Black screen after 10.51 update, please help!

Installed Leopard on external F/W drive , although could not repair permissions on drive.I installed 10.51 then, display went black,and would not come on. Forced the machine to turn off. Disconnected external drive, pulled all the A/C cords,etc. Finally got it to start on the old Tiger OS on the internal drive.
Just got off the phone with Applecare and they gave me the old "We do not support 3rd party hardware". My external drive is a OWC 911 chipset drive with Tiger on the partition so I don't get it.
Is there perhaps something different about Leopard that precludes you from installing it on an external firewire drive?
Does Anyone have any ideas?

If cd boot was okay and attrib bcd was not, then the the bcd is apparently missing. Bad news. Time to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media.
Are there important files to recover first?
Even recovery with "0" is impossible, though it did work fine previous to this.
If the recovery discs were not created, you can obtain them from Toshiba.
Order Toshiba Recovery Media
-Jerry

Similar Messages

WINDOWS BLACK SCREEN AFTER VM WARE DEMO PLEASE HELP

I tried installing VM Ware Fusion Demo. I could not use my wireless mouse and keyboard, now I can't even startup with Windows. I get a black screen. Please help!

Go into safemode and uninstall the Nvidia driver you have installed and after restarting the computer and allowing extra time for windows to install a default driver for the graphics, install the Windows 7 driver for your computer found in the Toshiba download page for your laptop.
If you have issues with the screen blacking out after doing that, follow the instructions found here and this will correct that.
http://forums.toshiba.com/t5/Qosmio-Laptops/Qosmio-X305-Q701-Black-Screen-Crash-edit-Solution/td-p/9...
Welcome to the Toshiba user forums.
For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
Being super active is never a requirement

Black screen after windows auto update

New laptop in use for 3 weeks. After Windows auto update restart I get to splash screen and am able to enter Windows password to log onto desktop. After successfully entering password I am not able to view my desktop; I get the black screen with cursor function; cursor disappears when moved within an inch of left or right of screen (seems to go behind something). I believe I am at the desktop but just not able to view it, because I receive app popups on the black screen (need to update McAfee, etc).
In safe mode I restored to pre auto update date; manually installed all Windows updates; worked fine until NEXT auto update, same problem.
Graphics Card: Stock Intel HD Graphics
Monitor: Generic PnP
Why would it be fine with the manual update and not after auto update?
I do not have an external monitor to attach this laptop for diagnosis. I have run windows partition checks and hard drive partition checks with no issues to resolve.
I did get an error message once when running a diagnosis (can't remember which) : Windows Update Error 0x80070490
No real luck finding anyway for me (the average Joe) to resolve this issue.
If this is a harddrive issue I don't want to keep pussyfooting around while my warranty window shrinks.
I have downloaded driver updates from HP, but cannot get the Synaptics Touchpad driver to download. I don't think this is my issue though.
I am going to manually update all my drivers then manually update Windows. We will see what happens on the next auto update.
Please advise if this is an issue I need to just give up on and return this laptop for replacement. It seems like this is not a completely unheard of issue, but I'm shocked at what we are asked to do to attempt to resolve it. Out of my depth.

Hi @Justanothermom
Welcome to the HP Support Forums!
I understand that you are having troubles with a black screen after an update. I am happy to help you with this.
Firstly, there is nothing wrong with modifiying your update settings. I was going to suggest it myself as I read through your post, and then saw you ask the question. Sometimes updates can have unintended results by the creator. With all the different combinations of hardware, and the fact that updates come from different sources, it is one of those things that is hard to completely control.
Please see the following for how to make adjustments to your update settings.
Turn automatic updating on or off - windows.microsoft.com
Or if you know which update seems to be causing the issue you can take a look at this page:
win 8.1 August 12 updates - black screen after 2nd reboot - answers.microsoft.com
Let me know if this helps at all.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Qosmio F50-125 starts with black screen after an BIOS update

Hi
after instalation if new bios (v 2.0), computer sometimes starts with the black screen .
Even the first page that show press f2 to enter the bios is not shown.
Do you have somebody old version of the bios?
So I could try if it is the fault of it.

Hi
I think the old BIOS will not help you because the notebook would known that you are trying to update the BIOS to the older version and it would break up the procedure.
Furthermore the older BIOS is no available on the Toshiba European driver page.
I think just only a Toshiba ASP has got an older BIOS version.
Anyway, you said this happens sometimes.
This would mean that this issue doesnt persist always
Hmm. in such case I recommend settings the BIOS to the default settings and to update the display driver.
Check it out!

HP DV4-1155SE Black Screen and Wont Boot. Please Help!

Hello all I am working on an Hp DV4-1155SE. I have tested the memory modules, the hard drive and everything else that I can take out of the computer easily. Everything works but!, The laptop will not boot into the bios or anything else. Black screen, wont boot and i have the bios file that HP supplies on the support page of the site. I have looked at the instructions that a few people have posted about re flashing the bios and that does not seem to help me at all with this AMD processor. If anyone can please offer any help at all this would be greatly appreciated.
Thank you!

I will search on int 19h....thanks.
My problem started before the bios-screen.
This is what I tried this evening:
- Disconnected all non-essential devices...no effect.
- Cleared the CMOS...system booted to OS! Screens still garbled!
- Put in an older graphics-card...No artifacts!
- Put my MSI NX6600GT (AGP) back in...screen grabled while booting. Once in OS everything
looks fine at first. Later I noticed some odd random pixels. Playing movies is working fine.
Playing 3D games results in all kinds of strange looking artifacts.
- Installed the latest NVidia- drivers...no effect.
Is my problem still MOBO related or Graphics Adapter?
Any further advice?
Thanks!

HT201412 my iphone is not turning on its freeze on the black screen with the apple logo.Please help me guys iam fed up please its a humble request

my iphone is not turning on its freeze on the black screen with the apple

- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again.

Disk Space Disappearing After Today's Updates - Please help

Hi there everyone. I'm having major problems with my mac pro today, and for the first time, I cannot fix it. Please help me. I will try to explain what happenned. Like most, I was very excited about the release of ios 5 today. I downloaded the Lion 10.7.2 update, the ios 5 updates, iTunes and the iPhoto update. I installed of these without problems and then I enabled iCloud. I then decided to first update and restore my iPad 1 to ios 5. This worked perfectly fine and my computer was running fine. Then, I decided to update my iPhone 4 next. This is when I started running into problems. I updated it and then went to restore it from a a backup. This did not work, I got an error message that told me it was unable to restore the phone becasue it was unable to create backup.
So, I then checked the disk space for the main Lion drive and it was at zero. I thought, well I was sure I had at least a few gigs, but maybe I used them. So i deleted enough files to create 5GB of free disk space. I then tried to run it again, and I watched as my disk space slowly went down to zero again. I thought maybe it needed even more space than that. So I rebooted the machine and yet my disk space did not reappear. I had about 200mb when I rebooted. Then i noticed it was randomly fluctuating and went down to zero again. I then deleted another 3gb of files and created more disk space to try again. The same thing happenned again. I have now rebooted the machine again. When it first rebooted it had 500mb of disk space, it then fluctuated and went down to zero again. It is going between 67mb and zero every minute or two, and then goes up to 400MB, then reduces down to zero again. What is happenning? I have not opened any applications except for safari right now. Do we think there is a problem with my virtual memory or disk all of a sudden? It seems strange this happenned today. it must be related to one of the updates? I thought it might be icloud. So I have diabled that completely and the fluctuations have not stopped.
I would really appreciate any help anyone can give. I cannot think what the problem is. I cannot even run Techtool to check anything because nothing is working with no space for memory. Every time I delete files it goes down to zero anyway.
Thank you very much

How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

Intel iMac G5, black screen during erase and install -- PLEASE HELP!

My sister's Intel iMac G5 seriously has been a lemon, it has had SO many issues. It's now 2 years old, and has been rather slow for the maybe the last year, but over the last month or so it has gone way downhill, and it literally takes an hour to boot up, and 4-5 minutes to do anything (open an application, look at a photo in iPhoto, etc.). So, we've been trying to "erase and install" with her install discs to hopefully give the computer a clean boot and see if it helps at all. She has already backed everything up.
She started the erase and install last night, and it was going ridiculously slow. This morning when she woke up, the blue progress bar had gone about half way across. Then she went to get her kids ready, and when she came back in it looked like the computer was rebooting itself (gray screen with apple), but then the screen turned black and she can't do anything on it. Has anyone seen anything similar to this before?
We have had so much trouble getting this to work (we tried an archive and install a few days ago, but it gave her an error at the end). For about a day we couldn't even get the computer to boot up at all, but then miraculously yesterday morning it booted! Please help, I've converted her to Macs but if I can't get hers fixed she may never get one again!!

Does she have the Apple Hardware Test CD/DVD?

Serious issues with iMac, black screen during erase and install-PLEASE HELP

My sister's Intel iMac G5 seriously has been a lemon, it has had SO many issues. It's now 2 years old, and has been rather slow for the maybe the last year, but over the last month or so it has gone way downhill, and it literally takes an hour to boot up, and 4-5 minutes to do anything (open an application, look at a photo in iPhoto, etc.). So, we've been trying to "erase and install" with her install discs to hopefully give the computer a clean boot and see if it helps at all. She has already backed everything up.
She started the erase and install last night, and it was going ridiculously slow. This morning when she woke up, the blue progress bar had gone about half way across. Then she went to get her kids ready, and when she came back in it looked like the computer was rebooting itself (gray screen with apple), but then the screen turned black and she can't do anything on it. Has anyone seen anything similar to this before?
We have had so much trouble getting this to work (we tried an archive and install a few days ago, but it gave her an error at the end). For about a day we couldn't even get the computer to boot up at all, but then miraculously yesterday morning it booted! Please help, I've converted her to Macs but if I can't get hers fixed she may never get one again!!

I'm afraid that it's a contradiction in terms to talk about an intel iMac G5. What your sister has is an intel machine, and she will find good advice by posting to the [intel iMac Forum|http://discussions.apple.com/forum.jspa?forumID=1110].

My imac has a black screen after I turn it on, help!!

After the latest system update, my imac froze. I turned it off holding down the power button. Now every time I try to the system on, a black screen appears and nothing else happens. What do I do?

Looks like the same thing just happened to my wife's 20"G5 iMac. After the most recent update she said the system crashed then on startup after about a minute of the spinning wheel the screen went black ... nothing happened. So after leaving it for 20minutes I shut it down by holding down the startup button on the back ... same thing, and again a further two times. So the issue wasn't a one off.
Then as I started to surf discussions to come up with a solution it came right by itself ... I don't know what it was. Maybe it just needed more than 20 minutes to set itself up. Or maybe it just needed a few prods to get it started.
Just thought I had better try a restart again to see if the problem was actually solved ... same thing happened. Now after about ten minutes after startup it comes back on ... weird. No time for doing a whole lot more than that at the moment.

My macbook wont come on. black screen saying insert boot disc please help

Just tried to turn on my mac book. came up with a black screen and insert boot disc. never done this before. cant find my serial number on the mac book so cant find the support i need. please help

Mandalizabeth39 wrote:
thank you that worked great
You never answered my question, and if you have not changed anything then this will happen again
What choices were presented by the boot manager

My camera is not working, just a black screen, won't take pics please help

WWhy won't my camera take pics..just a black screen ?

CClose the camera app and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

T60p - Black screen after success bios update

Hello!
I have a big problem:
Today I update my T60p bios to the latest, downloaded from the support site, via the windows based factory utility as usual (I do it more than 4 times before). Everything seems OK, but after restart the notebbok won't start. The sysfan is spinning, the leds are lights, but the screen is black, and no reaction for any keypress.
How can I fix this problem?
Thank's for help,
Peter

Hello,
first you could take out your battery and press powerbutton 10 times.
Insert your battery again and try to start.
If your cd drive is running, I would suggest to download bios as an iso-file and burn it to disk.
Then try to boot with this cd and flash bios again.
If these methods don´t work, than you´ll have to send it to service.
Good luck!
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Black screen after windows 7 update?

Last night i left my Macbook Pro downloading a game on steam overnight, when i got up in the morning it seems like it restarted and went onto the mac login screen. So i restarted it into windows and it had been installing an update, and it said something like "installing clientregistry" with a number/number (it was the last step). It then restarted again and so i booted into windows, except after the screen where the colours fly around, i can see my cursor for a tiny bit then the screen goes black. You can tell it's still on as the fans continue to run and the brightness is a bit higher than what it would be if it was off. When i go onto the mac side, it says something like NTFS 3G force or abort, i chose force but it doesn't change anything. If i boot into safe mode in windows (when it detects it didn't shut down properly), i can get to the login screen and login but it says error cannot load profile, and it restarts after a certain time.
It's very important that my windows works as the only way i can access a copy of windows 7 disc is from school, and the holidays just started

Thanks for the reply,
if i hold fn+f8 it gives me heaps of options, i tried the safe mode and it loads a ton of things but gets stuck on class.pnp at the end. Before safe mode would work and let me in for a couple of seconds before a force restart with a smaller resolution, but now it doesn't go through? Also, i tried to install something called macfuse but it doesn't work properly and now i don't even think i can read the volume through my mac side. When i boot up it comes up with two warnings;
i) NTFS-3G Mount unsuccessful
The disk contains an unclean file system (0, 0).
The file system wasn't safely closed on Windows.
Fixing.
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8) the MacFUSE file system is unavailible(71)
ii) A very similar log as the one previously but with NTFS-3G written all over it
I'll uninstall macfuse as it proved useless. Before i could see the windows hd on the desktop, now it's just gone, maybe it's corrupted somehow? Should i try repairing it as one of the options in the safe-boot selection area?

Power Mac G5 won't start up after a security update, please help!!!

Hi all,
My Power Mac G5 version 10.4.11 keeps showing a black video, no beep, no start up chim, this occured after updating a security patch 2008-7 from Apple website, asked to reboot then I encountered this mess.
The powerlight is turn on with solid white color. My display also has its powerlight turn on with solid white. But not nothing happens, except the fan noise becomes gradually louder and louder. I wait for hours ... but ...
My system just won't start up. Although I tried to reset the SMU, reseated RAM...
I tried also to re-install the OS by CD but it's impossible to insert it to the DVD tray.
Any help is greatly appreciated, thank you for your time.
Sgmed.

Hi BDAqua,
After weeks of strugle I can use my MAC as normal, but everytime I shut it down, she cannot wake-up, I had to refer to your hints in order to start it up again. So right now I can use my MAC every day with "SLEEP" mode.
She just cannot RE-START or wake up after a SHUTDOWN.
Any suggestion is greatly appreciated, here under I pasted the log file retrieved from Disk Utilities.
(I tried also to reset PMU, SMU and PRAM but nothing helped. Perhaps she is in need of a brand new PRAM battery???
Oct 26 23:54:04: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Preparing to secure free space : “Untitled”
Creating Temporary File
Securely erasing file
Creating Temporary File
Securely erasing file
Secure Erase Free Space stopped after 14 hours.
89.0% complete.
Erase complete.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Group differs on ./private/etc/authorization, should be 80, group is 0
The privileges have been verified or repaired on the selected volume
Permissions verification complete
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Owner and group corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions corrected on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
Owner and group corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
Permissions corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
User differs on ./Users/Shared/SC Info, should be 0, owner is 501
Owner and group corrected on ./Users/Shared/SC Info
Permissions corrected on ./Users/Shared/SC Info
Group differs on ./private/etc/authorization, should be 80, group is 0
Owner and group corrected on ./private/etc/authorization
Permissions corrected on ./private/etc/authorization
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.5 GB (237,882,122,240 Bytes)
Used : 11.2 GB (12,042,969,088 Bytes)
Number of Files : 298,349
Number of Folders : 76,969
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
70 %)
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 27 20:59:00: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,949,358,080 Bytes)
Used : 11.2 GB (11,975,733,248 Bytes)
Number of Files : 298,359
Number of Folders : 76,970
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 28 00:31:37: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Oct 28 18:50:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 28 21:00:10: Disk Utility started.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Oct 29 19:55:10: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/Info.plist
Permissions differ on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player, should be -rwxrwxr-x , they are -rwxr-xr-x
Owner and group corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions corrected on ./Library/Internet Plug-Ins/Flash Player.plugin/Contents/MacOS/Flash Player
Permissions differ on ./Library/Internet Plug-Ins/flashplayer.xpt, should be -rw-rw-r-- , they are -rw-r--r--
Owner and group corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions corrected on ./Library/Internet Plug-Ins/flashplayer.xpt
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.6 GB (237,921,976,320 Bytes)
Used : 11.2 GB (12,003,115,008 Bytes)
Number of Files : 299,521
Number of Folders : 77,045
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Oct 29 20:22:20: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 17:14:49: Disk Utility started.
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,409,587,200 Bytes)
Used : 11.7 GB (12,515,504,128 Bytes)
Number of Files : 299,790
Number of Folders : 77,188
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 30 19:41:53: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Oct 31 20:48:58: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
1 HFS volume checked
Volume passed verification
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,362,040,832 Bytes)
Used : 11.7 GB (12,563,050,496 Bytes)
Number of Files : 300,773
Number of Folders : 77,858
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 15:48:08: Disk Utility started.
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions verification complete
The privileges have been verified or repaired on the selected volume
Name : Macintosh HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 2C999ACE-B114-3460-8FE0-4013F539F100
Capacity : 232.8 GB (249,925,094,400 Bytes)
Free Space : 221.1 GB (237,411,020,800 Bytes)
Used : 11.7 GB (12,514,070,528 Bytes)
Number of Files : 300,976
Number of Folders : 77,880
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
Nov 3 16:12:13: Disk Utility started.

Black screen after 10.51 update, please help!

Similar Messages

Maybe you are looking for