Black magic ultra studio 4K

Friends,
Can anyone tell me the real advantages of using an external video card like blackmagic ultra studio 4K?
I'm using FInal Cut Pro X in my 27" 3.2 Ghz iMac witha 32GB of memory.
Normally I work with 4K / 5K RED footages.
Do you think it speeds up the video processing if we use an ultra studio 4K?
My doubt is other than the multiple output options, will it do an extra processing for an application like Final Cut Pro X?
Thanks in Advance,
Sreekumar

let me clarify this.
since I'm working with 4K or 5K images and my projector is a 1920*1080, if I use an ultra studio 4K, the images appearing will have more detail than connecting through my display port? is the how pixel-by-pixel works?
the monitor I;m using is a 2560*1440 resolution. which is better? connecting though the display port or through the ultra studio 4K?
Whats the real advantage of using this card when I use Final Cut Pro X for colour grading.
Will this card acts like an internal card we used earlier?

Similar Messages

  • Capturing at 24 fps with Black Magic Decklink Studio

    I keed capturing video at 24 fps.  I would rather be at  29.97 fps. How do I get to that level.  The black magic is set to NTSC.

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • Black Magic Decklink Studio 2 and CS6

    Hi, all.  I've been doing this for years and am always amazed at how complicated it is capturing video and audio with Premier.  Now, with CS6 and Black Magic Design's Decklink Studio2, it's no different.  The Black Magic capture utility works fine, but Premier won't recognize the card and it's drivers.  I can't build a capture list, but use the BMD utility to capture video for editing. 
    Experience says reload drivers.  I  did that.  Also loaded latest BMD drivers.  Still no capture in Premier.  One giant challenge is our company's IT department retains admin rights to this Windows7 64 bit Dell Precision 7730.  I have to open a trouble ticket to change or load anything! 
    Anyway, any thoughts on this would be much appreciated.

    Mr. Bowen.  Thanks for the quick response.  Settings in Premier are limited.  The BM board has its own control panel.  But here is the setup:
    NTSC, 29:97, RS422 machine control, use capture time code.
    Premier takes in our HD P2 material just fine.  Also just about every flavor of AVCHD.  Trouble is we use a ton of vintage footage originating from RS422 machines: everything from s-vhs, ¾” and BetaCamSP.  Bottom line is it crashes EVERY time we try to use the capture function.  There’s machine control, but no capture window showing.  Obvious driver conflicts of some kind.   ☹
    Doug
    PGE Media

  • Black Magic Intensity Pro Card & Final Cut Studio

    I'm in the process of purchasing a Mac Pro to use for my New Wedding Video Business. I have purchsed the New Sony HVR-HD1000. I'm looking to get everything at one time and something has me very confused. I hope that someone can please help me.
    As I understand it. I take my New Sony HD Cam via Firewire800 and Final Cut Studio will just suck it all in.
    If thats the case, What is the need for products such as the "Black Magic Intensity Pro Card"?
    Do I need it when my Mac Pro/Final Cut will import my footage anyways?
    Please help me make a sound decision.
    Thank you for your time.

    No disrespect taken. I might not be very technical but some times I wonder if I'm doing the right thing.
    Maybe some history will help explain my situation.
    I have a old cheap-o hand held Sony SD Mini DV Cam that I used all year to puts around with. As a test of my skills went to weddings and events for fun. All of these events had "Professional Videographers" I was just here for fun with my little camera.
    For fun I would turn in my little DVD and the response was incredible. Even though my footage sucked compared to all the "Pro Cameras" being used it was my skills in editing, having fun with the video, and using lots of Motion graphics and titles. I became so popular that people wanted me to actually film events as a paid rig!
    With no training what so ever and just tinkering with Final Cut Studio - I have a long list of "word of mouth" gigs with people waiting for me to film for them.
    My parents then decided to give me a few gifts. (1) Sony HVR-HD 1000 and (2) JVY GY100HD Cameras. I now have all the gear I need. I never owned cameras like this before so as I started looking into getting a Mac Pro - All these questions came to mind.
    My point is - I used a POS camera and consumers ate it all up. I didnt worry about "Color Space" or ProRess anything. I just imported as DV - edit the footage - have fun with it - burn it on DVD and call it a day.
    I'm just seriously asking - now that I have nice cameras that didnt cost me a dime - cant I just continue the same way I have been with my POS camera?
    Is anything more than just Firewire800 to my Mac really that critical for Weddings on SD DVD's?

  • Black Magic Intensity Pro Card

    I'm in the process of purchasing a Mac Pro to use for my New Wedding Video Business. I have purchsed the New Sony HVR-HD1000. I'm looking to get everything at one time and something has me very confused. I hope that someone can please help me.
    As I understand it. I take my New Sony HD Cam via Firewire800 and Final Cut Studio will just suck it all in.
    If thats the case, What is the need for products such as the "Black Magic Intensity Pro Card"?
    Do I need it when my Mac Pro/Final Cut will import my footage anyways?
    Please help me make a sound decision.
    Thank you for your time.

    A few things to remember:
    The best resolution you will get with your HD camcorder is to record LIVE from the camera to the Intensity card connected via HDMI. No compression (HD to HDV) will occur in the camera before the computer sees it. You can either record uncompressed (best) or have FCP/Premier record with a codec (422, etc.). 422HQ is supposed to be "visually" the same as uncompressed HD but requires significantly less space. Recording HD uncompressed REQUIRES Raid disk setups. Depending on your setup, you may require Raid with with 422. The down side for this highest resolution mode is you MUST have your computer hooked up to the camcorder via HDMI to the Intensity card while recording! Not typically feasible when doing live events and being mobile with your camcorder.
    The second best MAY be playing back the recorded video (HDV compressed onto the tape) via the HDMI (not firewire) to the Intensity. Here it depends on the quality of the codec INSIDE the camcorder vs. the software codec in the computer. The advantage with an Intensity card here is that you can record onto the computer using a more "editable" format (see below).
    The third best (may be just as good as the second above) is to transport the recorded video (HD compressed) via firewire from the camcorder directly to the mac. The only difference from two above is how good the software codec on the mac is compared to the camera. Opinions vary here.
    Editing the DV/HDV directly is often near impossible - meaning it must be recorded (converted) on the hard disk in a more editable format. Long GOP issues arise often/sometimes with DV/HDV (MPEG 2).
    Method 2 and 3 allow for portability. Method 1 is NOT portable/mobile.
    G

  • FLME compatible with Black Magic Card?

    Hello
    Does Flash Media Live Encoder is compatible with the cards :
    acquisition card BLACK MAGIC DESIGN DeckLink Studio
    acquisition  card AJA KONA-LHe
    Someone has already tested?
    Thanks for your Help
    Best regards
    Jerome Hutain

    Thanks
    I found this information on OSMF website
    Now, i am sure it works.
    Thanks for your help
    Best regards
    Jerome
    *"Additional Capture card certification: Blackmagic
    Decklink<http://www.blackmagic-design.com/products/decklinkhdextreme/>+
    AJA Kona
    (formally Xena) <http://www.aja.com/products/kona/index.php>"*
    2011/4/15 tarnic86 <[email protected]>
    In my opinion, if the driver of your new BlackMagic card are compatible
    with your operative system, and installed correctly, FMLE uses it as any
    other peripheral, so it should work.
    Maybe you can ask to their support to be sure...
    >

  • Black Magic vs. DVD Pro

    At my place of work we have the Black Magic 10 Bit Capture cards. But somtimes when I use the blackmagic compressed mov files with DVD Studio Pro I come across interlacing problems after the DVD is burned and I view it back on an ordinary NTSC monitor. This happens almost every single time. The movie files are jumpy and glitchy during playback. Any thoughts on why this is? Is it because I'm importing the mov file straight into DVD Pro without using Compressor? Or could it be a DVD Pro or buring glitch?
    What's the best kind of capture card/ compression that is best used with DVD Pro??
      Mac OS X (10.4.3)   DVD Pro 4

    It could be a field order problem. Try switching the field order setting opposite from what its currently set to in Compressor. If Upper first, then try Lower, vice-versa. then encode your clip.
    -k

  • Black magic card a/v settings for capture??????????????????????

    So I have a black magic intensity pro card. I am trying to use it with my JVC HDV 720p 60fps camcorder. I know I need to lower the setting to have it actually work without a ton of raid cards and so I have the "A/V Settings" set to:
    Sequence preset: Black magic HDTV 720p 60 - Jpeg
    Capture preset: Black magic HDTV 720p 60 - Jpeg
    Device Control preset: Non-controlable device
    Which is what everything I have read has said to do, but it refuses to work I get an error saying there is no video coming through the audio meeter does not even bounce in preview. It is not the cables I have tested both. What else could it be?

    I also have the intensity settings in the mac system preferences set to y, r-y, b-y video & analog RCA Audio.
    I am still stumped!

  • Adobe not allowing import of XML file captured from Media Express through Black Magic capture card

    I have been going crazy trying to find a way to import the XML files to fix the digitized look Adobe capture gave my footage. Someone help me
    These are not XML from Final Cut. They are files saved from Media Express, a Black magic design program used for Capturing.
    THANK YOU.
    Please email me if you know how to fix this
    [email protected]
    THANKS AGAIN!

    Wouldn't it be more appropriate to open the actual media files captured with the program?

  • Black Magic Intensity Pro Play only Audio when edit in CS 5.5

    Hi i have an problem, when i try to edit with Black Magic Intensity Pro in premiere CS5.5
    i can play only Audio but not Video so i check settings on Premiere and control panel for
    Black Magic Intensity and everything is OK and i check connections the preview is connect
    via HDMI cacle and Composite Video/Audio and in both cases i get only Audio but no Video
    so what is the problem? An driver for Black Magic Intensity Pro issue or what?
    Current driver version is 8.2.1
    Thanks.

    Thanks i already do that and nothing,again only audio no Video.
    I tray to play with integrated software Media Express who comes
    with driver and working good.
    So what is the problem the driver or Premiere CS5.5?

  • What is the BEST cable connection from Canopus ADVC 300 to Black Magic Intensity Pro HDMI PCI Express Capture Card?

    I must connect an ADVC 300 to a Black Magic Intensity Pro HDMI PCI Express Capture Card.   For best quality, which cable should I use?
    On the ADVC 300 there are outputs of firewire, S-VHS and RCA.
    On BMPro it's a little confusing. On the breakout cable there are connectors that say:
    -5 B-Y OUT
    -4 Y OUT
    -3-R-Y OUT
    -7-R-Y IN
    -8-Y IN
    -9 B-Y IN
    -15 AUDIO IN RIGHT
    -10 AES/EBU OUT
    -12 AUDIO LEFT OUT
    -14 AUDIO LEFT OUT
    -13 AUDIO RIGHT OUT
    With the BMPro, there is also a separate, shorter cable.  On one end it looks like S-VHS and on the other there are two connectors, one black and one blue.
    On the actual BMPro Express card strip instead of using the breakout cable, there is HDMI IN (and HDMI OUT). 
    How should I connect this?  Is there an adapter cable of FIREWIRE TO HDMI? 
    Any help is much appreciated. 

    Well, when I researched how best to digitize VHS (into Final Cut Pro 7), I learned two of the best devices to use are BMPro and Canopus ADVC 300.  I’m using the ADVC 300 for the built-in time base corrector.  I definitely want to use that to stabilize the video.  I also read how well BMPro improves image quality.  So, I thought to use the two together must produce outstanding quality (well, as good as VHS can be). 
    Perhaps I got confused into thinking I can use both.  But the BMPro appears to have an S-VHS adapter. 
    I guess I’m wondering what is better quality: 
    Run the firewire from the Canopus ADVC 300 converter directly into the firewire port on the Mac Pro
    Or, run an S-VHS cable from the Canopus ADVC 300 into the BMPro Capture card
    (I should mention that I have purchased all these items and already have the BMPro Card installed so at this point it’s not a cost issue, but rather an issue of simply which works best?)

  • लव Vashikaran =786= लव Black magic specialist molvi ji+91-9829394706

    LOVEMARRIAGESPECIALIST.ORG +91-9829394706=VASHIKARAN SPECIALIST BABA. vashikaran specialist baba give highly remedies for love marriage, vashikaran, black magic, to get your love back again in life etc. vashikaran is a power by which one man/woman can attract anyone in life,,and that body will do as you say. by help of vashikaran astrology you can get all things in life like: you can do willfull marriage with your lover ( boyfriend /girlfriend) can get your lost love back in life by vashikaran… there are many types of vashikaran like mohini vashikaran, stri vashikaran, kamdev vashikaran etc, if you want to get help of world famous vashikaran specialist baba so dont waste your time and immediately call +91-9829394706 astrologer baba at he will give you a perfect solution of your every kind of problem like: love marriage problem, vashikaran specialist, black magic solution, graha klesh, karobar,intercast love marriage problem solution, vashikaran mantra for love marriage, vashikaran mantra for love, career problem solution, vashikaran astrology, vashikaran mantra, business problem solution, santan samasya (childless problem solution), lal kitab upay, indian vashikaran, black magic specialist, spell of black magic, etc. baba ji is the most famous indian astrologer love marriage vashikaran specialist baba. if you have any problem with marriage life so dont worry baba ji give you solution of your relationship problem… he provides highly effective astrological and related solutions for all problems of one's life like Love affairs, Love marriages, vashikaran for love,Health problems, Business Problems, Black magic (Jadu-Tona ) Problems and other related problems in Relationships. We solves all your Problems by Astrology, Horoscope, Hypnotism, Black Magic, mantra tantra etc. Vashikaran is the best way to get your dreams, because vashikaran astrology works like Hypnotism, mind wash. Now this can be haapen on vashikaran specialist baba. Get lost love back by vashikaran Girl woman boy vashikaran specialist aghori baba, Fast vashikaran love vashikaran specialist, black magic specialist baba, love marriage specialist world famous astrologer ….. Vashikaran specialist baba call + Black magic specialist baba Love marriage specialist babaji Love marriage problem solution Intercast love marriage problem solution Love marriage with parents approval Love vashikaran specialist baba Vashikaran mantra specialist Vashikaran mantra for love marriage Vashikaran mantra for husband/ wife World famous vashikaran guru Famous Indian astrologer vashikaran specialist Get your love back by vashikaran Get your love back by black magic Get your ex back in life Childless problem solution Financial problem solution Be free from enemy All type of problem solution by astrology Divorce problem solution Vashikaran specialist Control your lover in hand by vashikaran Marriage life problem solution Black magic spells Black magic. woman Lost love spells Voodoo love spells Voodoo doll for love attraction Vahikaran specialist astrologer Powerful vashikaran shabari mantra Powerful money spells Lottery no. specialist . black magic love marriage specialist Baba mantra for love,get love back specialis +91 9829394706 Spell/BLACK MAGIC AND V A S H I K A R A N Specialist.. If you believe in the power of Magic your dreams can come true. So be it! We all have needs in life and Magic can help fulfill those needs.Spells, white magic, ceremonial magic, incantations, candle magic, black magic, conjuration's, and invocations. It's all here to help you through life . My children i'll not say "that i m the Best, i am the only person who can solve your problem," Becoz i am not the GOD but if i'll work hard and pray for you in a proper systematic way,the GOD definately will give me the result of my hard work...and i'll help you to fullfill your goals,Dreams and everything you want...With the help of 'AGHORI Tantrik SIDHI' BABAji solve your any kind of problems related to :- aghori baba ji black magic ruhani ilem sipli ilem ke mahir -can you solve/// the problem with vashikaran, -totke for kill enemy in hindi, -love chants spells, -totke for early marriage, -prayers and chant love spells, the vashikaran specialit| hasband wife problem solution|vashikaran baba ji | all problem solution here aghori babaji SOLUTION WITH 101 % GUARANTEE EXPERT IN YANTRA-LOVE AND BLACK MAGIC Vashikaran expert HYPNOTISM. baba ji full aghori sadhna will solve any problems. love marrige Problems are solved by some are following : want back your old love any type of hypnotism and black magic get your love back by vashikaran voodoo love spell by aghori baba ji withcraft specialist by aghori baba ji. love hipnotysm black magic specialist love problem……family problem husband/wife problem coUrt case.job===promotion kundli dos mangalik dos dou/in/law/father in/law mother in law LOVE MARRIAGE GET THE SOLUTION all problem solution CONTACT +91-9829394706

    تكييف هاي سينسهاى سينس hisense ( 01096922100 – 0235699066– 01210999852 – 0235710008– )نقدم لكم الشركة العالمية الاولى هاى سينس hisense لتصليح الماركات ( الامريكية _ الالمانية_ والايطالية ) ومتاح لدينا مهندسين فنيين ذو قدرة فائقة على الاصلاح لحل جميع المشاكل والاعطال الاجهزة الكهريائية واصلاح بالمنزل تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense تكييفات هاى سينس hisense وتصليح الاجهزة المستوردة من الخارج وتجديد الجهاز من الاول ونقدم لكم خدمة عملاء يوميا من السبتالى الخميس من الساعة 9 الى الساعة 6 فى انتظاراتصالاتكم على ( 01096922100 – 0235699066 –01210999852 – 0235710008 – ) ويتوافر لدينا كول سنتر للمتابعة كل 3شهور ويوجد لدينا ضمان لمدة عام كامل وقطعغيار اصلية ذو جودة عالية hisensehisense hisense hisense...

  • Black magic SDI to analog converter box code issue

    Hello im using an SDI to analog converter box from black magic and since i was using it to test some other stuff I guess i got the code worng now but don remember what it was. As of right now its only displaying some lines although i can kinda see through and im seeing what the back ground is and it its what im trying to display. 
    This topic first appeared in the Spiceworks Community

    I wanted to let you know that I made a practice dvd today, sampling edited clips from four different sources of imported vhs video--some of it 16mm dubbed to video around 20 years ago--into iMovie. I worked in the update of 6 to see if the application had stabilized at all. I've been working only in 5.0.2 recently.
    I was pleasantly shocked at how much better the video quality was than on the computer--as you foretold. I really couldn't tell a visual difference from the source videos. What a relief! But do you work with that disparity, the difference between computer and TV, without a live TV monitor as you go? It's hard to make decisions on the basis of how it looks on the computer.
    Other encouraging news: the garble around the edges didn't show at all on the TV screen. In the meantime, I'd been trying the plug-in you recommended. I'm glad I won't need to it for all this video after all, but I'm curious to experiment more with it. Any other plug-ins you'd recommend?
    Thanks again for your generous response.
    On a roll,
    BnB

  • What composition settings for  Black Magic 10 bits AVI 1920x1080 (1,0) 25p

    Hi,
    I want to use some  Black Magic 10 bits AVI 1920x1080 (1,0) 25p footage and wonder what settings I have to use in the Composition Settings Dialog Box.
    Thanks! David

    Change the project settings to 16 or 32 bit. Drag some footage into the create new comp icon at the bottom of the Project Panel.
    Your composition will exactly match the clip. If you check composition settings you'll see:
    Or you could just use the HDTV 25 preset. All the standard settings are supported.
    You'll probably want to create a custom output module for your blackmagic codec and set that to be the default. Remember to include audio processing if it's important to your workflow.
    Here's mine:

  • Quicktime not playing black magic codec files, or avi

    Hello!
    I'm on a new macbook pro (17"). my friend on an older mac laptop can play back a quicktime file in the player that has the blackmagic codec, but I cannot.
    I can open the file and play it in final cut pro, I can see it in shake, but I can't play it back in the quicktime player. it shows up all white, but does list the codec as being the black magic 10 bit uncompressed codec.
    I've downloaded the codec from black magic, and dropped it in /library/quicktime, but I'm not getting any result.
    I've also tried "touching" the quicktime folder like they recommend, but nothing's working.
    quicktime's also not playing back avi files, but I know that can be a bigger issue.
    Any ideas?
    thanks!
    -Josh

    The Blackmagic Software Codec.component I just downloaded today show it to be PowerPC. Your Intel Mac needs a Universal version or else you need to run using Rosetta.
    Your .avi issue is probably the same reasons.

Maybe you are looking for