Black Magic External monitoring and Canvas Presets: Motion3

I have a Black magic card on my 3.0 quad intel. I am creating s Text commercial in Motion3. I have mixed the audio and imported that into Motion3. So, I am set up to create the entire project's visuals in Motion3.
My canvas is set to Broadcast HD 1080i60 because i didn't see 1080p60 and for this job i wanted to use something that is default.
I set the BM Intensity to to BM HD 1080i 59.94 and the HDTV is set to 1060i60 (via HDMI).
I get a tile in the middle of the lcd. Like 720p on a 1080p screen.
To get the best monitoring in my config how would i set up Motion3 , The BM Intensity , and maybe the HDTV also?
I am trying to avoid the jagged edges on the text and photo-wrinkles from down-scaling.
PS: i started in motion3 as DVCpro50 - 720p30.

What is the correct set up so that i can make PP default to sending the stream to the external on every project?
There is no way to set this on a project basis; it's per sequence. You must use one of the Blackmagic sequence presets to enable external monitoring from a sequence.
Also who do i set premier to dual screen editing?
I'm not positive, but this should be possible with the BMD card. However, setting up two desktop monitors is an OS setting, not necessarily a Premiere Pro setting. As long as you can expand your desktop over two monitors, you should be able to set up Premiere Pro and its various frames and panels to utilize both monitors. This is independent of full-screen external monitoring through the BMD.
In premier preferences under the media tab i see the intermediate media timebase ... Does this effect how Premier is handling my source footage? If not what does the window effect?
That dictates (or is supposed to, anyway) how imported media that does not have a specific timebase/frame rate should be handled on import. As far as I'm aware, this only affects image sequences--I've never seen it have any influence on an imported video or audio file. Even if it's set wrong when you import an image sequence, you can reinterpret the image sequence once it's in your project. Simply right-click it and select Modify > Interpret Footage. If you don't use image sequences, I think you can safely ignore this setting.

Similar Messages

FCP Problem with Firewire output to external monitor and speaker ???Help

i have a g5 powermac. the problem is when using Final cut pro 4hd. when i output my work through firewire to my external monitor and speaker i have a problem with the audio signal. Theres feedback/noise/hiss from the speakers. The firewire connects to DSR-11 vtr deck which feeds my monitor and speakers. it only happens when in FCP is set to A/V firewire output. does not happen if Video output is not set to firewire.
I Diagnosis is that it is not my dsr-11 deck or firewire i've ruled those out. The problem is either FCP software or Hardware problem with my G5
Does anyone have a similar problem. please respone, i will try to answer any respones,
Thanks
powermac g5 powermac

CaptM
From the firewire that feeds the dsr-11. on the output, i use s-video cable to my monitor (sony pvm-14l) and High Quality rca cables thet feed the audio to the Roland Speakers.
I've changed all wires and still have audio problem. I,ve changed my Dsr-11 deck to my camcorder and still have the problem.
If any of u guys use FCP The problem happens When I select view> external Monitor > and select firewire for Audio/ and video. I have never changed my editing habits, something just went wrong with the signal, I think its a Hardware problem with the firewire connection. I'm Going to have to bring this to a Apple Service Center In my local area one day.

Using the MacBook Pro with external Monitor and Keyboard

This may be a dumb question, but here it goes anyway:
Can I use the MacBook Pro with an external monitor and a bluetooth keyboard and mouse without having it opened all of the time ?
I am planning to buy a MacBook for my wife and most of the time she will be using it at her home office.
I don't want her to use the computer opened all of the time when she is actually looking at the separate screen and using a separate keyboard. Having the laptop opened will only accumulate dust and reduce the lifetime of the built in screen.
What I would actually need is a kind of "docking station", but Apple doesn't make that - I know.
So can the MacBook at least be operated without the internal screen powered on while it is closed?
Thanks for your help
Martin
Message was edited by: mdopp

Yes - it's called clamshell mode:
http://support.apple.com/kb/HT3131

Using the GT70 with external monitor and lid closed

I wasn't sure where to post this question.
I have several laptops and use external monitors. I close the lid on the laptops and the display continues to work.
On the GT70, the system shuts down. It won't allow me to use the external keyboard and mouse or display the session.
Any suggestions if there is a configuration option to allow the GT70 to continue to function with external monitor and lid closed.

Yup. This is a windows setting. You need to go into your control panel -> power options -> "Choose when the computer sleeps" and "Choose what closing the lid does"
That should solve the problem. I currently have my GT70 hooked up to a 42" TV and I can close the lid and it stays on and the TV continues displaying as well. No problems. =]

MacBook Pro with external monitor and keyboard.

Hello, everyone.
I've tried to find the answer for this question but haven't found a clear answer with my Google search.
My older Powerbook G4 will not allow me to work with an external monitor and keyboard with the screen in a closed position. I am about to purchase a new MacBook Pro and would like to be able to use it at home with a larger monitor and keyboard but with the lid closed and its built-in screen turned off. Can this be done ?
How can a MacBook Pro be used (turned-on) with external monitor and keyboard while the lid is closed and the its screen is off ?
Thank you in advance for your answers.
Joseph

Hi Niel,
I have the same problem with my MacBook and I followed the instructions you posted. My issue is that when the computer wakes up after clicking the buttons on the keyboard it then quickly goes back to sleep. I can't seem to keep it awake when the lid is closed. I've been searching for an answer without any luck. Any idea how to solve this problem?
Thanks!
P.S. After I finished posting this message I figured out my problem. While fiddling with my computer and monitor, I inadvertently disconnected the power. After reconnecting the power, I was able to wake my computer and keep it awake. A note to other people having this issue: the computer must be connected to a power outlet to run in closed mode.
Message was edited by: qwertyphd

External Monitor and LXDE

I run Arch + LXDE on my laptop and everything works great. Recently, I attempted to attach my laptop to an external monitor and use lxrandr to output only to the external. When I first tried it, the output worked fine but I was unable to adjust the resolution on the external monitor to anything greater than the best resolution I can get with my laptop. After restarting X, though, I was able to get max possible resolution on the external. However, this does not happen automatically, and every time I attach the monitor I have to reset the resolution to the best possible. Also, PCManFM only displays the desktop on a portion of my monitor equivalent to the laptop resolution (1280x800) even though the laptop monitor is disabled by lxrandr. The rest of the desktop is just openbox; when I right click on it, I get the openbox menu. Furthermore, when I attempt to switch to an agetty, the display is not aligned and most of the left side of the output is cut off. However, if I open the laptop, the agetty output works nicely there.
The agetty problem doesn't surprise me because that has nothing to do with Xorg, but it would be really nice if everything just worked. I have tried looking for similar problems (and solutions), but I can find very little information. I would like to have PCManFM put the desktop on the whole display, I would like to have the best resolution automatically when I plug in the external, and (maybe) I would like to be able to use the agetty terminals when I just want to work from the terminal.
Thanks!

I want to avoid setting up a xorg.conf file, and arandr works pretty much the same way as lxrandr. So I decided to write a simple script that I could run at startup to automatically set the resolution of all attached monitors to the maximum possible. Here is the script, and I can run it from /etc/xdg/lxsession/LXDE/autostart:
#!/bin/bash
query=`xrandr -q 2>/dev/null`
screens=`echo "${query}" | grep '^[A-Za-z].*' | sed -e '/^Screen.*/d' -e 's/[ \t].*$//g'`
c=0
for s in $screens; do
screenarr[$c]=$s
c=$(($c+1))
done
displaylines=`echo "${query}" | grep -n '^[A-Za-z].*' | sed -e '/^[0-9]:Screen.*/d' -e 's/:.*//g'`
c=0
for i in $displaylines; do
resline=$(($i+1))
res=`echo "${query}" | grep -n '.*' | sed -e "/^$resline:[ \t].*[0-9]/!d" -e 's/^[0-9].*: *//' -e 's/ .*//'`
if [ "$res" != "" ]; then
xrandr --output ${screenarr[$c]} --mode ${res} 2>/dev/null
fi
c=$(($c+1))
done
I wrote this really quickly so if anyone has an suggestions for improvement that would be great. I am hoping to generalize this so that you can pass it simple parameters to have some control as to how your monitors are configured. Also, if you have a better way to extract the monitor information than from xrandr -q and regex that would be a huge improvement.
When run from autostart before PCManFM, PCManFM fills the full screen with the desktop.

No video when using external monitor and resuming from sleep.

I know some people were having problems with the new MacBooks, but I guess the Mac driver fixed something. However, when I'm in Windows and have my Dell 24" hooked up to the Mini DisplayPort -> DVI adapter, I cannot resume from sleep. The monitor will turn on, but I can't get an image on it.
In MacOS it seems to resume from sleep fine, but not in Windows. Anyone else seeing this?
Thanks!

Is no one else getting this error? Does anyone have any issues when their MacBook is hooked up to an external monitor and it goes to sleep?

Preventing SLEEP when using External Monitor and Keyboard

Prior to Leopard, whenever I had an external monitor and keyboard attached and closed the MacbookPro lid the system would not go into SLEEP mode. Now it does.
What's to be done to prevent this from happening?

PS.... when this last occurred, the backup drive for Time Machine disconneted when SLEEP was invoke by closing the lid and did not reconnect when the system restarted.
I also received a 'warning' that a device was not disconnected properly.

No preview on external monitor and histograms black?

Hi, im having a problem with previewing. In the upper left room i see the footage (also changing when grading) but the rest of the rooms and my preview monitor are black. Histograms are not working.
Rendering and sending it to final cut works.
Im using a blackmagic decklink card for the output of the external monitor. Footage comes from the RED, 2K.
A colleague has the same mac pro but is using the older cinema screens. He has no problems. I use the new 24". Could that be the problem?
Does anyone has a idea what is going wrong?
Thanks.

Ummmm.....
mismatched display settings between COLOR and the BM card?
jPo

Newbie - External Monitoring and Media Prefs

i have a black magic card. I had gotten premier to send a signal via hdmi to my external 27inch monitor but it has just quit. At one time it would send the source monitor A/V but not the timeline.
What is the correct set up so that i can make PP default to sending the stream to the external on every project?
Also who do i set premier to dual screen editing?
In premier preferences under the media tab i see the intermediate media timebase is set to 29.97fps drop-frame. The footage i am using is 720p60.
Does this effect how Premier is handling my source footage? If not what does the window effect?

What is the correct set up so that i can make PP default to sending the stream to the external on every project?
There is no way to set this on a project basis; it's per sequence. You must use one of the Blackmagic sequence presets to enable external monitoring from a sequence.
Also who do i set premier to dual screen editing?
I'm not positive, but this should be possible with the BMD card. However, setting up two desktop monitors is an OS setting, not necessarily a Premiere Pro setting. As long as you can expand your desktop over two monitors, you should be able to set up Premiere Pro and its various frames and panels to utilize both monitors. This is independent of full-screen external monitoring through the BMD.
In premier preferences under the media tab i see the intermediate media timebase ... Does this effect how Premier is handling my source footage? If not what does the window effect?
That dictates (or is supposed to, anyway) how imported media that does not have a specific timebase/frame rate should be handled on import. As far as I'm aware, this only affects image sequences--I've never seen it have any influence on an imported video or audio file. Even if it's set wrong when you import an image sequence, you can reinterpret the image sequence once it's in your project. Simply right-click it and select Modify > Interpret Footage. If you don't use image sequences, I think you can safely ignore this setting.

Footage Freezing on External Monitor and Timeline

Hi,
I'm scratching my head over this. I have a Sony HD TV I am using as an external monitor to display Final Cut from by Macbook Pro (I know to get the best quality I should get a Matrox, but I can't afford it at the moment).
The macbook is hooked up to the TV via an HDMI convertor from the miniDisplay port. If I drag the canvas window onto the TV the footage (HD 720p, ProRes 422) plays fine.
However, if I try to play the footage using Digital Cinema Desktop Preview the footage freezes on both the TV and on the timeline - the audio plays fine though!
I simply cannot see why this could be happening. Does anyone have any advice - it would be very much appreciated!!

Pulled it onto a hard drive but it made no difference.
I managed to get it hesitatingly working by checking 'mirror on desktop' in audio/video prefs, but the video only plays for a few seconds then stops.
I have tried various different files and formats but they are all the same.
Unfortunately but I have to go out now but thanks for all your help so far - it seems I will have to do more head scratching and research tomorrow!

How to use two external monitors and Tecra M5

Hi ,
I've been used to work with two 17" monitors connected to a computer in extended desktop monitor view, ii've just changed Job and now i have the following setup:
a Toshiba Laptop connected to Toshiba Tecra M5 dockstation and one external 17" monitor connected to dockstation digital port that works fine.
I also have connected another external 17" monitor to the Dockstation RGB port but keeps black
I'ts really awful to work like this switching between the 17" monitor and the small toshiba laptop monitor.
What i'd like is to work with the two external 17" monitor, and keep the laptop monitor off, or if possible on.
Any ideas???
Any help will be very wellcome
Mari PAz

I have an M11-17V, and the docking station that came with it has 2 monitor outputs, analogue and DVI. I wondered what it would do if I connected a monitor to both. Windows recognised that it was faced with 3 screens (including the built-in one) and asked me to choose which 2 of the 3 I wanted it to use.
I was disappointed it would not allow me to use all of them TBH, but if your docking station is the same, it might answer your question.

Display goes black with external monitor

I teach and use the Macbook pro used in classroom hooked up to a projector with my dvi/vga connector. After about ten minutes of playing a DVD, the macbook's screen goes black. Movie keeps playing, can get the DVD control on screen BUT the screen on macbook pro never comes back. Plus the cursor, mouse on the projected screen doesn't function. Have to eject DVD, and restart the computer. Very annoying. Had the problem beofre, called apple, reinstalled system software. Was better until yesterday. Any ideas"?
macbook pro Mac OS X (10.4.3)

Mine is doing the same thing with a new 20" Cinema Display. Apple support got me to reset the power manager and zap the PRAM (the old standbys), but no joy. They acknowledged they know about the problem and are working towards a solution, but that was the limit of the conversation.
My tech guys thought it might be when attaching an external keyboard and monitor it might be putting the MBP display into closed lid mode, but using only the MBP's keyboard did not prevent the problem.
For me it tends to happen when I'm taxing the processor with PhotoShop or some other workhorse program. iTunes, too. I use dual display, not mirroring.
Additionally, moving stuff to the black MBP screen will cause a hard crash. Even the spinning beachball of death freezes. So be warned, save those open files before rebooting (Apple's current 'fix').
Coincidentally, my top right fan assembly was clicky/whiny right out of the box. Got that replaced under warranty and still have the display shut off issue. I had mused it might be the fan not working was causing the video processor to overheat and shut off, but no such luck.
Looking forward to a firmware/system update.

Internal display normal during start up but goes black with external monitor showing desktop

My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP.
My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

I found an article about the same issue. Screen looks exactly the same with bloated apple logo.

VGA output jumps between External Monitor and Satellite L505

I have a Satellite L505-144 linked to an external VGA monitor via a 2 way Aten KVM switch.
Intermittently the external monitor screen will go black, the picture will transfer to the laptop monitor for a second before reverting back to the external monitor. This does not seem to be triggered by any particular keyboard or mouse action and does not seem to be time linked.
The keyboard and mouse connected to the KVM seem unaffected. I have the latest video, motherboard bios and all the latest Toshiba released drivers loaded.
To test the KVM I have connected up a Toshiba NB200 in place of the L505, the problem stops, replace the L505, it comes back.
The issue is not effected by having a second PC connected to KVM. I have tried with a second PC on and off, connected and unconnected, still no change to the problem.
I have switched the KVM cables around and the problem persists and follows the L505. If I connect the L505 directly to the monitor the problem goes away!
I can conclude its an issue between the KVM and the L505.
Is there a known fix or work around?
Is there any guarantee if I get say a Belkin KVM this issue with the L505 will not occur with that equipment as well?

At first I must say that I dont think Toshiba will offer fix for this. Toshiba doesnt support usage of third part products so if there is some possible fix or work around ATEN should know this.
Connect all external devices you use directly on your Satellite L505, test functionality and let us know f you have some similar or any other problem.

Black Magic External monitoring and Canvas Presets: Motion3

Similar Messages

Maybe you are looking for