Black lines in landscape content still exist in v.32.4.4 !!
Hi
Adobe should have been fixing this bug in 32.4.4, they did for the Adobe Content viewer.
But this bug still exists in applications made by DPS App Builder ver 32.4.4.
Adobe, please make hot fix URGENT
Thanks
Eli
If you rebuild your app with the option "Enable auto hiding of the vertical folio scroll bar" checked this issue will not appear. Will that not work for your app?
We do plan to release a fix for this on our next scheduled dot release, in approximately a week and a half.
Similar Messages
-
Black Line in LCD Display - N95 Problem
I'm using a nokia N95 Finland Made Phone.
Yesterday i noticed a small black line in the display. Then after few hours the length of the black line was increased. Still its increasing but in a very slow manner, intially i thort it was a virus i used kaspersky to scan but no virus found, then did hard reset, no good
Please Help me to fix this problem
Thnxx in advance.The alternative is to leave the screen as it is, with the black line.
This is a hardware failure. You can't fix it by pressing a few keys.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center. I have reset the ipad2 to new condition but the problem still exists.
A reset does not make tthe iPad "like new."
First, let's ensure that we agree on just what is a Reset...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
somehow changed a video in my imovie to zero fps, so it just plays black. The video still exists on my desktop but even when I delete the files from imovie and reimport them the file is still in zero fps and play black.
I'm not sure of your question.
Are you asking how to use Photoshop?
Or are you asking for the dimensions of video iMovie uses?
It edits in 720P HD, which is 1280x720.
You can make it a bit bigger so you can zoom in.
Much bigger then this is a waste of time. -
I have placed video - when previewed there are sometimes heavy black lines around the image.
If I place white rectangles in front, the black is hidden in Author, but when I preview the black lines are still there..
How to use white rectangles to mask edges?Here's view in IBA you can see bounding boxes of white rectangles that
form frame to block out black setions..
Here's iBook preview image of same page, NO WHITE FRAME!
WHY?
BOB SPRAGUE -
Ssrs 2008 r2 black line incorrectly being displayed
In an existing SSRS 2008 r2 report, I just added a page header so that I can display global values in the page header like run date, run time, and page number. Within the report header, I placed all the report header data within a rectangle. Now when I run
the report, there is a black line appearing after the report header but before the details of the report.
I have changed all the border colors to be white and the borderstyle to none. The black solid line between last part of report header to before the detail data keeps appearing.
Thus can you tell me how to keep this black line from end of pageheader or rectangle to before the detail data from appearing?Hi wendy,
According to your description, I taken a simple test in my local environment (SSRS 2008R2). In my scenario, I insert a page header in the report, then use a rectangle to contain all the items (such as global values) within the page header after creating
a table in the report body. While everything goes well, and there is no such a black line between page header and report body.
As per my understanding, may be you have set the BorderColor property to Black and BorderStyle to Solid of Page header or Rectangle or Report Body. So we can double check those item properties in the report.
If this issue still exists, could you please post the .rdl file and your dataset with sample datato us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
Ipad 2 front camera has a blurry black line down the middle
Evening,
My Ipad 2 front camera has a blurry black line down the middle, tried resetting but still there. back camera is fine.
Any ideas ???Hello AndyPharris,
It sounds like you're seeing an unexpected black line when you take photos with your rear camera. I would next backup the iPad to your iTunes library:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it from your backup with this article as a new device to test the issue:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
If it works, restore from your backup and verify it still works. If the issue persists when you restore as new, I would seek service for your device with this page:
iPad Repair - Other
http://www.apple.com/support/ipad/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling -
The Bug about 'DB_SECONDARY_BAD' still exists in BerkeleyDB4.8!
The Bug about 'DB_SECONDARY_BAD' still exists in BerkeleyDB4.8?
I'm sorry for my poor English, But I just cannot find anywhere else for help.
Thanks for your patience first!
I'm using BDB4.8 C++ API on Ubuntu 10.04, Linux Kernel 2.6.32-24-generic
$uname -a
$Linux wonpc 2.6.32-24-generic #43-Ubuntu SMP Thu Sep 16 14:17:33 UTC 2010 i686 GNU/Linux
When I update(overwrite) a record in database, I may get a DB_SECONDARY_BAD exception,
What's worse, This case doesn't always occures, it's random. So I think it probably a bug
of BDB, I have seen many issues about DB_SECONDARY_BAD with BDB4.5,4.6...
To reproduce the issue, I make a simplified test program from my real program.
The data to be stroed into database is a class called 'EntryData', It's defined in db_access.h,
where also defines some HighLevel API functions that hide the BDB calls, such as
store_entry_data(), which use EntryData as its argument. The EntryData have a string-type
member-data 'name' and a vector<string>-type mem-data 'labels', So store_entry_data() will
put the real data of EntryData to a contiguous memory block. The get_entry_data() returns
an EntryData builed up from the contiguous memory block fetched from database.
The comlete test program is post following this line:
/////////db_access.h////////////
#ifndef __DB_ACCESS_H__
#define __DB_ACCESS_H__
#include <string>
#include <vector>
#include <db_cxx.h>
class EntryData;
//extern Path DataDir; // default value, can be changed
extern int database_setup();
extern int database_close();
extern int store_entry_data(const EntryData&, u_int32_t = DB_NOOVERWRITE);
extern int get_entry_data(const std::string&, EntryData*, u_int32_t = 0);
extern int rm_entry_data(const std::string&);
class DBSetup
// 构造时调用database_setup, 超出作用域自动调用database_close .
// 该类没有数据成员.
public:
DBSetup() {
database_setup();
~DBSetup() {
database_close();
class EntryData
public:
typedef std::vector<std::string> LabelContainerType;
EntryData() {}
EntryData(const std::string& s) : name(s) {}
EntryData(const std::string& s, LabelContainerType& v)
: name(s), labels(v) {}
EntryData(const std::string&, const char*[]);
class DataBlock;
// 直接从内存块中构建, mem指针将会从数据库中获取,
// 它就是EntryData转化成的DataBlock中buf_ptr->buf的内容.
EntryData(const void* mem_blk, const int len);
~EntryData() {};
const std::string& get_name () const { return name; }
const LabelContainerType& get_labels() const { return labels; }
void set_name (const std::string& s) { name = s; }
void add_label(const std::string&);
void rem_label(const std::string&);
void show() const;
// get contiguous memory for all:
DataBlock get_block() const { return DataBlock(*this); }
class DataBlock
// contiguous memory for all.
public:
DataBlock(const EntryData& data);
// 引进一块内存作为 buf_ptr->buf 的内容.
// 例如从数据库中获取结果
DataBlock(void* mem, int len);
// 复制构造函数:
DataBlock(const DataBlock& orig) :
data_size(orig.data_size),
capacity(orig.capacity),
buf_ptr(orig.buf_ptr) { ++buf_ptr->use; }
// 赋值操作符:
DataBlock& operator=(const DataBlock& oth)
data_size = oth.data_size;
capacity = oth.capacity;
if(--buf_ptr->use == 0)
delete buf_ptr;
buf_ptr = oth.buf_ptr;
return *this;
~DataBlock() {
if(--buf_ptr->use == 0) { delete buf_ptr; }
// data()函数因 Dbt 构造函数不支持const char*而被迫返回 char*
// data() 返回的指针是应该被修改的.
const char* data() const { return buf_ptr->buf; }
int size() const { return data_size; }
private:
void pack_str(const std::string& s);
static const int init_capacity = 100;
int data_size; // 记录数据块的长度.
int capacity; // 已经分配到 buf 的内存大小.
class SmartPtr; // 前向声明.
SmartPtr* buf_ptr;
class SmartPtr
friend class DataBlock;
char* buf;
int use;
SmartPtr(char* p) : buf(p), use(1) {}
~SmartPtr() { delete [] buf; }
private:
std::string name; // entry name
LabelContainerType labels; // entry labels list
}; // class EntryData
#endif
//////db_access.cc/////////////
#include <iostream>
#include <cstring>
#include <cstdlib>
#include <vector>
#include <algorithm>
#include "directory.h"
#include "db_access.h"
using namespace std;
static Path DataDir("~/mydict_data"); // default value, can be changed
const Path& get_datadir() { return DataDir; }
static DbEnv myEnv(0);
static Db db_bynam(&myEnv, 0); // using name as key
static Db db_bylab(&myEnv, 0); // using label as key
static int generate_keys_for_db_bylab
(Db* sdbp, const Dbt* pkey, const Dbt* pdata, Dbt* skey)
EntryData entry_data(pdata->get_data(), pdata->get_size());
int lab_num = entry_data.get_labels().size();
Dbt* tmpdbt = (Dbt*) malloc( sizeof(Dbt) * lab_num );
memset(tmpdbt, 0, sizeof(Dbt) * lab_num);
EntryData::LabelContainerType::const_iterator
lab_it = entry_data.get_labels().begin(), lab_end = entry_data.get_labels().end();
for(int i = 0; lab_it != lab_end; ++lab_it, ++i) {
tmpdbt[ i ].set_data( (void*)lab_it->c_str() );
tmpdbt[ i ].set_size( lab_it->size() );
skey->set_flags(DB_DBT_MULTIPLE | DB_DBT_APPMALLOC);
skey->set_data(tmpdbt);
skey->set_size(lab_num);
return 0;
//@Return Value: return non-zero at error
extern int database_setup()
const string DBEnvHome (DataDir + "DBEnv");
const string dbfile_bynam("dbfile_bynam");
const string dbfile_bylab("dbfile_bylab");
db_bylab.set_flags(DB_DUPSORT);
const u_int32_t env_flags = DB_CREATE | DB_INIT_MPOOL;
const u_int32_t db_flags = DB_CREATE;
rmkdir(DBEnvHome);
try
myEnv.open(DBEnvHome.c_str(), env_flags, 0);
db_bynam.open(NULL, dbfile_bynam.c_str(), NULL, DB_BTREE, db_flags, 0);
db_bylab.open(NULL, dbfile_bylab.c_str(), NULL, DB_BTREE, db_flags, 0);
db_bynam.associate(NULL, &db_bylab, generate_keys_for_db_bylab, 0);
} catch(DbException &e) {
cerr << "Err when open DBEnv or Db: " << e.what() << endl;
return -1;
} catch(std::exception& e) {
cerr << "Err when open DBEnv or Db: " << e.what() << endl;
return -1;
return 0;
int database_close()
try {
db_bylab.close(0);
db_bynam.close(0);
myEnv.close(0);
} catch(DbException &e) {
cerr << e.what();
return -1;
} catch(std::exception &e) {
cerr << e.what();
return -1;
return 0;
// 返回Dbt::put()的返回值
int store_entry_data(const EntryData& e, u_int32_t flags)
int res = 0;
try {
EntryData::DataBlock blk(e);
// data()返回的buf中存放的第一个字符串便是 e.get_name().
Dbt key ( (void*)blk.data(), strlen(blk.data()) + 1 );
Dbt data( (void*)blk.data(), blk.size() );
res = db_bynam.put(NULL, &key, &data, flags);
} catch (DbException& e) {
cerr << e.what() << endl;
throw; // 重新抛出.
return res;
// 返回 Db::get()的返回值, 调用成功时 EntryData* e的值才有意义
int get_entry_data
(const std::string& entry_name, EntryData* e, u_int32_t flags)
Dbt key( (void*)entry_name.c_str(), entry_name.size() + 1 );
Dbt data;
data.set_flags(DB_DBT_MALLOC);
int res = db_bynam.get(NULL, &key, &data, flags);
if(res == 0)
new (e) EntryData( data.get_data(), data.get_size() );
free( data.get_data() );
return res;
int rm_entry_data(const std::string& name)
Dbt key( (void*)name.c_str(), name.size() + 1 );
cout << "to remove: \'" << name << "\'" << endl;
int res = db_bynam.del(NULL, &key, 0);
return res;
EntryData::EntryData(const std::string& s, const char* labels_arr[]) : name(s)
{ // labels_arr 需要以 NULL 结尾.
for(const char** i = labels_arr; *i != NULL; i++)
labels.push_back(*i);
EntryData::EntryData(const void* mem_blk, const int len)
const char* buf = (const char*)mem_blk;
int consumed = 0; // 已经消耗的mem_blk的大小.
name = buf; // 第一串为 name
consumed += name.size() + 1;
for (string label = buf + consumed;
consumed < len;
consumed += label.size() + 1)
label = buf + consumed;
labels.push_back(label);
void EntryData::add_label(const string& new_label)
if(find(labels.begin(), labels.end(), new_label)
== labels.end())
labels.push_back(new_label);
void EntryData::rem_label(const string& to_rem)
LabelContainerType::iterator iter = find(labels.begin(), labels.end(), to_rem);
if(iter != labels.end())
labels.erase(iter);
void EntryData::show() const {
cout << "name: " << name << "; labels: ";
LabelContainerType::const_iterator it, end = labels.end();
for(it = labels.begin(); it != end; ++it)
cout << *it << " ";
cout << endl;
EntryData::DataBlock::DataBlock(const EntryData& data) :
data_size(0),
capacity(init_capacity),
buf_ptr(new SmartPtr(new char[init_capacity]))
pack_str(data.name);
for(EntryData::LabelContainerType::const_iterator \
i = data.labels.begin();
i != data.labels.end();
++i) { pack_str(*i); }
void EntryData::DataBlock::pack_str(const std::string& s)
int string_size = s.size() + 1; // to put sting in buf separately.
if(capacity >= data_size + string_size) {
memcpy(buf_ptr->buf + data_size, s.c_str(), string_size);
else {
capacity = (data_size + string_size)*2; // 分配尽可能大的空间.
buf_ptr->buf = (char*)realloc(buf_ptr->buf, capacity);
memcpy(buf_ptr->buf + data_size, s.c_str(), string_size);
data_size += string_size;
//////////// test_put.cc ///////////
#include <iostream>
#include <string>
#include <cstdlib>
#include "db_access.h"
using namespace std;
int main(int argc, char** argv)
if(argc < 2) { exit(EXIT_FAILURE); }
DBSetup setupup_mydb;
int res = 0;
EntryData ed(argv[1], (const char**)argv + 2);
res = store_entry_data(ed);
if(res != 0) {
cerr << db_strerror(res) << endl;
return res;
return 0;
// To Compile:
// $ g++ -ldb_cxx -lboost_regex -o test_put test_put.cc db_access.cc directory.cc
//////////// test_update.cc ///////////
#include <iostream>
#include <cstdlib>
#include <string>
#include <boost/program_options.hpp>
#include "db_access.h"
using namespace std;
namespace po = boost::program_options;
int main(int argc, char** argv)
if(argc < 2) { exit(EXIT_SUCCESS); }
DBSetup setupup_mydb;
int res = 0;
po::options_description cmdopts("Allowed options");
po::positional_options_description pos_opts;
cmdopts.add_options()
("entry", "Specify the entry that will be edited")
("addlabel,a", po::value< vector<string> >(),
"add a label for specified entry")
("removelabel,r", po::value< vector<string> >(),
"remove the label of specified entry")
pos_opts.add("entry", 1);
po::variables_map vm;
store( po::command_line_parser(argc, argv).
options(cmdopts).positional(pos_opts).run(), vm );
notify(vm);
EntryData entry_data;
if(vm.count("entry")) {
const string& entry_to_edit = vm["entry"].as<string>();
res = get_entry_data( entry_to_edit, &entry_data );
switch (res)
case 0:
break;
case DB_NOTFOUND:
cerr << "No entry named: \'"
<< entry_to_edit << "\'\n";
return res;
break;
default:
cerr << db_strerror(res) << endl;
return res;
} else {
cerr << "No entry specified\n";
exit(EXIT_FAILURE);
EntryData new_entry_data(entry_data);
typedef vector<string>::const_iterator VS_CI;
if(vm.count("addlabel")) {
const vector<string>& to_adds = vm["addlabel"].as< vector<string> >();
VS_CI end = to_adds.end();
for(VS_CI i = to_adds.begin(); i != end; ++i) {
new_entry_data.add_label(*i);
if(vm.count("removelabel")) {
const vector<string>& to_rems = vm["removelabel"].as< vector<string> >();
VS_CI end = to_rems.end();
for(VS_CI i = to_rems.begin(); i != end; ++i) {
new_entry_data.rem_label(*i);
cout << "Old data| ";
entry_data.show();
cout << "New data| ";
new_entry_data.show();
res = store_entry_data(new_entry_data, 0); // set flags to zero permitting Over Write
if(res != 0) {
cerr << db_strerror(res) << endl;
return res;
return 0;
// To Compile:
// $ g++ -ldb_cxx -lboost_regex -lboost_program_options -o test_update test_update.cc db_access.cc directory.cc////////directory.h//////
#ifndef __DIRECTORY_H__
#define __DIRECTORY_H__
#include <string>
#include <string>
#include <sys/types.h>
using std::string;
class Path
public:
Path() {}
Path(const std::string&);
Path(const char* raw) { new (this) Path(string(raw)); }
Path upper() const;
void operator+= (const std::string&);
// convert to string (char*):
//operator std::string() const {return spath;}
operator const char*() const {return spath.c_str();}
const std::string& str() const {return spath;}
private:
std::string spath; // the real path
inline Path operator+(const Path& L, const string& R)
Path p(L);
p += R;
return p;
int rmkdir(const string& path, const mode_t mode = 0744, const int depth = -1);
#endif
///////directory.cc///////
#ifndef __DIRECTORY_H__
#define __DIRECTORY_H__
#include <string>
#include <string>
#include <sys/types.h>
using std::string;
class Path
public:
Path() {}
Path(const std::string&);
Path(const char* raw) { new (this) Path(string(raw)); }
Path upper() const;
void operator+= (const std::string&);
// convert to string (char*):
//operator std::string() const {return spath;}
operator const char*() const {return spath.c_str();}
const std::string& str() const {return spath;}
private:
std::string spath; // the real path
inline Path operator+(const Path& L, const string& R)
Path p(L);
p += R;
return p;
int rmkdir(const string& path, const mode_t mode = 0744, const int depth = -1);
#endif
//////////////////// All the code is above ////////////////////////////////
Use the under command
$ g++ -ldb_cxx -lboost_regex -o test_put test_put.cc db_access.cc directory.cc
to get a test program that can insert a record to database.
To insert a record, use the under command:
$ ./test_put ubuntu linux os
It will store an EntryData named 'ubuntu' and two labels('linux', 'os') to database.
Use the under command
$ g++ -ldb_cxx -lboost_regex -lboost_program_options -o test_update test_update.cc db_access.cc directory.cc
to get a test program that can update the existing records.
To update the record, use the under command:
$ ./test_update ubuntu -r linux -a canonical
It will update the with the key 'ubuntu', with the label 'linux' removed and a new
label 'canonical'.
Great thanks to you if you've read and understood my code!
I've said that the DB_SECONDARY_BAD exception is random. The same operation may cause
exception in one time and may goes well in another time.
As I've test below:
## Lines not started with '$' is the stdout or stderr.
$ ./test_put linux os linus
$ ./test_update linux -r os
Old data| name: linux; labels: os linus
New data| name: linux; labels: linus
$ ./test_update linux -r linus
Old data| name: linux; labels: linus
New data| name: linux; labels:
dbfile_bynam: DB_SECONDARY_BAD: Secondary index inconsistent with primary
Db::put: DB_SECONDARY_BAD: Secondary index inconsistent with primary
terminate called after throwing an instance of 'DbException'
what(): Db::put: DB_SECONDARY_BAD: Secondary index inconsistent with primary
已放弃
Look! I've received a DB_SECONDARY_BAD exception. But thus exception does not always
happen even under the same operation.
For the exception is random, you may have not the "luck" to get it during your test.
So let's insert a record by:
$ ./test_put t
and then give it a great number of labels:
$ for((i = 0; i != 100; ++i)); do ./test_update t -a "label_$i"; done
and then:
$ for((i = 0; i != 100; ++i)); do ./test_update t -r "label_$i"; done
Thus, the DB_SECONDARY_BAD exception is almost certain to happen.
I've been confused by the problem for times. I would appreciate if someone can solve
my problem.
Many thanks!
Wonder -
How to remove the black line from a stacked canvas at run time???
Hi All,
I've developed a stacked canvas within a content canvas, when I run the form the stacked canvas apeared with a black line takes it.
How to remove this line or how to disappear this line at run time??
I tried to do this by putting (no line) in tools palette to the line color tool after selecting the black line one and after selecting the stacked canvas another once, but this did not resolve the problem!
I need something else:
I put the stacked canvas at detail data block and it didn't appear since I execute query in master data block
How to appear the stacked canvas directly before executing query in master data block???Hi,
u mean the border line? In stacked canvas property, select contour/outline and set it to none.
Make sure, the stacked canvas is behind the content canvas in the objectnavigator. Then check your
properties of the stacked canvas:
- Position on content canvas
- size
- size of clipping
Set stacked canvas property automatic visible to yes.
Make sure the stacked canvas is not overlayed by other stacked canvas or items.
Attackwave -
HP Laserjet Pro MFP M12fn, printing a solid black line on every paper
I'm running windows 7 professional. I haven't received any error messages and nothing out of the oridarny has happened. My printer/scanner/fax/copy (My HP Laserjet Pro MFP M12fn, product # CZ181A) is printing with a black line down the entire paper, but its only doing it thru the feeder and not on the glass. HELP, How can I fix this?
Welcome to the HP Forums angelinaOO7,
I read your post, which indicates that you are getting a black line down the page when using the feeder. You can print fine from the glass. I can help you with this.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Clean the scanning glass and platen.
Turn the printer off.
Disconnect the power cord from the product and the wall outlet.
Open the scanner lid.
Clean the following scanner areas with a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.
Main scanner glass.
Small scanner glass to the left of the main scanner glass.
White plastic backing.
Dry the glass and white plastic backing with a chamois or a cellulose sponge to prevent spotting.
Plug the power cord into the product and the wall outlet.
Turn the printer on.
Try to make another copy.
If you are still having issues, then update the printer's firmware.
HP LaserJet Pro MFP M127fn Drivers.
Select your operating system, click next, click the link for firmware.
If you need further assistance, let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
RMAN backup files are still exist since long time, how to delete?
Dear sir;
I'm using the below script to do daily backup, however there are many rman backup files are still exist and consumes HD size, how could I delete these files in daily bases? some files dated in FEB, MAR, APR,
============Daily RMAN script=========
rman target /<<!
backup incremental level=0 as compressed backupset database format '/u15/rman/full_backup_%U.rman';
backup archivelog all not backed up 2 times format '/u15/rman/arc_backup_%U.rman';
backup current controlfile format '/u15/rman/control_%U.rman';
delete archivelog all backed up 2 times to device type disk completed before 'sysdate-7';
delete noprompt obsolete;
================================END
Thanks and best regards
AliHi;
Our backup policy should have 7 days; however we have here some files from JAN, FEB,MAR, APR /2012 WHICH ARE BEYOND THE RETENTION DATE and these files should be deleted by executing " delete noprompt obsolete; ".
All files are exist in /u15/rman/
-rw-r----- 1 oracle oinstall 1151763968 Jan 21 01:36 arc_backup_7kn19h4a_1_1.rman
-rw-r----- 1 oracle oinstall 1136882176 Jan 21 01:36 arc_backup_7ln19h4q_1_1.rman
-rw-r----- 1 oracle oinstall 1135984640 Jan 21 01:36 arc_backup_7mn19h5a_1_1.rman
-rw-r----- 1 oracle oinstall 1126627328 Jan 21 01:37 arc_backup_7nn19h5q_1_1.rman
-rw-r----- 1 oracle oinstall 880606720 Mar 12 02:53 arc_backup_7nn5ldhp_1_1.rman
-rw-r----- 1 oracle oinstall 1093043712 Jan 21 01:37 arc_backup_7on19h6a_1_1.rman
-rw-r----- 1 oracle oinstall 9797632 Dec 15 01:04 control_04mu7tcp_1_1.rman
-rw-r----- 1 oracle oinstall 36896768 Mar 3 02:55 control_4cn4tm9k_1_1.rman
-rw-r----- 1 oracle oinstall 36896768 Mar 4 02:53 control_4on50ahm_1_1.rman
-rw-r----- 1 oracle oinstall 36896768 Mar 5 02:55 control_56n52v1j_1_1.rman
-rw-r----- 1 oracle oinstall 16252928 Jan 23 01:40 control_8tn1eq3t_1_1.rman
-rw-r----- 1 oracle oinstall 16252928 Jan 24 01:40 control_9cn1heg0_1_1.rman
-rw-r----- 1 oracle oinstall 202940416 Dec 15 01:04 full_backup_01mu7t50_1_1.rman
-rw-r----- 1 oracle oinstall 1097728 Dec 15 01:04 full_backup_02mu7tcc_1_1.rman
-rw-r----- 1 oracle oinstall 201285632 Dec 14 01:04 full_backup_0nmu58ou_1_1.rman
-rw-r----- 1 oracle oinstall 5957304320 Feb 29 02:46 full_backup_2ln4g9l1_1_1.rman
-rw-r----- 1 oracle oinstall 4128768 Feb 29 02:47 full_backup_2mn4gft8_1_1.rman
-rw-r----- 1 oracle oinstall 6027075584 Mar 1 02:49 full_backup_32n4o6ov_1_1.rman
-rw-r----- 1 oracle oinstall 4128768 Mar 1 02:49 full_backup_33n4od66_1_1.rman
-rw-r----- 1 oracle oinstall 6187171840 Mar 2 02:51 full_backup_3gn4qr50_1_1.rman
-rw-r----- 1 oracle oinstall 4145152 Mar 2 02:51 full_backup_3hn4r1kn_1_1.rman
-rw-r----- 1 oracle oinstall 6115786752 Mar 3 02:51 full_backup_40n4tfgu_1_1.rman
above is a short list of contents.
to do our daily backup we perform the following script (in daily)
==================
backup incremental level=0 as compressed backupset database format '/u15/rman/full_backup_%U.rman';
backup archivelog all not backed up 2 times format '/u15/rman/arc_backup_%U.rman';
backup current controlfile format '/u15/rman/control_%U.rman';
delete archivelog all backed up 2 times to device type disk completed before 'sysdate-7';
delete noprompt obsolete;
==================
Thanks and best regards
Ali -
How do I get rid of this black line across the top of my screen...
There is this black line that stretches about midway across the entire top of my screen... I read something about reseting my PRAM and I did that but it didn't remove the line... any insight on what is wrong with it and what needs to be done??
Thank you!Is your Mac still under warranty? It sounds like a hardware failure.
-
I have small black lines that appeared after I exported from word to PDF. I can't remove them.
I can't edit/delete the black lines with content editing or form editing (they are not selectable, just like a line that was created in word prior to export), and when I tried to write a white line over it with a comment mark up, it does not show when opened with adobe.
Further, redaction with a white box erased nearby text or text boxes.
How can I white out/remove these small lines?
I'm using Yosemite OS X with a macbook pro, acrobat XI.
Thanks!Hi ,
Could you please tell is that some specific file in which those black lines have appeared or are there any other files as well ?
You can try exporting another test file to PDF and compare the results .
Will it be possible for you to share the file with us so that we can analyze at our end ?If yes ,please share it on [email protected] .
You could also send us the screen shot of the files ( both after and before export) so that we can have a look how it looks and what is the method to remove those lines.
Regards
Sukrit Dhingra -
My iPhone 5 which has been working fine has only today started to get these problems. The phones battery percentage stays at the same number and only changes if i swith it off or when it does it byitself but then stays at that number. When I use it it constantly turns off by slowly fading then showing white and black lines then going off. The screen is now shaking and keeps turning off. It was on IOS 6 which I just updated as I thought this could be the issue but it still does the same thing on IOS 7. Has anyone else experienced these problems or know what is wrong with my iPhone?
Please reply!Sounds like the device is failing. Since you updated to iOS 7, that would do the same as a restore. I would make an appointment at the Genius Bar at Apple to have the device checked.
Maybe you are looking for
-
I have an IPhone 4 that I just activated yesterday with a pre paid plan, but data doesn't work
I activated the phone yesterday. The wifi works but the 3g data does not. I have between 3-5 bars of strength but the phone will not connect to the internet. I had a virgin mobile pre paid phone that did not give me any trouble. Please help. I h
-
Mial syncs even though fetch is diabled
I have disabled fetch and set the options to manual for each user account still mail tends to syncs each time its opened. what should i do about it?
-
Data extraction from Siebel to BW - use BC or not
Hello I am doing data extraction from Siebel to BW. I can map just 15% of Siebel fields to SAP BC data sources. Do you still recommend me to use BC or forget it and create whole buch of new infoobjects and custom ods/cubes?
-
Is there anyway to rename a database using Oracle 9i on Linux? Thanks
-
Ever time I try to export my wireframe as PDF with all pages get a could not complete your request parameter was incorrect error and can't figure out why? If do one page and try to export it don't get error does it would no problem at all it only whe