Black out screen when editing

Has anyone had problems where the screen blacks out and directs me to my iPads app menu? This happens whenever I try to edit a document , highlight , or even flip pages. I've tried to restore my purchases, I have all my programs updated... I am confused

Hi, thanks for the reply. Yes I'm using adobe reader. I subscribed to the
covert PDF to word doc and it was working fine then a week or so later it
just blacks out and shuts itself off completely. It happens as soon as I
select a word , then drag the blue dots to choose a sentence to make note
of, it won't even let me finish selecting the sentence before it shuts off.
Hopefully there is a way to get it back to the way it was

Similar Messages

Ipad2 with blacked out screen fix by spanking

Hi All
Just found out from the forum that if your Apple IPad2 goes into a black out screen mode, you may be able to fix it by spanking it.
I had taken it to the Genius Bar and they would have replaced it but was out of warranty.
So taking it out of its case I gave it 5 slaps to the back of the unit with my open hand.
Supprise the when I turned it over and pressed the power button the Apple logo appeared.
Thanks to the support community.
Ozyowee

Welcome to Apple Discussions!
Does your hard drive spin up? And do you have access to another MAC?
If so, you could see if you could mount your Mac's hard drive on the other Mac's desktop using FireWire Target Disk mode:
http://support.apple.com/kb/HT1661
Also mount an external drive equal or larger than your internal drive on the host Mac. Then use a cloning utility like Super Duper on the host Mac to clone your internal drive onto the external drive. This will give you a backup of everything that is on your internal drive--it will be an exact copy. This would take some time, but would likely be the best way to back up everything on your drive.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
It is especially important to back up everything on your drive, because when your Mac goes in for repair, sometimes the drive is erased and the OS reinstalled in the process of troubleshooting. Also, they will likely elect to thoroughly test the machine and do any repairs that are necessary, which could possibly include replacing the hard drive. If you have any sensitive data on the drive, you may even want to erase it before sending it in just on general principles.
Good luck!

How do i get my videos to be full screen when editing and viewing on ipad 2

How do i get my videos to be full screen when editing and viewing on ipad 2. When editing videos in imovie the video isnt zoomed in all the way, this is with imported videos as well as ipad videos... Please help!!

Oh, unless you shot tall.
If you shoot vertical/tall video it cannot be zoomed all the way out in the exit.
Shoot wide, or edit in a different editing app.

Black splash screen when launching Logic Express 7.2.1

hello, i recently installed final cut express hd (universal) and a recent pro app update. ever since then, i get a black splash screen when launching Logic Express 7.2.1. i've tried reinstalling logic, but nothing changes. how do i uninstall the pro app update, will this fix the problem? should i uninstall final cut?
thanks.

Hi M,
did you tryed this?
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html
Best regards,
Jorge

UAC runs in the background, does not black out screen and prompt user

This is my layout:
I have a script in the start-up folder that calls a .exe upon first login after the system comes out of sysprep. In one account (Account A), when that .exe is called, the screen darkness and admin approval is asked for. If I
choose to do my first time login on the other account (Account B) the exe will get called, but I will just get a flashing shield on the task bar which i have to click to get the black out and the prompt for admin approval.
Why is that happening? I want the automatic blackout and prompt on
Account B also. Can anybody suggest some security settings i can check?
UAC is all the way up on both accounts, FYI.
Thanks

Hello, and thank you for replying.
I have restored it, but i backed it up before I did, once i restored it, I restored it from the back up, that i had done previously. I do not have warrenty under this iPhone which is quite fustrating.
Sadly this did not solve my problem; the proximity sensor still does not respond to my face during calls.
I think my only option (last choice) is to restore it completely and start afresh, which is annoying since i'll lose all my game data from Jetpack Joyride .
Thank you for your response though, it was certainly helpful.

Any way to black out screen during remote VNC connection to Mac?

Hi, I regularly connect remotely to Macs in my workplace, via VNC viewer from PC, in order to do support/maintenance work after office hours.
Unfortunately, the security guys in our office building often switch the target Mac/s off while I'm working on them, especially if they can see 'mysterious things' happening on the screen - could be an intruder, or a ghost! =8O
I can't blsme them, nor can I easily ask them not to do it - the place is huge, in a blue chip co, with many different security staff coming and going round the clock. Anyway, if I did ask them, I suspect I'd get an overzealous lecture about machines being left on overnight, blah blah.
So, can anyone tell me if it's somehow possible to black out the target Mac's physical screen while I'm connected remotely to it?
Maybe there's a VNC viewer app that allows this, or some Terminal command I could use?
I usually set up a scheduled power-on for the target Mac, then Shutdown when I'm finished working on it, so it's not as though it's being left unattended at any point, otherwise I could understand the security concerns.
I have to connect from a PC, else I'd be looking at using ARD instead. I can ARD to the Mac client from the Mac server, but that means a remote connection from within a remote connection - not recommended!
It would save me loads of hassle (and danger) if anyone could answer this one please?
Another thing that would help is if I can completely disable the target Mac's mouse & keyboard too?
Thanks for any help,
Paul.

Thanks for your suggestions Bob. I've now sent a feedback request to Apple, for what it might be worth. I'm not sure my user handle will endear me to them!
An excerpt from my message to them...
"Aside from connecting remotely, I've often heard people say they'd like to turn off a Mac's screen and input whilst leaving it running, for example during large overnight disk copies.
I can easily switch off a PC's screen separately (albeit not remotely), but still not able to do that on Macs, after all these years.
I'm sure such a feature would be welcomed by many, especially for privacy/security and energy conservation reasons."
Great if anyone else could also request the same, or, come up with a cunning way to do it?

Frozen & Blacked out screen

I bought my iphone around January last year, i've been having problems with it really since the first three months. I haven't really 'bothered' to do anything about the problems i've encounted because of sheer laziness (bad on my part i know) however it has now become beyond irritating.
the problems are:
1) when calling the phone freezes, the screen blacks out, meaning i am unable to cancel the call.. which results in most of my friends and family having very long answer machine messages, funny at first but bloody annoying. i cannot bring it back to the main screen unless i reset, sometimes it flashes back but the screen doesnt appear to register my touch.
2) i'm not sure if my screen is extra sensitive or (lol) i hold my phone to close against my face, i endlessy put people on hold or call other people in my phone book. i'm not sure if its my cheek or the actual iphone?
I havent ever restored my iphone
i do not have excessive amounts of photos/apps/dodgy apps
and i do not have any songs/videos on it either.
Thank you for reading.

Your iPhone's proximity sensor is not working, either because it has malfunctioned or you are using a case that blocks the sensor. If you have a case, remove it and try your phone.
Here are the sensors or the iPhone 3G/3GS.
Cases designed for the original iPhone will block these sensors.

Black/blank Screen when connected remotely

Zenworks 10.3.3
I've only come across one other post on this forum concerning this issue. Sometimes when we're remotely connecting to an XP workstation all that appears is a black/blank screen. The management and remote machines are MS Win XP Pro SP3, pretty well up to date with security patches and all. On the remote computer, the screen saver at logon is disabled, desktop screen saver is disabled, the NIC is allowed to bring the device out of standby, standby is enabled and hibernation is disabled. If you send it the reboot command, more often then not, you can catch it back at the login screen and go about your business.
Might Zen 11sp1 fix this?

Is anyone at the Device to see what state it is in when this happens?
On 10/28/2011 12:46 PM, elphantasmo wrote:
>
> Zenworks 10.3.3
>
> I've only come across one other post on this forum concerning this
> issue. Sometimes when we're remotely connecting to an XP workstation
> all that appears is a black/blank screen. The management and remote
> machines are MS Win XP Pro SP3, pretty well up to date with security
> patches and all. On the remote computer, the screen saver at logon is
> -disabled-, desktop screen saver is -disabled-, the NIC is -allowed- to
> bring the device out of standby, standby is -enabled- and hibernation is
> -disabled-. If you send it the reboot command, more often then not, you
> can catch it back at the login screen and go about your business.
>
> Might Zen 11sp1 fix this?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Logic 8 Glitch: Blacked out screen to the left of the play line

Using: Logic Pro 8.0.2 / Macbook Pro 2.8GHz i7 / 8GB ram / OSX 10.9.4
When I play anything on Logic, everything that has been played (everything to the left of the vertical play line) is blacked out (see figure 1). When I move the screen back and forth horizontally, it returns to normal. Sometimes the glitches are even more extreme (see figures 2+3). I went to reinstall logic off of the disk, but the DMG no longer works on this version of OSX. Is there some alternate way to reinstall this version of logic, or is there any discount for upgrading to a newer version?
Figure 1:
Figure 2:
Figure 3:

Hi
This is a known issue with LP8 and OSX Mavericks, with no fix other than:
Downgrade your OS
Upgrade Logic: there is no "upgrade path', so either buy Logic Pro X from the AppStore, or possibly locate a "second-hand" LP9 (Logic Studio 2) upgrade (EBay?)
CCT

Doesnt boot Black/Blank screen when a cd-rom is connected - MSI x58 Platinum

i7 920
MSI x58 Platinum *latest bios, updated it after experiencing this issue*
Corsair 3x2gb TR3X6G1600C8
OCZ OCZ700MXSP 700W SLI/CrossFire Active PFC
geforce 280gtx
Windows 7 64bit
This is a build working perfectly for over a year.. well one day my mom turned off the computer when I got home it wouldn't boot I disconnected/reseated everything and was able to figure out if I didn't have my dvd drive hooked up it will boot perfectly fine. I should note that the drive shows up fine in the bios and that with a pata hard drive it will load windows fine.
I've tried 2 pata drives and 1 sata drive all working/tested in other machines .. and it stops at the same exact spot every time right after the bios and before the Windows logo would normally pop up it will just sit on a black/blank screen forever. I have never heard of a issue like this where it wasnt the ide channel going bad or the drive itself but since a harddrive on the ide channel works i assume its good.
I didnt know if i should post this in the windows 7 64bit forum or this but im leaning towards motherboard as the issue because it still freezes at same exact spot even with no hard drives connected , so I couldnt boot anything from the dvd-drive. I'm also thinking its the mobo because i had it repaired a year ago, see my old thread here
https://forum-en.msi.com/index.php?topic=127312.msg958264#msg958264
Any idea's or suggestion please let me know.

A PSU acting up can cause some strange things to happen. Have you confirmed that the DVD drive is working correctly?
Quote
I couldnt boot anything from the dvd-drive.
Is the DVD drive enabled in the boot sequence?

My iBook G4 only goes to a black 'Darwin' screen when it boots up. How do I get it to boot up normally again?

Last night, my iBook G4 started showing odd glitches on the screen. When I restarted it, there was a file with a blinking question mark, so I consulted the manual and it said to shut down, hold 'Option' and turn on the computer, then click the hard disk icon and then the rightward arrow. When I did these things, it led me to a black screen where something called 'Darwin' asked me for my login and password. I managed to restart from the OSX install disc and repair the hard disk volume that way, but the black 'Darwin' screen shows up every time I turn the laptop on! What should I do to get it back to normal? My iBook G4 has OSX 4.11 installed, and I bought it refurbished in June 2005.

Thank you so much for replying; unfortunately, my screen had already gone gray by the time I read your reply and I had to take in to the Genius Bar. My laptop's up and running, but the main problem is still unknown and I'll have to buy a new one soon. Thanks again!

I cannot enlarge photos on Facebook, I only get a BLACK, BLANK screen when I click on them-someone suggested it might be "Screen Resolution Setting"? I've already uploaded new firefox version. Please help!

I am not able to ENLARGE photos on Facebook, this means photos that friends post on News Feed & photos that I post in my FB photo albums. I only get a BLANK, BLACK screen when I click on individual photos. A friend suggested that I upload the New Firefox, and I did this today, but it did not resolve problem. Friend also suggested that it could be "Screen Resolution Setting"?? OR "Data Rate" too slow?? I do not know how to check these features? Please help! If it could be something else, please let me know. Thank you for your time & help!

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
See also:
* http://kb.mozillazine.org/Images_or_animations_do_not_load

Why does my iPhone 5c go to black apple screen when I unlock it?

When using my messaging, if my phone locks when I unlock it, it goes directly to the black apple screen that usually appears when turning my phone on. Then it will eventually go back to my messages. Does anyone know why it's doing this and how to fix it?

Hi MrsBarnett10,
If you are having an issue with your iPhone not unlocking normally while using Messages, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L

LR4.4 - blacked out boxes when importing images from upgraded PSE10 catalogue [was: Lightroom 4]

I have been using photoshop elements 10 for over a year and decided it was time to upgrade to Lightroom for my photo workflow as I am doing more paid photography work. I purchased and received my boxed full version of Lightroom 4 from B & H photovideo on Friday. I installed it then went on-line and updated it with the download of lightroom 4.4. Then I opened lightroom 4.4 for the first time and went to files and selected upgrade my photoshope elemnts catalog to lightroom. Once that was completed I then tried to import images to lightroom 4 to work with them and all I get are blacked out or greyed out boxes in my slide strip at the bottom of the desktop window in import mode. When I point to each box it shows a file name but will not show the image. I have spent all kinds of time reading and watching tutorials on opening images, importing images and catalogs and I am FRUSTRATED.... Would really like to talk to someone to get this figured out. I never thought it would be this difficult to use this program... HELP Please...

I would like to THANK YOU for your assistance in my situation. I followed your suggestion and went into my monitor settings and did a manual reset to the default profile and went back to Lr and the images started popping up one at a time until all 7000+ were visable. Just for the record, I am using Canon 1Ds Mark II, on a Quadcor AMD unlocked FX processor running Windows 7. I shoot in RAW and convert to JPG. It would have been the last thing for me to look at on my monitor settings as all the other programs on my computer run without a glitch. Thanks again for your help... Cheers!

HT201177 My Macbook pro: After sleeping, the screen comes on momentarily then blacks out. When I close the lid and reopen it the same thing happens. The screen only does this after waking up from sleeping. Help, thanks!

Macbook Pro:
When I raise the lid after sleeping, the screen comes on momentarily then backs out. If I close the lid and raise it again, the same thing happens. It is sometimes necessary to force quit. Once restarted, there is no problem unless the lid is closed for a short time and the machinge goes to sleep.
Help! Hesperia fire captain

Hi ...
Try Resetting the System Management Controller (SMC)

Black out screen when editing

Similar Messages

Maybe you are looking for