Black + In Numerical Fields
Alright....so I have a little hiccup with numerical fields. I have a field set up in a subform and set to expand to fit the inputted values. When I type a value in though and the box expands, a black small box with a "+" in it appears covering up part of the number. Any idea why this happens? The subform is set to flow, everything else works fine, and the box appears to expand to the right size minus this box. Any assistance, as always, would be greatly appreciated. Thank you in advance!
Hi,
The plus (white on black) indicates that the contents have overflowed the field. If this is not he case because you have set the field to expand and it is doing this OK, then Acrobat may just "think" that the contents are overflowing.
I can't replicate your issue. Someone may be able to help you if you post the form to the forum.
N.
Similar Messages
-
Is it possible to use the status of a checkbox to change the fillcolor of a numeric field?
I have read through most all of the threads, but found none pertaining to my specific question. I would like to change the fillcolor of a numeric field based upon the status (on/off) of a checkbox located on a different page. In other words, if the checkbox is checked I want the numeric field to be yellow with a solid (thin) black border. I have tried:
If (CheckBox1.rawValue="1")
{this.fillcolor="R,G,B";} else
{this.fillcolor="250,250,250"};
I haven't gotten the correct RGB values yet for the color I am using, that is why the script has "R,G,B"
I am pretty new at javascript and have been learning a lot from the forums, but I just can't seem to figure this one out. Any help would be greatly appreciated. ThanksGive this a go...
// form1.page1.cb::click - (JavaScript, client)
if (this.rawValue == 1) {
xfa.resolveNode("form1.page1.nf.ui.#numericEdit.border.fill.color").value = "255,255,0";
form1.page1.nf.border.edge.color.value = "0,0,0";
else {
xfa.resolveNode("form1.page1.nf.ui.#numericEdit.border.fill.color").value = "255,255,255";
form1.page1.nf.border.edge.color.value = "255,255,255";
Don't forget to make your form a dynamic form.
Steve -
I have set a numeric field with following things:
Object > field > patterns > display > $1234.21
It works well but when I set expand fit width, it expands but not show "$" and " .00". It just show like 12340000000000.
Or sometimes It shows black + sign right bottom corner though it shows correct format. Where have I made a mistake?
In addition, I have set float type data format.Hi, sorry I misunderstood your question.
1. remove the edit pattern
2. Add this script in the enter:Event
this.rawValue = null;
3. Add this script in the exit:Event
if (this.rawValue === null)
this.rawValue = 0; -
What is the initial value for a numeric field ??
Can someone tell me what the INITIAL VALUE FOR A NUMERIC FIELD is ?? Thank you
Rod.Using the following...
class MyClass
int myvar1; // Default initial value
int myvar2 = 3; // Default initial value and default value
MyOtherClass myclass1; // Default initial value
void doit()
int mylocal1; // No value
MyOtherClass myclass2; // No value
All number member variables, like myvar1 start off with andefault initial value which is zero. For booleans this is false. Object reference variables, like myclass1, have a null value.
All local numeric variables are considered undefined. So mylocal1 and myclass2 are undefined. Before you can use them you must explicitly provide a value.
Finally note that myvar2 will have two values during class instantiation. Initially it will have a value of zero. Sometime later it will have the value of 3. (When that happens is very definitely outside the scope of what this forum covers. If you want to know then ask in the advanced forum.) -
Null values in Numeric fields of Datasets
I am wondering if anyone has run into this problem before and
checking to see if anyone has an elegant solution.
I have a rather large data set. (actually 5 of them on a
single page) I am sorting certain columns in a table as numbers so
i assign the variable " ds1.setColumnType("somenumbercolumn",
"number")" In most cases Spry works great and it sorts by numbers
properly. The problem is some of the fields in the XML file are
null and I am trying to sort them as a number. Spry actually
adjusts for this (as far as i can tell) and treats them like a 0
which isn't exactly ideal considering there are real zero values in
the data. I know spry doesn't currently format numbers:
So here is my question. Does anyone one have a solution to
fixing null values in a table so that it is still sortable but
doesn't display a "0" and instead displays something like "--" or
whatever. I have the option of editing the XML file as well, but I
still need the table to sort by number.
If not null values, how about non numeric fields which can
still be sorted in a numeric column?Hi,
We have an old post that raised a similar problem with yours.
The post can be found
here
For you situation, you should add an if condition for the
rows that have 0 and to add a custom string instead 0.
for (var i = 0; i < numRows; i++)
if(rows
[ "field_name"] == 0)
rows[ "field_name" ] = '--';
Hope this helps you,
Diana -
Total for a Numeric field in ALV Grid display
Hi all,
I am not getting the Total for a Numeric field in ALV Grid output. What might be the problem.
Regards,
Balavardhan.KCheck this code for subtotals and totals..
REPORT ZYFI_REPT007
NO STANDARD PAGE HEADING
LINE-SIZE 300
LINE-COUNT 50
MESSAGE-ID ZYFI.
TABLES : COOI, " Commitments Management: Line Items
LFA1, " Vendor master (general section)
VBEP,
RKPLN.
TABLE TYPES AND INTERNAL TABLES *
DATA : BEGIN OF TYP_COOI ,
OBJNR LIKE COOI-OBJNR,
SAKTO LIKE COOI-SAKTO,
MEGBTR LIKE COOI-MEGBTR,
MEINH LIKE COOI-MEINH,
WKGBTR LIKE COOI-WKGBTR,
REFBN LIKE COOI-REFBN,
RFPOS LIKE COOI-RFPOS,
SGTXT LIKE COOI-SGTXT,
BUDAT LIKE COOI-BUDAT,
LIFNR LIKE COOI-LIFNR,
END OF TYP_COOI.
DATA : BEGIN OF TYP_LFA1 ,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF TYP_LFA1.
DATA : BEGIN OF IT_OUTTAB OCCURS 0,
OBJNR LIKE COOI-OBJNR,
SAKTO LIKE COOI-SAKTO,
MEGBTR LIKE COOI-MEGBTR,
MEINH LIKE COOI-MEINH,
WKGBTR LIKE COOI-WKGBTR,
REFBN LIKE COOI-REFBN,
RFPOS LIKE COOI-RFPOS,
SGTXT LIKE COOI-SGTXT,
BUDAT LIKE COOI-BUDAT,
LIFNR LIKE COOI-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF IT_OUTTAB.
DATA : IT_COOI LIKE TYP_COOI OCCURS 0 WITH HEADER LINE,
IT_LFA1 LIKE TYP_LFA1 OCCURS 0 WITH HEADER LINE.
*-- ALV Declarations
TYPE-POOLS SLIS.
DATA: IT_EVENTS TYPE SLIS_T_EVENT,
GS_EVENT TYPE SLIS_ALV_EVENT,
wa_fldcat type slis_fieldcat_alv.
DATA: S_LAYOUT TYPE SLIS_LAYOUT_ALV,
GT_PRINT TYPE SLIS_PRINT_ALV.
DATA: IT_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: IT_SORT TYPE SLIS_T_SORTINFO_ALV.
DATA: V_REPID LIKE SY-REPID.
SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_KOKRS FOR COOI-KOKRS NO-EXTENSION NO INTERVALS,
" Controlling Area
S_BUKRS FOR COOI-BUKRS NO-EXTENSION NO INTERVALS,
" Company code
S_GJAHR FOR COOI-GJAHR NO-EXTENSION NO INTERVALS,
" Fiscal Year
S_OBJNR FOR RKPLN-AUFNR MATCHCODE OBJECT ORDE,
" Internal order
S_SAKTO FOR COOI-SAKTO MATCHCODE OBJECT KART,
" Cost Element
S_BUDAT FOR COOI-BUDAT, " Debit Date
S_LIFNR FOR COOI-LIFNR. " Vendor
SELECTION-SCREEN END OF BLOCK B1.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
*-- Read data
PERFORM GET_DATA.
E N D O F S E L E C T I O N *
END-OF-SELECTION.
*-- Process the data and prepare the output data
PERFORM CALCULATE_FINAL_INFO.
*--Display Report output
PERFORM DISPLAY_REPORT.
FORM CALCULATE_FINAL_INFO *
Process the data and prepare final internal table *
FORM CALCULATE_FINAL_INFO.
DATA : L_OBJNR LIKE COOI-OBJNR.
SORT IT_LFA1 BY LIFNR.
DELETE ADJACENT DUPLICATES FROM IT_LFA1 COMPARING LIFNR.
LOOP AT IT_COOI.
L_OBJNR = IT_COOI-OBJNR+2(20).
SHIFT L_OBJNR LEFT DELETING LEADING '0'.
IF L_OBJNR IN S_OBJNR.
READ TABLE IT_LFA1 WITH KEY LIFNR = IT_COOI-LIFNR.
IF SY-SUBRC EQ 0.
IT_OUTTAB-NAME1 = IT_LFA1-NAME1.
ENDIF.
MOVE-CORRESPONDING IT_COOI TO IT_OUTTAB.
CLEAR IT_OUTTAB-OBJNR.
IT_OUTTAB-OBJNR = L_OBJNR.
APPEND IT_OUTTAB.
CLEAR IT_OUTTAB.
CLEAR IT_LFA1.
CLEAR L_OBJNR.
ENDIF.
ENDLOOP.
ENDFORM.
*& Form GET_DATA
Fetch the Data from the table COOI and LFA1
FORM GET_DATA.
SELECT OBJNR
SAKTO
MEGBTR
MEINH
WKGBTR
REFBN
RFPOS
SGTXT
BUDAT
LIFNR
FROM COOI
INTO TABLE IT_COOI
WHERE BUDAT IN S_BUDAT
AND LIFNR IN S_LIFNR
AND KOKRS IN S_KOKRS
AND BUKRS IN S_BUKRS
AND GJAHR IN S_GJAHR
AND SAKTO IN S_SAKTO.
IF SY-SUBRC EQ 0 .
Get the Vendor name from LFA1
SELECT LIFNR
NAME1
FROM LFA1
INTO TABLE IT_LFA1
FOR ALL ENTRIES IN IT_COOI
WHERE LIFNR EQ IT_COOI-LIFNR.
ELSE.
MESSAGE I999 WITH TEXT-013.
ENDIF.
ENDFORM. " GET_DATA
*& Form DISPLAY_REPORT
Display the output
FORM DISPLAY_REPORT.
PERFORM BUILD_CATALOG.
PERFORM FRM_PREPARE_EVENT_LIST TABLES IT_EVENTS.
IF NOT IT_OUTTAB[] IS INITIAL.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = IT_FLDCAT
IT_SORT = IT_SORT
IT_EVENTS = IT_EVENTS
TABLES
T_OUTTAB = IT_OUTTAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ELSE.
MESSAGE I999 WITH TEXT-013.
ENDIF.
ENDFORM. " DISPLAY_REPORT
*& Form BUILD_CATALOG
Build the Field catalog for the ALV Report
FORM BUILD_CATALOG.
DATA: V_INDEX LIKE SY-TABIX.
V_REPID = SY-REPID.
DATA: LS_SORT TYPE SLIS_SORTINFO_ALV.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = V_REPID
I_INTERNAL_TABNAME = 'IT_OUTTAB'
I_INCLNAME = V_REPID
CHANGING
CT_FIELDCAT = IT_FLDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE IT_FLDCAT WITH KEY FIELDNAME = 'WKGBTR'
TABNAME = 'IT_OUTTAB' INTO WA_FLDCAT.
IF SY-SUBRC EQ 0.
WA_FLDCAT-DO_SUM = 'X'.
MODIFY IT_FLDCAT FROM WA_FLDCAT INDEX SY-TABIX.
ENDIF.
READ TABLE IT_FLDCAT WITH KEY FIELDNAME = 'OBJNR'
TABNAME = 'IT_OUTTAB' INTO WA_FLDCAT.
IF SY-SUBRC EQ 0.
WA_FLDCAT-SELTEXT_L = 'Order'.
WA_FLDCAT-COL_POS = 1.
WA_FLDCAT-DDICTXT = 'L'.
MODIFY IT_FLDCAT FROM WA_FLDCAT INDEX SY-TABIX.
ENDIF.
LS_SORT-FIELDNAME = 'OBJNR'.
LS_SORT-SPOS = 1.
LS_SORT-UP = 'X'.
LS_SORT-SUBTOT = 'X'.
APPEND LS_SORT TO IT_SORT.
ENDFORM. " BUILD_CATALOG
*& Form FRM_PREPARE_EVENT_LIST
Build the Events
FORM FRM_PREPARE_EVENT_LIST TABLES IT_EVENTS TYPE SLIS_T_EVENT.
CLEAR GS_EVENT.
GS_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
GS_EVENT-FORM = 'TOP_OF_PAGE_REPORT'.
APPEND GS_EVENT TO IT_EVENTS.
ENDFORM. " FRM_PREPARE_EVENT_LIST
TOP OF PAGE
FORM TOP_OF_PAGE_REPORT.
CALL FUNCTION 'Z_YREPORT_HEADER'
EXPORTING
DL_TITLE = SY-TITLE
DL_REPID = SY-CPROG
DL_LINSZ = SY-LINSZ
EXCEPTIONS
OTHERS = 1.
ENDFORM. " FRM_TOP_OF_PAGE_REPORT
*& Form USER_COMMAND
Drill Down Functionality to Call the Transaction ME23
FORM USER_COMMAND USING P_UCOMM LIKE SY-UCOMM
P_SELFIELD TYPE SLIS_SELFIELD.
DATA : L_INDEX LIKE SY-INDEX,
L_REFBN LIKE COOI-REFBN.
L_INDEX = P_SELFIELD-TABINDEX. " holds the selected table index
CLEAR L_REFBN.
CASE P_UCOMM.
*-- On Double Click
WHEN '&IC1'.
CLEAR L_REFBN.
*-- Read the Current Line
READ TABLE IT_OUTTAB INDEX L_INDEX.
IF SY-SUBRC EQ 0.
L_REFBN = IT_OUTTAB-REFBN.
IF NOT L_REFBN IS INITIAL.
*-- Set the BES Paramater Id to the Current line Purchase Order Number
SET PARAMETER ID 'BES' FIELD L_REFBN.
*-- Call the Transaction Purchase Order Display with the above PO Number
CALL TRANSACTION 'ME23' AND SKIP FIRST SCREEN.
ENDIF.
ELSE.
MESSAGE E999 WITH TEXT-014.
ENDIF.
ENDCASE.
ENDFORM. " USER_COMMAND -
Connecting selection of radio button to a text or numeric field
Hi. I am using LiveCycle Designer 8.0 and I am trying to define object properties that will allow the selection of a radio button to populate in a numeric data field at the bottom of the page. I was able to write the script to have that happen with drop-down lists, but I can't figure out how to write the script for the radio button. I also don't know if the script is supposed to apply to the radio button itself or the numeric field where I want the result to show-up. Can you please help me with some sort of an example script? Thanks.
Hi Jen,
I would recommend that you amend your workspace in Designer. You can show/hide palettes from the Window menu.
Here are some pointers (which are optional):
This is the hierarchy palette and is very handy when working with forms. You can select objects quickly and drag objects around.
This is the Object palette, which makes it easy to drag objects onto the page.
The main space with tabs for Design View, Master Pages, XML Source (you should not need this) and Preview.
You can select objects in EITHER the page or the hierarchy view and then change properties in other palettes.
The Script Editor is very important when you start to add functionality to your form. It is visible on your screen shot, but it is limited to one line in height. So I would recommend that you drag this down so that you can see a few lines of script. The Show dropdown in the Editor allows you to look at the script in various events. In the example I posted, there is script in the click event.
Object palette (and Font & Paragraph palettes). These will allow you to make changes to various properties, depending on the object that is selected.
You will see from the screenshot that you can position and stack the palettes to suite your screen and workflow.
Now, in relation to your screenshot:
You have selected a single radio button in your group. You need to select the whole exclusion group, this is easy in the hierarchy palette.
In the Object > Binding palette you have ticked the Specify Item Values (good), but you need to edit the values to match the Display Items. For example for item "$85", the specified value should be "85".
For starters, I would recommend that you open a few of the palettes and then have a look at my example and the screenshots. Hopefully that will clear it up for you.
Niall -
How to get the width of a numeric field at runtime
Hi, everyone :D
Is there a built-in that let me get the width of a numeric field at runtime? The SRW bulit in only has the SWR.GET_PAGE_NUM built-in. Is there something like the Get_item_property of Forms IN Report?
Thanks
Edited by: user12422762 on 07-ene-2010 14:16
Edited by: user12422762 on 07-ene-2010 14:30
Edited by: user12422762 on 08-ene-2010 4:40
Edited by: user12422762 on 08-ene-2010 4:50Hi. Thanks for answering. I need the width because i want to set the format of the field at runtime. The quantity of decimal digits for all the numeric fieds in the report is received as a parameter.
I can use a function to create the respective decimal mask ('D99,'D999',etc.) and then call the SRW.SET_FORMAT_MASK in the format trigger of every single field, but i'd have to type the mask of the integral part of the number in the code of the trigger ('99G999D99, '999G999G999D'). However, If i could get the width, i'd just create a function and call it from every format trigger.
Edited by: user12422762 on 08-ene-2010 10:05
Edited by: user12422762 on 08-ene-2010 10:06
Edited by: user12422762 on 08-ene-2010 10:08 -
Aggregate a numeric field in an internal table
Hi All,
I have a small requirement in ABAP it goes in this fashion
I need to aggregate a numeric field in an internal table, the table is as follows
FLD1 FLD2 NUM1 FLD3
123A B1 10 C1
123A B1 25 C1
123B B1 20 C2
123C B2 10 C3
Note: FLD1, FLD2, FLD3 are of type numeric characters and NUM1 is of type number or integer
I want the result to be as follows
FLD1 FLD2 NUM1 FLD3
123A B1 35 C1
123B B1 20 C2
123C B2 10 C3
i.e. values in field NUM1 should get add up when the values in all other fields are same
I am not able to use _collect_ for this as the fields contain numeric characters.
Regards and Thanks,
AntonyHi Antony
collect here works like this:-
use at new field
sum
end at.
Pls reward points if it wil be helpful.
Regards
Depanker -
Format of numeric field cannot retain via Live Office
In Webi, I changed the format of an numeric field to 2 decimal places. When I retrieved this field to Excel via Live Office, I found the format of 2 decimal places cannot be retained. It ended up displayed in 1 decimal places.
I found when a webi report exported to Excel, the format can be retained.
Does anyone know if this is a product design or product issue? Thanks.
Regards,
GloriaHi Gloria,
I had a look at this in XI release 3.0 and received the same issue. The only way I could get this to work was to use the FormatNumber() method. This returns the value as a string, which live office represents with the trailing 0.
So if the cell value was 12345.6, then FormatNumber([my cell]; "#,##0.00") will display 12345.60. This will display correctly in Excel (except that it is justified as text) when brought in by live office.
This more of a work around than a fix, so you may want to raise a case.
Regards
Alan -
How to format a numeric field in ES2 ?
Hi...
I'm trying to format a numeric field in LiveCycle designer using six digit and allowing zero's "000000"…
I went to patterns for setting the format, unfortunately I couldn't know how figure it out?
I’ve tried this pattern: null{}|zero{000000}|num.integer{}
It didn’t work!
what actually I’m looking for is six digit at all time for instance if enter value of 1 in the field expect to appear 000001 ,and if i enter value 567 the appearance will be 000567 in the field and so on...etc.
Another issue is how to validate a range of numeric value like 000001-999999 so that the input will be only restricted by those values…
Hope this is clear! And sorry for my bad English
Best Regards...Hi,
could you please share your solution?
I have a similar problem. I need to allow zeros before my integers to be inputed to the form.
thanks.
Please see my posting here:
http://forums.adobe.com/thread/870306?tstart=0 -
Error when converting a numeric field to XML
Hi,
When i run the Adobe intractive form,i am getting following exception
"Error when converting a numeric field to XML"
Anyone plz suggest
Regards,
vinothHi Vinoth Raja,
For resolving the following exception
"Error when converting a numeric field to XML"
You have to follow the below link:-
http://www.saptechies.com/error-when-converting-numeric-field-xml/
May be it will help you
Regards,
Sushma Yadav -
How to right align a read only numeric field in a panel form layout
Hi, does anyone know how to right align a read only numeric field in a panel form layout? I am using: Style Class = AFFieldNumberMarker, but it only seems to work if the field is disabled. Disabling the field gives it a difference appearance that does not look right on our forms. These are calculated fields, which cannot be modified, so read only is necessary.
I have looked online for some answers, and it seems that others are having similar issues.
I have tried different combinations for the properties, but so far I cannot get it to work.
Thanks
Judy
I am using JDEV 11.1.1.5Sorry for the delay in my response. Here is the code
<af:inputText value="#{bindings.TotalAirlineCostEst.inputValue}"
label="#{bindings.TotalAirlineCostEst.hints.label}"
required="#{bindings.TotalAirlineCostEst.hints.mandatory}"
columns="#{bindings.TotalAirlineCostEst.hints.displayWidth}"
maximumLength="#{bindings.TotalAirlineCostEst.hints.precision}"
shortDesc="#{bindings.TotalAirlineCostEst.hints.tooltip}"
id="it20" readOnly="false"
disabled="true"
styleClass="AFFieldNumberMarker">
<f:validator binding="#{bindings.TotalAirlineCostEst.validator}"/>
<af:convertNumber groupingUsed="true"
pattern="#{bindings.TotalAirlineCostEst.format}"
type="number"
maxFractionDigits="0"/>
</af:inputText>
thank you,
Judy -
Extra zeros in numeric fields when I create spreadsheet from data files
I created a form with Live Cycle, and then in Adobe I use the option "create a spread sheet from data files" to import the answers to a xls file.
I have two problems with this action: the first one is that I get 8 extra zeros in each numeric field, the second one is that fields are ordered by type and not by appearance.
I tried a different approach importing directly in Excel, in that way there are no extra zeros and the order is correct, but I get just one form each time, and in a "stairways" fashion (i. e. first field in A1, second in B2, and so on)
I'd appreciate any helpWhere do you find the command "create a spread sheet from data files"?
Anyway i have a similar problem: when i export data in a .csv file and than i import it in excel, i always get 8 extra zeros... how can i solve the problem? -
Hi,
I am using the following code.
Tables : vbap.
DATA: t_vbap TYPE STANDARD TABLE OF vbap,
x_vbap TYPE vbap.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
SELECT * FROM vbap
INTO TABLE t_vbap
WHERE vbeln IN s_vbeln.
LOOP AT t_vbap INTO x_vbap.
at new vbeln.
write:'new vbeln'.
ENDAT.
ENDLOOP.
In debugging mode, the non-numeric fields on x_vbap becomes ****
I want to know whether this can be done using oops.. any methods available for at new
Moderator message: please search for available information/documentation before asking (as you can tell from some of the replies so far)
locked by: Thomas Zloch on Oct 1, 2010 3:25 PMsee documentation:
"If the INTO addition is used in the LOOP statement to assign the content of the current line to a work area wa, its content is changed upon entry into the AT-ENDAT control structure as follows:
The components of the current control key remain unchanged.
All components with a character-type, flat data type to the right of the current control key are set to character "*" in every position.
All the other components to the right of the current control key are set to their initial value.
When the AT-ENDAT control structure is exited, the content of the current table line is assigned to the entire work area wa. "
Maybe you are looking for
-
Using USA $ card on UK account for iTunes
Hi I was very kindly given a fifty dollar iTunes card which I have tried to redeem - but it will not let me as I have a UK account? What can I do. p.s. I cannot find a phone number to call anyone to ask? Please can anyone help? Dave
-
We use MS Exchange for our business Contacts, Email and Calendars. When I add an event to my exchange calendar in my iphone5 it will not syncronize to my exchange server, it does works from ms exchange to the phone. Can this be fixed?
-
my console icon is now a black and yellow "Warning ay 7:36" what does this mean
-
Dear sir/madam, I am now using the J2ME version 2.0 (beta) in that when I build the program I can't see the JAR file. May I know where will be the Jar file for the application? How t orun that using the Run-OTA option in this? Thanks
-
As above question. Has never happened before.