Black MacBook and 23" Apple Studio Display

Hi all,
Wondering if there's any way to get my black MacBook to work with a 23" Apple Studio Display. The display is a previous version (clear plastic casing).
Any help greatly appreciated!

You need a Mini-DVI to DVI adapter
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=17 92F16B&nplm=M9321G/B>
followed by a DVI to ADC adapter
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=18 72D402&nplm=M8661LL/B>

Similar Messages

  • DVI to ADC Adapter a 12" Powerbook and an Apple Studio Display 15"

    hello,
    i am trying to hook up a 12" powerbook with a DVI to ADC adapter to an Apple Studio Display 15".
    i´m just about to buy a used 15" display on ebay.
    i was wondering if this is working out together. in the apple store there are two DVI to ADC adapters at different prices and displays supported?
    so if anybody could help me out please let me know!!!!
    thank you very much
    regards, g.

    Hi
    unfortunately I think the Apple store have sold you the wrong item.
    I'm almost certain the DVI to ADC adapter only works with ADC based flat panel displays. DVI ports can output digital or analogue signals (or a combination of the two). The adapter seems to provide digital, which is why it works with the LCD displays, but not analogue, which is why it doesn't work with the CRT displays.
    Confusingly Apple did a 17" Studio display both as a CRT and LCD.
    Dr. Bott do a similar adapter but they explicitly state it's not compatible with the 17" CRT.
    Unfortunately I'm not sure there's a solution, as the display has an ADC connector yet I'm not aware of any adapters available that will work.

  • Horizontal black/dotted lines on Apple Studio Display

    As of about six hours ago, my screen is suddenly showing several horizontal 1px thick lines at the top of the screen; they are usually black but sometimes change to alternating black and white dotted line when a window is moved around in the area they're covering. They were not there this morning when I used the computer, they just showed up without warning. I've restarted the system to no avail; any suggestions on next steps or ideas of what might be going on here?

    Hi bogisan
    To clarify, I mentioned in my original post that I'd tested with DV and got the same problem...
    dewshi wrote:
    Actually, it shows the same issue displaying DV-PAL!
    Although I'm working with ProRes, I have already experimented with playing out DV on a DV timeline, which should be less demanding than ProRes, as you're suggesting.
    It doesn't look to me like the familiar cheese-grater artefact associated with interlacing issue as there's only one break in the image, rather than mismatching alternative lines when there is horizontal motion. I've tried different sequence settings for the field order, with no difference.
    I'm wondering if the display is out of sync? It literally looks like the screen has been sliced by a razor 1/3 of the way down, and the bottom part is a different frame to the top. It happens when I scrub through the timeline too, but stabilises once parked on single frame.
    By the way, I've also checked that the MBP has switched to the NVIDIA card rather than the slower, less energy consuming Intel video card.
    Will check out the MBP forum too...
    Thanks

  • Apple Studio Display USB Hub Evaporated Again

    I had this before and thought it was due to updates and my G4MDD DP1GHZ, however after installing the smelly new PSU, the USB Hub in the Apple Studio Display worked for 3 days, that was with the Apple USB Keyboard and Mouse connected to it. Today I got home, and fired up the computer and wanted to install a CD with updates. The mouse was working. Though when I tried to open the superdrive with the open superdrive key on the keyboard above the star sign on the number entry area of the keyboard, the superdrive would not respond, I opened it with the mouse from the Finder Bar, I put in the CD and then the mouse and keyboard went dead, no connection through the Bus on the Apple Studio Display. I forced shut down, holding my finger over the on/off illuminated switch on the Apple Studio Display. I waited and booted up and there was nothing to the keyboard or mouse so I unplugged it from one USB socket on the display and fully plugged it into the other on the display. Again nothing. So I got my USB extension cord out and fully plugged that in to the USB Hub on the rear of the G4. Mouse and Keyboard working again I searched for the HUB in the Apple Studio Display in Apple System Profiler and it had again evaporated like it had for six months before, after I replaced the original PSU with the exchanged smelly one, it sprang back to life for the last three or so days, working happily but alas, a repeat evaporation. Who knows why?
    I'll just repeat that the keyboard and the mouse are fine, again fully plugged into the onboard USB Bus, does the Apple Studio Display have any diagnostic software available able to detect the functionality of the USB Hub in the Apple Studio Display? That would be a help in sussing out what is really happening between the Radeon 9000 Pro and the Apple Studio Display.
    May I add that the Display part of the Apple Studio Display works fine.
    Please advise.

    After taking another look inside the Case and checking the screws which secured the Radeon 9000 Pro AGP/PCI Card, I removed the screw for the Radeon, the card sprang away to it's preferred location in the AGP Slot and I put the screw back in, now the USB in the Apple Studio is working every boot.
    I suspect that the heat in the case has warped the Radeon Card which then sprang it into an undesirable angle in the AGP slot causing a poor contact to the pins which connect the USB part to the Apple Studio Display.
    Just to add. I do unplug the telephone line from the wall and the Power Cord from the wall socket after shutting down. This is because I do not trust the Power or the Telephone Company after losing the internal modem and the original power supply in 2007.
    Touch wood and hope for the best. I can't say I have the same confidence in the products made in China and assembled in Singapore I had when I originally purchased this computer in Australia in 2003. Buyer beware.

  • HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    <http://support.apple.com/kb/HT5891>
    You can use USB for the Apple trackpad.
    <http://www.mobeetechnology.com/the-power-bar.html>

  • Mighty Mouse/ OS Tiger and Apple Studio Display

    Not really sure that this topic should go here or in the studio area, but here goes. A few months back I updated my G5 to apple OS X 10.4.x. Up until that point, I had a USB mightly mouse plugged into my 17" apple studio display and could restart my system with no issues.
    After updating to 10.4.x, when I boot my system, the USB mightly mouse acts only as a USB mouse and is very sensitive to movement. When I move the mouse a small amount, the point zips across the entire screen.
    Once the system is up - if I unplug the mouse from the display and replug it in, then it works correctly and is not sensitive - that is, it acts like it should with the settings I have setup for "speed" in the control panel.
    I have searched high and low for others with the same issue and have come up empty. Anyone with any ideas?
    Thanks
    Brian

    To clarify, upon restarting, the system sees the mouse as a two button USB mouse. Once the system is up, when I unplug the mouse and plug it bak in, the keyboard/mouse control panel, switches to reflect that this is a USB mightly mouse with all the various options.
    This same behavior occurs when I use the USB port on the front of the G5's case.
    Currently under the System Information ( apple in the upper left corner of the screen ), the system lists the mouse as an Apple Opticl Mouse, version 1.08
    Thanks

  • Apple studio display and lion

    Is my old Apple Studio Display, with a ADC connector, compatible with Lion - I'm getting to upgrade from Snow Leopard.  Thanks

    Yes it's compatible

  • 15" Apple Studio Display Shutting Off

    My Apple Studio Display (LCD 15", purchased 2000) visual display is intermittently shutting off. Audio remains functional, and I can still type while the display is absent and when it comes back what I typed (ie, on a word doc) is there. The screen saver does not come on during the loss of visual display - the screen just goes black. When I move the mouse around or hit the keyboard repeatedly, the visual will come back. There are not problems with the display when it is visualized. Here's what i've tried so far:
    1. All connections are secure on the ADC cable.
    2. Tried restarting computer several times - no avail
    3. Checked the display settings in system prefs - energy saver is @ 15min.
    I'm wondering if the problem is the monitor or something with the computer. I read somewhere in discussions that PRAM batteries can be a problem (mine has never been changed and I don't know how to reset).
    Any suggestions would be appreciated. I really hope to continue to use my monitor!!
    Mark

    Do you hear a zapping sound when it happens? It could be high voltage arcing. Blowing out dust might help.

  • 15" Apple Studio Display problems

    I have an old 15" Apple Studio Display (Blueberry) that I'm using with my MacPro. Every once and awhile it will flicker. It acts like it turns off and then on. The screen never goes black. I can still see whatever is on the screen. In fact, it gets larger for a split second.
    The connection is good. No loose cables.
    I am sharing the monitor with the Blue and White G3 using a Belkin Flip.
    Any ideas?

    Do you hear a zapping sound when it happens? It could be high voltage arcing. Blowing out dust might help.

  • Used Apple Studio Display, Possibly Ruined

    Hello all,
    I purchased a used Apple Studio Display a few days ago and thought nothing of it at the time (I was picking up some used Macs for friends, and it was an afterthought). I figured, what the h*ll.
    So anyway, I finally hooked it up, and was very impressed with the color calibration and overall usefulness of the monitor. The problem was it was very dirty and covered with scratches.
    So, not knowing any better, I proceeded to use some glass cleaner on it, and this got a lot of black residue off the screen, which made things look noticeably cleaner. The bad news was that this was a lot of work, and I was looking for a more "quick and dirty" (poor choice of words, I suppose) method of getting it cleaned up. So I pulled out the "Goo Gone," a commercial product that smells a bit like oranges but which also has some petroleum distillates in it.
    Anyway, long story short: Although the window cleaner and the craptastic miracle cleaner did a bang-up job insofar as the removal of the black matter, there are a few areas of the screen where I was a little too vigorous and have buffed the shine away, leaving a blurred image underneath. Who knew that the screen had a protective plastic coating? Not me, I suppose.
    So I've googled around for some kits to repair the mistake I have made, and I'm coming up empty. I see multitudinous products for cleaning the monitor, and of course I wish I had found them before I endeavored to clean this monitor (it was disgusting, I tell you! Even with the blurring, it's still an improvement!). I still can't find a product to make this puppy shine like it's supposed to.
    There remain a few noticeable scratches on the monitor, and of course I would like to buff those out if possible, but most importantly, I'd like to be able to get back the clarity I thought I was heading for (before I cleaned a little too hard!).
    Responses chiding me for my overzealous cleaning behavior are discouraged, as I am primarily interested in climbing out of the hole I'm in, not in getting shoved further down it.
    Thanks in advance,
    Art

    Well, I'm going to go ahead and answer my own question.
    I attempted to take apart the monitor to take out the smudged glare screen. I was unsuccessful; it's glued directly to the glass in such a way that its removal would have made things much worse.
    When I put it all back together, the monitor no longer worked!
    Oh well, easy come, easy go.

  • Are there any solutions for Apple Studio display connectivity to a new Air?

    Are there any solutions for Apple Studio display connectivity to a new Air?

    Again.. I have an Apple Studio Display (17", LCD)
    and want to run it on a new MacBook Air.
    Specifications at:
    http://support.apple.com/kb/SP110
    Any solutions or advise?

  • I have a 2008 black macbook and access UK tv through a purchased proxy site. I want to buy a sony bravia internet connected tv to watch the channels in more comfort. Sony tell me this won't work - that the tv cannot capture my macbook content. Any advice?

    I have a 2008 black MacBook and acess UK tv through a puchased proxy. I want to purchase a Sony Bravia internet connected tv and stream the site through a tv - Sony tell me this won't work - that a latest model tv cannot capture content and sites from a MacBook - is this true???? Surely there is a solution? Any help or advice welcome.

    They are correct.  The only stream you can wireless connect the TV to a Mac is through an AppleTV, and that's purchased content on iTunes, and your own homemade content that is H.264 MPEG-4 that is 1800kbps.   Conversion of commercial video to that format is illegal, and hence how can not be stated on the forum.    Alternatively, as long as the TV is HDMI, you can wired connect it to your MacBook using the same advice here:
    https://discussions.apple.com/message/16531141#16531141

  • Dual ADC Apple Studio Displays (clear acrylic) with Mac Mini

    I currently have the old school Apple Studio Display ADC monitor hooked up to my Mac Mini using the ADC to DVI adapter. I have a second Studio ADC Display and another ADC to DVI adapter to run Dual Displays. I just bought a SEE 2 XTREME DVI to USB which is used for adding multiple monitors. I have it all hooked up. Its just basic plug and play after installing the Mac driver. My second monitor power light just flashes and wont turn on...Any suggestions? I already made sure both monitors and both ADC to DVI adapters worked, and they do. Please Help!! Any info would be greatly appreciated.

    yea, I checked that out about the light flashes. I have tried both monitors seperately and they both work fine...just not with this DVI to USB dual monitor adapter. Also, when I had them hooked up individually, I made sure the resolution was set the same in the system preferences > displays.

  • Can a Mac mini support video to two 30" apple studio displays?

    Can a Mac mini support video to two 30" apple studio displays at the same time? If so, how do you do it and what resolution can be acheived for each monitor?

    Hi Brian,
    Nope, or not very well...
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).

  • Boot Camp - Windows 7 (64 bit) - Apple Studio Display - Driver

    Used Bootcamp to add Windows 7 to my Mac Pro running 10.6.4
    Works great but the Apple Studio Display becomes too dim on start-up of Windows 7 & I cannot control the brightness by using the Display's control.
    As well, there is no software control.
    Any idea where I can obtain a Driver for this Display for the 64 bit version of Windows 7?
    Many thanks!
    ...John

    From what I've found, it comes from some driver introduced in the boot camp update 2.1.
    Some workarounds:
    - install winACD, but it doesn't work on 64 bits systems, so no luck for us
    - boot in OSX, set the brightness as you want, disconnect the USB from the ADC adapter, then boot in windows. But you lose the USB ports of the display, you have to reconnect it when you use OSX if you want to enjoy your display, and you have to reboot 2 times if you want to change the brightness in windows...
    Some person said that it was caused by "KbdMgr.exe", but I couldn't find it.
    A real solution, like a boot camp driver update would be great...
    Message was edited by: Ptsm

Maybe you are looking for