Black lines not all showing up the same color when exported as any type file

Hi everyone,
I could really use some help as this is driving me crazy! Whenever I upload my Illustrator file with my logo online or export my logo as any type of file, certain black lines are lighter than others. I checked in Illustrator by clicking the lines that were showing up different shades when exported and all have the same #000000.
Does anyone have any ideas what I'm doing wrong?
Thanks!

Unfortunately my file is set up like a hot mess. Everything is in the same layer and I should have definitely done multiple ones. This is only the second logo I've designed and I'm learning as I go. Basically I did an image trace of the drawing and then went back and manually fixed lines. Instead of having only a few to select I have many all in the same layer as my color.
I noticed my vector logo works fine when exported. It's the files where I am resizing it that are coming up in the different colors.

Similar Messages

All screendumps are the same color in PS, but from Internet browser

Hi,
I know this has come up a thousand times before, and I thought I finally got the basics covered. I've been reading up on several webpages explaining all this, but it's confusing me even more as I think it should work.
Try to follow me on this:
I recently upgraded my pc, added a nice HP LP2475w monitor to the mix, and bought a ColorSpider for calibration.
This all works fine and the calibrated profile is loaded every time I start up my Vista pc. You can see the colors slightly shifting as the profile becomes active.
I work with the basic sRGB ICE61966-2.1 profile in PS CS4, but what I noticed is that any screendump, from any app is fine when pasted into PS.
But colors from any screendump from a internet browser, for instance a bright orange in the browser (IE8/FF3.5) becomes a dull brownish-orange in PS.
So,
The first confusing thing is that opening the saved .psd file in -say- XNView will show the 'original' colors from the browser.
The second strange thing is that the saved .psd file will show exactly the same colors in Bridge as in PS.
The annoying thing is that I cannot sample accurate colors from a screengrab dumped in PS, unless I change the color profile of the file to 'monitor color' (Spider profile).
But changing color profiles away from the sRGB one is bad as all webpages state.
Also, what is -again- confusing, if I save the file with "Save for Web & Devices" the colors 'pop right back' with the preview set to "Monitor Color". Even without the "convert to sRGB" checkbox checked.
Somewhere in this copy/pasting/saving there's some oddball CM going on that I just don't understand for screendumps from the browser.
I hope all this makes sense to someone, as it isn't for me and it's driving me nuts right now as I cannot use anything from screendumps out of an internet browser.
cheers for any directions in this,
rob

Thanks for the additional information. I still have more questions than answers, however, except to say that the behaviors you see are almost certainly the expected consequences of comparing managed and unmanaged color apps. I am not clear what you are comapring to what, and what your final output wants to be compared to and where (web, other PS users, print,..). Firefox 3.5 can be color managed, but it is not simply on or off. You have to specify if it is on for all rendered images or only tagged images and you also have to choose your rendering intent. Finally, you should make sure that FF is finding your monitor profile and if it is not to specify its path explicitly. This is especially important in your case since your new monitor is considered (by some) wide gamut, meaning larger departure from typical monitors (sRGB- like).
Here is a statement from your original post that I do not understand:
"but what I noticed is that any screendump, from any app is fine when pasted into PS. But colors from any screendump from a internet browser, for instance a bright orange in the browser (IE8/FF3.5) becomes a dull brownish-orange in PS."
This seems to be a separate problem unless I am missing something - I could use another coffee today.
If a screedump from any app is fine, then saying the screen dump from one app (your browser) is not fine, is inconsistent. A screendump should be simply a set of numbers, not a file and it will be considered and untagged image and any such image should render in Photoshop the same whether it came from a spreadsheet app or from some website you are viewing with your browser. That is, any differences between the original image on the screen and how it looks in Photoshop should be independent of the app from which the screenshot came.
I know you have a real workflow issue, though I am not sure exactly what you want. Probably need two coffees !
Paulo

I keep getting the same message when I try to open files on Internet. Before viewing doc must agree

I keep getting the same message when I try to open files on Internet. Before viewing doc must agree to end license agreement & Quit & relauch browser. I've done this.over & over. Now what?

Test Screen Name wrote:
When you launch Adobe Reader you should get the license agreement.
- Do you get the license agreement?
When you launch Adobe Reader you should NEVER get a message that it is already installed. That would mean you were trying to install it. NOT launch it.
I agree.
Installer:
Application:
If you're launching the first one... you're trying to reinstall it.

My document don't print the same color when I print it from PDF rather than InDesign

I have a vector image that don't print the same color when I export it to PDF but the colors are the same on the screen.
How can I be sure to have the same colors as my InDesign original document when I print it as a PDF ?

I use the default settings for High Quality Print

To Nokia Staff. Not all E66's the same.

I am writing to express my disappointment with the Nokia product I purchased recently.
I bought an E66 handset from Carrefour in Shanghai last month, thinking that it would have full features.
With the Nokia site for China not having any information available in English, I used the Nokia site from Oman (where I am currently living) to research the specifications.
It was not until I returned to Oman that I realized that the E66 sold in China and the E66 sold elsewhere was not actually the same phone.
The phone that I bought is missing key features that persuaded me to buy it in the first place. It is missing:
Front camera.
3G capabilities.
WiFi connectivity.
Lifetime navigation with OviMaps.
Plus a range of other features that I was looking for.
This is marketed as a business phone, yet is missing the features I need to properly conduct business.
I do not understand why a global brand such as Nokia would ensure that the E66 model would have the same features universally.
I am thoroughly upset and disappointed at Nokia; having been a Nokia user for more than 12 years I have been let down by the brand that I have remained loyal to. Essentially, I was misled into buying a very bad phone.
Is there any way that you can explain the reasons behind the difference in the Chinese and Global E66 and/or equip me with an E66 that has the features I am looking for?
Thank you for you time and attention.

phones vary by region ,and product code ie different versions
there is 3 versions of the e66
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100
HSDPA 850 / 1900 - American version
you can contact nokia directly here
http://europe.nokia.com/support/contact-us
are you sure you have a real original phone
as the e66 is 3g,wifi,enabled and a front camera
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

OPEN WITH -- Not all EPS are the same

Here's the situation. At one point I must've purposely -- although I don't know why now -- assigned all EPS files to open in Illustrator. Now, this wouldn't be a problem accept for the fact that I also use Photoshop EPS files. I read somewhere on the forums that I should trash the LaunchServices Cache and Prefs, but that didn't seem to help. Any other ideas or suggestions.
Thanks much!

After doing a little more research, including more searching here as well as in google, I found a few people discussing this thread here in the Forums. It helped and I am happy that all is right again with my little computer.

My Messages always show me the same conversation when opens

Hi,
I have a MacBook Air running OS X Mountain Lion 10.8.3. A few weeks ago I did something in Messages (unfortunately I don't remember what), and since then, every time I open Messages I can only see one conversation on the whole screen (there is no side bar with the full conversations list). It's the same conversation every time, and the only way I found to see the entire list of conversations is to choose "New Message" from the top bar. What can I do so that every time I'll open Messages I'll see the entire list of messages on the side?
Thanks in advance!

Hi,
This may be to do with how Messages remembers which windows were open at the close of Play as it were.
It may also be remembering things badly.
In default mode Messages displays one window called Messages (See Window Menu > Messages (CMD + 0) )
This is the combined interface and Chat window.
You can open older Chats if you have them on this Mac.
These will not display in the Main Chat window but as a separate window with no side bar and no other icons either ("To" spot or the Add Buddy/Contact button or Video Button). It should be dated asn list the Buddy you were chatting to.
Example
The Red Button (Traffic Light type icons top left) should close this window and on restart the Window should not be visible as you have closed the chat.
Obviously you can close the whole Messages window with the same Red Button on it's window.
It will not show up on restart if it was Closed/Hidden on Quitting the App.
Example Screen Shot with Buddy lists only (Yes, there are 10 of them)
Any Open chat in a separate window shoudl appear in the Window Menu at the bottom.
That maybe enough for you to figure out what is being displayed.
IT is also possible that Messages is not remembering when you have dismissed a window before Qutting the app.
If this is happening post back with that info as well.
9:32 PM Monday; March 25, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Formula that adds all cells of the same color?

I am trying to add all the cells that are of the same text color (or fill color if that is easier) so I can tabulate separate categories of information that are organized by color located throughout the spreadsheet. Is there a formula for this or a way to create a custom one that identifies the color of the cell/text?
Thanks

Question already asked and answered !
Yvan KOENIG (VALLAURIS, France) samedi 4 juin 2011 11:46:37
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Does anyone know how to keep all songs in the same album when they say featuring someone?

Each time I load a CD onto Itunes that has an artist who features another artist on that particular song, it puts it in my library as a separate CD even though it will have the same album listed. For instance Lady Gaga's song just dance features Colby O'Donnis that song is in its own spot while the rest of the cd is together that one song is separate and I don't know how to keep them all together. Someone help.

Get the Informations for that song and have a look in the "Sorting" area if there is something different. The data inserted there is just for how iTunes will order the songs.
If the Interpret in the general informations is "Lady Gaga" and in the sorting area is "Lady Gaga feat. xxxx" than you'll see Lady Gaga as the interpret but it's sort to a second entry "Lady Gaga feat. xxxx".

Apple Remote works all Computers at the same time when i don't want it too

Hi I have a Mac mini on my TV and imac and MBA on my desk if i use the apple remote for my mac mini it operates all of the machines at the same time can i stop this ?

Have you 'paired' the remote to a specific computer?
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8993.html

How do you make all your pictures the same size when making a movie?

I am putting together a presentation with jpeg images and .mov files and when they play together in the movie, the .mov do not fill the screen like the jpeg images (which were put together in a movie) - any ideas?

Mixing image and QuickTime video formats is a fun way to build custom movies. You need only understand the best method of organizing your project before starting in QuickTime Pro.
Your image files should be sized to match your video dimensions. Scaling the video up in dimensions will degrade the video quality and you don't want that. Best to edit your JPEG files to the dimension and orientation of your video. Best to "crop" images that are shot in "portrait" mode and scale down in dimension those shot in "landscape" mode so you don't bloat the file size unnecessarily.
When adding images to QuickTime files it's best to add them "scaled" to the audio track portion of the file. Since you also want to add existing "movies" I'm guessing you already have an audio track to use as a background track.
Is this true? Are you using an audio track as the source for your image files and then dropping the existing movies into that finished project?

The upper strip of the desktop shows in the same color as the screen color instead of being white.

When starting the iMac in the mornings, the upper strip of the desktop appears in the screen color instead of white. What could this be?

In System Preferences > Destop & Screensaver, deselect "Translucent menu bar."

In Photoshop V5 -How do I keep photos in the same order when Exporting a Collection to a Folder

Hi
In order to resize photos ready for Premiere Elements, I am Exporting my Collection to a folder, from the Organiser.
I then resize that Folder using Process multiple Files.
I then can import that Folder into PE.
BUT, the export seems to change the photo order to an apparent random order.
The Collection is in the right order, and there seems no options in the export dialogue to impact the order in the exported file.
Thanks
Chris
PS I am about to upgrade to version 7, but would like to get my process sorted out before then. maybe 7 does it differently.

Hi DJ
Thanks for the quick reply.
The good news is that what you suggest simplifies my process a lot. So thanks for that.
The bad news in the order in still wrong. I.E it's not as the collection order, but it is the same order as the Process Multiple file route!
So a step forward, but not quite there yet.
Thanks so far!
Chris

I cannot get the same colors when I print an image using Elements 12 (way off) and iPhoto (Close to Monitor color)

My image colors are over saturated and off in tone when I try to print with Elements 12 but if I take the same image in to iPhoto the colors are much closer to what I see on the monitor. There does not seem to be a way to match the color profile of iPhoto .
Do you have a suggestion?

Epson replied
Thank you for contacting Epson regarding your Epson Stylus Photo R2880.
We have seen an increase in calls of users using 10.7/10.8 with darkness or color issues. We do know this issue is coming from Adobe programs and they are aware of it and have told customers to test this by printing a photo from Apples Preview program, something other than an Adobe program. So if you right click on a jpeg file and select "open with", choose Preview and make settings here and print, the print should come out more like you are used to seeing. If it comes out normal, then this will tell you the program is the issue and you will need to contact Adobe for a fix or an update.
I subsequently did a color test print with Preview from an exported photo from Lightroom 4. I used Color Sync to manage the color with my icc profile to match the paper. The color came out perfectly. I then printed the picture with LR having the application manage the color and the reds remain washed out with an unacceptable print.
So it looks like the problem is with Adobe, not Epson.

How do you remove the number sequence when exporting layer comps to files? CS6. Windows 8.

Hi
I remember in CS5 there was a script you could change, but I can't remember what it was called or where it was saved. Can anyone help please?
I would like to stop Photoshop automatically adding a number prefix to exported layer comps.
Thanks

So I've found a bit in the script that I think might be it (below). Can I remove that whole bit? Or would changing the 4 to a 0 do the trick (I tried and it didn't do anything)... Sorry, but I'm not a coder so don't really know if I'm barking up the wrong tree or not.
Thanks
for ( compsIndex = 0; compsIndex < compsCount; compsIndex++ ) {
                var compRef = docRef.layerComps[ compsIndex ];
                if (exportInfo.selectionOnly && !compRef.selected) continue; // selected only
                compRef.apply();
                var duppedDocument = app.activeDocument.duplicate();
                var fileNameBody = exportInfo.fileNamePrefix;
                fileNameBody += "_" + zeroSuppress(compsIndex, 4);
                fileNameBody += "_" + compRef.name;
                if (null != compRef.comment)    fileNameBody += "_" + compRef.comment;
                fileNameBody = fileNameBody.replace(/[:\/\\*\?\"\<\>\|\\\r\\\n]/g, "_"); // '/\:*?"<>|\r\n' -> '_'
                if (fileNameBody.length > 120) fileNameBody = fileNameBody.substring(0,120);
                saveFile(duppedDocument, fileNameBody, exportInfo);
                duppedDocument.close(SaveOptions.DONOTSAVECHANGES);

Black lines not all showing up the same color when exported as any type file

Similar Messages

Maybe you are looking for