Black Pwr off/on Cancel/ Accept screen?

Turned my phone off and then back on this morning. After about 30 seconds on the home screen I got an all black screen with "Pwr off/on" at the top and cancel accept buttons on the bottom. I ignored and it went back to the home screen. Anyone seen this? What is it?

That message does come up sometimes - usually when you first activate the phone. I think it has something to do with registering itself to the network. That will also happen if AT&T makes a change to a tower and you're on it, the same message will pop up.
Funny enough, if you hit the Accept button, nothing happens. I expected the phone to restart on its own, but it didn't. I ended up just manually powering it off and back on again.

Similar Messages

Message on iPhone 3GS screen Pwr off/on; Cancel / Accept

I manage my business's AT&T account and iPhones. One of my users had his phone go off the 3G network sometime over the weekend. I called AT&T and had them re-send the signal to the phone. I shut the phone off, turned it back on and it seemed to be working fine - accepting email over 3G network, etc.
About two minutes after it started working fine, the phone popped up a message with a black screen that said, simply, "Pwr off/on" At the bottom of the screen were the [red] and [green] Cancel or Accept options. I chose Accept and the phone remained powered on and working fine. I have never seen this message before (and have been working with iPhones since they first came out) and was curious if anyone else has seen the message and knows what it means and/or why I got it. Thanks!

That message does come up sometimes - usually when you first activate the phone. I think it has something to do with registering itself to the network. That will also happen if AT&T makes a change to a tower and you're on it, the same message will pop up.
Funny enough, if you hit the Accept button, nothing happens. I expected the phone to restart on its own, but it didn't. I ended up just manually powering it off and back on again.

My Ipod touch is stuck in the password screen and I can't turn it off or cancel. The screen that it is stuck at says :enter the password for the exchange account "exchange"

My Ipod touch is stuck in the password screen and I can't turn it off or cancel. The screen that it is stuck at says :enter the password for the exchange account "exchange"

Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears

TA44551 Just recently my ipod nano's battery seemed to stop working? I plug it into a charger, the ipod says it's charged, but when I take it off the charger, the screen goes black. What's going on? How can I fix it?

Just recently my ipod nano 4th generation's battery seems to be messed up? I plug it into the charger and the ipod says it's charged, but when I take it off the charger, the screen goes black. What is going on and how can I fix it? I'm really sad because it happened so suddenly.

Yes. The battery appears to be shot and in need of a replacement. This can either be done by Apple or a third party repair company.
http://www.apple.com/support/ipod/service/prices/
You can Google "iPod battery replacement" for third party service centers.
B-rock

My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help.

My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.

By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position!

My iPod Nano 2nd gen. has a black caterpillar-like shape on the screen when turned off. I recharged and reset. What else should I do?

My iPod Nano 2nd gen. has a black caterpillar-like shape on the screen when turned off.
It disappears when turned on. It must mean something. I recharged and reset. What else, if anything, should I do?

You can work through the remaining five 5 R's of troubleshooting.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damage part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock

How can I fix my App Store on my iPod. When I go to the App Store and click on updates then click on purchased it won't load up the purchased apps. It says its loading then it flashes black and goes to my home screen. How can I fix it

My iPod has a glitch in the App Store. When I go to the App Store and click on updates then click on purchased it won't load up my purchased apps it says it is loading then it flashes black and goes to my home screen. How can I fix it??

Have you udated to iOS 6.0.1?
Otherwise
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My ipad gets a black bar over part of the screen then freezes up, please help

Just today my 16gb ipad 2 ,bought in December 2011, started to get a black bar over part of the screen. Sometimes 3/4 of the screen sometimes 1/4 then it freezes up and will not do anything. If I try to reboot it I get a faint backlit only. Any help would be appreciated!

On the iPad tap Settings > iCloud
Toggle Documents & Data off then back on then restart your iPad.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
On the iMac open System Preferences > iCloud
Deselect the box next to Documents & Data then reselect it then restart your iMac.

The image came up on my screen saying that I need to connect my iPod to iTunes, but I have a passcode, so it won't allow me to. And I want to try and turn it off, but my touch screen doesn't seem to be working either. HELP!

The image came up on my screen saying that I need to connect my iPod to iTunes, but I have a passcode, so it won't allow me to. And I want to try and turn it off, but my touch screen doesn't seem to be working either, so I can't even turn it off since you need to "slide to power off." HELP! I'm leaving on Thursday morning for six and a half weeks, and I absolutely need my iPod with me. I was just at the Apple store today for problems I was having with ANOTHER product, and I don't really want to drive all the way out to where my nearest store is (which is not very near) if I can figure this out at home. My iPod was working totally fine earlier today and last night, so I don't know what happened! Please, please, PLEASE HELP!

Now it's allowing me to reboot (hold down power button and home button and restart), but every time it just comes up to the same thing: the connect to iTunes page. Which is not possible. And I refuse to restore my iPod. PLEASE HELP.

How do I get black side bars on a full screen photo in iPhoto 11

How do I get black side bars on a full screen photo in iPhoto 11. It was black in iPhoto 09 and now it's a murky grey. I'm not talking about events or photo view where it's in preferences only full screen photo. Thanks

Go into iPhoto's Appearance preference pane and move the Background slider all the way to the left - black.
OT

My iphone 5 does not turn on anymore. when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

My iphone 5 does not turn on anymore. when i plug the charger in the apple icon turns on and off but the home screen never shows up.what do i do to fix it? how can i get my info back?

from the information you provided i can't tell if it is a hardware problem or a software problem. I do have an idea though, try to press your home button and lock button at the same time.

When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?

Hi all,
I need help with my iphone4s.
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?
What seems to be the problem here?
thanks and regards
Wan

Wanlucg wrote:
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

LaserJet Pro 200 color MFP M276nw/ a code 79 service error turn off then on, on screen the product

I have an HP LaserJet Pro 200 color MFP M276nw. I keep getting a code 79 service error turn off then on, on screen the product

I have same problem - this doesn't help. Did you did something that worked?

HT1338 There is a black caption/dialogue box on my screen and I can't get it to stop

There is a black caption/dialogue box on my screen and I can't get

HI,
Can we have a Pic ?
Why do you think it is connected to the Messages App ?
Realistically I would suggest the box is to do with anything but the Messages app.
10:22 PM Monday; October 22, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

After burned to dvd the edge are cut off in my tv screen. looks like zoomed

hi
i am FCPX user. i create my project using format (resolution )as showed on the pic below
after burned to dvd the edge are cut off on my tv screen. looks like zoomed as showed in the pic below.
thanks for taking ur time to help me!!
then i export using master file as
showed on pic below
and after i burn on to dvd my edge are cut off. here pic trying to show before burn on my mac and after burned on to dvd
before burned on to dvd on my iMac screen
AFTER BURNED ON TO DVD ON MY TV SCREEN
i really need ur help thanks
after burned to dvd the edge are cut off in my tv screen. looks like zoomed

Thanks Alchroma
i used this dvd burner just incase..
but i thought i might have wrong settings from begning.
do u thinik this setting is alright when creating DVD
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
Alchroma wrote:
That thought jumped into my head as well.
If the Safe Area settings are OK then it's well a settings issue in either the DVD player or TV or both.
Al
thanks again

Black Pwr off/on Cancel/ Accept screen?

Similar Messages

Maybe you are looking for