Black line on video after publishing

Hello
I have an issue with VC3.
I import an AVI file and add my effects to it. I then publish the video to FLV format, dimensions 512 x 288.
The source video have the exact same dimensions.
After export all videos have a thin black line on the right of the video. The line is about 1 pixel wide.
It's almost as if the published video have added on a pixel to the dimension and made it 513 x 288 but not stretched the video.
Although when I check the properties of the published video it has the correct dimensions.
I have tried to publish in AVI format as well but I still get the thin black line so it's not just the codec it's something VC does to the video.
This is very annoying as these videos are then embedded on a website with white background and the black line is very apparent.
Does anyone know how I could fix this please?
Thanks!

Best all-encompassing advice for tube stuff is:
kenstone.net
http://www.kenstone.net/fcphomepage/you_tube_reduxgary.html
http://www.kenstone.net/fcphomepage/youtube_compressorgary.html
bpgiesan

Similar Messages

I have small black lines that appeared after I exported from word to PDF. I can't remove them.

I can't edit/delete the black lines with content editing or form editing (they are not selectable, just like a line that was created in word prior to export), and when I tried to write a white line over it with a comment mark up, it does not show when opened with adobe.
Further, redaction with a white box erased nearby text or text boxes.
How can I white out/remove these small lines?
I'm using Yosemite OS X with a macbook pro, acrobat XI.
Thanks!

Hi ,
Could you please tell is that some specific file in which those black lines have appeared or are there any other files as well ?
You can try exporting another test file to PDF and compare the results .
Will it be possible for you to share the file with us so that we can analyze at our end ?If yes ,please share it on [email protected] .
You could also send us the screen shot of the files ( both after and before export) so that we can have a look how it looks and what is the method to remove those lines.
Regards
Sukrit Dhingra

Black Line through Video

Im creating a video presentation for my community colleges Graphics / Multimedia Department. Ive used FCE very little so im still a novice.
I create some text in LiveType and made a video clip of it. In FCE i imported the text and the Lower Third it was going to go onto. The lower third video however was not in the correct position so I had to position it lower.
Every time I Export the video a Black Line appears at the top of the lower third clip in my video and fades with the transition. However in the preview there is no line.
I have a deadline to meet and would really like to know how to get ride of the line..

Cropped of the top of that clip, problem solved. I feel like a idiot.

Colour circles within a black and white video (after effects)

I'm new to After Effects and am looking for a spefic effect for a video I am making.
I was wanting a circle of colour (not too big) within a black and white video.
Can anyone help me?
this is an example i quickle did on photoshop

Since you're new to After Effects, I strongly recommend that you start here to learn After Effects: http://adobe.ly/bjBT3P
Going through the basic learning materials will make everything much easier.

Black line across screen after sleep button pressed

Hi,
When i press the sleep button, i have these black lines appearing across the screen of my ipod which fade away almost immediately. This only happens when i press the sleep button.
Does anyone know if this is a software or hardware issue and can it be fixed?
thanks

Okay, I've updated firmware.
Can you tell me, does this mean my iMac was one of
the first off the production line and could have all
the usual Apple early problems...?
I think I should still take it back to shop and
change it for one of their new stock models in about
3 weeks time when they take delivery of latest stock,
what do you think?
I'm only suspicious as I bought a first generation
iMac G5 and had fan noise and heat problems galour. I
don't want a repeat with an early Intel iMac.
From what I see other posters saying who have just received new ones directly by special order, they are having to do the firmware updates as well, so there is no way to tell how new yours is or isn't. If these resets do not solve the black screen problem now, I think you'll have to take it back anyway. Unless someone else can give you another idea.
edit-
I understand what you're saying about the first models of anything, but I've looked at this as actually being the best of the G5 revisions combined with better, cooler running internal components. If yours is as quiet as mine, and if you resolve the black screen issue, my opinion is that it's not worth giving it up. I've been using an iMac Intel that was returned to Apple, I don't know why and don't really care because it works perfectly for me and cost less.
Message was edited by: myhighway

Horizontal red lines across video after rendering

Hi I was color correcting a video in Adobe Premiere Pro Cs5 and had remove some noise with Neat Video. The video looks fine with the small screen, however, I adjusted it to full screen and noticed a lot of red horizontal lines across the whole video. The video was 720x480. I would like to know what am I doing wrong. I'm a beginner in color correction and using Adobe Premiere Pro. Thanks.
Gerald W. McClaren Sr.

i hope the picture helps you. There's not much information to get. It only happens after I finish rendering. I'm using adobe cs4 premiere. There is nothing wrong with the footage.

Thin white and black lines on video output

I loaded a packaged project to make some changes. (The project was packaged with a different computer than my current. Everything looks clean within Premier. I’m outputting standard Vimeo settings. One of the GoPro clips exports with come-like white lines that cover the screen. Cuts before and after are from the same camera, but do dot display any such problems. The project originally outputted just fine. I originally used neoscene to uncompress the footage. I even ran the original footage through neoscene again, but not change. Suggestions?
Windows 7 - Premiere CS4 - GoPro footage - Cineform Neoscene codec

Thanks Jim. I fixed the problem. I'm not sure what the cause was, but when I re-uncompressed the file using GoPros free software, the files outputed clean again.

Gray lines above video after exporting as quicktime. IMAGES inside.

After I export my footage as a quicktime film I get this gray lines above my footage. They change around in different scenes. Is it because I forgot to do something before exporting?
http://img822.imageshack.us/img822/6364/picture4ly.png
http://img689.imageshack.us/img689/1679/picture5gc.png

Dont know what camera was used, the footage was given to me. The dimensions of the footage is 720X486. Dont know if that helps.

Audio not playing in video after publishing in Presenter 8

I am having a problem in Presenter 8. I add the video to the power point and it plays in power point fine, but once I publish it in Presenter, the audio does not play. Any suggestions. I made sure that the settings were all correct within the Presenter.
In addition, I am having a problem getting any MP4 videos to play within Presenter. Any suggestions for that?

Which player is set as the default for FLV file types?
I have seen similar issues with VLC Player (normally a great software player), but when played in Adobe Flash, or MediaPlayer Classic HC, they played just fine. That is why I was asking about the player program used.
Also, when you run one of the FLV's through MediaInfo, what are the details of the Audio Stream?
Good luck,
Hunt

Error message on my video after Publishing.

When Publishing my video to HTML 5/SWF, in the end result I get an error message "...unable to acquire LMS API, content may not play properly and results may not be recorded..." How do I fix this?

This error message would normally appear if you have LMS reporting turned on but you're trying to test your content from your local hard drive or somewhere else that is NOT from an LMS web server.
So to fix it, either turn off LMS reporting and republish, or upload to your LMS and test from there. (You don't really need the LMS reporting turned on while you're developing the content. Just turn it on when ready to publish finally for the LMS.)

Vertical Black Lines on edges after 4:3 PAL - 4:3 NTSC conversion

I hate to cross post - but few people seem to use the Compressor Forum and there's been zero response.
. . . and once you guys in the US go to beddy-bies, I'll lose another day with the time-lag!
Can anyone come up with a cure for this little PAL - NTSC problem?
http://discussions.apple.com/thread.jspa?threadID=580170&tstart=0
Andy
G5 Quad. 8 GB. 250 & 500 GB Internal HDs. G-Tech G-Raid 1 TB. FCP 5.0.4 (Studio) Mac OS X (10.4.7) Sony HVR-Z1E.
You can't educate pork . . ..

> My other thought would be it is a scaling issue.
Going from 576 vertical pixels to 480 vertical
pixels will involve scaling the video
Of COURSE . . . !
Thanks for the tip, Trevor - when I read that, I compared the equivalent still from the PAL footage and realised the NTSC clip was squeezed!
I went through the Inspector settings and Constrain to Display Aspect was set to NONE. I've set this to 4:3 and it's cooking as I type . . .
>I have produced NTSC DVDs from PAL source by creating a PAL
DVD in DVDSP, duplicating the project, deleting the
media, changing the project to NTSC and reimporting
the media. Encoding was done in DVDSP and the
results were fine for our purpose.
Not heard of this one - but I'll certainly try it when I get a chance. I strongly recommend Hanumang's recipe though - the quality's excellent.
But you need plenty of processor power. An 80 min movie I processed some weeks ago (chapter by chapter) took several days and nights - even on the Quad G5.
I feel it's well worth it though - and I can get on with other work (Photoshop, Word, Internet etc) while it's processing. FCP seems to be one of the few things you can't use while Compressor is working.
I'll post back when I have the result of my latest Compressor test.
Andy
G5 Quad. 8 GB. 250 & 500 GB Internal HDs. G-Tech G-Raid 1 TB. FCP 5.0.4 (Studio) Mac OS X (10.4.7) Sony HVR-Z1E.
You can't educate pork . . ..

Unable to access external video file after publishing in html5

I am trying to publish a project that contains links to external files (.mp4 videos). After publishing, I get an path error message when I try to run the videos after publishing. The references to the videos are by name without any paths specified.
When I published the file the videos reside in the same folder as the captivate project file.
The instructions say copy the files to the output folder after I publish as html5.
What I did was extract the zip folder
Place the videos in the parent folder after extraction.
Ran the project. It runs except for the video execution.
There are a number of folders when the zip file is extracted.
Am I placing the videos in the right folder?

I personally prefer to get my files up on the server and link directly to them in Captivate.
Are you putting your's in the root folder of your project? eg. /projectname/... instead of/projectname/callees/ ?

How to remove the black line from a stacked canvas at run time???

Hi All,
I've developed a stacked canvas within a content canvas, when I run the form the stacked canvas apeared with a black line takes it.
How to remove this line or how to disappear this line at run time??
I tried to do this by putting (no line) in tools palette to the line color tool after selecting the black line one and after selecting the stacked canvas another once, but this did not resolve the problem!
I need something else:
I put the stacked canvas at detail data block and it didn't appear since I execute query in master data block
How to appear the stacked canvas directly before executing query in master data block???

Hi,
u mean the border line? In stacked canvas property, select contour/outline and set it to none.
Make sure, the stacked canvas is behind the content canvas in the objectnavigator. Then check your
properties of the stacked canvas:
- Position on content canvas
- size
- size of clipping
Set stacked canvas property automatic visible to yes.
Make sure the stacked canvas is not overlayed by other stacked canvas or items.
Attackwave

Want to play a video in pop up via a CEWP link in sp 2013 but facing issue after publishing the page pop up does not open

Hi All,
My Steps:-
0<sup>th</sup> Step:-
Upload a video in any doc library.
1<sup>st</sup> step:-
Add the uploaded link in App as per instruction
http://stevemannspath.blogspot.com/2012/12/sharepoint-2013-videos-in-sharepoint.html
2nd step:-
write this script in CEWP or in text and give reference to CEWP
<script type="text/javascript">
function OpenPage()
var options = SP.UI.$create_DialogOptions();
options.width = 850;
options.height = 700;
options.allowMaximize = true;
options.url="/sites/customer/VideoAsset/Forms/Video/videoplayerpage.aspx?ID=3&FolderCTID=0x0120D520A808003912E936CB74764285313433CC275AC3&List=b5087562-892a-417a-b02c-0d377d87f205&RootFolder=%2Fsites%2Fcustomer%2FVideoAsset%2FGrowth%5FDevelopment%2FAdditional%20Content&RecSrc=%2Fsites%2Fcustomer%2FVideoAsset%2FGrowth%5FDevelopment";
SP.UI.ModalDialog.ShowModalDialog(options);
</script>
<span class="s4-clust" style="display: inline-block; overflow-x: hidden; overflow-y: hidden;width: 10px; ; height: 10px; ">
<img src="/sites/customer/Style%20Library/Images/You_Tube.png" alt="" style="left: 0px !important; ; top: -128px !important; "/>
</span>
<text disable-output-escaping="yes" ddwrt:nbsp-preserve="yes">
</text>
<div class="secondary" style="padding-left: 3px;">
<a href="javascript:OpenPage()">Open</a>
</div>
I am getting error on below line-
var
options = SP.UI.$create_DialogOptions();
"object does not support this property and method"
Please help and let me know the solution.
sudhanshu sharma Do good and cast it into river :)

Also check if your javascript retains after Publishing. Sharepoint will remove malcious code/script html after saving the page and make page safe.
Regards,
Vaibhav Tikam
http://codepinch.blogspot.com
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever you see a reply being an answer to the question of the thread, click "Mark As Answer". It'll help other users who are visiting your thread for the
similar problem

Does anyone know a fix for video being out of sync after publishing to Flash in Captivate 6?

I'm working in Captivate 6.0.2.325 on Mac OS 10.6.8. My Captivate file is just 10 slides, and 2 of them contain talking-head style video clips 30 - 40 seconds long.
Everything looks fine in Preview, but when I publish to Flash the video segments appear choppy and the audio is badly out of sync.
Also, I have one slide where the audio does not play after publishing, though it plays in Preview. It's a widget slide.
I have tried the fixes suggested in this forum. My Preferences slider is slid all the way to retain slide quality etc. I've tried changing Flash versions and forcing re-publishing of slides. I've tried copying all my slides into a new file. No luck.
I have spent approximately 6 hours trying to resolve this problem and I'm about at the end of my rope, so any suggestions will be much appreciated! I will have to insert LOTS more video segments to complete this project.
Thank you!

Thank you, Rod!
While researching frame rate I came across this helpful blog posting: Crazy about Captivate: Lessons Learned: Video and Resolution in Adobe Captivate
This is the line that caught my attention: "I discovered, after several experiments, that if you publish a course in Captivate as SCALABLE with a video inserted, no matter what the resolution, it makes the video look pixelated."
When I unclick the "scalable HTML content" button before publishing, the video is fine!
Big sigh of relief! Now I just need to figure out why audio won't play on one of the slides (it has an accordian widget, if that's relevant) and why I can no longer use Effects (I get the message, "Effect file is not valid")

Black line on video after publishing

Similar Messages

Maybe you are looking for