Black pause between timeline and end action
I am using Encore DVD 2.0 and After effects 5.5
I made my menu in Photoshop and animated it in After Effects. I brought them both into Encore DVD, set the animation as first play and the end action as the static menu. When I preview it, there is a few seconds of black between the 2. I want the transition to look seamless. Is there a setting to get rid of the black? or is there any other way to do this without having to go out and buy a better version of after effects?
I want to solve the same issue!! Did you solved yet???
Where are you observing the black "pause," in Encore's Preview, or on a burned test DVD RW on a set-top player?
That can make all of the difference.
Good luck,
Hunt
Similar Messages
-
Hi!
I have made an intro to my menu (animating the menu in).
But there is a little thing that is enoying. The pause between the intro and the menu that happends when the dvd are played on a dvd player.
I have heard about something that is called VTS (Video Title Set)
My question is: Is this possible to configurate is Encore dvd 2??
(excuse my bad english. I did not have a dictionary right now ;-) )
About VTS (from the Apple dvd studio por manual):
VTS Editor
The VTS Editor allows you to verify and control the VTS (Video Title Set) structure of your project. Using the VTS Editor, you are able to manually assign elements to VTS blocks. This makes it possible for you to optimize the final DVDs layout so that when its played there are minimum pauses due to the player having to move between elements in different parts of the disc.
When you play a DVD and a jump must occur, such as when a menu button is selected that jumps to a tracks chapter marker, there is a slight pause while the DVD players laser locates where to jump to on the disc.
- If the track is in a different VTS block than the menu, the laser must first jump to the video manager files, and from there on to the tracks VTS.
- If the track is in the same VTS block as the menu, the laser is able to go directly to the track.
You can improve a discs playback performance by keeping related elements together whenever possible. For example, you should place the scripts used with a specific track in the same VTS as the track.
Since menus often link to multiple tracks or slideshows, you will not be able to keep them together with everything they can jump to. However, you can minimize the time a DVD player spends jumping from the menu to the video manager files by keeping the menus in the first VTS, which is physically located close to the video manager files.
AndersAnders.
You cannot configure projects in quite this manner with EncoreDVD - and in all honesty, this is pure sophistry on Apple's part.
The way Encore works is to turn the timelines into VTS
i in the order in which you create the timelines in your project.
This cannot be altered later, but would make a fine feature request
http://www.adobe.com/support/feature.html
There will
i always
be a slight lag between a movie and a menu, no matter what application you author in - even Scenarist has this, as the player is jumping from a Movie into Menu Space. In Encore, you can minimize this lag by creating the intro sequence as a motion menu, and then using a transition to the main menu - this would keep both your intro and the main menu in Menu Space, and very close together indeed.
It's probably the best solution for you - much better than DVDSP, that's for sure! -
Encore CS3 First Play and End Action problems
I have one menu, one timeline. I'm trying to have the DVD start with the menu for about 2 minutes, the length of the audio asset linked to, then start the first chapter of the timeline. No overrides used in the project.
First Play of the disc: set to the default menu.
End action of the menu: set to first chapter of timeline.
Menu-motion: Audio linked to an audio asset, duration about 2 minutes.
In Encore DVD 2.0 this was trivial and worked. Not in CS3!
Most of the time it loops the menu indefinitely. Sometimes it will loop twice, then start the chapter.
Preview from the menu works. Preview from the disc doesn't, nor the final DVD burn. I've seen this was discussed here before, I just can't find the topic.
Any fixes?
ThanksJohnathan,
Tell us more about your Assets on this Play First Timeline. What are the files, format, Duration, etc.? Is this file muxed, or elemental streams? The greater the detail, the better.
I have not seen the behavior that you observe, hence my questions.
Hunt -
Differences between Monitor and Decrypt actions in Decryption Policies
Hi Everybody,
Currently I'm working in my first WSA (S170) implementation and some questions has popped up while I was configuring the Decryption policies. The main question here is:
What are the differences between "monitor" and "decrypt" in the URL Filtering options. As I understand the "decrypt" action allows the WSA to decrypt the packet and treats it like a plain HTTP packet applying the Access Policies, malware inspection and so on. Then I do not really know what the Monitor option does, I'm assuming that it does not decrypt the packet and only checks the destination URL and to allow or not the connection.
Thanks in advance for your collaboration.
Jose M. Cortes H.If you set it for Decrypt, it always decrypts stuff in that category.
If you set it to monitor, then other criteria in the policy are used for whether to decrypt or not, such as Web Reputation...
Here's the flow, which I pulled from the online help:
https://wsaip:port/help/wsa_help/index.html?Decryption_policies11.html#wp1208329 -
Generate all Months between start and end dates using Parameter
Hi,
I have a query in which i have two dates that is Start Date and End Date and now i have to populates all the Months between the date range:
Start Date : APR-12
End Date: JUL-12
Now taking these two values i want the recors as displayed below
APR-12
MAY-12
JUN-12
JUL-12
So how can write my SQL query to finish this task
ThanksSounds easy with single pair of Months:
with data(st_dt, end_dt) as
select to_date('JAN-2012', 'MON-YYYY'), to_date('SEP-2012', 'MON-YYYY') from dual
select add_months(st_dt, level - 1 ) mons
from data
connect by level <= months_between(end_dt,st_dt) + 1;
MONS
01-JAN-12
01-FEB-12
01-MAR-12
01-APR-12
01-MAY-12
01-JUN-12
01-JUL-12
01-AUG-12
01-SEP-12
9 rows selected Please ensure to read {message:id=9360002} and post the question correctly with all the mentioned points in the thread. It facilitates the people to understand the problem clearly and provide a solution that is compatible with your Oracle Version. -
Generate all the quarters between start and end dates
Hello all,
I have a query in which i have two dates that is Start Date and End Date and now i have to populates all the quarters date between the date range:
For eg:
Start Date : 1-Apr-2011
End Date: 1-Jul-2012
Now taking these two values i want the recors as displayed below
Apr 2011
Jul 2011
Oct 2011
Jan 2012
Apr 2012
Jul 2012
So how can write my PL/SQL query to accomplish this task
Thanks in advance958964 wrote:
Hello all,
I have a query in which i have two dates that is Start Date and End Date and now i have to populates all the quarters date between the date range:
For eg:
Start Date : 1-Apr-2011
End Date: 1-Jul-2012
Now taking these two values i want the recors as displayed below
Apr 2011
Jul 2011
Oct 2011
Jan 2012
Apr 2012
Jul 2012
So how can write my PL/SQL query to accomplish this task
Thanks in advanceHow do I ask a question on the forums?
SQL and PL/SQL FAQ
solution can be done in SQL only; no PL/SQL. -
Different video between timeline and primari storyline
I'm a beginner with FCP, I'm at the end of my project, just need to share but the video of a clip I modified in the timeline looks different in the primari storyline (audio is ok) and the problem is there also in the exported video.
is there any "refresh clip" or "empty cache" instruction?
I mean, it looks like an old version of the video in the primary storyline (and this is the problem) but it looks correct in the timeline (audio is good in both cases)
Thanks for your helpThanks Russ for your reply
In the viewer it looks correct when i watch it from the timeline but it plays the wrong clip when I watch it from the primary storyline or exported video.
I'm working this way: I'm making a serie of similar videos, so I have a first clip with an intro, a main clip with video and audio effects set always the same way and a last clip with the outro (so in every video there's the same intro, audio an video style and same outro). Every time I work on a new video, i click "open in timeline" on the main clip, I work in here on the contents and then I export the primary storyline. This time I built the main clip, then at the very end I added a last part, but when I watch it from the primary storyline there's the video of a different part played over the correct audio (so that video part is played twice: once over there and once at the right moment).
It seems like in the prymary storyline it plays part of a previous version of the video (Like if it was before I added the last video) and part of the current correct one...I don't understand why it all looks fine in the timeline and in the primary storyline the audio is fine as well But not video...
anyway, I'll try exporting with the range tool and let you know...thank you -
Drawing small, short curves in Photoshop draws straight line between start and end points
I recently installed Windows 8 Professional, Photoshop and the latest Wacom Bamboo tablet drivers and have been experiencing this issue. I've turned off windows flicks and ink. This only happens in Photoshop with the brush tool and I can't seem to find a setting that this corresponds to.
Basically, when I draw small, short curves (particularly letters like 'c' and 'h'), when I lift up my pen, Photoshop automatically connects the end and start points together with a straight line ('c' almost becomes 'o' or 'a'). I'm not holding the shift or any modifier keys. I've tried googling this issue, but I have no idea how to phrase it properly to get any results.
Here's an image of what I'm talking about (the top was drawn with the pencil tool, the bottom with the brush tool which demonstrates the issue. I've highlighted the start and end points with red dots):
ANy ideas? :/Is caps lock on?
-
Find Conflicts between start and end time
I have a table appointment (appointment_id, start, end , Location) will hundreds of records like below
appointment_id start
end Location
1 2015-04-29 10:00:00.000 2015-04-29 12:00:00.000
ABC
2 2015-03-29 09:00:00.000 2015-03-29 13:00:00.000
XYZ
3 2015-03-29 10:00:00.000 2015-03-29 11:00:00.000
XYZ
if you see appointment id 2 and 3 they are conflicting with same location
appointment id2 starts at 9 am and ends at 1pm ,
but appointment id3 also reserved same day & same location start at 10am and ends at 11 am ..
this should not be possible ....
can you help in finding how many such conflicts are there in the appointment table ?
i will have to find a report...
ThanksHi coolguy123SQL,
Regarding your description, does the appointments happened in the same prefixed locations with a time span overlap mean a conflict? If my understanding is correct, you may reference the below code.
DECLARE @myTable TABLE (appointment_id INT, startDateTime DATETIME, endDateTime DATETIME, location VARCHAR(10))
INSERT INTO @myTable
SELECT 1, '2015-04-29 10:00:00.000', '2015-04-29 12:00:00.000', 'ABC' UNION ALL
SELECT 2, '2015-03-29 09:00:00.000', '2015-03-29 09:30:00.000', 'XYZ-123' UNION ALL
SELECT 3, '2015-03-29 10:00:00.000', '2015-03-29 11:00:00.000', 'XYZ-456' UNION ALL
SELECT 4, '2015-03-29 11:00:00.000', '2015-03-29 13:00:00.000', 'XYZ-789'
;WITH CTE AS
SELECT appointment_id,startDateTime,endDateTime,location,
CASE WHEN CHARINDEX('-',location)=0 THEN location ELSE SUBSTRING(location,1,CHARINDEX('-',location)-1) END AS locationID FROM @myTable
CTE2 AS
SELECT *, ROW_NUMBER() OVER(PARTITION BY locationID ORDER BY startDateTime) AS seq FROM CTE
SELECT
c.appointment_id conflict_appmt_id1,c.startDateTime startDateTime1,c.endDateTime endDateTime1,c.location location1,
t.appointment_id conflict_appmt_id2,t.startDateTime startDateTime2,t.endDateTime endDateTime2,t.location location2
FROM CTE2 c JOIN CTE2 t ON c.locationID=t.locationID and c.endDateTime>=t.startDateTime AND c.seq<t.seq
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support -
Imported XDCAM footage "blacks out" on timeline and when exported, which will not do.
We're having a "horrendous problem" importing XDCAM. About half the clips "black out" while playing on the sequence timeline, although the associated sound files play fine. BTW the clips that black out always do so in the same place in the clip.
A first I thought the camera operator might have been covering the lens, but we can convert the MXF video to mp4 using Pavtube and video plays the entire length of the clip.
This problem happens in CS5, CS5.5, and CS6. It happens when we Import through using the Media Tool or the other way (whatever that's called).
When we EXPORT from the sequence the blackout occurs most of the time, although every once in a while the exported clip wll play in its entirety.
We have several hundred clips we need to use and the workaround is very cumbersome and time consuming, so we'd really like to solve the import problem so imported XDCAM clips work properly on the timeline.
To view the problem click below.
This encode plays the entire clip.
http://youtu.be/5ylb3ak1W5I
This encode made immediately after the one above blacks out
http://youtu.be/nlr7sV6kyQs
Does anyone have any idea what is going on and how to fix it?Well...
The problem has been solved in a way that indicates that the problem should never have occurred.
We finally were able to borrow a XDCAM disc reader and the people we borrowed it from also incidentally provided a bit of software called "XDCAM Transfer". THAT software solved the problem.
I have spent many many hours reading on the Sony website, the Adobe website, and any other website I could find (next to my desk I have a 6" stack of printouts that I've read) and nowhere did I see this piece of software mentioned.
Once that software was installed it imported everything, even the files we already had on the local HDD.
Thanks everyone for all the attempts.
JP -
am i in the wrong view
cogi
Thanks for the reply. Let us see if the following screenshots will give you a better idea of what to expect in the Premiere Elements 13 workspaces.
Remember, the workspaces for versions 11, 12, and 13 are very similar but drastically different in what you saw in Premiere Elements 10 and earlier.
In Premiere Elements 13, you click on the Expert header in the row of headers that reads left to right eLive, Quick, Guided, and Expert.
The Expert workspace when selected presents as seen in the first screenshot
PREMIERE ELEMENTS 13 EXPERT WORKSPACE
The Premiere Elements 13 Expert workspace would be the counterpart of the Premiere Elements 10 Timeline workspace
when you clicked on Timeline at the top left of the Timeline workspace.In 10, there are no headers at the top of the
workspace to click on. This second screenshot shows the Premiere Elements 10 Timeline workspace when you click on
Timeline instead of Sceneline tab right next to it.
PREMIERE ELEMENTS 10 TIMELINE WORKSPACE
If you want to go from the Premiere Elements 13 Expert workspace to its Quick workspace, you click on Quick in the
list of headers that read eLive, Quick, Guided, and Expert. Premiere Elements 10 Sceneline workspace would be the counterpart
of the Premiere Elements 13 Quick workspace. The Premiere Elements 13 Quick workspace would present as shown in
the third screen shot when you click on Quick at the top of the Premiere Elements 13 workspace.
PREMIERE ELEMENTS 13 QUICK WORKSPACE
The Premiere Elements 13 Quick workspace would be the counterpart of the Premiere Elements 10 Sceneline workspace.
The Premiere Elements 10 Sceneline workspace is shown in the fourth screenshot after clicking on the Sceneline choice
at the top left of the Timeline.
PREMIERE ELEMENTS 10 SCENELINE WORKSPACE
Please focus on video tutorials for 11, 12, or 13 (preferably 13) until you are OK with the program features for 13.
Please review and consider and then let us know if you are now OK with the information. If no OK, then please
tell me what I need to clarify.
Thanks.
ATR -
Computer as 'black box' between contoller and device
Hallo,
I am trying to develop some sort of 'computer black box' (a computer
with a GPIB - board and some software) to catch all GPIB commands
from a controller to a device and back.
The commands from the controller must be interpreted by the 'black box'
and then send to the device - and the other way around.
Has anybody some ideas how to do this? I would be VERY happy to
get some sample code in c/c++.
Thanks in advance,
Carsten.
P.S.: My problem is that it seems that I have 2 contoller on the bus at some
time which causes problems.Yes, this can, and HAS been done! Admittedly, this is an ADVANCED GPIB
application!
WHY would you want to do this? You may need to have the "black box computer"
translate GPIB commands originally intended for one instrument, so you can use a
newer replacement instrument. It may be the case that the original source code
and/or developement software tools are no longer available. (Think old,
military projects.)
On the other hand, if you just need to log GPIB traffic, and pass it on, then
NI's GPIB+ Analyzer card is all you need.
But if you really need to modify the GPIB commands on the fly, then you need TWO
GPIB cards in the black box computer.
The first card is setup/programmed to NOT be a system controller, and board
level IBRD and IBWRT calls are made to receive and send GPIB messages with the
(main) GPIB controller. Just put the IBRD and IBWRT in a loop, and use a short
timeout, say .1 second. Most of the time, these will timeout. But when the
(main) controller sends a message, the IBRD won't timeout, and your program then
knows it has recieved a new GPIB message from the main controller. Likewise,
when you need to send a response back to the main controller, just keep calling
IBWRT until it doesn't time out, then you know the main controller received it.
The second GPIB would be setup/programmed in the normal way, as GPIB system
controller.
The application software running on the black box computer would recieve a GPIB
message on the first (talker/listener) GPIB, process it in some way, then send
it to the instrument on the second (controller) GPIB.
I myself wrote a program for Tektronix TLA700 logic analyzers that makes the NI
PCMCIA-GPIB controller card behave exactly like a GPIB Talker/Listner. The
program parses the received GPIB commands and executes them by making calls to
the TLA700 software. This program was written in VB6 and is available from
Tektronix.
(note: I no longer work for Tek...)
Good luck!
Best Regards,
Mike T
Mike Tranchemontagne
Consulting Applications Engineer
TeraComm, Inc.
148 Main Street
Building A, 3rd Floor
North Andover, MA 01845
877-900-TERA (8372)
978-557-9490 (FAX)
603-598-4773 (Direct Line and Cell)
Carsten Gruening wrote:
> Hallo,
>
> I am trying to develop some sort of 'computer black box' (a computer
> with a GPIB - board and some software) to catch all GPIB commands
> from a controller to a device and back.
> The commands from the controller must be interpreted by the 'black box'
> and then send to the device - and the other way around.
>
> Has anybody some ideas how to do this? I would be VERY happy to
> get some sample code in c/c++.
>
> Thanks in advance,
> Carsten.
>
> P.S.: My problem is that it seems that I have 2 contoller on the bus at some
>
> time which causes problems.
Attachments:
miket.vcf 1 KB -
How to create a join like: year between start and end
Hello all I have got a dimension and a fact.
normally in sql I would use the following:
fact.year between dimenstion.start_year and dimension.end_year
When I use this, then OBIEE says I have to use operators
So now I am trying:
fact.year > dimension.start_year and fact.year < dimension.end_year
But now OBIEE is saying that I must use the equel operator...
My question is how can I make this type of join?Thanks for your quick answer... I am trying this now...
-
Black picture between button and the movie
Hey
I would to have an answer from none who works with Encore proffesionel.
I have maked a menu and linked a button to a chapter in my movie
when I press the button there comes about 2 sec of black screen before it goes to
the movie.
Can´t I get that to go away ?
Regards
AlmfeldtWelcome to the forum.
Are you seeing this black while in Preview Mode in Encore? That is common. Test by burning a DVD RW and playing on a set-top player. You should NOT see the black there. This is a failing of the emulation nature of Preview, and appears with Button Transitions and many other forms of linking.
Good luck,
Hunt
PS the reason for testing with DVD RW disc is to keep from creating "coasters." -
Image quality difference between timeline- and clip monitors
I've just captured dv into fcp4.5 and got surprised that I got the unrendered red line indication in the timeline when dragging it down from the clip monitor.
However, I rendered it but in timeline viewer the quality was bad like it was a field error. Contures were uneven etc.
The video in clip monitor has perfect quality.
I wish to find out a solution with this to learn something from it, rather than just re-install FCP wich normally puts things right.
Big thanks for advice /Erik
G4 1.2 Mac OS X (10.4.3) 1.8GB RAMThanx Jim, the compression was for some reason changed to none, now I changed it back to DV-PAL.
I suppose this compression doesn't affect the final export?
If I'd export with the DV-PAL compression (Ialways export with none) would that degenerate the video again or just read in the same trax so to speak?
Regards, Erik
Maybe you are looking for
-
Hi all, I need a report to know how much Qty of material ive sold to my customers (month wise). With the following fields. Cust Name, April Qty, may Qty, June Qty, July Qty, Aug Qty.............and So on. till jan31st 2009. Ive Tried extra
-
I want to use my iphone as a storage device - any tips?
Hello I have files which i need to take to work tomorrow on my computer at home. I don't have a USB flash drive and wish to use my iPhone 3GS to achieve this simple task. What I have in mind is allocating, say, 4GB of space to store files on and be
-
HI There, Can someone please give me details of the standard datasources and BW objects for the below requirement in Purchase Module? - Open PO report - PO Activity Report - Staging PO data for easy conversion into new system Can some one explain me
-
Unable to login to Oracle E-Business Suite R12 on Windows 2003
Hi, I have recently installed EBS R12 on WIN 2003 that finished successfully. I can launch the login page - http://prora.com.au:8000/OA_HTML/AppsLogin I entered user/passwd as SYSADMIN/sysadmin but it didn't allow me to get inside. It doesn't display
-
Have your iWeb site critiqued.
If anyone would like to have their iWeb site critiqued post it here. All graphic designers and professionals alike are encouraged to critique as well. I have been working as a graphic designer for over 8 years, and am working towards my masters degre