Black "finish" coming off!/ that annoying "ping" under the keyboard

I have two separate issues with my MacBook (black) that I purchased about 2 mos. ago.
1) I'm hearing a "ping" or "tink" at regular intervals (20-30 sec.) under the right side of the keyboard, sort of near the "delete key" area. I noticed some other people have posted a similar issue, but I didn't see a consensus answer as to what is going on.
2) Apparently, the black finish of the MacBook is covered by some sort of clear filmy material...and, mine is beginning to peel off (at the seam on the right corner..just to the right of where my hands rest). I can only assume this will continue. Great.
Anyone else having these problems? I actually went to the "Genius Bar" this morning for help. My plastic-disengagement was the first case of it the fellow had seen. And, unfortunately, I don't think he properly heard the "ping" noise (as he had to go listen in the back of the store where it wasn't so noisy, and I wasn't readily available to point out what i was talking about). He may have thought I was just bothered by normal program start-up nosies. This "ping" noise is like water torture if you're working in a quiet library office.

Yeah, I'll probably wait a little bit to return to the Genius Bar, or take it to another Apple store. I'm pretty sure the "ping"/"boink" noise wasn't an issue in the first month of use.
He did make a record of the situation with the finish. I assume this goes into my apple care record and maybe some general database of "things we need to work on." I asked what I should do if this continued (with the fear that it probably would). He said to bring it back to the store. I'm not sure what Apple would do in that case. If/when I get to that stage, I'll update. I just wasn't sure if this was a possible problem b/c this is a new-ish finish.

Similar Messages

  • Finish coming off Macbook Pro around bottom of keyboard

    I just purchased my Macbook Pro about a year ago now and there's a spot where the finish is coming off. The little strip below the bottom row of keys has a little spot where the finish is rubbing off.
    What should I do about this.. is it fixable? Also my Warranty just ran out.. will this be costly?
    Cheers,
    Andy

    When it happened to my PowerBook after about six months, I was quoted a couple of hundred dollars to replace the top. I decided just to live with it, and when I bought a MBP to replace it, my first accessory was some surface protectors from http://apeelz.com.
    Warranty wouldn't have covered it anyway, unless you managed to find a particularly sympathetic customer support representative-- AppleCare doesn't generally cover cosmetic issues.

  • I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    Hi j2399123,
    It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
    Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
    For the QuickTime recording options, check out "Recording with QuickTime Player" in
    Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
    http://support.apple.com/kb/ht4024
    And for screen recording specifically, there's
    QuickTime Player 10.x: Record your computer’s screen
    http://support.apple.com/kb/PH5882
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • It says my security answers are wrong, so I guess I need to reset them, it says to click the rescue email button that shows up under the questions, there is no button that shows up.

    It says my security answers are wrong, so I guess I need to reset them, it says to click the rescue email button that shows up under the questions, there is no button that shows up.

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (96912)

  • I am using Adobe Photshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.

    I am using Adobe Photoshop Elements 11, I just transferred all of my data from an old computer to a new computer, all my pictures and documents transferred fine but, my albums are missing and the date and time that is usually under the picture are missing.. How do I get them back?

    Hi,
    Which operating system are you running on?
    The date & Time can be displayed by going to the View menu and checking Details - also File Names if you want them displayed.
    The Album information is saved within the catalog so it sounds as though you didn't do a catalog backup on the old computer and a catalog restore on the new computer which is the recommended way of transferring elements data. Did you just copy the photos over?
    Brian

  • Insect under the keyboard of my Retina Macbook Pro?

    Hi!
    Yesterday I was working on my computer, when an insect (maybe a termite or a moth) fell from the roof onto the keyboard of my rMBP. I turned on the light and quickly searched for it but it was gone, so my guess is it could have gotten under the keys. Of course, now I'm worried it could damage my computer!
    Could an insect get under the keyboard? Will it damage my mac? Should I do anything about this?
    Thanks!
    Arc.

    This may be simple to fix.
    Move your cursor all the way to the upper left, select  > System Preferences > Personal > Universal Access > Seeing tab.
    Turn "zoom" off.

  • Noise under the keyboard

    Hi all,
    My Powerbook model is with the higher resolution.
    I am getting noise from under the keyboard. It's mostly from around "G" and "H" key. It sounds like electric noise. I was wondering if anyone knows anything about it.
    thanks,
    Tom

    I'm having exactly the same problem. My laptop just came back from repair (the lid wouldn't latch closed) and that got fixed but I now have this new noise problem. The noise sound very much like the hard drive thrashing around at top speed - I'm always thinking I have a runaway process that needs force quitting. I originally thought it was just Spotlight re-indexing my drive after I restored the contents, but it's been about 10 days now. There's no way this is fan noise. Unplugging the power cord going into the laptop immediately stops the noise. While running on mains power, going into the Energy Saver prefs and setting the processor performance to 'Highest' ensures the noise is there full time, setting it to 'Reduced' stops the noise. Also, the noise goes silent during periods of high processor activity e.g. rendering a web page or searching for text in a document or double-clicking on an application (which actually initiates high disk activity). The noise volume is independent of the laptop's volume setting and the brightness setting.
    One thing I have kind of noticed is that the volume of the noise is sometimes significantly reduced if I quit Safari. If I then start it up again the noise stays reduced, but it eventually climbs back to it's loud volume. I'd be interested if anybody else notices that e.g. a logout followed by a login solves this temporarily. Anyway, that's my 2c worth...

  • How safe is an air blaster/high pressure air to clean under the keyboard?

    how safe is an air blaster/high pressure air to clean the stuff under the keyboard? ive heard those things can be dangerous. any ideas?
    if you recommend it, how do you use it safely? which brand do you suggest?
    please advise. thanks.
    Macbook Pro   Mac OS X (10.4.8)  

    This was standard procedure at the computer lab at my college. Just make sure to use compressed air cans designed for photographic and/or electronic use.
    Put the extension tube on the can. Holding the keyboard/laptop at an angle, insert the nozzle between each of the rows of keys and give it a few short blasts. Debris will be blown out of the opposite end of the keyboard.
    Make sure not to hold the can on its side or upside down when you do this, because the propellant in the cans can come out as a liquid and may leave a residue.
    I still do this routinely with my systems, and have never had a problem. My oldest laptop is now seven years old and has not suffered any ill effects. We did this weekly at the computer lab.
    My main problem at home is cat hair, which is easily removed by this method; friends of mine with beards say it also works for the occasional errant whisker. Cleaning keyboards at the lab in this manner dislodged all kinds of nasty bits, quite often including Doritos...
    Ned, this actually does work pretty well. Worst case, it just blows the larger/heavier debris to one end of the keyboard, where it can be more easily tapped out.

  • Black ink coming off of pictures

    Hello..
     I have a new 8500 premium inkjet all in one printer. I have found that when we print pictures using HP Advanced Photo Paper the black ink rubs off extremely easily ruining the pictures.. We are using the HP ink that was initially included with the new machine.. Is this a known issue? How can this be corrected?
     Thanks all for your help..
     Ron

    I just purchased my 8500 and am having the same problem with this and verticle lines in photo. Have you had any luck with a resolution?

  • At starting, the browser looks darker(blacker) all it, and that is it to the end. Nothing is seen, and so it can't be used. Help!

    I have used the browser since I started surfing the web; I love it. However, it's been a month now since it started showing me a darker screen that couldn't let me anything. Yet the trademark that usually appears on the left angle is no longer shown whenever I open the browser on my PC. I currently use Maxthon browser as it seems somewhat reliable than IE.
    Likewise, a lot of crashes on my desktop computer. Firefox is always stopping to respond and to restart automatically.
    I have not seen this before, please help!

    Yes Philip, here are the report IDs:
    <pre><nowiki>Submitted Crash Reports
    Report ID Date Submitted
    3b61a00a-4b37-4f8b-a3e6-6f84188d3f02 10/27/2013 2:49 AM
    d26a1aed-0ae8-4812-abcc-2fded589c6f3 10/26/2013 11:58 PM
    8b8fbe27-d36e-4bc8-b905-790b644dea08 10/26/2013 10:40 PM
    c6fed9f8-a783-459f-8692-5b6baffd343c 10/25/2013 3:37 PM
    a58983cf-31a2-4e0f-883b-bb2c54e46fd6 10/25/2013 12:47 AM
    cd77d8b3-ad1b-432e-a08f-2fcd2294fa99 10/21/2013 12:59 AM
    4d09c0c8-2a25-493b-818b-c38862a11f38 10/21/2013 12:58 AM
    8b14c2cd-fae8-4d8a-9005-9e07137205d7 10/20/2013 9:02 PM
    c37c27a1-c3d5-43df-b84a-c197b9f2f062 10/20/2013 4:03 PM
    283678c1-f3a5-4cfd-9b58-7cec9e532c2a 10/18/2013 1:10 AM
    a97163b4-aa6a-49e4-ab1e-19fd2066db41 10/15/2013 12:45 AM
    6fc40d6f-37fc-4eaa-8670-8698723e2403 10/13/2013 1:48 AM
    6f4b99f0-2b0c-4b29-aee4-1ec2c6eb9f98 10/13/2013 1:45 AM
    2531e512-917c-4ef5-8f24-80ccca6c579d 10/12/2013 3:38 PM
    59ea336d-7f06-4e72-b30e-97da02b6da0a 10/11/2013 12:21 PM
    6e7ef9fd-75d6-44a0-8cce-7d19aff67b8e 9/17/2013 4:41 AM
    51c1a206-d5fc-4cd3-a99b-08615a47bc19 9/14/2013 8:29 PM
    c6ddf619-0ecd-4dd3-b692-7bbb446eb581 9/14/2013 3:17 AM
    98f5e394-dd56-404e-8e3e-0b8fda512a11 9/14/2013 1:35 AM
    b9fe5a6a-0b02-482f-8db4-3eff15e6b882 9/9/2013 12:18 AM
    9d60ea8b-7814-4243-9be4-81ebd09ca782 8/25/2013 1:57 PM
    99b36efd-46f2-4a31-97b6-d9cacdbad973 8/22/2013 10:28 AM
    6b1784d9-f10c-468f-a196-e3f95d2bb150 8/21/2013 2:21 PM
    a1394202-a9df-4d58-93c2-12d2870b0aeb 8/17/2013 10:10 PM</nowiki></pre>

  • I have a mac which plays the boot sound but the screen stays black. Recovery mode does not work, as the keyboard is wireless. What do I do?

    What it says in the title.
    I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
    Now it won't turn back on. It plays the start up music but the screen stays blank.
    The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
    I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
    From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
    Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
    This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...

    kodemage wrote:
    well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
    I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
    Good luck.

  • I have a black macbook 2008 10.6.8 version.  The keyboard is not working.  Any help?

    I have a black macbook 2008 10.6.8 version.  For some reason the keyboard just stopped working.  Any help?

    Try a smc, then the pram reset. If still no joy, you might want to take it to the Apple store. Also look in the headphone jack and see if there is a red light on.
    SMC reset:
    http://support.apple.com/kb/HT3964
    As always do a back up first.

  • I find that entering "m" on the keyboard often deletes the previous typed character instead

    Anyone know how to submit this as a bug/feature report to Apple for consideration of potential changes as a future improvement in iOS implementation?
    Thanks
    PS This site is a bit out of date - iPhone 5s, iOS 7.1

    You are very perceptive, and this is indeed the reason. However, the delete button is both larger than normal buttons and very close to the "m" - offering the possiblity of increasing the space between them to reduce the potential interference. Grown up fingers are large and the keyboard is small.
    Many people I have spoken to have the same problem either frequently or intermittently.
    This is certainly an "avoidable feature", which I would like to suggest that Apple could consider improving. Hence my question, which was not actually looking for an explanation but asking how I could make the suggestion directly to Apple.
    But thanks for your input.

  • Iphone 5 black coating coming off.

    I bought iphone 5 few months back in india. but recently black coating has started to come off. Need suggestions on what could be done.

    Thx Rojmer for your prompt reply. Let me tell u thats not the case. i have iphone 4 which is still in immaculate condition after using it for couple of years. i do not keep my phone in my pocket. i have many friends facing the same problem and the videos on youtube reconfirm the same. which is why i had insisted on getting a replacement in white color as it does not have any coating on it. the quality is detoriating. we put in our hard earn money to buy expensive smart phones and what u get is a sub standard product. NOT ACCEPTABLE

  • Sony KDL-50W800B How do I turn off that annoying "ding" sound

    The "ding" sound plays with every touch of a button while navigating the menu. MOST annoying.Please help me turn it off. I tried the online chat with Sony but I connected with the least knowlegable person ever.

    Hi gregFlorida2014, 
    We recommend you to try checking the below setting to disable/turn off the key tone of remote control operations:
    1. Press the HOME button, then select [Settings].
    2. Select [Sound] → [Key Tone] → [Off].
    For best assistance we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
    Thanks!
    Jerome
    If my post answers your question, please mark it as "Accept as Solution"
     

Maybe you are looking for

  • Can we Improve the code Further

    Hi All i 've the following code. Can we improve the code further PROBABLY BY USING FORALL OR VARRAYS? (MY ORACLE VERSION IS 10.2). Thanks in Advance CREATE OR REPLACE PROCEDURE PR_INS_TEM_EMP(M_USER_DEFINED_VALUE NUMBER, P_ESAL NUMBER, P_EDEPTNO NUMB

  • Configure the file adaptor so as to send sample XML message to integration

    Hi all , I am totally new to XI. I had done the configuration and now i want to test the scenario but i dont now how to do that . please help me out how to do it. its an urgent. Thanks, shuja

  • 4-line e-mail header is missing from printed e-mail off hp e-printer

    This happened suddenly, from one day to the other.. Now when I receive an e-mail to my customized hp-eprint printer, there is no To / FROM / DATE / SUBJECT line anymore How can I restore it? Thank you. This question was solved. View Solution.

  • Lenovo T530: Photoshop CC 2014.2 can't detect Nvidia card (340.84)

    I have up-to date Windows 7 x64 SP1 ENG version of windows. Here is some screens to illustrate the problem The problem poped up 2 or 3 revisions of Nvidia driver ago with original version of Photoshop CC 2014. As you can see updating program and vide

  • Re: calling charges by country

    The website is a joke. I simply want to know what the cost per minute is on pay as you go, for calls from Spain to a UK landline. All I keep on getting is the rates page which does not work. I am going round and round in circles. How hard is it to fi