Black/gray problem in PDF exports from AI... MADDENING

I posted this in the Illustrator Forum here, but I worry I may have put it in the wrong place since it's fundamentally a PDF issue. Any thoughts?
http://forums.adobe.com/thread/451331?tstart=0
Jeff

Illy was the correct forum. You could have posted in the ID forum since the problem manefests itself when the pdf is placed in ID. However, no part of the problem involves Acrobat so this is really the wrong forum.

Similar Messages

Problem printing pdfs exported from IDCS3 to hp color laserjet 2550L

Since upgradingn to IDCS3, whenever I print a pdf exported from ID to my hp color laserjet 2550L, the graphics print with a red overlay and other colors change as well (black type prints brown, blue prints maroon). If I print the file to a .ps file, then distill it, I don't have the problem. If possible, I prefer to export because it's quicker. Is there a fix to this?
Thanks in advance!

Check the HP site for a newer driver for your printer.

Big problem with PDF export from CS4

Create a document with facing pages. Then place a rectangle or any other object on the master through the whole spread. Place the text or any other object on the master over the first rectangle on the both pages. Now, when exporting pdf, the text on the left pages is disappeared becaouse it covered by the copy of the rectangle. The variation of the problem is when using any tansparencies, then they become "less transparent" on the left pages because of this strange dublicating.
There is an archive in attachment that contains indd and pdf files with this problem.

Thanks, it works, but bug is still bug. In some cases it's impossible to do this, for example my recent case: it was text with huge outer glow on master pages. Outer glow from right page dublicates to the left and covered left text, and there's no way to move effect to another layer separately. The solution was to detach these texts from masters, but it's also unhandy solution.
It's hard to detect such cases unless it happen with big elements.

Trouble with PDF Export from ID CS6

I am having the following problem with PDF exported from an ID CS6 document. I have a couple of pages where a b&w photograph is partly covered by a non-wrapping text frame and in that text frame there is blue text. In ID it looks like this:
It also looks like this in the exported PDF in Apple Preview.app and for most of these pages they also look good in Acrobat Pro. But two are giving me trouble. They look like this:
and sadly, they also look that way when Ingram tries to use them. I export using the typical print format PDF/X-1a:2001
I have a minimal ID document that shows the problem with 3 such pages, one with the problem.

Select one of the troublesome objects and open the attributes panel as well as the effects panel.
Give us a screenshot.

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?
Windows 7 64
PC

everything works on a laptop (

PDFs exported from InDesign cannot be printed

Our Marketing Manager is using Adobe InDesign and exports her documents to PDF. These PDFs won't print in any of our printers in the office. It spools and then gets stuck and it actually makes our HP Coloured Laser Printer throw an error (error 79) and we'll have to restart the printer due to this error. We can print other documents and other PDFs in the printer so we know it's not a printer driver issue. In fact, we have isolated the problem to only PDFs exported from InDesign. Even if we create a blank document or add just text from InDesign and export it to PDF it still won't print. Really odd.
**I also posted this in the InDesign thread but was asked to post it here too. I tried printing the document using Adobe Acrobat and Adobe Reader with no luck. We tried printing directly from InDesign but it is inconsistent, sometimes it will print but most of the time it does not.

Hmm. Yeah. The ID forum may be more help. Especially if it's also a problem in ID.
My first suspect would be corrupt fonts or possibly an image file. Can you create a blank ID file with no text (maybe insert just an image or something that isn't on any of the other ID files) pdf it and print it?

Font Embedding Question in PDF exported from PageMaker v7

I am having difficulty embedding the majority of my fonts in PDFs exported from PageMaker v7. When exporting to PDFs, a "cannot embed font" error is generated.
Technical Details:
The fonts I have are ALL LEGAL, and were purchased with complete licenses when required.
The fonts properties show them to be completely embedable, with no restrictions in terms of installation, etc.
The fonts can be placed and embedded in PDFs from all other programs I've attempted this with (Illustrator, Acrobat, MSWord, WordPerfect, etc.).
Disclaimer:
Yes, I know PageMaker is old, and yes, I am in the process of upgrading to Creative Sutie (although, as an aside, it is extremely disappointing that even a token discount is not offered to those who have purchased every Adobe and MacroMedia software package in the past, but I digress...). However, several of my clients require PageMaker files (for a variety of reasons I won't go into here).
Thank you in advance for any advice on what might be the underlying problem.

When generating PDF output from Pagemaker, I've used 2 methods:
1. File>Export>PDF
This method works fine for a limited number of fonts (AGaramond for example), which is why I started this post. Bob Levine had suggested using Distiller instead.
2. File>Printer Styles>Acrobat
I usually used this method when an offset printer requires crop marks, since the other method does not provide an option for crop marks.
This opens a window with numerous options, the pertinent ones to my question are:
Printer: New 2002 PPD for Adobe PS Driver on file
PPD: Adobe PDF 3015.102
Postscript: Download Fonts (3 options):
     None
     True Type and Type 1
     True Type Only
When I choose download "True Type and Type 1", I get the same "cannot embed font" error if I use most of my fonts (with the exception of a few that work).
When I choose NONE for the option, the PS file is generated without errors.
Once the .ps file is generated, I then use Distiller 4 to open the file and output PDF file.
If I used "True Type and Type 1" for download font option, and the font does not generate an error, the PDF file is fine.
If I used "NONE" for download font option, when I open the PDF, it indicates that the fonts are embedded. However, since I do not download the font, I am nervous that this might cause problems when I go to an offset printer.
I do not print to a file using a printer driver (for example Linotype, Acrobat, etc.). The 2 processes I've used seem to be independent of what the default printer is on the operating system (XP).
Thanks!

PDF exported from InDesign missing background when opened in Illustrator

Hello, I am having a bit of a frustrating problem.
I'm working on graphics for a large project, and I have to get some of my files from InDesign into Illustrator (they are both CS5) for our printer.
I would have normally designed them in Illustrator but ALL my graphics are in InDesign and we just found out once we started on production that he needs AI and needs our trim path set up for our irregular shapes.
For MOST of the documents, its been pretty easy (exporting to PDF > opening in illustrator and making a cut path > saving as AI) however I have this one file that is making me lose my mind.
When I export it as PDF, it opens perfectly and looks normal in acrobat, and I also check it out in preview as well. The background shows up and everything. However when I open the PDF in illustrator it completely loses the background. I noticed it doing this before for a couple graphics, but I assumed that was because they had gradients drop shadows and transparencies and all that. This file has nothing weird except for a gradient grey background.
Help? I'm including some screenshots of whats happening in the hopes that you guys can help solve it.
So here we have me saving it, then opening it in Acrobat to check stuff out.
Now here is what happens when I open it in Illustrator:

Hi, Brie. I have been running into this issue for quite some time now. I also received the same response as you did. "Stop opening exported PDFs in Illustrator." This is an unsatisfactory answer for someone that works in the large format print industry that needs to preflight directly in the Illustrator program. I've done a ton of research and have been racking my brain for the last 2 years and have finally found sufficient workarounds for this issue. The downfall with these workarounds: all spot colors located in the gradients will convert to CMYK mixes. I'm still researching to see if there is a way to keep spot colors intact in these areas.
A little back story: InDesign is converting the gradients into something called NChannel. It enables more accurate handling of color blending by including additional dot gain and color mixing info. Both InDesign and Acrobat have the ability to display these elements whereas Illustrator, from what I’m finding, does not. Which is why we’re seeing gradient elements drop out when opened in Illustrator.
Workaround for CMYK Gradients
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: DeviceCMYK
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select DeviceCMYK in Color Spaces then click ok
Save the PDF
Workaround for 1 Spot Color in Gradients (Converts Spot Color located in Gradient to CMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the Spot that is located in the Gradient in Color Spaces then click ok
Save the PDF
Workaround for 2 Spot Colors in Gradients (Converts Spot Colors located in Gradient to CMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the DeviceN spot color that is located in the Gradient in Color Spaces then click ok
Save the PDF
Please try this and let me know if you have any questions! I'm always looking for new problems to solve! Good luck!
- Jenny

Adobe Acrobat Pro XI problems printing PDFs created from AutoCAD.

Just installed Adobe Acrobat Pro XI and am having problems printing PDFs created from AutoCAD. Printing other PDF created by MS Word works well. Had a similar problem in an earlier version of Pro. The fix I figure out then was to print the PDF file as another PDF. Using the second PDF to print to a plotter typically worked. It does not work for Adoabe Acrobat Pro XI.

Hi presottom
Please refer ; http://helpx.adobe.com/acrobat/kb/troubleshoot-pdf-printing-acrobat-reader.html
or
Let us know more details about it to help you better ?
What is the OS ?
is there any error message , etc .. ?

How do I transfer Adobe PDF Export from my old laptop to my new one?

How do I transfer Adobe PDF Export from my old laptop to my new one?

Install it like you originally did.

PDF export from ID6 creates disproportionately large PDF files

When I create a PDF export from ID6 the resulting file is always disproportionately large, even though the documents contain no images, are mostly text, all graphics are vector graphics and the document is one colour. Then, after trying lots of different settings, including the lowest possible, I cannot keep the file size reasonable.
I have also tried reducing the file size from within Acrobat 9, but this doesn't have any effect.
The only thing that works is exporting the same document as an EPS, importing the EPS into Illustrator, and then saving that EPS as a PDF from illustrator. This creates a document which has, I think, the correct file size in proportion with its content.
eg., 2 page ID6 doc to PDF = 12.8mb. Then the same 2 page doc saved as 2 separate EPSs, converted to PDFs and then combined as 1 document = 708kb!
This seems to be the only way of reducing the size of the PDF, but as you might expect, creates a huge bottleneck in my workflow.
Can anyone help?

You could try adjusting the transparency settings or the image settings.
Be certain you know what you're adjusting before you attempt this, though.
I've had some luck with just going to: Document > Reduce File Size...
I'll let some of the "real" experts chime in on this because I really don't
want to lead you down the wrong path here.
Thanks!
Theresa

Problem opening pdf file from an app built by Flash Builder 4.5

problem opening pdf file from an app built by Flash Builder 4.5

The iPad and iPhone have NEVER supported Flash and never will. In fact, Adobe is no longer distributing Flash builds to mobile devices.
Time to move on...

Problem with PDF export format

Using Mavericks and the latest version of Numbers, I have a problem when exporting a spreadsheet as a PDF. The spreadsheet is very simple and everything in it is formatted with a border around each cell (more like a 10 line/10 column table with borders). When I export it as a PDF the borders are there, but bolded, and the grid lines in the rest of the readsheet lines are also displayed in the PDF.
If I export the same spreadsheet to a PDF from Microsoft Word for Mac 2011, only the items that have borders show up, as I want it to be. Is there anyway to surpress the grid lines from showing up in the export from Numbers? All I want to display in the PDF are the cells with content that are bolded...not the grid lines in the rest of the spreadsheet.

OK, I've figured out how to hide the cell borders when I export to PDF, but still there is a single border around the entire page...about where the margins are. It's light gray, so obviously another grid line, but this one I can't figure out how to hide.

Single letters dropping out in PDFs exported from Indesign CS

We are having font issues in some of our magazine's advertisements which proved very costly last month. First let me describe the work flow.
We designed an ad in Indesign CS then exported it using the press setting in Indesign's PDF export option. Here the ad looked and printed fine. The ad was then placed in another Indesign file which was for the layout of one of our magazines. Here the ad still looked fine on screen and when printed out from Indesign. This next step is where the font issue occurs.
When we export the the final magazine's press ready Indesign file, through the PDF press setting in Indesign again, single letters in these problem ads drop out. For example all of the Ds' in the entire ad will be missing. So a sentence in the ad that read "Dirt is Dark" will read " irt is ark."
I am wondering if anyone else has had this problem occur and if they have a solution. The only thing I can think of is in the compression settings there is an option to compress text and line art. We are going to try to uncheck that box to see if it fixes the problem.
Thank you for you help,
Javin.

I realized, of course, that it does make a difference. If you don't have the fonts on your system, a frequent issue with incoming ads, you couldn't embed the full font at all. You need to be sure that ads generated in CS have fully embedded fonts, not subsets, or risk dropouts. It will only happen when more than one ad uses the same font, but different glyphs.

Problem with PDF export and embedded font (characters disappear)

Designer: Crystal Reports 2008 SP 2
Engine: CR4E 2.0 SP2 (runtime_12.2.203)
Hi there!
we found a problem in the pdf export. It seems like there would be a problem with the embedded fonts, the problem is as follows:
Rpt file with, for example only a text box which contains the german string " Änderungs Schlüssel ".
Export the Rpt file with CR4E to a pdf file.
When we open the pdf file in Adope Reader 8, the text appears to be correct,
but if we print the PDF file from the Adope Reader, the text changes to " nderungs Schl sselu201C,
here we are missing ther german umlaute.
When we open the file for example with an alternative PDF reader like Foxit Reader, there they are also missing.
After i found some posts here in the forum, there are people facing the same problem, since i couldn't find a solution in the forum, we build a little workaround for it that works for us.
For all of you that have the same problem here the workaround:
We used the IText JAVA library, this jar can can help as to fix the PDF file so the text is displayed correctly.
Here the code:
ReportClientDocument doc = new ReportClientDocument();
doc.setReportAppServer(ReportClientDocument.inprocConnectionString);
doc.open("C:\XY.rpt", OpenReportOptions._openAsReadOnly);
//... database logon,.....
InputStream inputStream = doc.getPrintOutputController().export(ReportExportFormat.PDF);
inputStream = PDFHealer.heal(inputStream);
//... write the stream some where

The helper class using IText:
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStream;
import com.lowagie.text.Document;
import com.lowagie.text.DocumentException;
import com.lowagie.text.pdf.PdfContentByte;
import com.lowagie.text.pdf.PdfImportedPage;
import com.lowagie.text.pdf.PdfReader;
import com.lowagie.text.pdf.PdfWriter;
public class PDFHealer
   public static InputStream heal(InputStream in) throws DocumentException, IOException
      try
         ByteArrayOutputStream out = new ByteArrayOutputStream();
         PdfReader reader = new PdfReader(in);
         // we retrieve the total number of pages
         int n = reader.getNumberOfPages();
         // step 1: creation of a document-object
         Document document = new Document();
         // step 2: we create a writer that listens to the document
         PdfWriter writer = PdfWriter.getInstance(document, out);
         // step 3: we open the document
         document.open();
         // step 4: we add content
         PdfContentByte cb = writer.getDirectContent();
         int i = 0;
         while( i < n )
            document.newPage();
            i++;
            PdfImportedPage page1 = writer.getImportedPage(reader, i);
            cb.addTemplate(page1, 0, 0);
         // step 5: we close the document
         document.close();
         ByteArrayInputStream ret = new ByteArrayInputStream(out.toByteArray());
         out.close();
         return ret;
      finally
         in.close();

Black/gray problem in PDF exports from AI... MADDENING

Similar Messages

Maybe you are looking for