Black edge around touchsmart 846t monitior

My touchsmart 846t has a "black edge" of 1 inch on the right and left side of the monitor. This happend while I was gone from my home for several days, when I rturned my internet was not working and my touchsmart screen was frozen.
I did not notice (IF) my screen was goofed-up when I first tried to get on the PC, but the pages were very slow in closing and I'm not sure they were all closed before I finially just rebooted the PC.
When I reboted, after all or most of the pages FINALLY closed...Then I noticed the "Black Edge" around the screen.
I've looked for hardware up-dates, checked the monitior settings, shut the PC down and ungpluged it from the power supply, but nothing has worked..!!

No it is not cut off...everything has been pushed into a smaller area..!!
The only thing that I have notice is that, the cursor will disappear when moved to the far right of the screen, but it stays 100% visible when moved to the far left of the screen.
When moved to the far right only a small edge of the cursor is visible.

Similar Messages

Black edge around touchsmart 804t monitior

My touchsmart 804t has a "black edge" of 1 inch on the right and left side of the monitor. This happend while I was gone from my home for several days, when I rturned my internet was not working and my touchsmart screen was frozen.
I did not notice (IF) my screen was goofed-up when I first tried to get on the PC, but the pages were very slow in closing and I'm not sure they were all closed before I finially just rebooted the PC.
When I reboted after all or most of the pages FINALLY closed...Then I noticed the "Black Edge" around the screen.
I've looked for hardware up-dates, checked the monitior settings, shut the PC down and ungpluged it from the power supply, but nothing has worked..!!

Hello kennethrothchil,
You’re having a problem with a black boarder around the screen.
When you left your computer on, it probably tried to do an update and corrupted.
Try to run a System Restore; this will take the computer back before the problem without affecting any of your files.
Here is a link for a System restore.
Windows 7
Windows Vista
Let me know if this helps.

Black edge around canvas footage

A friend of mine has been editing together his showreel on my system. when i came home he asked me why the footage in the canvas viewer was surrounded by a black edge...and I had to tell him: i don't know...
my first inclination was to check all the settings, both for the clips and the sequences, and they were all correct and matching each other.
what i noticed then was that if i put "show image+wireframe" in the canvas, i saw that each piece of footage was completely square, not slightly rectangular as I thought they should be...
the files need constant rendering, sometimes it doesnt want to render as if the files have been corrupted or something, but the play properly.
I am not sure where the files are from or what codec, etc, as my friend didn't know. all he knew whas that they were off a digibeta tape he had gotten from a respectable post-prod place.
I also know that two of the 'films' where originally on dv and the third one on HD.
I cannot make sense of this, anyone elese can?
-j-

EDIT My turn to be too slow... sorry Andy. END EDIT
Right click on one of his clips in the browser and go to Item Properties > Format.
Get out a note book and write down all the information you see (or do a screen grab or print screen – just make sure you have the information available to you.)
Now click in his time line and hit Command-Zero. Change the setting in the General tab to match the settings of the clips that you wrote down.
This might take a little trial and error especially if you aren't familiar with some of the terms, but you will get there.
When you do, render problems should disappear and the black edges should disappear.
Let us know.
Tom

How can I print with black border around edge of image?

I'd like to add a black border around the edge of certain images I'm printing. I know it's fairly trivial in Lightroom, but I can't see where this option is in Aperture. Is this lacking in Aperture, or am I just missing it? Many thanks.
PS -- I'm aware there are some plug-ins that claim to do this, so if Aperture can't do this, please feel free to chime in with comments on the best plug-in for this task.

Rich Hayhurst wrote:
Here's what you need:
http://www.apple.com/downloads/macosx/aperture/apertureborderfx.html
Aperture BorderFX 1.1
Thanks, Rich. That's a good plug-in, and does cover what I need (with lots of other features, too). The problem, though, is it requires an export of the image, which I then have to either print from another application, or reimport to Aperture to print. I was hoping to find something that will either just apply the border to the print job, or that would serve as more of an Edit With . . . type of plug-in than an Export plug-in, so I can keep everything in one place. Thanks again.
Message was edited by: jeffd55

PSD files have black borders around the image edge

I've just uploaded an image file in PSD format to a folder in my Creative Cloud workspace. The image is a cutout object on single layer with transparency. It views fine in Photoshop and also in Quick Look/Preview but when it's uploaded I have a pixelated black border around the perimeter of the object in the layer. I thought it might just be the preview but it's the same when I open it in Photoshop Touch.
Is anyone else expereincing this?

Hi David,
PSD files are flattened when imported into Photoshop Touch and then lose any transparency. I'm not seeing a way to import transparency other than in PSDX format which the transparency would have to have been created in PS Touch. I'm moving this post to the PS Touch forum in case I'm missing something.
-Dave

Black border around games

When I installed my games the game stretched to the edge of the screen.
Today I tried to run a new game and now all my games have a thick black border around them and the game is small in the middle of the screen. What happened? How do I fix this?
Only games have this problem.

I am a newbie here and just wanna say Hi to everyone. I am Crystal from Louisiana, US.
free photoshop tutorials

Black edge in Adobe Premiere rendering

I'm rendering/exporting a photo slideshow in Premiere CS6 but I get a black edge on the right and at the bottom as if the photo is skewed out of position. Any idea how to get around this?

I think you would be better off if you posted your question in the Adobe Premiere forum,
http://forums.adobe.com/community/premiere
This one is solely for discussions on the forums themselves.

CS6 Photoshop Problem? Grey/Black Halo around feathered transparency??

Is anyone aware of a gray/black halo around feathered transparency objects. The halo occurs where the solid area of pic feathers to the transparent.
NOTE: Image looks fine in Photoshop(CS6) but when placed in Indesign (CS5) a black halo appears on page
This only happens when image is an RGB Tiff and layer mask is used to create transparency. If image is saved as .psd then it is fine. Also when RGB tiff is converted to CMYK then this is also ok.
I kook forward to anyone's suggestions.
Ideally I could just start using psd format, but I have to handle alot of images that are already in RGB tiff and it is time consuming to have to open and re-save all of these.
Adobe Guys, what have you done!! Photoshop CS5 RGB tiffs are still working fine. Please help me!!??
I look forward to a fix for this
Thanks.
Colorjam.
(Pre-Press Production Digital Image Operator)

Please see below for the visual explanation.
Please note the black halo on second image on top row.
If feathered edge is increased on mask, then so does the halo.
Halo will print as seen when job is sent to final PDF.
Thanks for your help Noel.
Colourjam.

I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!

I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!

Hi MyAppleID99,
You may want to check to make sure the clip hasn't been moved back and forth between wide screen and standard aspect ratios; sometimes a combination of letterboxing and pillarboxing can lead to a black frame "windowbox" when playing the final video. You may find the following article helpful:
Apple Support: What are Letterboxing, Pillarboxing and Windowboxing?
http://support.apple.com/kb/ht2320
Regards,
- Brenden

I have these black boxes surrounding things, e.g., there is a black box around the red "close" button on the upper left corner of this page. There is also an oblong black box

Hi - I'm not only having trouble waking up my MBP from sleep and having to restart repeatedly which is a pain in itself, but now when it restarted, I have these black boxes surrounding things, e.g., there is a black box around the red "close" button on the upper left corner of this page. There is also an oblong resizable black box sitting on top of anything. The content changes depending on the actions I take. Right now it says, "You are currently on a close button. To click this button, which closes the current window, press Control-Option-Space." Right now I'm open in Firefox, but it doesn't matter if only Finder is open, it's still there. I've tried closing all my applications and restarting and I also reset the PRAM. It won't go away. It's probably something simple, but I don't know how to get rid of it. Any suggestions are welcome.
Thanks,
Janet

Thanks so much. I saw this on "desktop strangeness" immediately after I posted and tried to retract my question. It worked perfectly. I'm not sure how VoiceOver got turned on unless something happened when I was trying to wake up the computer. I open the lid and it flashes whatever is open and then the screen goes black and I can't wake it up. Still looking for the resolution to this.

How to get rid of the black border around the artboard

Hopefully my last question for tonight.
I need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
So how-to get rid of the border? Thanks
***Update***
I figured it out. View > Hide Artboards. Maybe this will help someone. Doesn't change the fact my spider looks like a tick:)

Doesn't change the fact my spider looks like a tick:)
Try to get hold of a real spider and take a look at its anatomy, specially where the legs sprout from :-)

Iphone has a black line around the "swipe to access" box and i can't get it to turn on"

iphone has a black line around the "swipe to access" box and i can't get it to turn on"

Triple press the home button.

Using HD plasma as external display, black border around mac desktop

Hey all, I'm having some difficulty setting up my Panasonic plasma tv as an external display for my Macbook. Whenever I hook up the display I am faced with thick black borders around the mac desktop on the external display. I have messed with the resolution setting for probably 2 hours with no success and the borders persist. I have it hooked up via an hdmi to dvi cable connected to a mini dvi cable. Does anyone have any ideas on how I can get it to display full screen on my plasma display without the borders? The displays native resolution is 1024x768, I believe. Any help would be appreciated!

The problem isn't with your mac, it's the settings on the Plasma.
Make sure you are outputting the correct resolution (1024x768 you said), although are you sure the display doesn't want 1366 x 768? That's what mine wants through it's DVI board.
Once that's set, if you have boarder alignment problems then you need to adjust the overscan settings for that input.
If you have a commercial version of the Panasonic it's easy, just use the Picture Pos/Size button on the remote to get to the menu to adjust it. If you have a consumer version Plasma, then ?.. It might be buried in the service menu? I don't know, but once you figure that out you can adjust it. Do a search in avsforum.com for your model number + overscan and you'll find the info you need.

Viewing PDF in preview, black rectangles around links

I've created a PDF in Microsoft Word 7.0, the PDF looks great in all applications except Preview on a mac. It would seem that all links in the PDF have a black rectangle around them, this only seems to be an issue in Preview, is this a known issue? As near as I can tell, no other applications seem to be interpreting these links as having boxes around them, this would lead me to believe that the problem does not lay with how the PDF was created.

Hi,
Can you try any other PDF file in Preview (not the one you created)
Dimaxum

How to remove black border around image files?

I'm something of a beginner with Photoshop, so forgive me if I've missed something entirely obvious: for some strange reason I'm now getting a black border around all image files that I save through the "Save for Web & Devices" panel. Does anyone know how I can save without creating this border? It looks rather unsightly when I load it into a client site. The file in question is a .png, but I seem to be getting the same effect with all other image files as well.
Thanks in advance,
Shane

One cause could be having the matte color set to something other than none.
Is that a png-8?
MTSTUNER

Black edge around touchsmart 846t monitior

Similar Messages

Maybe you are looking for