Black Magic HD Extreme capture problem

I recently switched from a PowerPC quad to a Macpro.
Blackmagic card worked 100% in the Quad.
So I installed the Blackmagic HD Extreme into the Macpro.
Now I have constant problems when I go to log and Capture. The card does not recognize the input source. I have to close out of FCS, reboot, re launch, re- launch L&C, etc..over and over and again until it eventually sees the source.
I updated the drivers- check prefs, ran disk utility, etc
Blackmagic support is stumped.
(In fact- I tried to launch L&C for 30minutes- called BM support while I continued to try and get it to work. As soon as I got the guy on the phone- I was able to get it to launch!
Like I said- I do nothing major to change any settings- sometimes it sees the source and sometimes it doesn't.
(My Source and Easy set-up is always the same.)
Please- what the heck is going on here. It's making me crazy.
Would AJA work better the Macpro?

Pose your question here:
http://forums.creativecow.net/forum/blackmagicdesigndecklink
A forum dedicated to Decklink cards.
Shane

Similar Messages

  • Black Magic vs. DVD Pro

    At my place of work we have the Black Magic 10 Bit Capture cards. But somtimes when I use the blackmagic compressed mov files with DVD Studio Pro I come across interlacing problems after the DVD is burned and I view it back on an ordinary NTSC monitor. This happens almost every single time. The movie files are jumpy and glitchy during playback. Any thoughts on why this is? Is it because I'm importing the mov file straight into DVD Pro without using Compressor? Or could it be a DVD Pro or buring glitch?
    What's the best kind of capture card/ compression that is best used with DVD Pro??
      Mac OS X (10.4.3)   DVD Pro 4

    It could be a field order problem. Try switching the field order setting opposite from what its currently set to in Compressor. If Upper first, then try Lower, vice-versa. then encode your clip.
    -k

  • Mac Mini (Black Magic) Powerful Enough?

    Well I'm going to be buying my mac mini very soon, but I do have some concerns. I want to be able to stream, and upload videos to youtube, with the black magic extreme (link below) will the mac mini be able to handle these needs? I'll be getting $599.00 version, but I'll be updating the memory to kingston 8gb ddr3. (link below)
    Black Magic Intensity Extreme
    http://www.amazon.com/Blackmagic-Design-Intensity-Extreme-Solution/dp/B006OQ49PQ /ref=sr_1_5?s=electronics&ie=UTF8&qid=1330208316&sr=1-5
    Kingston 8GB DDR3
    http://www.amazon.com/gp/product/B001PS9UKW/ref=cm_cr_asin_lnk

    i havent streamed or used the black magic, but you might want to consider the quad core mini. I was able to bog down the base model with some video editing. Im happy as a clam now with my quad 2.0
    you might also want to consider getting two 8gb memory modules instead of two 4gb. Or at least one (for 12gb). I sometimes often saturate my 8gb, paging out. I will be getting those two 8gb eventually (as in before the summer is out.)

  • Black Magic Capture Card

    Hi Everyone,
    I'm about to order a Black Magic card because I can't seem to output DV or HDV to my Sony GV-HD700 deck. Am I correct in believing this will solve my issue, and are Black Magic users happy with the card?
    Thanks
    Boxcar

    I'm happy with my BMD HD Extreme card. But I'm not sure that will fix your output problem. I noticed on Sony's website that the specification section for your model does not list Leopard as compatible. It only goes as high as OS X 10.1. My guess is that might be the problem. Also, double check the output settings in Final Cut to make sure you're setup for DV.

  • Black magic card a/v settings for capture??????????????????????

    So I have a black magic intensity pro card. I am trying to use it with my JVC HDV 720p 60fps camcorder. I know I need to lower the setting to have it actually work without a ton of raid cards and so I have the "A/V Settings" set to:
    Sequence preset: Black magic HDTV 720p 60 - Jpeg
    Capture preset: Black magic HDTV 720p 60 - Jpeg
    Device Control preset: Non-controlable device
    Which is what everything I have read has said to do, but it refuses to work I get an error saying there is no video coming through the audio meeter does not even bounce in preview. It is not the cables I have tested both. What else could it be?

    I also have the intensity settings in the mac system preferences set to y, r-y, b-y video & analog RCA Audio.
    I am still stumped!

  • Adobe not allowing import of XML file captured from Media Express through Black Magic capture card

    I have been going crazy trying to find a way to import the XML files to fix the digitized look Adobe capture gave my footage. Someone help me
    These are not XML from Final Cut. They are files saved from Media Express, a Black magic design program used for Capturing.
    THANK YOU.
    Please email me if you know how to fix this
    [email protected]
    THANKS AGAIN!

    Wouldn't it be more appropriate to open the actual media files captured with the program?

  • What is the BEST cable connection from Canopus ADVC 300 to Black Magic Intensity Pro HDMI PCI Express Capture Card?

    I must connect an ADVC 300 to a Black Magic Intensity Pro HDMI PCI Express Capture Card.   For best quality, which cable should I use?
    On the ADVC 300 there are outputs of firewire, S-VHS and RCA.
    On BMPro it's a little confusing. On the breakout cable there are connectors that say:
    -5 B-Y OUT
    -4 Y OUT
    -3-R-Y OUT
    -7-R-Y IN
    -8-Y IN
    -9 B-Y IN
    -15 AUDIO IN RIGHT
    -10 AES/EBU OUT
    -12 AUDIO LEFT OUT
    -14 AUDIO LEFT OUT
    -13 AUDIO RIGHT OUT
    With the BMPro, there is also a separate, shorter cable.  On one end it looks like S-VHS and on the other there are two connectors, one black and one blue.
    On the actual BMPro Express card strip instead of using the breakout cable, there is HDMI IN (and HDMI OUT). 
    How should I connect this?  Is there an adapter cable of FIREWIRE TO HDMI? 
    Any help is much appreciated. 

    Well, when I researched how best to digitize VHS (into Final Cut Pro 7), I learned two of the best devices to use are BMPro and Canopus ADVC 300.  I’m using the ADVC 300 for the built-in time base corrector.  I definitely want to use that to stabilize the video.  I also read how well BMPro improves image quality.  So, I thought to use the two together must produce outstanding quality (well, as good as VHS can be). 
    Perhaps I got confused into thinking I can use both.  But the BMPro appears to have an S-VHS adapter. 
    I guess I’m wondering what is better quality: 
    Run the firewire from the Canopus ADVC 300 converter directly into the firewire port on the Mac Pro
    Or, run an S-VHS cable from the Canopus ADVC 300 into the BMPro Capture card
    (I should mention that I have purchased all these items and already have the BMPro Card installed so at this point it’s not a cost issue, but rather an issue of simply which works best?)

  • Capturing at 24 fps with Black Magic Decklink Studio

    I keed capturing video at 24 fps.  I would rather be at  29.97 fps. How do I get to that level.  The black magic is set to NTSC.

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • Setting Premiere Pro with Black Magic extreme Tunderbolt/HDMI

    Normally I work with Avid but, like everybody else, I think Premiere Pro holds the future. So I am working on that.
    Question is, I have a Black Magic Extreme with Thunderbolt connected through my Pegegasus raid system. With Avid it works BUT with Premiere Pro it doesn't. So what am I doing wrong?

    Hi,
    I recommend watching this how to setup Blackmagic with Premiere Pro video if you haven't already.
    Black Magic Design I/O Hardware Setup for Premiere Pro CS6 - YouTube
    If you're still having troubles getting Blackmagic hardware working please let us know and we can run through other steps.
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

  • Black magic specialist in canada +91-9914703222

    1. Like jadu-tona.9914703222
    2. Business related problems.
    3. Husband and wife relationship.
    4. Be free from enemy / 2nd wife
    5. Settle in foreign.
    6. Desired love.
    7. Disputes between husband / wife.
    8. Problems in study.
    9. Childless Women.
    10. Intoxication.
    11. Physical problems.
    12. Domestic controversy.
    13. Problems in family relations.
    14. Promotions or willful marriage.
    15. Lottary & lucky nomber
    16To Get your love back "
    17To make your or your partner’s parents to Love Marriage
    18get your love back by black magic
    19:vashikaran mantra for love
    20how to get my ex-back
    21To Control the mind of husband/wife or a desired person.
    22To Wealth and Peace in Home
    23To Kundli and Match Making
    24get your love back by islamic vashikaran
    25To solve the problems between any Relationship
    26VASHIKARAN, LOVE LOST, HUSBAND/WIFE DISTRIBUTE,
    27:vashikaran mantra for husband
    28To attract any Girl/Boy towards you with heart.
    29To make your or your partner’s parents to Love Marriage
    30:To improve professional and personal relationships with others.
    31:To win favors from others, exert pressure and control over them, and get what you want from them.
    32To create a good impression on others and create love and affection in their hearts and minds.
    33Dispute with Husband or Wife, HAR SAMSEYA KA SMADHAN PAYE
    Contact: +91-9914703222
    E-mail:[email protected]

    I ran across this thing the other day. http://greatscottgadgets.com/throwingstar/
    $15 for the kit $40 for assembled. I made the same thing for like $.05. Took some cat5E cable, one had a broken end so I cut that off and it become the monitor lead.
    I set it up with a desktop, router, laptop. Ran ping -T to router and captured it all on the laptop.
    Connect 2 systems to the blue cable, the monitor system connects to the gray cable.

  • Has anyone used the Black-Magic Design Multi Bridge?

    Currently I have a Black Magic Multi Bridge Extreme. It works, but there seems to be an issue with a very (hot) running unit. The fan is running (very loud I might add), and does seem to cool down the unit, just a bit. If there is anyone using this or simular unit, could you provide some feed back. Thanks

    brett austin wrote:
    I've got a new Mac Mini running HDMI to a 40" Sony Bravia Flat Panel... works fine.
    I do have an issue when I turn on the TV and wake the Mini from sleep... the screen stays really dim. Not sure if it's the Mini or the TV that's the issue. After the Mini is fully on... a power cycle of the TV seems to bring everything back to normal.
    Brett, I have the same problem when I bring the mac out of sleep mode. Have you managed to find out why we have to switch the TV Off then On again to get the picture? Or another solution? Very annoying when you have 1000's $ worth of equipment but the solution is still "Have you tried switching it Off and On again" (All due respects to the "IT CROWD").

  • Importation impossible de fichier black magic dans premiere cc

    Bonjour, il m'est impossible d'importer des fichiers AVI dans premiere cc.
    Ces fichiers proviennent d'une capture via media express de intensity pro, en 8 bit YUV, acquisition analogique....
    Premiere les importe et ensuite ferme de manière imprevu...
    IL est à noté que windows media ne lit pas ces fichiers....
    Merci de vos reponses

    hello, merci d'avoir rrepondu,....black magic est la carte d'acquisition, la intensity pro....j'ai fait des acquisitions via cette carte, même si j'aurai pu le faire à partir de premiere cc..
    Oui Premiere est à jour...version CC (cs7)....
    Je fais une acquisition via l'analogique.....intensity pro marche très bien et les projets 8bits sont bien intégrés dans première tout est nickel....
    Lorsque j'importe ces fichiers même sans séquence, voilà lme message d'erreur:
    Adobe premiere à cesser de fonctionner...un problème a fait que le programmme a cessé de fonctionner...
    Voilà;...lorsque je fais l'acquisition dans premiere à partir de la BMagic, pas de probleme.???

  • Black Magic Intensity Pro Play only Audio when edit in CS 5.5

    Hi i have an problem, when i try to edit with Black Magic Intensity Pro in premiere CS5.5
    i can play only Audio but not Video so i check settings on Premiere and control panel for
    Black Magic Intensity and everything is OK and i check connections the preview is connect
    via HDMI cacle and Composite Video/Audio and in both cases i get only Audio but no Video
    so what is the problem? An driver for Black Magic Intensity Pro issue or what?
    Current driver version is 8.2.1
    Thanks.

    Thanks i already do that and nothing,again only audio no Video.
    I tray to play with integrated software Media Express who comes
    with driver and working good.
    So what is the problem the driver or Premiere CS5.5?

  • लव Vashikaran =786= लव Black magic specialist molvi ji+91-9829394706

    LOVEMARRIAGESPECIALIST.ORG +91-9829394706=VASHIKARAN SPECIALIST BABA. vashikaran specialist baba give highly remedies for love marriage, vashikaran, black magic, to get your love back again in life etc. vashikaran is a power by which one man/woman can attract anyone in life,,and that body will do as you say. by help of vashikaran astrology you can get all things in life like: you can do willfull marriage with your lover ( boyfriend /girlfriend) can get your lost love back in life by vashikaran… there are many types of vashikaran like mohini vashikaran, stri vashikaran, kamdev vashikaran etc, if you want to get help of world famous vashikaran specialist baba so dont waste your time and immediately call +91-9829394706 astrologer baba at he will give you a perfect solution of your every kind of problem like: love marriage problem, vashikaran specialist, black magic solution, graha klesh, karobar,intercast love marriage problem solution, vashikaran mantra for love marriage, vashikaran mantra for love, career problem solution, vashikaran astrology, vashikaran mantra, business problem solution, santan samasya (childless problem solution), lal kitab upay, indian vashikaran, black magic specialist, spell of black magic, etc. baba ji is the most famous indian astrologer love marriage vashikaran specialist baba. if you have any problem with marriage life so dont worry baba ji give you solution of your relationship problem… he provides highly effective astrological and related solutions for all problems of one's life like Love affairs, Love marriages, vashikaran for love,Health problems, Business Problems, Black magic (Jadu-Tona ) Problems and other related problems in Relationships. We solves all your Problems by Astrology, Horoscope, Hypnotism, Black Magic, mantra tantra etc. Vashikaran is the best way to get your dreams, because vashikaran astrology works like Hypnotism, mind wash. Now this can be haapen on vashikaran specialist baba. Get lost love back by vashikaran Girl woman boy vashikaran specialist aghori baba, Fast vashikaran love vashikaran specialist, black magic specialist baba, love marriage specialist world famous astrologer ….. Vashikaran specialist baba call + Black magic specialist baba Love marriage specialist babaji Love marriage problem solution Intercast love marriage problem solution Love marriage with parents approval Love vashikaran specialist baba Vashikaran mantra specialist Vashikaran mantra for love marriage Vashikaran mantra for husband/ wife World famous vashikaran guru Famous Indian astrologer vashikaran specialist Get your love back by vashikaran Get your love back by black magic Get your ex back in life Childless problem solution Financial problem solution Be free from enemy All type of problem solution by astrology Divorce problem solution Vashikaran specialist Control your lover in hand by vashikaran Marriage life problem solution Black magic spells Black magic. woman Lost love spells Voodoo love spells Voodoo doll for love attraction Vahikaran specialist astrologer Powerful vashikaran shabari mantra Powerful money spells Lottery no. specialist . black magic love marriage specialist Baba mantra for love,get love back specialis +91 9829394706 Spell/BLACK MAGIC AND V A S H I K A R A N Specialist.. If you believe in the power of Magic your dreams can come true. So be it! We all have needs in life and Magic can help fulfill those needs.Spells, white magic, ceremonial magic, incantations, candle magic, black magic, conjuration's, and invocations. It's all here to help you through life . My children i'll not say "that i m the Best, i am the only person who can solve your problem," Becoz i am not the GOD but if i'll work hard and pray for you in a proper systematic way,the GOD definately will give me the result of my hard work...and i'll help you to fullfill your goals,Dreams and everything you want...With the help of 'AGHORI Tantrik SIDHI' BABAji solve your any kind of problems related to :- aghori baba ji black magic ruhani ilem sipli ilem ke mahir -can you solve/// the problem with vashikaran, -totke for kill enemy in hindi, -love chants spells, -totke for early marriage, -prayers and chant love spells, the vashikaran specialit| hasband wife problem solution|vashikaran baba ji | all problem solution here aghori babaji SOLUTION WITH 101 % GUARANTEE EXPERT IN YANTRA-LOVE AND BLACK MAGIC Vashikaran expert HYPNOTISM. baba ji full aghori sadhna will solve any problems. love marrige Problems are solved by some are following : want back your old love any type of hypnotism and black magic get your love back by vashikaran voodoo love spell by aghori baba ji withcraft specialist by aghori baba ji. love hipnotysm black magic specialist love problem……family problem husband/wife problem coUrt case.job===promotion kundli dos mangalik dos dou/in/law/father in/law mother in law LOVE MARRIAGE GET THE SOLUTION all problem solution CONTACT +91-9829394706

    تكييف هاي سينسهاى سينس hisense ( 01096922100 – 0235699066– 01210999852 – 0235710008– )نقدم لكم الشركة العالمية الاولى هاى سينس hisense لتصليح الماركات ( الامريكية _ الالمانية_ والايطالية ) ومتاح لدينا مهندسين فنيين ذو قدرة فائقة على الاصلاح لحل جميع المشاكل والاعطال الاجهزة الكهريائية واصلاح بالمنزل تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense وتصليح الاجهزة المستوردة من الخارج وتجديد الجهاز من الاول ونقدم لكم خدمة عملاء يوميا من السبتالى الخميس من الساعة 9 الى الساعة 6 فى انتظاراتصالاتكم على ( 01096922100 – 0235699066 –01210999852 – 0235710008 – ) ويتوافر لدينا كول سنتر للمتابعة كل 3شهور ويوجد لدينا ضمان لمدة عام كامل وقطعغيار اصلية ذو جودة عالية hisensehisense hisense hisense...

  • I want to use my Black magic Multi-Brigde Pro with Premiere. That is possible correct?

    I want to use my Black magic Multi-Brigde Pro with Premiere. That is possible correct?

    Hi PragueGolem.
    Yes, it's possible to use the Blackmagic Multibridge Pro with Premiere but it's also complicated to use the card with video and audio together.
    I use a mac pro with the Multibridge Pro 1 and need to use an audio card too, because the card makes always problems with audio in Premiere CC.
    In the audio hardware settings tab you have no selection possibility for the card. You have to select your standard system audio and to route this in Premiere. In your system audio panel you have the multibridge as standard card set.
    Only for a short time it was possible for me to use the card with audio and video but after the last Premiere update I have to use the audio card again. I spend to much time in optimize my system to work well with the card and heard to many people have trouble with Premiere CC and the Multibridge Pro Card. In Premiere Pro it wasn't a problem at all...
    Regards,
    Flo.

Maybe you are looking for

  • I get a blank new window when I try to view a pdf online

    I get a blank window when I try to view a pdf online

  • Use CLOB & Ref Cursor

    Hi, Can some one help. I am getting string more than 32767 char so I want to use CLOB but I am unable to use in ref Cursor. CREATE OR REPLACE PROCEDURE PM.PROC_CURSOR_BTDCS (P_QUERY IN varchar2, P_batchid out Number) AS P VARCHAR2(32767); P_CURSOR_QU

  • Planning Function to update Fiscal Period Characteristics

    Hi, Is it possible to write a Planning Function that would update empty Fiscal Period Characteristics from the already populated 0CALMONTH Characteristic?  I know the ABAP required if I can use it, but I'm just wondering about IP having the ability t

  • Conditions from contract to PO

    Hello, I want to create some HEADER conditions in a contract. This condition is a PERCENTAGE condition. So i want for example when the release order is from 10-20 euro to have discount 5%, from 21-50, 7% etc. What is the appropriate customiizng for t

  • I need a replacement pair of headphones for my Ipod touch

    My apple headphones have stopped working . I read another forum and answer and clicked on the link to try to fill out the application to get my free replacement headphones but when I got to the page I didn't know what to do after I entered my softwar