Black Horiz. Bars on My Website Upload

Hi all,
I have a point and shoot that takes 720P (1280X720) video and they are saved to the SDHC Card as AVI files. I then save them to my desktop pc and import them into Adobe Premiere Elements 8 and arrange them on the timeline. My project settings are "NTSC-HDV-HDV720p 30". When I go to render and upload to my ftp directory on my web server, the final output has big black bars on the top and bottom of the video as if it were padding it for a regular NTSC 720X480 video file. The only way that I have been able to work around this is to go this route:
1: Share
2: Personal Computer
3: Adobe Flash Video
4: Select preset "NTSC Flash Video 8 700K"
5: Click the "Advanced" button
6: On the video tab, change the width and height to the aspect ratio that I am using such as 480 X 270
7: Click "OK" and save the preset to something meaningful
8: Click "Save"
9: Go find my FLV and upload it manually
Is there any way to save a preset to: Share, Online, My Website
Thanks...
Jeremy

Thanks for the G-Spot screen-cap. The HD 720p (1280x720) Preset should match, and the Square pixels matches in the PAR.
If you mean edit as in insert into the timeline and cutting a section here and adding an effect there and maybe even a nice little transition joining these two clips, then it already did that before I installed Morgan.
Then you had an MJPEG CODEC installed, though there can be differences between many of them. This happens on occassion, where say the Morgan will do better for one user, than the MainConcept, or the Lead.
All my footage is from one camera. There is nothing "dissimalar" about any of it.
This is my mistake. I obviously confused threads. There was another that I was working on, where the footage came from two different cameras, and one was an MJPEG CODEC. Sorry about that - my bad. Just ignore.
Looking at your next post with the screen-caps, it still looks like a mismatch between the footage and the Project Preset. However, based on what G-Spot reported, the use of an HD 720p Preset with that footage should take care of it. Your footage should fill the frame, and it does not. It almost looks like PAL footage in an NTSC Project, or similar mismatch. I'll go back and re-read all of the details, trying to keep my mind on one thread at a time.
Good luck,
Hunt

Similar Messages

Video conversion adds black horiz bars

I just converted a quicktime move to flash. It seem flash has
added thick black horizonatl bars to the top and bottom of the .swf
and .fla. What would cause this and how can I fix it?
Thx!

Is this with Flash Media Encoding Server?

How do I get black side bars on a full screen photo in iPhoto 11

How do I get black side bars on a full screen photo in iPhoto 11. It was black in iPhoto 09 and now it's a murky grey. I'm not talking about events or photo view where it's in preferences only full screen photo. Thanks

Go into iPhoto's Appearance preference pane and move the Background slider all the way to the left - black.
OT

How to get the black, talking bar to go away

how do I get the black, talking bar to go away and how do I refresh? Thanks

Welcome to Apple Support Communities
That's VoiceOver. To disable VoiceOver, press Command and F5 keys, or open System Preferences > Accessibility > VoiceOver, and disable VoiceOver

How to add a black censor bar to a face that moves with the face?

Please tell me how to do that
I have final cut pro x

Does it have to be a black censor bar? if not look at the Censor effect.
If it has to be a black bar. Make the bar using a Custom generator in Solids. Crop it to whatever size you want using the Crop function in the Viewer. Use the Transform function in the Viewer to position. You can keframe the crop and transform functions to animate the bar as needed.

Black vertical bar with lines on Macbook pro screen Appeared out of nowhere

I was working on my computer late at night. Like always.
I went to bed, and left the computer on in it's screen saver , as I always do.
When I woke up I had a black vertical bar on the screen about 1 1/2 inch thick with some flickering lines next to it.
here is what it looks like: http://www.talkcitee.com/ourspaceimages//2coolcode/2coolcode.jpg
I don't believe this to be a memory problem, I can take snapshots of the full screen, and I can hook up an external monitor with no problem. Also restarded PRAM plenty of times, etc.
But this black bar appeared out of nowhere. As if one way my screen decided it was going to blow out on me out of nowhere. I've had this MacBook for 2 years.
Question is, do you think the problem is:
a) the screen
b) connection / short problem to the screen inside the macbook
I hope it's B , because they told me it would cost $800 to replace the screen which is stupid cus I can get a new macbook pro for less than that.
I think there is a connectivity problem with the hardware , possibly a short, or something messed up with the wires or pins that link to the screen.
I noticed after repeatedly opening and closing the macbook, there were some changes in the small flickering lines next the big bar, and some of them turned solid black.
Has this happened to anybody else before?
Message was edited by: Uhuru83

Usually what happens is that over time the cable comes loose from the back. This happens because the enclosure within the hinge housing is quite tight and the LVDS cable has little room to move around. Because of the frequent opening and closing on the lid, the cable starts to move out of place try opening and closing it a few times and push it back very gently. You might see the line disappear or decrease slightly.

I downloaded an iBook and was reading it, closed it, tried to reopen it, but it just shows on my shelf with a black load bar at the bottom as if it has to load. ???

I downloaded an iBook and was reading it, closed it, tried to reopen it, but it just shows on my shelf with a black load bar at the bottom as if it has to load. ???

My first step would be to get rid of "Norton protection". Boot from your OS 10.6 disc, navigate through your hard drivve and trash anything that is Norton. Empty the trash.
Next, run Disk Utility and ask it to repair the hard drive.

I have a black moveable bar on my screen

I have a black moveable bar on my screen that talks to me. It tells me everything I am doing, and it's so annoying! How do I turn it off?

It looks like this.

There is a black horizontal bar right above the tabs

there is a black horizontal bar right above the tabs since I installed the latest version of firefox.
== This happened ==
Every time Firefox opened
== after the latest version was installed

This issue can be caused by a plugin or an extension that is not compatible with Firefox 3.6 and isn't working properly anymore.
A toolbar like the "ZoneAlarm Spy Blocker Plugin Stub for 32-bit Windows" and other toolbars like "Ask.com" or "My Web Search" can cause this issue.
See http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
See also [[Troubleshooting plugins]]

How to add black censor bars to image?

I need to use an effect where black censor bars cover up a part of my picture. How do I do this? Thanks.

If you are using FCP (mmmh what software are you using? I noticed that you are on W. XP) use BORIS vector shape filter from filters tab.
Alternatevely create a simple black rectangle in Photoshop, export it to FCP ( use composite mode to get rid of background if you get one) and rotate and resize it in FCP using motion tab tools
g
PS. The one above is a quick and general suggestion, post back if you need extra help, one of us will help you.

FF will not hold the theme I like, it changes to a black tool bar. I have ff 7.0.1

I use red cat-green flavor and it keeps changing to a black tool bar that is unreadable. I use FF 7.0.1 with W 7.

Do you have enabled auto-fill for the location bar?
You can check the pref browser.urlbar.autoFill on the about:config page.
You can also make the protocol visible.
You can set the pref browser.urlbar.trimURLs to false on the about:config page to see the http: protocol.
You can set the pref browser.urlbar.formatting.enabled to false on the about:config page to disable the highlighting of the domain and see the full URL more clearly.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=678352 bug 678352] - 'h' entered as first letter in location bar is overwritten with 'w' when browser.urlbar.autoFill is true

Black Bars on Sides & Poor Upload to YouTube

        I have already tried converting my Mp4's from my camera to AVI and this will resolve the black bars but the end result is still poor video once uploaded... I get the little red x in the lower left hand corner about poor display quality (see picture at bottom) If I work with the original Mp4s and leave the Black Bars on the side the videos looks fine... please help. The AVIs are taking too much space once I convert them from Mp4 so I would like to leave that option out of this topic, unless someone can tell me how set Super or Prisim up to keep the file size the same when converting or how to convert an Mp4 to AVI in a smaller format that is usable by Premiere.
These are the best specs I can give you guys after reading How To Ask A Question from Hunt....
*   WINDOWS 7 64BIT os
*   Adobe Project Settings - HD 1080i 30 presently
                       HD 1080i 30 (60i) formerly
*   Adobe Settings - Default after a clean install of Windows 7
*   Files - Working With raw Mp4 HD 1080/60i (all the same from the same camera)
    * w 1920 x h 1080
    * data rate 17029kbps
    * 59 fps
    * Audio bitrate 128 kbps
    * 2 channel stereo
    * 48 kHz
    * videos are about 500 mb in size each
MY CAMERA
    Signal Type       Signal Type       NTSC
    Storage Media     Storage Media     SDHC slot
    Image Sensor     Sensor Type     CMOS
    Sensor Size     1/4.1"
    No. of pixels     4.7M
    Lens             Optical Zoom     20x (22x)
    Digital Zoom     220x
    Display             Main Screen     No. of pixels     230K
    Video Recording      Recording Format     H.264 HD
    Memory Application     Memory Application     Compatible Card     SDHC
MY COMPUTER
    * Gateway DX4300-03
General
    * Type Personal computer
    * Product Form Factor Mini tower
    * Width 7.1 in
    * Depth 17.3 in
    * Height 16.3 in
    * Weight 24.9 lbs
    * Desktop type Gaming system
Processor
    * Type AMD Phenom X4 9750 / 2.4 GHz
    * Multi-Core Technology Quad-Core
    * 64-bit Computing Yes
    * Installed Qty 1
    * Max Supported Qty 1
Cache Memory
    * Type L2 cache
    * Installed Size 2 MB
    * Cache Per Processor 512 KB ( 4 x 512 KB )
Mainboard
    * Chipset type AMD 780G
RAM
    * Installed Size 8 GB / 8 GB (max)
    * Technology DDR2 SDRAM
    * Form Factor DIMM 240-pin
    * Configuration Features 4 x 2 GB
Storage Controller
    * Type Serial ATA - Integrated
    * Controller interface type Serial ATA-300
Storage
    * Hard Drive 1 x 1 TB - Standard - Serial ATA-300 - 7200 rpm
    * Hard Drive 2nd Drive Simpletech 500gb drive (speed unknown) USB 2.0
    * Hard Drive 3rd Drive WD My Book Essential External Drive 1TB USB 2.0
Optical Storage
    * Type DVD±RW (±R DL) / DVD-RAM
    * Disc Labeling Technology Labelflash Technology
Monitor
    * Acer H203H
    * Sylvania Flatpanel TV extended
Multimedia Functionality
    * TV tuner type Dual digital/analog TV
Graphics Controller
    * NVIDIA GeForce GT 220 - updated yesterday
    * Graphics Processor / Vendor ATI Radeon HD 4650 (not in use)
    * Video Memory 1 GB
Audio Output
    * Type Sound card - Integrated
    * Sound output mode 7.1 channel surround
    * Audio output compliant standards High Definition Audio
    * Speaker(s) 2 x Right / left rear channel
Networking
    * Networking Network adapter - Integrated
    * Wireless LAN Supported Yes
    * Data Link Protocol Ethernet , Fast Ethernet , Gigabit Ethernet
Expansion / Connectivity
    * Expansion Slots Total (Free) 1 ( 0 ) x Processor , 4 ( 0 ) x Memory - DIMM 240-pin , 1 ( 1 ) x PCI Express x1
    * Interfaces 8 x Hi-Speed USB - 4 pin USB Type A ( 4 front, 4 rear ) ,
      1 x Keyboard - Generic - 6 pin mini-DIN (PS/2 style) , 1 x Mouse - Generic - 6 pin mini-DIN (PS/2 style) ,
      1 x Display / video - VGA - 15 pin HD D-Sub (HD-15) , 1 x IEEE 1394 (FireWire) ,
      1 x Network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 , 1 x Modem -
Phone line - RJ-11 , 1 x Display / video - HDMI - 19 pin HDMI Type A , 1 x Storage - Serial ATA-300 - 7 pin Serial ATA
   *note the red 'X' in the lower left hand corner, as well as the black bars. This is how it looks when directly imported into Premiere (mp4 file from the camera)

1. Open Premiere Elements 8.0.1 and set the project preset (new project dialog) = PAL AVCHD Full HD1080i25.
2. In the program, Edit Menu/Preferences/General, have a check mark next to "Default Scale to Frame Size".
3. Right click the Edit Mode Monitor, select Magnification, and have the set on "Fit".
4. Using Premiere Elements' Get Media/Files & Folders, import your AVCHD 1920x 1080 16:9 video into the program. (You will see your video in the Organizer.)
5. Drag your video from the Organizer to the Timeline. Are you seeing a 4:3 version of it in the Edit Mode Monitor?
6. If so, click on the Project Tab in the row below the active Organize (Blue) Tab to bring up the Project Media View.
7. In the Project Media View, right click your video in the list to bring up the Interpret Footage dialog.
8. In the Interpret Footage dialog, under Pixel Aspect Raio, dot the "Conform to:" and change the setting = Square Pixels (1.0). After you click OK to that, see what your video now looks like in the Edit Mode Monitor.
Miscelleanous
1. You can also use the Interpret Footage dialog for Frame Rate considerations.
2. Although the gspot read out does not give a reading for PAR (Pixel Aspect Ratio), the PAR can be calculated from the SAR and DAR values given since PAR = DAR/SAR and, in your case, 1.778/1.778 = 1.0. The DAR is Display Aspect Ratio and the SAR is Storage Aspect Ratio.
3. What is the duration (seconds, minutes, hours) of the video that you have been trying to use in Premiere Elements 8.0.1. You are working with AVCHD which is a very resourve demanding format, and it appears that you have 2 GB RAM installs that probably translates in much less available and you do not say how much free hard drive space your computer has. But, if the video in question is only of a few seconds duration, we should be able to work through this pixel aspect ratio issue.
courtesy of AT Romano...

Black bars appearing on website while browsing with iOS 6

I have a WP site and when I browse it using my iOS 6 iPhone it shows black bars at the bottom of each post.
Others using iOS 6 also have the same issue on my site but those using older iOS do not see the black bars...
Anyone else having this problem with Safari in iOS 6?
Thanks

Yes I see this too. Using the WiFi hotspot does not have this problem but is a poor workaround. I also upgraded both devices to iOS 6, and tried resetting network settings on the hotspot device, to no avail. I filed a bug report at http://bugreporter.apple.com , you may wish to do the same.

Horizontal menu bar appears vertical after upload

Hi,
I am new using Dreamweaver CS4 and have encontered a problem. I have made a nice looking (I think so) horizontal menu bar on my web project and it works/looks fine in the "LIve View" of DW. However on the web page after upload it looks like this:
http://www.competenciagroup.com/ColombiaTravel/index.html#
It has changed from horizontal to vertical and all formats are gone. Anybody have a clue?
Thanks in advance,
Ivan

The Spry stylesheet cannot be found.
The Spry CSS should be:
http://www.competenciagroup.com/SpryAssets/SpryMenuBarHorizontal.css
In your local working folder on your computer, is the Spry folder inside the working folder, or is it outside of that folder. The Spry Assets folder should be inside the folder where all your other html/image files are. The link in your html pages, shows that the Spry folder goes one level deeper than that.
The paths to both the spry css and the spry js file are wrong, you need to fix that and then upload the files again.
Hopefully you are working within a Defined Dreamweaver site - this is a very important first step before working on your site.
Define a site:
http://kb2.adobe.com/cps/140/tn_14028.html
Via the File Panels window, move the spry folder into your working folder *do not do it via windows explorer* it has to be done through Dreamweaver so that DW can correctly the file links. If everything goes correctly, you should be asked whether you want to update any links, so yes.. and hopefully the links will be corrected.
Usually the link should look like this if the Spry folder is inside your working folder structure:
<link href="SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css" />
Your link however shows as:
<link href="../../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
This means that the browser is trying to find the files one level down from where you website files are stored on the server.. and it's not there.

Clearing Spry Menu Bars within the website

How do I clear the spry menu bar values within a website. I am trying to create a horizontal spry menu bar on one page and then another horizontal one on another page. It keeps the same values everytime I create a new page. How do I clear the values for each page?
Thanks!

heatherfar69 wrote:
I am redesigning the website in the test environment using a new page. While doing so I am redoing the spry menu bar. It changed the spry menu bar in the original website (production environment). I would like to have the spry menu's be separate. How do you create separate spry menu bars for a situation as such?
Thanks!
If you are editing locally it should not overwrite your remote file unless you have the option "Automatically upload files to server on save" checked off. If that is the case you should uncheck that box.
If you want to further separate the old version from the new version, the only other method is to just create a new site. Even if you start with a duplicate of the existing site. Then you don't risk the chance of overwriting the existing files on the server.

Black Horiz. Bars on My Website Upload

Similar Messages

Maybe you are looking for