyer to green screen, is there a way to change the resulting color from black to another color (cream, blue, etc)?

    Currently working on a project where I shot various video tributes in front of a green screen.  When using the keyer in FCPX, the resulting image is represented by a black background instead of a green one.  I'd like to change that color to blue, tan or something else so that when I apply a picture in a portion of the background, the remaining background looks fine.  More specifically, I plan to put images over the right shoulder of each person in the video.  The image will only take up about 1/4 of the background and the rest of it currently just looks like a black screen.   Thanks in advance for any advice.

    Tom now I have another follow-up.  So i have the original green screen with the keyer applied which, emptied the background.  Now I've applied a color generator below that in the timeline and it generates a color.  How do I now go back and add the photo in the upper right corner of the clip?  Ultimatly the goal is to have the subject, with the color backdrop and a photo above their right shoulder.

  • Pdf's created in Indesign having problem in "Black" color when it overlap with other color.

    Hi all,I
    Please respond to this as soon as possible since this is now in printing stage we need to send it immediately.
    Adobe disabled attachment, I just made a screenshot and sending you the image as attachment for your reference.
    The design has "Black" overlapping on "Blue" giving transparent on Blue color, see the pdf for reference.
    Please not that there is no transparency in "Black" or any other color used in that page.
    This is related to "preserve overprint" problem, when I switch off the preserve overprint in "distiller" setting I am getting the correct result but "Black" become "Knockout" instead of "overprint".
    Is there is any way to solve this problem.
    Please advice.
    Kaviya

    When you Knockout the colour it should cut a hole in the shapes below it -
    Start by creating a New Black Swatch
    Then Apply that swatch to your black frame
    Below I have turned off the Black Separation, and you can see that it has knocked a hole right through the items below - I've also shown you the Attributes Panel - you can see in the Spearations panel to that the black is still 100%
    Below is what happens when you have Black set to Overprint
    YOu can clearly see that the values are added up - You now have a 284% ink coverage here - so anywhere the black goes over the green here the values are added together and that gives you a different shade of black, because the Black is PRINTING OVER the other colours and adding, as ink is transparent, not opaque.
    If the black frame goes off into the white it will be 100% for whatever is touching the white, and then 284% when hitting the green here, so you get two distinct shades of black.

  • Laserjet 2605dn color printing problem, Blue/green line on page.

    I have an HP color laserjet 2605dn that has started to print a faint,thin  blue/green line from top to bottom about 3 inches in from the entire right edge of every page. I ran the cleaning cycle with no change. Any suggestions on how to correct this?

    I have very similar problem on my 2600n which is printing 2 vertical green lines very close together about 1.5 inches from left edge. All toners are in supply override mode with black toner reading: Estimated Pages Remaining 0
    Color cartridges contain toner with 329 pp remaining according to supply status page.
    Is this problem likely to disappear when toner cartridge(s) are replaced?

  • Black prints are light blue-green

    Print setting: Quality = Best, Grayscale and/or Color = High Quality
    I have run HP Print and Scan Doctor = had to uninstall and reinstall software then it checked out as okay
    Test Print from HP Print Doctor = colors are good
    Printer is connect to computer with USB
    Document prints are very light and a blue-green in color. Not black
    I have two HP cartridges: a new 60XL and used 60 = I got the same results from both.

    @toll,
    Welcome, and thank you for posting in the HP Forums!
    I read your post about the "Print Quality" issue you are currently having.  I would suggest trying the guide I post for you below to hopefully rid the problem and having the prints turn out normal again!
    Fixing Print Quality Problems for the HP Photosmart C4600 and C4700 All-in-One Printer Series 
    If the troubleshooting does not help at all, I would lastly suggest contacting HP's technical support to review your printer options with you.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.​html
    I hope this helps!
    If you wish to send me a "thank you" for my response to help, click the thumbs up  below!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How can i change my e-mail address color from blue to black when i send a new message

    How can i change my e-mail address color from blue to black when i send a new message

    Hi Steven, if you send to yourself does it come through blue?
    Is this in the Header or a Signature?

  • For some reason, "HSL" is gone from my develop panel.  I used to be able to adjust specific colors (blues, greens etc) for saturation, luminance and so on.  But that option is now gone from my develop panel.  How do I get it back?

    For some reason, "HSL" is gone from my develop panel.  I used to be able to adjust specific colors (blues, greens etc) for saturation, luminance and so on.  But that option is now gone from my develop panel.  How do I get it back?

    Right-click the title bar of any of the panels in the righthand column of the Develop module (for example, the Basic panel) and choose "Adjustments" from the panel list that appears.

  • Display switches to green and black colors

    New RFB 2.4gig MacBook Pro display switches to green and black colors and looks like a 256 color mode. It has done this two days in a row and only after surfing for about 1 hour. Restart fixes the problem. Usually when this occurs I have Safari, Opera, Mail and maybe another program open and occurs when closing windows in rapid succession. Situation does not occur for the remainder of the day.

    The problem has not occurred for two days after extensive use of the laptop. Both times that I got the green and black screens was after using the 5.8GHz telephone handset near the laptop. I updated to the latest Flash Player but I doubt Flash was the cause of the problem since Flash is regularly used and the condition only repeats when the telephone handset is used near the laptop. Never have had a problem like this with 6 previous Mac laptops.

  • 1 color solid color to red/blue/green constants

    Hi,
    Does anyone know how to convert 1 color. 
    lets say ORANGE.
    its red value = 16448250
    its green value = 29535
    its blue value = 16711680
    is there a way to know what ORANGE and its red/blue/green value?
    i guess to do something like this?
    thanks in advance
    Message Edited by krispiekream on 03-16-2010 11:52 AM
    Best regards,
    Krispiekream
    Solved!
    Go to Solution.

    Try the Color to RGB VI:
    Misha

  • Importing photos from iphoto to aperture causes blacks to turn blue. color corruption?

    I have a large library of jpg photos in iPhoto 11 v 9.3.1  and imported the library into aperture 3.3.1
    After importing to aperture, the thumbnails all look normal, but when I view the photos in full size, pure black is turning blue and pure whites are turning red.
    is there a setting that i'm missing or do i need to prepare the iphoto library before importing to aperture to prevent this problem?
    Has anyone else had this happen?
    The original masters all look normal when viewed in the finder, so it seems like a problem with aperture.

    To add to Kirby's excellent advice: Depending on the layout of your keyboard or your own command settings, the "Highlight Hot & Cold Areas" may be bound to a different key; You see the key when you select the command directly from the "View" menu. On my machine - with a german keyboard-  the key is much more complicated "⇧⌥H"  :
    Regards
    Léonie

  • Why is my Macbook Pro suddenly and constantly shutting down/crashing on me and giving me a blacked out or blued out screen with lines?  Seems like a total system failure is happening?

    Macbook Pro- shortly after upgrading to free software upgrade to Mavericks- 10.9.5-
    has suddenly been freezing up, but went more directly to 'shutting down,'  CRASHING on its own.  Most of the time, if I'm even able to successfully get the laptop turned back on, it only stays up/on for a few moments before repeating the failure.   The failure is often accompanied with the monitor going 'blank,' or most typically either 'blacking out,' or going blue/green or grey screen with lines or grids all over the monitor.  All Desktop visibility, functions or applications in process disappears.  This has caused repetetive 'forced shut downs,' which I never usually do, unless prompted to because I have no choice like this.... Or as I said, the computer itself will just shut down and turn off by itself.... Can anyone tell me what this issue is, and I'm pretty sure other Mac users have seen this exact thing I'm describing happening on their laptops, with their systems or on their monitors.  Someone please explain or point me in the right direction... as naturally my laptop just went out of warranty as well.... And I don't know if this means the entire system is basically corrupted, dying/dead... and or if it is a monitor issue, a hardware issue, software issue or if there is anything that can be done to restore, repair it, etc.?   Also another thing I have noticed ever since getting this laptop- (few years old now...) is that it runs VERY HOT... has in fact burned my lap /skin many times... and seems like the fan or internal operating systems/functions are also perhaps not functioning properly.  Can this also be causing the problem?  Or is it a corruption or virus of some kind? etc.   Thank you.

    What you describe sounds like a hardware issue. Unfortunately, you'll need to get that checked out by Apple. If you have an Apple Store near you, make an appointment with the Genius Bar and take the machine in for evaluation.

  • When printing from Illustrator it prints Black instead of Blue

    We have had this issue for a while now and cannot grasp it.  We have CS6 and Illustrator decides to print whatever it feels like.  Printing to a regular PCL driver prints black ink where blue is supposed to go.  We also tried changing the print driver to Post Script with the same black ink printing instead of blue.  Also in the print options right before releasing the job we changed the use Illustrator colors to use Post script colors and it still does the same thing.  We sent the job to a different printer and it prints out alright.  Why doesn't it work on our HP Laserjet 3800dn?  All other documents not created in Adobe products will print out blue just fine.  I want to know what is broken in Adobe Illustrator.

    Ask in teh AI forum and provide more details like system specs, exact print settings, color management and so on.
    Mylenium

  • Iphone 4 showing&taking pictures with Blue/Green Spot in the Middle

    I have the blue/green spot in the middle of the screen while and after taking the photo especially on white ground/wall or paper.
    Another thing is that My iPhone 4 back camera takes very yellow photos in artificial light.
    So Apple should immediatelly fix this issue. Even I am not able to understand why Apple did not test such basic possible problems.
    As you can see from the internet there are many iphone 4 owners and increasing suffering because of this problem.
    I wonder how many phones returned to Apple Stores everyday!!!

    Dear all,
    As a image scientist, I think iphone 4 camera image quality is very good. It keep most of the details with the cost of noise, but I prefer this style. Most important is iphone 4 color reproduction is very saturated, it's pleasing.
    However, green spot problem always annoys me.
    I made an app for this problem. It can perfectly correct this problem.
    You can see lots of images of green spot on real scenes. Of course there're images after corrections.
    http://alturl.com/cme7b
    We solved it perfectly.
    The App status is waiting for review.
    I will post information if it's on iTune.
    Here're screenshot for it .
    http://www.facebook.com/album.php?aid=10842&id=110149482384202

  • Black color link change to something else

    How can I replace the black link to some other link color from the process chains between the Start and the Load data objects? When I use the black links, I would get an error message to say that there are too many processes and not enough background processes: "Too many parallel processes for chosen server".
    Can the blank color links be used between the Start and the Load Data objects? I have about 5 to 6 Data Load objects to connect between.

    Hi,
    The Link connecting Start Process and subsequent Load process will always be Black.
    The Other Link colors defines as per the following
    Green
    A link is displayed in green if the event is triggered after the process that precedes it has been completed successfully.
    Red
    A link is displayed in red if the event is to be triggered when the process that precedes it has been completed with errors.
    Gray(link with Both Red and Green Circles)
    A link is displayed gray if the event is to be triggered after the process that precedes it was successful or not. When such a link originates from a process, only such links can originate from this process. Refer also here to Documentation for Possible Links.
    Black
    A link is displayed black when the event is triggered after the preceding process was completed and the system cannot tell whether the process was successful or not.
    <b>You can change the Color by removing the Link(right click on link and remove) and again while connecting you will get all the Three Options(green, red, Grey(red and green) Except Black color)</b>
    Hope this helps,
    Sudhakar.

Maybe you are looking for