Black prints but colors do not print.

I have uninstalled my printer (officejet 6500) and then downloaded new drivers and reinstalled the printer. The price of the printhead makes me wonder if I should buy a new printer.

The document here may help resolve colors not printing on the Officejet 6500. Be sure to check the vents as described in Solution Two. If that does not resolve the issue the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Qosmio: X505-Q890 Black Screen BUT Computer has not crashed

I have a Qosmio: X505-Q890, my screen goes black after a few minutes. But if you look at it on an angle you can see screen and mouse moving around. I am assuming that the backlights are going out on screen. What is the fix. I am capabale of dissasembling laptop and repairing. What parts do I need to fix?
Thanks
Greg

It could be either the inverter or the backlight, but it's hard to know for sure. It could also be a loose cable, but that seems less likely to me (although it might be easier to check).
- Peter

HP C6150 All-In-One Will Not Print Black Text But Does Partial Test Print

Hi. Thanks in advance for any help anyone can proffer.
I've read through the forum and I think there are some similar issues, but none exactly the same as ours.
This HP C6150 does print pictures, but suddenly stopped printing black text.
HOWEVER, the test prints will print in black with the Windows Logo, but will not print any associated text.
Odd. It just suddenly stopped printing.
Variables:
C6150 All in One - No other problems for two years.
Using refilled ink cartridges from outside source. (not my decision)
Ink is full. No other changes made in last three days.
Troubleshooting Steps:
Uninstalled and then re-installed software in entirety.
Put in 'new' (refilled) cartridge for black and magenta.
Tried (not sure if successful) soft reset.
Tried cleaning the print cartridge with 'Q-Tip' and distilled water.
Have not yet spent money on new OEM print cartridges. That is next step unless other suggestions merit.
Possibilities:
It may be the refilled cartridges, but they've worked so well in the past.
The cartridge prior to the recent replacement was working fine and was not yet out of ink.
The print head might be damaged. But this should/would affect all black printing and this is not the case.
Were the driver corrupt, the reinstall should have fixed it ... you'd think.
So, we're looking for some suggestions prior to going out and getting a new printer.
Thanks again, in advance, for constructive non-judgmental suggestions.
MackNC

The likely cause is the black ink is not printing at all. When printing graphics (like the Windows Test Page) black is made from mixing the color ink. I would suggest printing an internal diagnostic test page as shown in this page. Does the black block print? If not then clean the printheads as described here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP c7180 Printer - Black prints blurry but color is okay

Aloha,
I have an HP c7180 printer and have recently had a problem where the black cartridge prints blurry and with lines through the print, but the color prints fine. I tried cleaning the printhead and aligning the printer, but these did not work. I also bought a brand new HP 02 black printer cartridge put the problem still exists. Anyone have any ideas on how to go about fixing? It's my last ditch effort before tossing the thing :-)
Thanks for your help!

I am interested if you find out what is causing this, as I have the same situation. One or two lines are fuzzy in the black, and it appears the top half is offset from the bottom half on only two lines of text in the entire page.

Black ink color will not print. Printer indicator on the printer and at the computer shows that the

The Black ink color will not print on my HP Officejet 7500 E910 printer. Printer indicator on the printer and at the computer shows that all the colors are about 50% full. Any ideals? I have the run the printer thru the diagnostic page and have cleaned the cartridges.
Thanks

Just wanted to let everyone in on a little trick I learned about 10 years ago with inkjet printers. This might not work for everyone but it worked wonderfully on this printer and all the previous ones that I have owned.
The printer head will get clogged. On this printer it seems to get clogged often. You will need to wash it under Warm water. It might take as long as 4-5 minutes to run the water thru the small circular apertures and also the bottom of the printhead-- where the ink actually exits the printhead.
What you need to do:
1. Remove all of your ink cartridges
2. Release the grey latch, or lift it up
3. Remove the printhead
4. place the printhead under a warm water stream cleaning both the inside and outside of where the ink enters and exits the printhead
5. keep running under warm water untill you dont see anymore ink coming out of the printhead
6. Dry with kleenex dabbing lightly untill you soak up all the water off the printhead
7. replace in printer
8. Run clean up twice and then try and print a diagnostics page or print alignment.
I hope this works!
Cheers

HP C6180 does not print in black when a color cartridge is out of ink - a design flaw?

I mostly print in black and bought the color printer as convenience. Recently I get a message that ink in Cyan cartridge is low, even I have done practically no printing in color for a long time. It seems that I am consuming color ink during power up cleaning process. When it gets low enough, after few print jobs, it stops printing in black also! I do not understand why printing in black is disabled when ink in a color cartridge is low must be allowed to print in black till all black ink is consumed. This seems like forcing customers to buy color cartridges even is they want to print in black. A highway robbery!.

Hi there.
Two things that might help you: first off, if you print in fast draft mode, you'll print in black only. Otherwise, it will underprint some color. It actually makes the black look better and sharper. BUt, if you're simply printing webpages, just print fast draft, double-sided, and save some ink and paper. I print two pages per side, at least until my eyes get a little older. Anyway, that's where your ink has been going.
As for not allowing you to print, it's actually to protect the printhead. As a side note, your printer actually has a very impressive air management system. It actually reduces the amount of waste ink by flowing ink across the inside of the nozzles to keep them healthy, rather than spitting ink to keep them healthy. I was kind of sad we didn't advertise the efficiency side of things for that printer.
Hope that clears things up a bit.
I work for HP and hope to make your day Sproutastic!

Want photo to print on spot color plate, not black

Have black & violet 2-color job. Want one photo to print on violet plate, but I can't get it to change... Thanks L W

Drag the swatch from the swatches panel and drop it on the photo. This
will only work with a grayscale image with no transparency.
FWIW, you'll get a better look if you open it in Photoshop and create a
duotone there or use a mixed ink in InDesign.
Bob

Low ink warning for color cartridges, but I have not done any color printing in HP6700

I have an Officejet 6700 All-in-One. I moved about a year ago. When I installed the printer I got a warning that the color cartridges where low. I replaced the color cartridges. I have gotten the same warning of Low ink in color cartridges, but I have not done any color printing. During the year I have printed no more than 10 test pages that have color, but no other color printing. I leave the printer on all the time. Could this be why the color ink warning appears?

Hi,
Each time you turn on the printer, it uses color inks even you don't use color inks to print. It needs and uses color inks during warming up process.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Mp600 prints double image. Color type not in register.

Recently update iMac to OS X Yosemite. Tried to update mp600 software. Only software I could find was for mp610. Now when I print color, it prints a double image out of register. Black type seems to work fine, but colors won't line up. Is there anything I can do or any software I can use to correct this issue?

flynlyons2 wrote:
On my website my background jpg image that appears in bottom left corner is not correct in Safari. ... My website looks silly in Safari with this error. www.eXacteXposure.com is the website.
I'm not seeing that problem here, either (Safari 3.1.2 in Mac OS X 10.5.5). The image at the bottom left corner matches the background nicely.
Have you looked at your site on more than one Mac running Safari? My thinking at this point is that your web site and images are fine, but there's a problem with your installation of Safari. Do you have any third party Safari "enhancers" or hacks installed?

Color is not printing

Color does not print when the color option is selected. I've replace the cartridges with new HP cartridges. run the align and clean printheads a couple of times but nothing seems to work. The best I get is black where appropriate and orange/rust where there show be tru colors.

Hello, The only solution to this issue is to ensure there is atleast 50% of ink in the cartridges and perform Clean Printhead for atleast 3 times. Wait for 15 minutes and then try printing. If issue still exists, it could be an issue with printhead which is a fixed part and cannot be replaced. Hence its time to replace a printer. Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.

D7360 won't print in "Black Only", unless color cartridges are also non-empty

I'm trying to print a document in grayscale mode using D7360 Photosmart printer.
In the printing setup dialog am explicitly checking the option to use "Black Print Cartridge Only".
The printer refuses to print, saying:
"The following ink cartridges are empty: Light Cyan. Replace these ink cartridges to resume printing."
"The printer does not have enough ink to ensure printer's health. The empty ink cartridges must be replaced to resume."
Does this mean that even though it is not using the color cartridges, all of them have to be non-empty when the printer is operating?
This question was solved.
View Solution.

I think I solved the problem for my PC. I put in a new black cartridge but my color cartridge is empty. My printouts started looking awful and were trying to print in blue. I went to the printer area of the control panel and requested grey scale only. Suddenly my printouts look great, as they did before. I'm running Vista on a Compaq with an HP deskjet D1560 printer.

Upgraded to CS5 Illustrator form CS3 Illustrator. Colors are not printing correctly in CS5

I have just recently purchased CS5 Premium Suite. I am working with Illustrator. When I print my CS3 Illustrator files in CS5 the colors are not printing correctly. Is there a way to fix this problem

I've been doing more troubleshooting since I wrote this post. I've now tried printing from a non-Adobe app and I'm getting the same margin error. So it is definitely a Xerox issue and I have a tech coming out on Monday.
The reason I originally figured it must be an CS5 issue is because just two weeks ago when I was using CS2, our landscape-oriented programs were printing with .25" margins as they should. Then last week after upgrading to CS5, the inside page (2nd page) was noticeably out of whack and shifted to the right (not left). But when I started trying to troubleshoot this week, everything started shifting to the left.
The only thing different between those two weeks was the fact I updated to CS5.
But obviously, my printer as decided to go to crap in more ways than one all in a two week period. Hopefully the tech can sort it out next Monday.
Thanks!
Christi

Printing Black&White and Color combined in Binder

Problems with Acrobat 8 Professional for Windows. Use Windows 2003, Canon iRC 3220N printer.
I have produced a brochure of 44 A4 pages. 8 pages in color, rest in black&white. The pages are individually produced in Illustrator (Creative Suite 3). Some illustrations in PNG-format where imported into Illustrator. Each of the pages were converted to Acrobat PDF's. For all Acrobat pages with an former PNG-illustration i did the Advanced-PrintProduction-ConvertColors and converted to Grayscale. When printing these pages individually they come out correct as black&white or color when that is the setting.
But when all the 44 PDF's are combined into a binder some of the black&white pages are forced back to color. Most of these forced-back pages contain an former PNG-illustration The brochure ia printed on A3 sheets as a booklet and saddle stitched.
Any help to solve the problem?

Take a look at these forum discussions:
http://forums.adobe.com/message/2685675
http://forums.adobe.com/message/2612127

Acrobat Pro 9 - Chose Greyscale in print properties, but it is not changing it to greyscale

Acrobat Pro 9 - Chose Greyscale in print properties, but it is not changing it to greyscale. I tried to go through all the settings, but I cannot figure it out. I am printing a color PDF document to a greyscale document.
Not sure if I am in the correct community group.

thank you for this post. It still works and is a required "fix" as of Oct 2010.
Somehow, in my network adapters, a wireless adapter called Microsoft Virtual WiFi Miniport Adapter was there (this may have something to do with the virtualization abilities of Windows 7). Anyway, I disabled that by going to
Network and Sharing Centre -
Change Adapter Settings, and then
right clicking on it and
choosing disabled.
Next thing I knew Adobe Updater was checking away merrily.

LaserJet CP1525nw color - does not print on HP glossy laser brochure paper

Hi,
For some strange reason my LaserJet CP1525nw color does not print on HP glossy laser brochure paper. It smears the color powder and makes lines on the paper. Does anybody know the reason for this?

Hello,
Thanks for the post. I've included a couple of links below that should assist with this one. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02182770&cc=us&dlc=en&lc=en&product=4052980&tmp...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02510644&cc=us&dlc=en&lc=en&product=4052980&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Black prints but colors do not print.

Similar Messages

Maybe you are looking for