Black line Down Center of Screen
Alright guys see if you can figure this one out.
I have a MBP I have a black line directly down the center the the screen just under a quarter inch wide. It has been there for a while now but I was trying to fix it today. At times the line can get a bit smaller or larger and rarely it will go away...... I opened it up and unplugged the LVDS cable from the logic board and the entire lcd turned white but once i plugged it back in the lines retured. Not sure if this is an LCD problem or LVDS cable problem. I will add more detail if necessary but this is the start.
Do you see the line while the startup of the computer? Do you see the line when starting from CD/DVD?
Similar Messages
-
Why does photosmart c6180 all in one when printing of faxing produces a black line down center of pa
everytime i sent a fax ormake a copy or print, I get a black line straight down the center of page
Hi there 1225,
This article covers the problem with black lines you are having. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
I have a one inch diameter flickering line down center of screen.
I have a one inch wide flickering line down the center of my screen. Can this be fixed at home? My computer is just 4 yrs old and I cannot afford to buy a new one. I love my mac.
It's very likely a problem with the LCD. You can decide if you want to fix it or not. I wouldn't suggest trying to repair it yourself as it's challenging to replace an LCD on the iMac.
Your best bet is to find a local authorized repair facility, call around and see if any provide onsite service. It probably will be at least several hundred dollars to fix.
You can find local AASPs by going to: http://www.apple.com/buy/locator/service/ -
My iphone 3gs is acting weird, every time i get a call or if i try and call some one my iphone gets random black lines down it) so what can I do to fix it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Solid black line on HP tablet screen
I just got this HP stream 7 5709. So far so good except there is a horizontal black line just across the screen. I first thought it is the screen protector, but now I begin to think it is in the display itself. Is this known?Attached the image here. Thanks
This question was solved.
View Solution.invalid image link.
any kind of lines on the screen that persist all the time are defective LCDs and will need a replacement. -
Black line down middle of copies
We have a HP 6480 all in one that prints fine but when we make copies it prints a black line down th middle of the copy? I have cleaned the glass and rollers outside and in. what else can I do??
Hi ChrisCanon,
The lines on copies that you are experiencing is a result of the scan glass being dirty or scratched. The scan glass that the printer uses when scanning from the ADF is located to the left of the larger glass area (platen) when you open the cover. It is the smaller glass strip on the left hand side of the unit.
Spray some glass cleaner on a paper towel and then clean the smaller glass area. Once cleaned, try scanning from the ADF again.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Ipad 2 front camera has a blurry black line down the middle
Evening,
My Ipad 2 front camera has a blurry black line down the middle, tried resetting but still there. back camera is fine.
Any ideas ???Hello AndyPharris,
It sounds like you're seeing an unexpected black line when you take photos with your rear camera. I would next backup the iPad to your iTunes library:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it from your backup with this article as a new device to test the issue:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
If it works, restore from your backup and verify it still works. If the issue persists when you restore as new, I would seek service for your device with this page:
iPad Repair - Other
http://www.apple.com/support/ipad/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
Where'd that black line down the middle come from?
I have a black line down the middle of each page of a template that is visible in the PDF Export. Since this is a magazine template, is it supposed to be there?
Thx.
PaulOkay, as long as it's okay that it shows up in the PDF export.
Thx. -
I was using my computer just as usual, I was on Microsoft Words and doing lectures on the Internet. Then, out of nowhere, the screen froze and black lines appeared all over the screen and the computer shut down. The screen was all black, but I think it was still open because my laptop was doing sounds, three beeps. When it beeps, the little light that shows you when your laptop is open is bright, so the beeps and the light are synchronized. AND I DON'T KNOW WHAT TO DO, help me!!!
There is a hardware problem. Possibly bad RAM. Please make a Genius Appointment and take it in for service.
-
IPad 3 - black line down left-side of screen
My new iPad has dark thin line down left-side of screen.
Any ideas why this appears?
Screen appears fine apart from this line.take it to your local apple store and have them take a look at it. You probably want to make an appointment first.
-
Vertical black lines down middle of page
Hi folks,
I have an LaserJet 4250n that's putting vertical light black smudges/lines down the center of my pages. It's all the way down, but it gets lighter at certain points and picks back up again. I've tried replacing the toner cartridge and cleaning the rollers, to no avail.
Any ideas?
Thanks!
James
This question was solved.
View Solution.Hi James,
I am a printer technician for HP in Australia and a full time employee. I look after many printers including this one.
Lines down the page can be caused by a few things - depending on what the line looks like.
If it is a smudged dirty streaky mark continously down the page, you migh have a dirty fuser - it may have been picking up toner and it has built up and then put it back down on the paper.
A thin defined black line might be a scratched drum or developer - the laser might be refracting and drawing the defect onto the drum.
Blank or white lines could be something stopping the toner from getting to the paper - transfer roller under the toner might have something stuck on it.
A repeated mark or defect could also be a dirty fuser - glue or wax from envelopes and labels could do this.
Try swapping the toner with another to test - borrow one if you can.
Run 3 or 4 cleaning pages - in the menu, configure device, print quality menu, create/process cleaning page.
Remove the fuser - back door comes off, little blue clips, pull it. out - rotate using the green knob and you might be able to gently remove something stuck in it.
If you can get to another 4250 or 4350 you could borrow the fuser and find out.
For this machine, I find worn out fusers and dirty printers are most commonly showing these symptoms. Next common is low quality after market cartridges.
Hope I can help you here
Steve Hewitt
HP Australia
Melbourne.
Although I am an HP employee, I am speaking for myself and not for HP. -
Solution for black line in Ipod classic screen?
Hello
Last week my ipod fell on the floor and since then I have a black line in the middle of the screen. The ipod is phisically intact, no scratch, not broken. Only when I turn it on, I have a big black line in the middle. At the beginning it was small dots and now it s a big line
Is there any solution? Change the screen? Or do I have to live with it?
Thanks a lot in advance
VivileWhen you drop it, the impact knock off some connection in the Display circuitry, those SMT balls, so the missing connection cause the unwanted lines.
However if you are lucky, just try
this iPod Hard Reset ( it wont delete anything on your iPod)
Toggle the Hold switch ( make sure you dont see the red mark)
Press Menu and center buttons simultaneously for about 10 secs till the Apple Logo comes ON then release the buttons.
Select you language preferrence.
See this Apple support article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!
You can change your screen, if it is under warranty. (they replaced it with a refurbish iPod)
OR if it is not under warranty, to can also get it replaced for a fee at Apple shop
or bring it to a 3rd Party iPod service vendor. -
Random black lines in different application screens
My MacBook Pro is displaying random black lines across the screen on various applications. They stay on the screen even if I scroll up and down, but don't go onto background applications or the desktop. Has anyone else had this issue?
I'd be happy to email a screenshot.Uninstalled iTunes completely and found a older firmware for the iPod. Installed it. Then installed the iTunes 7 but did not have the iTunes update the iPod. Worked like a charm! No more black lines.
-
Black line down middle of copies from Auto Document Feeder. Canon mx922.
When printing copies through te Auto Document Feeder (the feeder on top) of my Canon mx922, a black line appears down the middle of the page. How do I clean the ADF/ fix this problem? Thank you.
Hi ChrisCanon,
The lines on copies that you are experiencing is a result of the scan glass being dirty or scratched. The scan glass that the printer uses when scanning from the ADF is located to the left of the larger glass area (platen) when you open the cover. It is the smaller glass strip on the left hand side of the unit.
Spray some glass cleaner on a paper towel and then clean the smaller glass area. Once cleaned, try scanning from the ADF again.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
1099 2010 Forms Print with heavy black line down the right hand side
Greetings,
When we print the 1099 2010 Mscellaneous Income form we have this heavy black line that goes down the right hand side of the margin. We already applied all notes for 2010, including the latest one that had the margin correction published on 1/21/2011.
AnywOurs print that way, too. The black line is in the 1099MISC_2010.bmp image that SAP provided in the note. The image is used as the background for the forms.
Regards,
Shannon
Maybe you are looking for
-
Like it says in the title basically. I want to use a time capsule to store my files and backups and access it from my phone and MacBook Air. However I do not want the others in my house who are currently connected to the same wifi/ethernet router to
-
Restoring the default settings for Audition CS6
Fortunately you don't have to uninstall and reinstall Audition to do this - although that's certainly an option. Bear in mind that doing this will only work if you choose to delete your preferences as part of the process. There are several other opti
-
I have doubt related to rollback in albpm. though we have COMPENSATION HANDLDLING method to deal with rollbacks but what if we make an entry in databse and we have to rollback the changes. I tried it using compensation handling but i dont think that
-
I have a dual monitor setup - Macbook Pro screen as secondary and an external monitor as primary screen. I have been running Firefox 3.6.x without any problem. Only just updated to Firefox 6 and the problem appear - download window does not show up.
-
I have tried everything from re-installing FF 32.1 restarting is safe mode re-examined all extensions to see if any could be cause it and disabled some and nothing. I will NOT go higher than 23 as I have many more problems when I was in those I have