Black flash in iMovie template

I'm using iMovie 10.0.3. I'm using the Retro template to make a video. Near the end of the template, there is a millisecond of black video that I can't seem to get rid of. It flashes between two "Title" clips. I placed an iMovie "Transition" clip between the two "Title" clips... didn't work. Black flash still there. I've changed the length of the title clips... didn't work. Black flash still there. Any ideas how to get rid of the black flash? There must be a simple answer... or perhaps not.
Thank you.

QTpro is able to convert some flash files into .dv... but most people are not satisfied by quality....
some bravehearted simply use screen recorders as SnapzPro to "film" any flash playing on screen..........

Similar Messages

Black flash after transitions

Using iMovie 6, sometimes there is a black flash at the end of a transition (working with photos). Doesn't happen on every transition and doesn't happen all the time. I work in an elementary school computer lab and it happens randomly on all 30 computers. (iMacs 10.5.8) I just put together a movie with about 30 photos using the same transition (cross dissolve) between each one and it flashes on about half of them. Any suggestions?

I had the same problem but with white flashes. Somebody on this forum helped me solve it...
First remove the affected transition. Then highlight a different clip (not the beginning or ending clip betweeen which you want the transition). Then drag the desired transition from the pane between the two clips. The transition re-renders and most times this clears up the offending white or black flashes.
But then it stopped being a problem for some reason - maybe the last update of version 6?

Partial black flashes/stripes on exported m4v and sometimes mov????

Hi everyone,
I just bought a Canon HF100 full HD camcorder and a Class 6 8GB SDHC card which according to Canon manual should be fast enough to record full HD by the camera.
So the question is that in iMovie 08 where I've imported it at full resolution - when I export it using Share -> Export Movie and select either Medium or Large i get black flashes or stripes in the output video - note that they don't go across the whole video though
I didn't think I was getting it using Share -> Export using Quicktime but I just saw one today that only has 1 black flash but it's there
Playback in imovie shows no black flashes at all.
I've tried exporting all sizes and all qualities and see black flashes in all qualities and sizes..
Just wondering what it might be caused by???
Thanks
Jason

Problem was a faulty logic board, apple replaced it under warranty

Random black flashes when I render my movie?

When I render my movie in imovie '11 the movie has random black flashes that weren't there when it wasn't rendered. Can I fix it somehow?

Hi
To be able to help You must supply more info
• Material used - in what format/codec ?
• Render in iMovie'11 - How do You get it to do this ?
• What's the End Result You want to get ? DVD ?
• Where in the process does the Black flaches first occures ?
and any more You can think off - to set us up on track.
Yours Bengt W

Black Flashes in Premiere and on Final DVD

I was not too concerned about the situation in the Source Monitor when about every 4 seconds I see a very fast, but obvious (nonetheless) Black Flash/Flicker on the screen. I thought it may be just a playback/RAM thing and that it would not go onto the final DVD burn. However, that was not the case, the Export, Burning and Playback of the DVD carried the Black Flash over. I am using Premiere Pro CC 2014. The footage is a mix of a Canon XH A1 and a Panasonic GH3. I have tried Square Pixels, NTSC and just a host of things that I lost track on, but it is annoying and obvious and has to be fixed. I am hopeful that there is an easy answer -- Please Help!!!

Same issue here exporting to MPEG2. I'm using Premiere Pro CC 2014 on a Mac Book Pro. My source video is AVCHD. I'm getting a frame of black at a regular interval of 1 second.This only occurs with Premiere Pro CC 2014. My older version of Premiere Pro CC exports it fine.

External monitor black flashes

Anyone experiencing black flashes on external monitor? I'm using a Dell P2414H connected to a retina macbook pro late 2013 via displayport.
Thanks for replies.

Hello, Spinnn.
Thank you for visiting Apple Support Communities.
Try the troubleshooting steps in the article below.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H.

Black flashes on render

Hi! I am rendering a sequence with premiere and I am having black flashes on the final movie. I tried different formats, but I don't know what it is. It looks like a random black frame every 10 seconds more or less...
I have my files on an external hard drive connnected through usb. Could it be something related to that?

Hi there - I am having a similar issue - black flashes on my exported video that are not there when I watched it on the timeline.
Here is my info:
1) Premiere Pro CC 2014
2) MacBook Pro
3) Intel Iris Pro Graphics
NVIDIA GeForce GT 750M graphics processor with 2GB of GDDR5 memory
4) Mpg4
If you have any info, I'd appreciate it! THANKS!

Premiere Pro CS6 error - black flashes on frames - Basic 3D bug?

I am currently working on a lyric music video which incorporates video and still image backgrounds with lyrics superimposed over the top in time to the music. I'm adding the lyrics by creating images with the words in Photoshop and then animating them (scrolling, spins, wipes, etc) in Premiere. All was going well until I tried a recent render and noitced that some effects were showing flashes of black on screen during text movement (flips or twists seem to be the culprit). I figured it was a render error but after trying a few different output methods and not curing the problem I realised I was getting the issue on the timeline when scrubbing through frame by frame. I've attached some images to demonstrate the problem. If I open an earlier saved version of the project then effect is fine on render and on scrubbing through the timeline. Have my later saved project files got corrupted at some point? If it was a software or hardware issue I would have expected it to have been happening from the outset but this effect has been fine until now. Is it fixable or do I have to go back a few versions and redo my recent work?
Ok I've just realised while grabbing the attached images that the black frames appear to be occurring on the first frame of each new text still image - I don't know if that helps with identifying the problem?
Ok another update - it appears to be the Basic 3D video effect that is causing the problem - if I remove that and have the text just appear then the black flashes go. But as I said above it worked fine in earlier project versions so it can work and isn't an inherent fault so I really hope I can find a solution and not have to remove the effect.
Really hoping someone can solve this for me, it's only a hobby video not a job but I've put a lot of hours in and am nearly finished so would be pretty bummed if I can't resolve the problem.
Thanks :-)

An update - this is definitely looking like a bug!
Each of the words is a separate Photoshop image cropped to the size of the word and I have then used the Basic 3D effect to rotate each image in turn from -90 degrees to 0 degrees so it appears on screen. Yesterday I tried changing the settings for the first clip and the black square disappeared if I reduced the range to -63 degrees to 0 degrees.
Success! Or so i thought. I moved the the next image and changed the range to -63 degreees to 0 degrees but the black square remained. In face I had to reduce the start rotation down to -58 degrees before the black square disappeared from that image. This progression continued with each subsequent clip needing a futher reduction the starting rotation so by the time I got to the last image I the start rotation had to come down from -90 degrees to around -20 degrees.
Defintely a bug? (It works the same whether I was using negative or positive start angles btw).
I'll try using a different file format for the word images in case it's an issue with Photoshop image

Using Flash/AS as Template possible?

Hello Everyone!
I'm very new to flash (just started last week) so please bare with me if this quesion sounds ridiculusly stupid
I wonder if it's possible to use Flash/AS files as "templates" - in other words, we have the website http://shop.variuscard.com and the header is subject to change depending on the product-category you click in the shop. We will have approx 10 categories, and each will have a different product displayed in the flash movie, but the "background actions" should stay the same.
Now, in case I need to change something (let's say the logo changes from blue to red.. and the particle-size and shape) I don't want to change all 10 or more files again. So is there a way to use the "basic" flash file as template, which means - position of the Logo & shadow, and the particle code, and just change the variable pictures and stuff inside the categories? I took that red card-printer as sample of the card-printer category for example.
Thanks in advance!

There are a few ways you can manage having a template file. Probably the more modern approach is to have data file that defines certain characterstics of the file's content, such as the logo image it uses, the title it displays, where things get placed, etc. Then you have your Flash file dynamically load/adjust the content per what the data file dictates. So you data file could specify the name of the logo image file and where it gets planted and the file could use that info to load that file and place it where it goes.
Another thing you can make use of is the FlashVars parameter that the embedding code allows for. So if you had the same banner in the same web site on different pages or sections of a page, you could use the FlashVars to indicate some parameter each file should use to decide what content it needs to make use of.
Combining these approaches can alow you to only have one Flash file, and one data file that you change as needed.

Flash CS4 Quiz Template: Help Needed

My organization uses the Flash CS4 quiz template that is included within the eLearning suite. Everything works great. The quiz loads on the LMS, it gives learners' their scores, etc. The issue we're having is after the score is recorded within the LMS.
If a user fails the quiz, the LMS marks the quiz as 'Completed/Failed'. The LMS (Inquisic EX), then, moves the failed quiz into the 'Completed Courses' tab. I understand why it does this because the 'Completed' mark given refers to the learner having gone through all of the pages within the quiz; however, the learner failed the quiz. If the learner goes back into the quiz and passes it the second time around, the LMS continues to state 'Completed/Failed'.
Does anyone know why this would happen? Are there SCORM settings we ought to change within the source code provided by Adobe?
I really appreciate your help!!

I think this is what I'm having trouble with, did you figure
it out? I need help making checkbox text have multiple
lines.

Black flashing screen while in photoshop..how to stop?

Only once I open an image and start working on it, I get this annoying black flashing screen I've already updated all my drivers and also tried a few things from google, but hasn't worked so far ...Anyone know the answer?

DIsable GPU drawing in Photoshop, or update your video card drivers from the GPU maker's website to pick up at least 2 years worth of bug fixes that you are missing.

Black flash appears after transistion

Sorry if this has been covered, but I can't find anything on the forum. I have a problem with slides that flash black for a split second after a transistion. I have removed the transition and played the section and there is no flash on the photo or the slide before it. I then add any transistion to that slide and right after the transition is replaced, there is a flash of black. Now I used to get this when there were a lot of editing artifacts left over (little tiny spaces between slides or a sliver of a former slide left tucked in) but these are new slides being plopped into a fresh timeline. Replacing the slide in that particular spot does not fix the problem, as the flash will appear with the new image as well. I have trashed the entire project and started over and made it to another place in the new timeline, only to have it appear again with a different pair of images with transition. Once it appears, there doesn't seem to be any way to get rid of it to use a transistion of any type. Any ideas what may be causing this problem? It also embeds itself if I save it to QT or DV, the blink of black appears when it is converted to other formats (such as Youtube).

That may be a clue, as when this happened before on another project, I had a clip created on MOV for titling at the beginning, then about 20-40 seconds into the slide show, the 4th or 5th slide would always have that black blip in it. Once I dumped that project and started over with all the same slides and transitions (plus the MOV of the opening title, I didn't have that black flash. Mystery eh?

Flash 8 Slideshow Template

Is there a way to cause the Flash 8 slideshow templates
to always open in autoplay mode?

You can download for free many flash slide shows from the following website:
http://www.flashkit.com it also provide the source code so that you can learn.

MSI Graphics Card - R7850 - Black Flashes In Game / Monitor twitch.

Purchased the card and worked perfect for around a week, now I am getting this constant black flash in all my games, it last around 1 second and happens every 5-8 minutes.
This is very annoying and I am disappointed about paying £250 for this major issue.
Currently I have tried all versions of the drivers, 13.1 13.Beta, driver sweeper, fresh OS install the lot. I could understand maybe if it had done it form the start, but it worked fine and now it is doing this.
Temperatures are fine.
I5 3570K with Hyper 212 EVO cooler - Never above 50 at max
600W PSU
The odd thing is it only happens in certain games.
League Of Legends, Starcraft 2, but not in games for example DayZ
I would really would like fixing I am not happy paying this much money,
Is it drivers? ( If so can I return it, I am not waiting for drivers to fix a faulty product )
or do I need to RMA? Surely not if it doesnt happen in some games.
Will get video footage sometime

ISSUE SOLVED WITH MULTIPLE FIXES
Ok Guys, Im going to be updating how I fixed the issue for those that read, My monitor is a 1080p 75hz monitor, even though I KNOW its 60hz The Catalyst ( CCC )
Program ( EIED ) Was telling me it was 75hz. So I manually set it to 60hz and everything appeared fine. However the flickers started,
I donwloaded software called Radeon Pro and created a new profile.
I click add new profile, when to the ATI folder and added it. Forced the settings I wanted like in CCC and disabled overdrive ( It still downclocks which is nice )
however this is just personal taste, what actually solved the issue was there was an option to manually force a refresh rate of 60Hz.
All I do now is run the profile just to make sure each time ( Im sure its auto anyway) and the flicker has stopped. The reason I believe the issue was happening was my FPS were going past 75, then down to 50 quickly in fast games like SC2 and LoL and the flicker happened. So the refresh rates were getting confused even though it said 60hz in CCC and I tried Vsync.
ALSO!
Coinciding with the fix I also set my games to borederless at the same time of doing the fix mentioned above so that may be the fix or the RadeonPro thing. Yet to test it fullscreen so try that.
Authough forcing 2d clocks didnt work for me, here is how to do it.
Open CCC, top left make a new profile, Close CCC.
Enable Hidden folders ( Search folder options )
The go to Your name on your PC -
APP Data
LOCAL
ATI
and go to your new Profile
EDIT IN NOTEPAD
and look for
<Property name="Want_0" value="30000" />
<Property name="Want_1" value="80000" />
</Feature>
<Feature name="PowerControl_PCI_VEN_1002&DEV_679A&SUBSYS_27601462&REV_00_4&BAB4994&0&0008A">
<Property name="Want" value="0" />
</Feature>
<Feature name="MemoryClockTarget_PCI_VEN_1002&DEV_679A&SUBSYS_27601462&REV_00_4&BAB4994&0&0008A">
<Property name="Want_0" value="15000" />
Now look for this
Now the 30000
and 15000 part are your idle clock speeds, just raise them or make them match your cards default clock speeds,
Like so
<Property name="Want_0" value="80000" />
<Property name="Want_1" value="80000" />
now this didnt work for me as my above method did, but it may work for some,
remember though this means your card with be a little bit hotter ( didnt happen to me in testing though )
You can also raise the two voltages to stay the same.
But again the above RadeonPro methode worked for me.
Thought I would be a nice guy and update how I solved it for others having issues.
Peace, ZII
Youtube.com/videofletcher

What does black flashing under my mail on my dock mean?

There is a black flashing square under my mail icon on my dock. What does this mean?

Open AirPort Utility, the application that you used to configure the AirPort Express and click Manual Setup.
Click directly on the word "Status" (2nd line) and a window will open to tell you why the Express is complaining. What is the message?
It might be a notification that an update is available for your Express.

Black flash in iMovie template

Similar Messages

Maybe you are looking for