Black MacBook stuck mid-Lion install

I have a Black MacBook (4,1), the early 2008 model.
It's current state is that I am mid-install of a app store provided version of Lion - it was at the restart point, and I cannot get past the spinning gear.  I let it go for hours.
It also will not work in Target Mode.  Disk utility sees nothing.  System Profiler on the host mac sees an "Unknown Volume" on the firewire bus.
I tried to boot from a number of disks: Snow Leopard, Tiger, and the original 10.5 disks that shipped with the laptop.  No dice.
I did do a key command that showed me what the startup disk is presently called - it identifies itself as the Lion Installer.  So my original Hard Drive is not even advertising itself right now.
So I am stuck.  I've run the Apple Hardware test - the extended one.  No problems found. 
I've pulled the battery, held down the power button for 5 secs.  nothing.
I've tried to launch in Safe Mode.  Won't do it - it stays on the spinning gear.
I am able to launch in Single user mode, so my hope is that there are some commands that could reset my mac from whatever plagues it to at least boot it so I can extricate the data and deal with the laptop's viability secondarily.
I deeply appreciate any and all advice. Thanks very much.
Best,
David
San Francisco

While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/windows_software/boot_camp

Similar Messages

  • I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

    I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

    Most likely won't run SL unless it's one that was released before Lion went public. Color SL gone from new Macs.
    27" i7 iMac 10.6.8 , Mac OS X (10.7.2), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

  • New Macbook Pro with Lion, installed Aperture - all photos disappear

    Just bought a MacBook Pro:
    2.2 GHz Intel Core i7
    4GB 1333 MHz DDR3
    AMD Radeon HD 6750M 1024 MB
    Mac OS X Lion 10.7.1
    My old computer crashed so I transfered a folder full of photos to my computer inside of a Documents file.  Some of these photos came from my previous version of iPhoto and some of the were not imported into any program at all.  I want to clean and organize my photos before importing them into any program. I do not wish to create extra clutter on my computer by importing them at this time, being that I have a very clean machine at this time.
    So, I got Aperture, newest version (software updated as of this morning) and was planning to import my photos once I organized all of them.
    However, now that I've installed Aperture, the folder of my pictures that is located in My Documents is now reading that there are (0) photos, so I can't even organize them.  Also, if I run Aperture and try to import a photo, it doesn't recognize that any photos exist.
    Now, if I look up All My Files in the Finder window, it shows that I do infact have over 9k Images, most of these being my photos that are not showing up in their file folder.  Some of these however are not conventional photos but are PDFs that I do not wish to hang out in any photo organizing/editing program.
    So, why can't I see my photos so I can organize them via my Finder folder in My Documents when I recovered them from my old computer? 
    They were never imported into my new computer's iPhoto, nor were they ever imported into my new computer's Aperture.  But I can all of them in the All My Files?
    Any help would be appreciated.

    I was able to find my photos, they were strangly refiled in a different file folder.
    Seems like Aperture is still having troubles populating the images, but I find if I open and close import, or close and repoen Aperture, then the photos will populate.
    Buggy though for sure.

  • Macbook stuck on windows install screen?

    i was doing bootcamp on my macbook pro 2010 edition ..It reached in the install page. I clicked install .
    .It was going well suddenly it stoped on 71% on expanding windows and message came .Windows cannnot install required files.the file maybe corrupt or missing error code 0x80070017..now i dont know what to do whn i restart it starts from a black page which says boot from cd or dvd ..i dont know how to get back to my mac osx..plzz  also tell a way to install the file also..

    While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/windows_software/boot_camp

  • Macbook stuck on windows install page?

    i was doing bootcamp on my macbook pro 2010 edition ..It reached in the install page. I clicked install .
    .It was going well suddenly it stoped on 71% on expanding windows and message came .Windows cannnot install required files.the file maybe corrupt or missing error code 0x80070017..now i dont know what to do whn i restart it starts from a black page which says boot from cd or dvd ..i dont know how to get back to my mac osx..plzz  also tell a way to install the file also..

    While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/windows_software/boot_camp

  • Help! Macbook stuck in Leopard install!

    Ok i accidently put the leopard CD in for the MAC OS X install. But i already have the operating system, now i realized that i want to cancel the install, but it won't let me. I dont want it to dual boot my operating system! help!
    You get two CDs in the macbook box, but i accidently put the first one in and clicked install packages, now its stuck in that installer!
    Message was edited by: Newgen_hasissues
    Message was edited by: Newgen_hasissues

    Someone please help me!

  • Mountain Lion Install Errors

    I have a mid 2012 Mac Mini, The kids had used this Mac for 6 months, So I needed it back, It had OSX Lion, the idea was to erase, format and reinstall Mountain Lion, run Disk first aid, everything good.
      Already had Mountain Lion on my mid 2012 MacBook Pro, Mountain Lion install went perfect last month on the MBP with a reformatted, erased drive.
      So on the mini I went to the app store and downloded Mountain Lion, Installed it twice, both times a "Damaged File" error occurred, downloaded 3 more times uninterupted, still same error, restarted and downloaded ML twice via WiFi, New error, "Install Failed" both times, Downloaded ML on my MBP, made a USB stick install drive, twice with "Install Failed" error.
    Do I have a 15 month old brick, I convinced my new wife that Macs are more stable and last longer as I have owned Macs since 1995, Help.

    Have you tried running Apple Diagnostics to see if there are any hardware errors showing up?

  • Migrating to new macbook air with Lion, entourage 2008 doesn't work

    I  bought a new macbook air with lion installed. trying to migrate data from my old macbook with snow leopard. Got most data across, and installed my most frequently used applications:
    - office 2008: most office apps 2008 work, if buggily. entourage not, see below.
    - firefox (hangs up when downloading updates)
    - dropbox (ditto)
    <these two problems may have something to do with internet proxy settings, will try to sort that out later>
    MAIN ISSUE:
    entourage wont open at all.  so for now i'm using my old comp for e-mail and the new for the rest.
    MY OPTIONS:
    please advise (1) what you think is the most time & nerve-saving option (2) how to do it smoothly:
    A) try to get office 2008 to work.
    when trying to open entourage, it tells me this version (office 2008 12.0) cannot open this entourage database (12.3)
    error for other apps says there is a problem with database, and rebuilding several times did not fix it.
    would have to start with updating to the version i used last (office 2008 12.3). Problem is the ms office updater does not seem to work on lion. the first update does not open, says it does not support powermac.
    B) buying office 2011, and migrating entourage 2008 to outlook.
    I suppose the best way to do this is to install office 2011 on the old mac first, then on the new one, then move database, right?
    C) migrating from entourage 2008 to lion mail.
    best way to do this would be to import entourage email to leopard mail, then move those files to the new mac?  and move entourage addresses into the mac addressbook. my major concern is that i have a lot of mailing rules, and a fair bunch of notes. a lot. i;d rather not have to recreate those by hand. Is there a way to import rules from entourage to mail?
    i also habe a huge backstock of mail, over 10,000, and a correspondigly huge addressbook (within entourage). i'm ready to abandon entourage at last (though i used it for a decade), but i want to have my addresses, my rules, and at least the last 3 yrs of emails. i get about 130 mails a day so i need plenty of automatic organizing capability.
    i never had issues  my old mac/snow leopard, i just ran out of ram and the one usb broke, so i figured it's time. kinda sorry i did not just get the usb repaired and extra ram. what a hassle these migrations always are.
    cheers!
    maedi

    Kappy wrote:
    Yes, repairing first is a sound idea. In my experience I've only moved from Entourage to the OS X applications or from one version of Entourage to another. In the latter I've been able to just copy over the Microsoft User Data folder. But I have not used Entourage for quite some time.
    Microsoft don't make it quite that easy to migrate to their own applications, but the import from a 'tidy' .rge file works well, I had a lot of issues with the first few I migrated but after performing a database repair prior to import all proceeded smoothly.

  • MacBook Pro mid-2012 running very slowly after upgrade to Yosemite

    Problem description:
    MacBook Pro mid-2012 - installed Yosemite, and the system now crawls. Webpages have very delayed responses, can take 30+ seconds to react to typing or selection. I turned off FileVault, that did not appear to help. Emptied the trash, removed some obsolete fonts. Any help for what else to try would be much appreciated.
    EtreCheck version: 2.0.11 (98)
    Report generated November 30, 2014 at 4:10:51 PM CST
    Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Verified)
    MacBook Pro - model: MacBookPro9,2
    1 2.9 GHz Intel Core i7 CPU: 2-core
    8 GB RAM Upgradeable
    BANK 0/DIMM0
    4 GB DDR3 1600 MHz ok
    BANK 1/DIMM0
    4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
    Intel HD Graphics 4000 -
    Color LCD 1280 x 800
    DELL 1901FP 1280 x 1024 @ 60 Hz
    System Software: ℹ️
    OS X 10.10.1 (14B25) - Uptime: 16:36:35
    Disk Information: ℹ️
    APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
    S.M.A.R.T. Status: Verified
    EFI (disk0s1) <not mounted> : 210 MB
    disk0s2 (disk0s2) <not mounted> : 749.30 GB
    Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
    Western Digital My Book 640.14 GB
    S.M.A.R.T. Status: Verified
    My Book (disk3s1) /Volumes/My Book : 640.13 GB (2.29 GB free)
    HP Officejet J6400 series
    Apple, Inc. Keyboard Hub
    Apple Inc. Apple Keyboard
    Toshiba External USB 3.0 2 TB
    S.M.A.R.T. Status: Verified
    EFI (disk2s1) <not mounted> : 210 MB
    Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 2.00 TB (544.67 GB free)
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. iPhone
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
    Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
    Mac App Store and identified developers
    Kernel Extensions: ℹ️
    /Applications/Boom.app
    [loaded] com.globaldelight.driver.BoomDevice (1.3 - SDK 10.9) Support
    /Applications/Toast 10 Titanium/Toast Titanium.app
    [not loaded] com.roxio.BluRaySupport (1.1.6) Support
    [not loaded] com.roxio.TDIXController (1.7) Support
    /Applications/VMware Fusion.app
    [not loaded] com.vmware.kext.vmci (90.4.19) Support
    [not loaded] com.vmware.kext.vmioplug.10.1.26 (10.1.26) Support
    [not loaded] com.vmware.kext.vmnet (0143.58.62) Support
    [not loaded] com.vmware.kext.vmx86 (0143.58.62) Support
    [not loaded] com.vmware.kext.vsockets (90.4.24) Support
    /System/Library/Extensions
    [not loaded] com.SiliconImage.driver.Si3132r5 (1.5.16) Support
    [not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d16) Support
    [not loaded] com.devguru.driver.DIFMCDFree (1.1.0) Support
    [not loaded] com.devguru.driver.DIFMSerial (1.1.0) Support
    [not loaded] com.fklt.driver (1.8.0) Support
    [not loaded] com.novatelwireless.driver.3G (2.2.8) Support
    [not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
    [not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.6) Support
    [not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.6) Support
    [not loaded] com.wacom.kext.wacomtablet (6.1.5) Support
    [loaded] zoom.us.ZoomAudioDevice (1.1 - SDK 10.8) Support
    /System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
    [not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
    /Users/[redacted]/Downloads/Transmit.app
    [not loaded] com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.6) Support
    Startup Items: ℹ️
    ProTec6: Path: /Library/StartupItems/ProTec6
    SATARaid5Daemon: Path: /Library/StartupItems/SATARaid5Daemon
    Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Agents: ℹ️
    [failed] com.apple.bird.plist
    [failed] com.apple.CallHistoryPluginHelper.plist
    [failed] com.apple.CallHistorySyncHelper.plist
    [failed] com.apple.cloudd.plist
    [failed] com.apple.cmfsyncagent.plist
    [failed] com.apple.coreservices.appleid.authentication.plist
    [failed] com.apple.EscrowSecurityAlert.plist
    [failed] com.apple.icloud.fmfd.plist
    [failed] com.apple.nsurlsessiond.plist
    [failed] com.apple.recentsd.plist
    [failed] com.apple.scopedbookmarkagent.xpc.plist
    [failed] com.apple.spindump_agent.plist
    [failed] com.apple.telephonyutilities.callservicesd.plist
    [failed] com.apple.xpc.loginitemregisterd.plist
    Problem System Launch Daemons: ℹ️
    [failed] com.apple.awdd.plist
    [failed] com.apple.ctkd.plist
    [failed] com.apple.icloud.findmydeviced.plist
    [failed] com.apple.ifdreader.plist
    [failed] com.apple.installd.plist
    [failed] com.apple.MobileFileIntegrity.plist
    [failed] com.apple.nehelper.plist
    [failed] com.apple.nsurlsessiond.plist
    [failed] com.apple.periodic-daily.plist
    [failed] com.apple.softwareupdated.plist
    [failed] com.apple.tccd.system.plist
    [failed] com.apple.wdhelper.plist
    [failed] com.apple.xpc.smd.plist
    Launch Agents: ℹ️
    [invalid?] com.adobe.AAM.Updater-1.0.plist Support
    [failed] com.adobe.CS5ServiceManager.plist Support
    [loaded] com.google.keystone.agent.plist Support
    [loaded] com.oracle.java.Java-Updater.plist Support
    [running] com.wacom.wacomtablet.plist Support
    [loaded] org.macosforge.xquartz.startx.plist Support
    Launch Daemons: ℹ️
    [loaded] com.adobe.fpsaud.plist Support
    [invalid?] com.adobe.SwitchBoard.plist Support
    [loaded] com.google.keystone.daemon.plist Support
    [running] com.icyblaze.iDocumentHelper.plist Support
    [loaded] com.microsoft.office.licensing.helper.plist Support
    [loaded] com.oracle.java.Helper-Tool.plist Support
    [loaded] com.oracle.java.JavaUpdateHelper.plist Support
    [loaded] com.roamingclient.cell.mac.roamingclient.plist Support
    [not loaded] com.sierrawireless.SierraReset.plist Support
    [running] com.sierrawireless.SWoCMon.plist Support
    [invalid?] com.sierrawireless.SWoCTool.plist Support
    [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    User Launch Agents: ℹ️
    [invalid?] com.adobe.AAM.Updater-1.0.plist Support
    [invalid?] com.adobe.ARM.[...].plist Support
    [invalid?] com.adobe.ARM.[...].plist Support
    [invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
    [loaded] com.koingosw.MacCleanse4Helper.Reminder.plist Support
    [loaded] com.koingosw.MacCleanse4Helper.TrashWatcher.plist Support
    User Login Items: ℹ️
    Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
    Boom Application (/Applications/Boom.app)
    iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    VMware Fusion Helper UNKNOWN (missing value)
    Reminders Application (/Applications/Reminders.app)
    VMware Fusion Start Menu Application (/Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app)
    Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
    Box Sync Application (/Applications/Box Sync.app)
    Dropbox 3 Application (/Applications/Dropbox 3.app)
    Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 7 Update 60 Check version
    o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
    WacomNetscape: Version: 1.1.0-5 Support
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
    WacomSafari: Version: 1.1.0-5 Support
    AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
    FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
    AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
    Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
    Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
    iPhotoPhotocast: Version: 7.0
    googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
    CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
    CouponPrinter-FireFox_v2: Version: Version 1.1.7 - SDK 10.5 Support
    SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
    DirectorShockwave: Version: 11.6.5r635 Support
    User Internet Plug-ins: ℹ️
    WebEx64: Version: 1.0 - SDK 10.6 Support
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
    Google Earth Web Plug-in: Version: 7.1 Support
    ZoomUsPlugIn: Version: ZoomBundleVersionNumber - SDK 10.9 Support
    Safari Extensions: ℹ️
    Omnibar
    Audio Plug-ins: ℹ️
    DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
    Flash Player  Support
    Flip4Mac WMV  Support
    Java  Support
    MacFUSE  Support
    NTFS-3G  Support
    Tuxera NTFS  Support
    Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
    Destinations:
    Time Machine Backups [Local]
    Total size: 2.00 TB
    Total number of backups: 64
    Oldest backup: 2013-11-30 08:18:51 +0000
    Last backup: 2014-11-30 05:20:09 +0000
    Size of backup disk: Excellent
    Backup size 2.00 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
        66% backupd
        22% mtmfs
         9% Box Sync
         3% WindowServer
         3% iTunes
    Top Processes by Memory: ℹ️
    735 MB backupd
    129 MB Google Chrome
    86 MB mds_stores
    77 MB iTunes
    69 MB firefox
    Virtual Memory Information: ℹ️
    28 MB Free RAM
    1.65 GB Active RAM
    1.64 GB Inactive RAM
    1.28 GB Wired RAM
    22.18 GB Page-ins
    204 MB Page-outs

    My apologies - this post was duplicated inadvertently. Please use:  MacBook Pro mid-2012 running very slowly after upgrade to Yosemite
    Thanks!

  • How do I reset MacBook pro with lion back to factory settings without disk?

    Good evening everyone,
    I recently purchased a MacBook pro with lion installed and I need to reset it to factory settings without a disk. anyone know how to do this?

    Restart it... and hold down command+R
    then choose disk utility and format your disk
    then choose reinstall lion
    and it's back to default.
    source of info: http://www.maclife.com/article/howtos/how_boot_lion%E2%80%99s_recovery_mode
    apple way is most slam.
    how u like me now?
    i just did this right now and my system so so fresh and pure.

  • Selling Macbook with Mountain lion

    I have a Macbook with mountain lion installed but onl have Snow Leopard install disks Can I reformat the hard drive and install Mountain lion from my Apple ID and then logout of my Apple account and sell the computer or do I have to revert to Snow leopard

    Hello:
    I would think that you could clear it, install OS X 10.8, and then sell it.  You paid for OS X 10.8.
    Barry

  • HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

    Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

    It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
    You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
    Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

  • How to get OS X LION to clean install on late 2007 Black MacBOOK 1.3?

    I recently bought a late 2007 Black MacBOOK 1.3.
    Wanting to clean install LION, I formated the HDD and cleaned up the recovery partition by fusioning the two partitions!
    I had to install LION with the use of a friends account.
    This doesn't suit me because if I need something i'm depending of that friend.
    Since LION is gone from the APP STORE (at least i'm not able to find it) i'd like to know how can I get it in a legal way to be able, if needed, to do a fresh install of Lion?
    Thanks in advance

    Apple Phone Sales 1-800-692-7753

  • How to install the lion if had an intel duo, it will be work? (black macbook only)

    hello there
    i need any help, i just want to know how to do with black macbook. so, i bought someone who owner with this black macbook from online. i received the macbook from the delivered and my boyfriend sets the upgrade for the lion osx for this black laptop. it says, this laptop had an intel duo. what i do to install the lion osx for intel duo other way? if cant, should i will replace the intel duo 2 for the lion osx? or should i go to see the apple store?

    thank you for answers and i went to the apple store yesterday. i talked with person about that macbook and they told me i cant upgrade the lion osx because of intel duo core without the number 2 with processor thats why. they suggest me that i need go to mac talk, inc and they could replace the new intel duo core 2 processor.

  • I have a mid-70's MacBook with OS X Lion installed. Can't loaf the new Maverick. Can I still load Snow Leopard at least.

    I have a mid-70's MacBook 13 inch with OS X LION installed. Won't accept the new Maverick. Can I still, at least, install Snow Leopard?

    ChuckPhilyaw wrote:
    I have a MacBook with OS X 10.5.8 ...
    The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs  >  http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
    Be sure to make a Backup of your Current System Before Upgrading...

Maybe you are looking for

  • Customer Service\HP Wont Send Me My Computer Back!!!!

    Today, I am writing because i am furious from getting off the phone with HP.  I am a college student and i really need my computer to get through my day, currently i only have access to the ones at the library. You know how inconvenient a computer at

  • [SOLVED] Problem with "su" and "login".

    Hi, I reinstalled Arch Linux today when I updated "filesystem" and reboot appeared an error with root device, but I solved with installation CD. I restarted laptop after solving error with root device when I went to XFCE4 and open a terminal I tried

  • Pros and cons of creating a table with key

    Hi Folks I have some tables where there is no key defined in the source system. What is the best way to build such tables. In my case the source system is Teradata. I have 25-30 columns in dimension and what is the best way to load this data where th

  • Apple wants me to pay for garageband although i already bought it!

    I bought garageband 1.2 on this ipad 2 on 12th of march 2012. last time i deleted it in order to get some space for ios-upgrade. Then i wanted to Download it again, but apple now wants money for it?! Furthermore, the app is not listed anymore in my "

  • Returning SAP standard error

    Hello, I have created an RFC to replicate the functionality of VLMOVE (movement type 313) for creating a delivery.For this I have used some standard performs and I able to create the delivery by passing the required inputs(plant,storage location,HU).