Black & decker pI100ab problem

I have this power inverter,having problems with ipod.It charges fine with usb on my computers,but when i go to charge it on the inverter the ipod powers on but doesn't give the charging icon.The invert says it charges ipods.Tried different usb cables.The inverter has the red light for power.Help
http://www.blackanddecker.com/Produc...roductID=17926
Message was edited by: Maloik

The troubleshooting steps in the document here may help resolve the cartrdige error message on your OfficeJet J4580.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • One mov file plays in Media Viewer on Ext Hd Drv, imported into FCPX it plays 5 sec then goes black. No problem with other mov files.

    One mov file plays in Windows Media Viewer in Ext Hd Drv. Imported as Proxy Media into FCPX it plays in both Event and Time Line for 5 seconds, then goes black. No problem with many other mov files in same project. Tried converting this one file into MP4, but produced only pixellated jumble.

    Can you open the clip in the QuickTime player? What are the specs shown in the inspector?

  • Unable to Capture with MiniDV Deck - Strange Problem

    Hello everyone,
    I apologize if this is a repeat, but I couldn't find an answer among other discussions. I'll try to be as specific as possible..
    The problem revolves around capturing a MiniDV tape. We are using a Sony GV-D1000 deck, which is connected via Firewire. Final Cut Pro recognizes the deck as a Device Control and Capture/Input setting.
    We can control the deck, but we can't capture from it. The Log and Capture window reads "Preview Disabled". When attempting to capture, it pauses for a second and then says "The operation could not be completed as there is no video." This is very odd since the deck's display shows actively running video..
    Our system is as follows:
    8-core Mac Pro 2x3 GHz
    10GB RAM
    ATI RadeonX1900
    BlackMagic DeckLink HD Extreme Card
    w/a bunch of Lacie hard drives which I kept off during the troubleshooting..
    Things I have tried:
    - Restarting without Firewire devices running
    - Trashing FCP prefs in the library folder
    - Repairing Permissions in Disk Utility
    I found an article here that was interesting...
    http://support.apple.com/kb/TA24110
    It kinda implies that the other audio card (BlackMagic HD Extreme) might be the problem. But there is no way to disable this card... or is there?
    Can anyone help me?
    Thanks in advance.

    Hey everyone. Thanks for all the troubleshooting. Getting close to identifying the problem.
    I brought the deck home with me to try it out on my personal MacBook Pro system. Same problem. the tape would play back, you could control the deck, but it would not import.
    David brought up the tape itself, which, logically, I hadn't even thought of. So I threw in a completely different tape and voila! No problems. Was able to control the deck, view the video on my Mac's display (finally!) and yes, capture video to disk.
    Just to make sure the deck wasn't being screwy, I tested both the original tape and the other on my personal miniDV camera and yielded the same results. Except when playing back the original, video wouldn't even display on the camera's LCD screen..
    In short:
    There has to be something funky with this tape that they gave us. We will probably ship it to another post house and see if they can get it to work out on a different deck. When I return to the office, I will try the other tape just to confirm there's nothing wrong with our Mac Pro system there..
    Thank you all for you troubleshooting wisdom. I owe you all one.

  • Printing in Black and White problem

    Everytime I want to print in black and white I choose that option, click ok, then print.  The paper still comes out in color.  This happens on my work computer and my home computer.  I know it is not the printer because I can print word documents and websites in black and white.  Only pdf files refuse to print in black and white.  I have 200 pages I need to print for work that does not have to be in color and I don't want to waste my ink.  Does anyone know what I can do to fix this problem?  Thanks.

    You should make sure that anything on your interior pages is black and white, never trust someone else to convert things to B&W for you. If you are using a master page for the page numbers, that should be black and white too. You can have two master pages, one for color page numbers and one for black and white page numbers.
    Jay

  • Black stripe printing problem

    I am using LR4.4 on a 32 bit Win7 platform with 8gig of physical ram and a Canon IPF6300 printer. I have previously printed large photos up to A1 size without a problem. I have been trying to print a particular photo to A2 size but a 75mm wide black stripe is printed as a band across the photo. I have tried various things to improve available memory etc but have not been able to produce a successful print. At times the printer does not react at all and I have to close LR, re-open it and reprint. This latter problem occurred previously from time to time. I am able to print 2 A3 side by side successfully. I would appreciate some direction as to what is happening and whether there is a solution.

    @stephaniempls 
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
    I work for HP

  • Black ink venting problem

    3 out of 4 times that I buy the black 564 cartridge I have problems with it...Most of the problems turn out to be the venting...Yesterday I installed a new cartridge and made a printed copy and it worked fine but today I had to go through the ritual of using a knife to clean the vent AGAIN... Then had to run it through every process to finally get it to work...I think that cleaning the cartridge 3 times is what finally helped...Really frustrated with this aspect of the whole printing process...You waste a lot of ink just trying to correct the problem....PLEASE CORRECT THE VENTING PROBLEM....

    Thanks for the feedback. Do you have any photos of the vent area you could post here to the Forum? Also, what was the warranty ends dates on the cartridges and the country of origin?
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • MacBook Pro 2007 black screen nVida problem.

    After upgrading to Mavericks on my 2007 MacBook Pro. My display doesn't work anymore. I have a Black screen but computer is booting all the way to start up screen. I think it's the nVida problem. Any suggestions? I have done all resets and still not good.

    Hey Macbiv!
    Here is an article that will help you troubleshoot this issue:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • Palm Treo 755p touchscreen black - nothing visible - problem???

    I'm not very savy with this palm treo phone which I've had for 6 months.  Worked fine until just recently when the touchscreen would not illuminate at all - it's totally black (as though no contact is being made.) I can, however turn the phone on and off and the keypad illuminates as it normally would when in use.  I can even receive phone calls as well (just not able to see anything on the screen as to who is calling etc. I did not drop the phone nor get it wet. Have no idea why this happened or what to do to get the screen working again.  Called for Treo support and besides not being able to understand the customer service guy at all, I was able to finally understand that he was trying to set me up with a work order and that they would charge me $199 (US dollars) to fix the problem.  NO WAY - my son gave me the phone as a gift (IT WAS NEW) but he bought it on the internet.  Does this mean I'm screwed?  I'm not a happy camper - just want to know if there is some way I can get this thing working again without it costing me an arm and a leg. Any suggestions???

    I'm not very savy with this palm treo phone which I've had for 6 months.  Worked fine until just recently when the touchscreen would not illuminate at all - it's totally black (as though no contact is being made.) I can, however turn the phone on and off and the keypad illuminates as it normally would when in use.  I can even receive phone calls as well (just not able to see anything on the screen as to who is calling etc. I did not drop the phone nor get it wet. Have no idea why this happened or what to do to get the screen working again.  Called for Treo support and besides not being able to understand the customer service guy at all, I was able to finally understand that he was trying to set me up with a work order and that they would charge me $199 (US dollars) to fix the problem.  NO WAY - my son gave me the phone as a gift (IT WAS NEW) but he bought it on the internet.  Does this mean I'm screwed?  I'm not a happy camper - just want to know if there is some way I can get this thing working again without it costing me an arm and a leg. Any suggestions???

  • Nokia N9 64 GB Black - Rondom Reboot Problem

    My Device : Nokia N9 64 GB Black
    059l9x6
    My Deivce Frimware : Megoo 1.2 Harmattan
    Pr1.3 40.2012.21-3 Pro 006
    My Deivice ReBoot 40 Time In Day
    My Country Is Iran And Not Support Good NC
    Plz Help My Problem !!
    Tnx All My Firends

    @woudman
    Have you tried re-installing existing device software with Nokia Suite 3.5 Beta from Nokia Beta Labs http://betalabs.nokia.com/trials/nokia-suite-beta sign in with Nokia ID and password?
    Happy to have helped forum with a Support Ratio = 42.5

  • Black Macbook connection problem

    Hello
    We have 4 Apple computers in our household. We're connecting to the internet using an airport express. Three out of four computers (G4 Titanium Powerbook, late 2008 MacBook Pro, late 2008 Alu Macbook) can connect to this AE very quickly and the speed is fine. One computer (black Macbook 2.16 Core2Duo) has problems. When starting up or waking up from sleep it takes about a minute to find the AE, and then when finally connected it's very slow. I tried to set up the AE from this computer and interstingly, then all other computers can not find the network at all.
    Anyone any ideas ?

    I had a very similar problem with a PowerBook G4 that I inherited. The final resolution was to do a complete flatten and reload of OS X, but there are a few steps you can try first that are a bit less drastic:
    Try the following, and check to see if the problem disappears after each step ...
    1a. Delete Preferred Network(s)
    o System Preferences > Network > AirPort > Advanced > AirPort tab
    o Under "Preferred Networks," delete the network(s) you regularly use from the list.
    1b. Delete AirPort Keychain Entries
    o Launch the "Keychain Access" application located in Applications/Utilties.
    o Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    o Restart, or log out then back in.
    1c. Add Preferred Network(s)
    o System Preferences > Network > AirPort > Advanced > AirPort tab
    o Add the preferred network(s) using the "+" button.
    o Restart or log out then back in.
    2. Run the Disk Utility to repair Disk Permissions.
    3. Turn off the Mac OS X Firewall
    o System Preferences > Sharing > Firewall
    o Click the "Stop" button.
    4. Move System Configuration Files
    (Note: You will have to reestablish your network connections settings.)
    o Go to /Library/Preferences
    o Move the SystemConfiguration folder and com.apple.networkConfig.plist file to the desktop.
    o Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder & .plist file back to it's original location.)
    5. Create a New User Account
    o System Preferences > Accounts
    o Click "+" to add a new account
    o Log off, then log back on with the new user account.
    o Try connecting with the AirPort.

  • C7250 Printer, Black color print problem

    All colors except black perform well.  The black prints light and dark (normal) usually on alternate lines, sometimes at random throughout the document.  Have tried replacing cartridge and cleaning print heads (three times).  Also cleaned contacts on printer and cartridge.  Seems like a partial blockage, any suggestions?

    jgpat wrote:
    You might be accurate in your analysis.  I inspected the cartridges and the label on top of the black cartridge is centered under the slot of the receiver, but the color cartridge is off-center to the left of the slot.  I removed the color cartridge and re-inserted it but it still isn't lined up as the black is.  Can a novice make any adjustment without damaging the printer head?
    It would appear there is an issue with either the latch or the capping station.  In either case it would be best to have HP service the unit if it is still under warranty.  To Contact HP click here, or in the US call 1-800-HPINVENt.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • N770 TF 2GD5/OC Gaming black screen blinking problem

    Hello there,
    i upgraded my PC 4 days ago with a MSI N770 TF 2GD5/OC Gaming graphic card. I installed the newest graphic drivers. Clean install and without nVidia Experience. My problem is black screen blinking when i am playing or watching. Screen turns to black for 1-5 seconds like monitor lost its signal. It happening when i click to fullscreen button. No matter if its in youtube or windows. It happening every time. It does the same when i am playing. Big lag and then black screen blinking for 10 sec. Sometimes more sometimes less than 10 sec. I used Google and i am not the only one, who have this problem. Some people says, that GPU BIOS flash helped but in MSI website is only one BIOS and i dont know if its newer than mine or not. S/N of my card is 602-V282-380B1404100829 (if it helps) and my current bios is here h t t p ://leteckaposta.cz/186979270 (just click on the GK104.rom in the middle).  I think i tried almost everything. Registry clean, anti malware and spyware, drivers re-install, turn W Aero Off, UAC off and other worthless tips how to fix this issue. I monitored my PC with many temperature software and i am 100% sure, that overheating isnt the problem. So could you please check if the MSI Bios is newer than mine or tell me what to do to fix this irritating problem?
    Thank you very much
    PS: I am not a native speaker and english is my 3rd language tbh, so please excuse any grammar mistakes

    you are using latest vbios version, test the card in another PC

  • Ipad black Screen display problem?

    Having a problem today. My iPad fell off my desk (with its case on) and when I picked it up & tried to unlock it i was completely black. I connected it to itunes and did a reset but it's still black it actually talks now and any kind of display or the apple logo appears very briefly (like a second or less) but disappears ?

    You could always try the general steps of restarting, resetting, and then trying to restore but Im thinking that this is most likely a hardware issue so you'd be better off visiting an Apple Store first to see what a Genius rep thinks it could be.
    You can make appointments here: http://www.apple.com/retail/

  • Black Screen render problem

    When I try render it is a black screen then makes a sheep noise PLEASE HELP I'm using a macbook air

    The sound you are hearing, is the sheep having too much grass.
    This is a general render error. If you want more information on what is causing this crash, you should check your render error logs.
    You can find where they are stored in the Render Settings --> Log menu.
    That being said, it is usually three things that cause this. Two common, one uncommon.
    The biggest culprit is a plugin which is rendering badly.
    The second, is a codec which is not encoding properly.
    The far third, is that your RAM is dumping.
    If you want to post those, maybe we can take a look and talk you through it, but without knowing more about what's going on, we can't just tell you what is causing the problem.
    Good Luck
    -David A Turner

  • IPhone 5 - black model paint problem

    Dear apple community!
    I have iPhone 5 black model and edge color was chipped off after very carefull usage! If the paint chips this easy now what's my phone gonna look like in a years time after being in and out of my pocket, car keys, kids getting hold of it... It looks like anything could chip the paint. So my question is what kind of paint or marker I can use to repaint the edge of iPhone and hide that paint chips. I tried with black permanent marker but it comes off easy. Plase give me some advice because I'm desperate sad and disappointed. My new black iPhone 5 looks like trash with that silver dots. Thank you apple once again...

    In the same location as on the white model, just to the left of the front facing camera.

Maybe you are looking for