Black line flicker after speed change

I have this really annoying problem. The DV footage from my cannon XM2 plays fine in the timeline but as soon as i apply changes in speed I get the dreaded flickering black line at the top of my screen. I know there are lots of posts out there about similar issues, but most are with regard to still images as apposed to video which is what I'm using. Does anyone know exactly what causes this during the speed change process and if so, what can be done to prevent this? I have a hunch its to do with scan rates as the problem only occurs within certain speed ranges. Any help would be appreciated.
Thanks

I believe Patrick Shefield posted a method here a while back, for doing speed changes using compressor which gave a much better result. Might try a search for it here.
rh

Similar Messages

  • Audio out of sync after speed change...

    I thought I'd posted this, but it doesn't appear in the list of subjects, so I'll try again...
    I have a hard limit of 30 minutes for my church's broadcasts on Public Access TV. Some of the sermons, the only part of the service we broadcast, have run over time though usually only by a couple of minutes. I've tried the "simple" fix of right-clicking on the video in the timeline and changing the "Speed/Duration" setting, making sure to click the "Maintain pitch" option. Prior to CS3 this usually worked without problem. Now, with CS3, the audio gets distorted ("fuzzy", like there's another channel added slightly off-phase) and the audio is generally out of sync with the video by as much as a full second.
    Can anyone suggest WHY this is happening and, perhaps more importantly, what steps I can take to fix the audio WHEN it happens?!?!
    Thanks in advance,
    J. Sky 8^)

    Jim,
    Sorry that I've taken so long to respond...
    I do this rarely, so it's hard to be definitive, but I have noticed that the DELAY (out of sync) problem can happen in either situation ("maintain pitch" selected or NOT), but have only been able to recognize the distortion (fuzziness) when "maintain pitch" is selected.
    Hope that helps!
    Thanks for any and all assistance!!
    - Jim 8^)

  • Ssrs 2008 r2 black line incorrectly being displayed

    In an existing SSRS 2008 r2 report, I just added a page header so that I can display global values in the page header like run date, run time, and page number. Within the report header, I placed all the report header data within a rectangle. Now when I run
    the report, there is a black line appearing after the report header but before the details of the report.
    I have changed all the border colors to be white and the borderstyle to none. The black solid line between last part of report header to before the detail data keeps appearing.
    Thus can you tell me how to keep this black line from end of pageheader or rectangle to before the detail data from appearing?

    Hi wendy,
    According to your description, I taken a simple test in my local environment (SSRS 2008R2). In my scenario, I insert a page header in the report, then use a rectangle to contain all the items (such as global values) within the page header after creating
    a table in the report body. While everything goes well, and there is no such a black line between page header and report body.
    As per my understanding, may be you have set the BorderColor property to Black and BorderStyle to Solid of Page header or Rectangle or Report Body. So we can double check those item properties in the report.
    If this issue still exists, could you please post the .rdl file and your dataset with sample datato us by the following E-mail address?  It is benefit for us to do further analysis.
    E-mail: [email protected]
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Can not access on line banking after password

    can not access on line banking after password

    No change to password. Bank directed me to apple for possible problem. It happen after installing 'Yosemite'

  • I have small black lines that appeared after I exported from word to PDF. I can't remove them.

    I can't edit/delete the black lines with content editing or form editing (they are not selectable, just like a line that was created in word prior to export), and when I tried to write a white line over it with a comment mark up, it does not show when opened with adobe.
    Further, redaction with a white box erased nearby text or text boxes.
    How can I white out/remove these small lines?
    I'm using Yosemite OS X with a macbook pro, acrobat XI.
    Thanks!

    Hi ,
    Could you please tell is that some specific file in which those black lines have appeared or are there any other files as well ?
    You can try exporting another test file to PDF and compare the results .
    Will it be possible for you to share the file with us so that we can analyze at our end ?If yes ,please share it on [email protected] .
    You could also send us the screen shot of the files ( both after and before export) so that we can have a look how it looks and what is the method to remove those lines.
    Regards
    Sukrit Dhingra

  • Experiencing black lines horizontally across my web pages after installing W7

    I just installed W7 on my computer. FF not happy. Experiencing black lines across my pages. If I type the line goes away. But returns again if I scroll down the page.
    This happens on any page I go to on the internet. This does not go away no matter how long I am on the page. All could be going well and then, zap(!), the lines appear again.
    I did a FF refresh, restarted my pc, still get the lines.
    At this time I only use 2 tabs at a time.
    My homepage is yahoo mail.
    I have a 32 bit operating system.
    I am connected to a modem and wireless router.
    My service provider is Hotwire (dumb provider I know, but it is the only choice I have!).
    I did not experience this problem with XP.

    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • MSI GS60-2PC Screen flicker and horizontal black lines issue

    After about 2 weeks of using my GS60, I began to notice that the screen sometimes flickered, and on other occasions horizontal black lines would appear. I have updated my GTX driver to the latest version, and I haven't been able to find any help on the net. Does anyone know how to fix this issue?

    Hi!!! I'm Manuel from Argentina. I bought a MSI GS60 in miami 5 months ago, and... I HAVE THE SAME PROBLEM!! sometimes mi screen is flashing and appeared horizontal lines  (blacks).
    There's no solution for this problem? it's a very expensive laptop.
    I hope someone can help.
    greetings from Argentina!!

  • Deskjet 6940 black ink smearing on page sometime after cartridge change

    The ink started smearing on the printed page, not immediately after I changed the ink cartridge, but after around 50 sheets.  Some sheets have faint lines perpendicular to the printed lines as if ink were on the rollers.
    I opened up the printer and wiped excess ink off the bottom of the gray cables and off the stainless rod running across the interior.
    Anyone have any thoughts?
    With thanks
    This question was solved.
    View Solution.

    Hello NHarchivist,
    I see that this is your first visit with us on the HP Forums. Please let me take a moment to say "Welcome".
    I hope you enjoy your experience!
    To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some issues with Smears and/or streaks on your print-out's.
    Please click on the following link that troubleshoots Ink Smears or Streaks.
    Please feel free to write me back if you have any other questions or concerns.
    If I don't hear back from you today, I hope you have a Fantastic weekend.
    Cheers,    
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • %ONLINE-SP-6-REGN_TIMER: multiple line cards down after config change

    Hi,
    I was wondering if someone could help.
    I recently changed the entire configuration on two 6509 switches, and the fibre modules on slot 7 and 8 have gone down on BOTH switches. It would be easy to say that its a hardware fault but I cannot understand how module 7 and 8 can go down on both switches. Initially I thought it maybe due to IOS bug 22-33.SXI2a.bin" so I upgraded it to s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin but it still down.
    These are the actions I have carrried out to try resolve the issue:
    - Reverted back to orginal configs but no luck
    - Tried to use "power enable" command but the status light on both modules seems to turn red and then go off again.
    - I have also tried to put one of the fibre modules into a different slot but no joy
    - Upgraded the IOS from 22-33.SXI2a. to 122-18.SXF12a
    I am running out of ideas.. can anyone help ? I am sure that hardware fault cannot occur on BOTH modules 7 & 8 on BOTH switches after config change.
    The error in the log shows that modules "failed to bring online because of registration timer event". I understand this means that it is unable to download the image within the allocated time.. maybe I could manually copy the image onto the line card if that is possible ?? any ideas ?
    Daughterboard         WS-SUP720          SAL135063V2  4.0    Ok
      7  Centralized Forwarding Card WS-F6700-CFC       SAL1419HKJK  4.1    PwrDown
      8  Centralized Forwarding Card WS-F6700-CFC       SAL1419HAG0  4.1    PwrDown
    Mod                                                      Hw    Fw           Sw           Status
      7  5475.d016.075c to 5475.d016.075f   3.1   Unknown      Unknown      PwrDown
      8  5475.d0bb.7404 to 5475.d0bb.7407   3.1   Unknown      Unknown      PwrDown
    System image file is "disk0:s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin"
    BOOT variable = disk0:s72033-advipservicesk9_wan-mz.122-18.SXF12a.bin,12;sup-bootdisk,1;
    CONFIG_FILE variable =
    BOOTLDR variable =
    Configuration register is 0x2102
    Standby is not present.
    May 28 17:25:10.352: %C6KPWR-SP-4-DISABLED: power to module in slot 7 set off (Module  Failed SCP dnld)
    May 28 17:25:10.452: %ONLINE-SP-6-REGN_TIMER: Module 8, Proc. 0. Failed to bring online because of registration timer event
    sm(cygnus_oir_bay slot8), running yes, state wait_til_online
    Last transition recorded: (disabled)-> disabled (disabled)-> disabled2 (restart)-> wait_til_disabled (timer)-> may_be_occupied (timer)-> occupied (known)-> can_power_on (yes_power)-> powered_on (real_power_on)-> check_power_on (timer)-> check_power_on (power_on_ok)-> wait_til_online
    May 28 17:25:10.452: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set off (Module  Failed SCP dnld)
    May 29 11:41:16.601: %SYS-5-CONFIG_I: Configured from console by console

    Would anyone know if the line cards are maybe failing due to Embedded Event Manager configuration ? The person who configured this lab has left the company so I am not sure what the EEM configurations actually mean.
    The reason i am suspecting the EEM configuration is because the error in the log seems to suggest the module failed due to registration timer event.
    May 30 14:47:00.366: %ONLINE-SP-6-REGN_TIMER: Module 8, Proc. 0. Failed to bring online because of registration timer event
    Just trying to check all the possibilities as I have tried everything else,
    event manager directory user policy "disk0:/fcp_eem"
    event manager directory user repository tftp://10.11.x.x/xxx/
    event manager scheduler script thread class default number 10
    no event manager policy Mandatory.go_switchbus.tcl type system
    event manager policy rp_test.tcl type user
    event manager detector rpc ssh acl 60 event manager directory user policy "disk0:/fcp_eem"
    event manager directory user repository tftp://10.11.216.145/FCPD/
    event manager scheduler script thread class default number 10
    no event manager policy Mandatory.go_switchbus.tcl type system
    event manager policy rp_test.tcl type user
    event manager detector rpc ssh acl 60

  • UDF in documents lines that can be Change after adding the doc.

    Dear all
    How can i create a UDF in documents lines that can be change after adding the doc? He need to mark some of the lines to already audit or not audit and the date of the action.
    Kind Regards
    Margarida

    It also depends on what documents you are wanting to add these comments to. On documents such as the A/R Invoice/ Delivery, and A/P Invoice/ Goods Receipt PO you cannot change the UDFs on the line item after the document is added (regardless of whether the document is closed). Sales Orders/ Quotes and Purchase Orders line item UDFs can be changed as long as the line hasn't been closed (or partially received/delivered/invoiced).
    Hopefully that makes sense. I could give more of an explanation if I knew what documents you were wanting to add these line item comments to.

  • Pages is sending my documents in docx format, but windows unable to open them. They arrive blank or can only be read as a single line at a time. When view prior to sending the document is divided with black lines after each sentence.

    Pages is sending my documents in docx format, but windows unable to open them. They arrive blank or can only be read as a single line at a time. When viewed prior to sending, the document is divided with black lines after each sentence.

    Windows will only be able to open these if you have Word 2007+. Older versions of Word, for example Word 2003 would require a compatibility pack.
    Perhaps you can try 'Saving As' a different file type instead?
    Regards,
    Steve

  • Black lines after updating album app

    hi.,
    I am using sony experia c, after updating the album , i have a problem of black lines appears on the images. so i uninstall the updates . now its working good. but i have liked the album after updating. so i want to use it. please fix the problem and give the solution to use the new album. 
    thank you!
    Solved!
    Go to Solution.

    Have you tired reinstalling the update and clearing the cache and data from the app via Settings Apps then All locate and open Album and tap on Clear cache and data
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Black line on video after publishing

    Hello
    I have an issue with VC3.
    I import an AVI file and add my effects to it. I then publish the video to FLV format, dimensions 512 x 288.
    The source video have the exact same dimensions.
    After export all videos have a thin black line on the right of the video. The line is about 1 pixel wide.
    It's almost as if the published video have added on a pixel to the dimension and made it 513 x 288 but not stretched the video.
    Although when I check the properties of the published video it has the correct dimensions.
    I have tried to publish in AVI format as well but I still get the thin black line so it's not just the codec it's something VC does to the video.
    This is very annoying as these videos are then embedded on a website with white background and the black line is very apparent.
    Does anyone know how I could fix this please?
    Thanks!

    Best all-encompassing advice for tube stuff is:
    kenstone.net
    http://www.kenstone.net/fcphomepage/you_tube_reduxgary.html
    http://www.kenstone.net/fcphomepage/youtube_compressorgary.html
    bpgiesan

  • Black line across screen after sleep button pressed

    Hi,
    When i press the sleep button, i have these black lines appearing across the screen of my ipod which fade away almost immediately. This only happens when i press the sleep button.
    Does anyone know if this is a software or hardware issue and can it be fixed?
    thanks

    Okay, I've updated firmware.
    Can you tell me, does this mean my iMac was one of
    the first off the production line and could have all
    the usual Apple early problems...?
    I think I should still take it back to shop and
    change it for one of their new stock models in about
    3 weeks time when they take delivery of latest stock,
    what do you think?
    I'm only suspicious as I bought a first generation
    iMac G5 and had fan noise and heat problems galour. I
    don't want a repeat with an early Intel iMac.
    From what I see other posters saying who have just received new ones directly by special order, they are having to do the firmware updates as well, so there is no way to tell how new yours is or isn't. If these resets do not solve the black screen problem now, I think you'll have to take it back anyway. Unless someone else can give you another idea.
    edit-
    I understand what you're saying about the first models of anything, but I've looked at this as actually being the best of the G5 revisions combined with better, cooler running internal components. If yours is as quiet as mine, and if you resolve the black screen issue, my opinion is that it's not worth giving it up. I've been using an iMac Intel that was returned to Apple, I don't know why and don't really care because it works perfectly for me and cost less.
    Message was edited by: myhighway

  • Why won't my line spacing change even after I change the # in the leading panel

    why won't my line spacing change even after I change the # in the leading pane

    Is this for text you've already typed? Did you select it first? If that's not it, for PSE 11 and 12 go to the far right of the tool options, click the four-lined square and choose Reset Tool. For PSE 10 and earlier go to the far left options bar, click the tiny triangle (or the tool icon for really old versions) and choose Reset Tool.

Maybe you are looking for