Black frame when cropping raw

When editing Canon raw images (downloaded from Canon 20D) I am frequently encountering a problem when cropping. After cropping the image, it looks fine on the screen. But when I leave edit mode and return to the library, I find that instead of the image being cropped, the area of the image I wanted to keep has just remained the same size and the areas I intended to remove have just been replaced with a black frame. Anyone else have this problem? The only way I have been able to fix is to "Revert to Original" and then do my editing in two steps: everything but crop, save and then crop. Very annoying.

I too have the Canon 20D. I just tried an edit using iPhoto and it worked fine. I think you might be missing a step - (?)
*Click the crop icon, layout the area you want to keep (background/edges will become darker/black)
*Click the crop icon again.

Similar Messages

Why am I getting a black frame when I'm trying to add a freeze frame?

Why am I getting a black frame when I'm trying to add a freeze frame?

There are a few ways to make a freeze frame. What exactly are you doing? Using the hold function? Connecting a freeze frame? Exporting a still frame? Happens it's because of the specs of your media. What are they?

Gaussian Blur effect causing black frames when rendered.

I am only using one effect in my video, its the gaussian blur, and in the previewer it shows the effect being applied, however it shows random black frames in the previewer, I thought this was just a random previewer issue.
I then rendered the video but when the blur effect is being applied it is showing random black frames in the video.

Talked to customer support and found out that it was a duplicate Gaussian Blur effect on the same frame causing it to have some issues sigh*
But thank you for the info about the media cache, I did not know about that.

Opacity fade leaves black frame when removed

I have been using fades in opacity under a clip's Video Animation option. What has me frustrated is that, if I try to remove the fade by pushing the opacity slider back to the end (or beginning) of a clip, it leaves one black frame. Cutting the frame off is impossible because FCP thinks it's helping me by maintaining my "fade." My solution up to this point has been to reinsert the clip, but that is just too silly for words. Any insight, help or commiserations? Thanks, guys!

What are the specs of the media? What are the project properties? Is the clip retimed?

I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!

I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!

Hi MyAppleID99,
You may want to check to make sure the clip hasn't been moved back and forth between wide screen and standard aspect ratios; sometimes a combination of letterboxing and pillarboxing can lead to a black frame "windowbox" when playing the final video. You may find the following article helpful:
Apple Support: What are Letterboxing, Pillarboxing and Windowboxing?
http://support.apple.com/kb/ht2320
Regards,
- Brenden

What is the best format to choose when converting mts files to fit well with iMovie? I am using iCoolsoft for conversions and can pick from almost any kind of formats to convert to. I don't want to get the black frames... what do you advice me to pick?

I have lots of MTS files stored on an external hard drive that I want to use in my iMovie films. Now, as you know, iMovie doesn't like them. I have bought iCoolsoft for converting my video files into any format I want but now I've got another problem: what format is the best for iMove? Some of the formats I've tried are giving me a black frame around the video clips and some are bigger and other smaller but anyway I don't want them at all! Can anyone recommend what format to convert to to keep the original clip's size and no frames and still be liked by iMovie to be able to import them?
Much thankful for any kind of support and reply on this one.
Eva

The format iMovie uses when you edit video after it's imported is Apple Intermediate Codec, it will have the file ending .mov but internally it's set so the Mac can edit individual frames easier and play them back easier at full speed. If you have the option of saving to QuickTime .mov see if there is a pulldown list of all the different "codecs", that's the style or flavor of compression applied to the video frames. If Apple Intermediate Codec (AIC) appears on that pull-down list choose that as your codec when you save to .mov.

Media encoder inserts black frame at beginning, when converting my MOV file to H264 for YouTube 720pHD

I'm using Adobe Media Encoder to convert my MOV file to H264, and selecting "YouTube 720pHD" (for Instagram) as I was instructed by someone at Adobe over the phone. But it inserts a black frame at the beginning or end. When I open the converted file on my desktop, the black frame is the first frame. After I upload to Instagram, the black frame is at the end. How can I get rid of the black frame?! Please help!

Welcome to the furum, Forrest.
Hmmm. I don't recall hearing of that problem. There may not be many users who can offer a solution.
This workaround should work, however: Open the exported movie in QuickTime Player and remove the first frame. (I think it's only the first frame that is black, not the first second. Remove all the black, whatever it is.) Save the movie. That may cause QT Player to save it into a new movie. Use the modified movie for your Web site. QuickTime Pro is required — $30 from Apple.
Note that you've posted in the iMovie 6 forum, not the iMovie HD forum for iMovie 5. There are fewer current iMovie 5 users here. Most were iM5 users, however, so someone might remember this problem.
Karl

How to keep original aspect ratio when cropping in Camera Raw?

How to keep original aspect ratio when cropping in Camera Raw? Cant figure it out! With shift, the aspect ratio is 1:1. But I didnt set it to 1:1 (I checked "normal").

The Shift key works once you’ve set your crop ratio. DSLRs would typically do 2:3 and others sometimes do 3:4.

Black frame in embedded quicktime movies in Keynote when exporting to quicktime movie

I've included some quicktime movies made in Photoshop in my Keynote presentation. When viewing the Keynote presentation from within keynote, the movie play perfectly. However when I export the presentation to a Quicktime move, the first or last frame of the embedded movie is black creating a flicker effect on play.
The quicktime movies have been embedded as loopable animations using the animation build in function 'Start movie' (after transition with 0 delay).
Is there a setting that will prevent the black frame on export or is this a bug?

Trim out the frames in a video editing application, Quicktime, iMovie

Crop and Trim without black frame

Photoshop CS2:
A screenshot contains an image on a neutral
background. The image is roughly cropped and
then trimmed in order to remove small strips
of the background. As a result the image gets
a black frame with exactly 1 pixel width.
So far I have to remove the frame by reducing
the canvas width and height by 2 pixels each.
Any better solution ?
An image with gamut warning shows out-of-gamut
colors by an 'alarm color'.
Is it possible to save the entire image directly,
instead of taking a screenshot ?
Best regards --Gernot Hoffmann

depends on the version of iM you're using:
in older versions, the pic-in-pic was limited: it allowed only to insert content with the same aspect-ratio as the project itself = 16.9 .... if the pic was square, iM added 'borders' to make it fit.
Work-around:
make your pics 16:9 by adding transparency, read this in the UseR Tipp section of this board:
How to create a pointer or a custom title
or, update to latest iMovie10 ....
here, a diff. aspect ratio of pic has no 'borders' -effect; .....

Black Frame Around Slides when Playing

Hi!
I recently became a Mac user (ok, in the last year) and love it. I use keypoint a lot because I'm a teacher, however I've been a little disappointed that I always have to export my presentations and use a PC when I want to project/play my slides for my classes because whenever I start to play my slides there is a thick, black frame around each slide (only when it's playing, when I'm creating my slides, there's no "frame" of any sort). If I try playing a ppt show, the same black frame pops up. It's really frustrating because I want to be able to use my Macbook when presenting.
How can I make this stop? When I play my slides I want them to take up the whole screen, not be surrounded by black!
SAm

If you're using 1024x768 or 800x600, you're going to get bars on the left an right because those are "normal" resolutions and your monitor is "widescreen". You'd have to use one of the "widescreen" resolution presentation sizes to get rid of those.

Black frames at the end of an exported file when converting from 60p to 24p

I have another export issue that I can't figure out.
I import footage I shot at 23.98fps (on a JVC HD100) using a Kona LH card at 59.94fps DVCPro HD, in which it has a 2:3 cadence. I need to make files that are actually 23.98p DVCProHD. Unfortunately, when I export in Final Cut from the 59.94 original, the new 23.98 file has all of the image, exported correctly, followed by a number of black frames such that the total number of frames in the exported file equals the number of frames in the original file. That is:
If the original 59.94 file was 3s long, that is 60 * 3 = 180 frames. The exported 23.98 file also has 180 frames, but only 3s of image = 3 * 24 = 72 frames, followed by 180 - 72 = 108 frames = 4s 12frames of black.
How can I prevent this from happening, and end up with an exported file that is (e.g.) just the 3s of image, and not 7.5s of which 4.5s are black?
It's true that I can manually clip this black off, but I need to do many clips as a batch, and would really not have to change one clip at a time. It is also true that I can do a batch in compressor, and that this process does not suffer this problem -- that is, there is no extra black -- however, there is another problem: the original 59.94 DVCProHD files are actually 1280x720 with square pixels; the files exported from FCP via the KONA DVCProHD codec maintain this true HD proportion, but the ones exprted through compressor (which does not appear to support the KONA LH implementation of DVCProHD as an option) have the size 960x720 with anamorphic pixels, and I would rather keep the original size. Thus, I would rather export from fcp. If anyone has any insight into how I might resolve this....
Thanks,
Robert Schaller

Thanks. If I understand you correctly, it does seem to export correctly if I paste the 59.94 clip into a 23.98 sequence (you can't nest sequences that have different time bases) and export from there, and it doesn't even have to specify square pixels, etc.: the AJA codec implementation seems to take care of that. There is no longer any extra black, so, per file, that gives the right result.
That, however, is only one part of the problem, though a significant part. Next is, I really would like to do this as a batch process, as I tend to have many clips to do at one time. As soon as I try any kind of batch export, I end up with one of two problems:
1) if I try to batch export from fcp, I'm back to having extra black frames, or
2) if I try to batch export with compressor, I get 960x720 files.
If anyone has any suggestions on how to get the right files in a batch, that would be the next step. Is fcp scriptable? And, if so, can you write a script that takes a clip, pastes it into a blank 23.98 DVCPro timeline, sets the correct in and out points (i.e, in at the beginning and out 1 before the end), exports it with a specified codec and time base, with a name based on the source clip, and then repeats that as needed?
Thanks for any input --
Robert Schaller

Black frame around icons when highlighted - double commands under the apple

when anything highlighted with a mouse click a black frame appears - also there are double commands under the apple menu - example
shut down
shut down
restart
restart
I did every trick I could think of - safe, single user, open firmware reset-all, account cache, disc utility, - only one account is effected, other accounts are ok - Monday was first time, I was 1 hour away form rebuilding account when the problem went away, on its own - this morning its back on a different machine, again just one account - G5 running 10.4.8 - any ideas?

Turn off
SystemPreferences>UniversalAccess>Seeing>VoiceOver
While you're at it, go to the Keyboard&Mouse preferences>KeyboardShortcuts and uncheck the VoiceOver shortcut (Cmd-F5)

Black frame added to my video when exporting...

I just knocked together a simple 3 minute video last night and used the share to vimeo option. For starters I don't like how this option doesn't offer to save the video locally too, and also doesn't really give you any progress updates once uploading is being done.
Anyways the footage is online and looks pretty good, however I noticed in one part there is a black screen for a frame.
I wondered if it could be my camera, so I've just checked the raw footage tonight, the original clip has no such problem.
I checked the project within FCPX and it doesn't show it there during live playback.
Finally i downloaded the full original version back off vimeo (see my earlier point about not getting a local copy!!) and checked that to see if it was perhaps vimeo's transcode that went wrong. Sadly the black frame glitch is present in the original uploaded file.
So yeah, source is fine, editor displays it fine, the stitched together movie has been given this black frame.
Not massively impressed, surely the exported output should be the main priority.
Has anyone else experienced any problems with the output from FCPX ?

how about if you just export to quicktime movie locally? Do you see the black frame then? You can also export to quicktime and select h264 as the output format, then you should be able to upload that file to vimeo. Extra step but the share to vimeo might be buggy.
Another thing to try is to delete all your render files (both event and project). Let things re-render and try the share to vimeo again.

Black frame flash when cross-fading still photographs

Hi, thanks for theuseful answers to questions. I have not seen this one, forgive me if it is somewhere. I am in iMovie HD 6.03 with a MacBook Pro.
When I cross-dissolve two still pictures ( with Ken Burns Effect on) I am left with a flash on the incoming picture, near the beginning. It is a black frame I can't remove, because doign so will un-render the dissolve! What a Catch 22, adn what a weird glitch!
I guess the frame comes in where the transition ends, but why would it do that? It is very evident when I play the series of crossfaded stills, it comes out as a big flash on each incoming pic. Does anyone have any workarounds or suggestions for applying the crossdissolve in a different way to avoid this? Or a cosmetic fix? Or maybe I just fade out and back in, what a drag for a whole bunch of pix.
thanks in advance,
maynemoon.
thanks so much.

Hi maneymoon:
Welcome to discussions!
If you delete the transition, you can always put it
back in without any problems.
Sue
Thanks for the welcome, Sue! I am indeed new, but not new to Macs and audio. But this is my first iMovie experience.
As to your answer, yes, I know I can delete the transition and re-apply, but when I reapply it, I still have the extra frame problem no matter what. ( I was trying to manually remove the extra black frame the transition left me with)
I am mainly wanting not get this black flash when I do a crossfade between two still pictures, or why I am getting it at all.
I want to use cross-dissolve transitions between the pictures, but can't get rid of the danged flash! thanks.

Black frame when cropping raw

Similar Messages

Maybe you are looking for