Black screen after adding scrolling title

Any ideas as to why I'm getting a black screen with the title scrolling through when I have unchecked the black box?

Is the clip long enough to accommodate the length of the title?

Similar Messages

P7-1235, black screen after adding a discrete graphic card

Hello,
I tried to install a discrete graphic card to my P7-1235. The card is AMD 7950, http://www.newegg.com/Product/Product.aspx?Item=N82E16814131478
The card was tested on another computer and could post without problems.
I upgraded the PSU to 600w. and plug both 6pin connectors to GPU. After I push the power button, the computer is running but the screen remains black, no video signal. I tried to connect the monitor to dvi on 7950 and integrated dvi but no luck. Anyone has any idea how to solve this?
Thanks so much!

Hello,
Issue might be related to Secure Boot in BIOS.
Put your original card into the system, and follow the steps on the document link below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03653200&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
This must resolve your problem.
Let me know.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Black screen after adding graphics card to H530

I am trying to install an EVGA Geoforce GTX 560 Ti into a H530. I have updated the PSU to 600w, and have tried to set the BIOS settings to the appropriate values. BIOS settings are: Display=AUTO, Secure Boot=Disabled, CSM=Enabled, Boot Mode=Auto (also tried Legacy), Boot Priority=Legacy First, Video Display=Auto (also tried PEG). Every time I install the card and boot, the screen comes up black. Once I remove the card, the display comes up normally. On board graphics uses VGA, GTX uses DVI. Any ideas?
Solved!
Go to Solution.

OK, this is embarrassing enough that I almost didn't write back. The monitor I was using has both VGA and DVI inputs. It apparently defaults to VGA and I found a source switch to select digital & now everything is cool.
Why I decided to write back, in addition to closing this out, is to point out that higher speed graphics cards can be supported on the H530. I installed an EVGA GTX560 Ti, which is not the fastest card in the world, but it looks like it compared to the list of cards cited in the maintenance manual which IMO are not enough of an improvement to bother with. Anyway, maybe the Bios settings I used will help someone else.

M5400 - Black screen after updating BIOS

As the title says, I've got this unwanted black screen after updating BIOS with update utility from here http://support.lenovo.com/us/en/downloads/ds037429
What I've tried :
- power / battery out, pressing power button several times for short / long and longer time
- BIOS battery out for about half an hour
- wincrisis with USB bootable stick and BIOS extracted from BIOS update utility from support.lenovo
- different combinations of keys such as : FN + B / F / R +/- win key
What should I do next except finding a hammer ?

Hey,
I am having the same problem, I was updating my bios.. followed all directions which is necessary to update them.
And then when it was almost ready it said "Bios update is not responding" so I waited... and waited because I did not want to abort it but then Vista aborted it for me.
Well at first it did not seem to be a problem but then I noticed that I could not click anything (was still in windows @ that time did not reboot yet) then I wanted to reboot but nothing worked.. Pressing off button for a time to shut down did not work.. So eventually power was out. And it shut down.
So I hooked it up again but nothing happened. Pressing the "on" button made it start.. The DVD-drive loaded for a second but... that is it just a black screen :S
Going to bring it back to the shop tomorrow.
Suxors

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

[SOLVED] Black screen after GRUB

Hello everyone
I was setting up a machine with E17 and was trying various DM's since none seemed to work. After attempting to use LightDM, I get a black screen after GRUB. I was trying to read the various logs at /var/log/ but I cannot understand them properly. I tried reinstalling entrance and LightDM with no luck. I even tried editing grub's entry appending '1' or 's' and still no dice. Any help would be appreciated.
Last edited by Linoman (2014-01-20 09:22:33)

Hi tnx for both answers.
I missed something important in Xorg.log. As you can see, fbdev and modesetting aren't loading as usual. I didn't check grub stuff, I don't think it's related, since loading in level 3 (text mode) I get a black screen but I can login as root and turn off the computer blindlessly.
[ 2.969] (II) LoadModule: "modesetting"
[ 2.969] (WW) Warning, couldn't open module modesetting
[ 2.969] (II) UnloadModule: "modesetting"
[ 2.969] (II) Unloading modesetting
[ 2.970] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2.970] (II) LoadModule: "fbdev"
[ 2.970] (WW) Warning, couldn't open module fbdev
[ 2.970] (II) UnloadModule: "fbdev"
[ 2.970] (II) Unloading fbdev
[ 2.970] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2.970] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 2.970] (II) VESA: driver for VESA chipsets: vesa
[ 2.970] (++) using VT number 7
[ 2.974] (WW) Falling back to old probe method for vesa
javex wrote:Post the content of the following files:
Also does disabling LightDM again help resolve the issue, i.e. can you get it to work without LightDM?
No, I can't get it to work changing DM's. I'm not sure if I pacman -Syu before changing DM's another time. Maybe it wasn't LightDM's fault afterall.
Spider.007 wrote:Additionally; try booting without the 'quiet' entry that is in the kernel line by default; and disable https://wiki.archlinux.org/index.php/Ke … de_Setting too
Thanks for pointing out that. I didn't knew I had it on.
Last edited by Linoman (2014-01-11 21:34:08)

[Solved]Black screen after "waiting for udev uevents to be processed"

Hello friends,
Starting from late Dec., my laptop goes black screen after "waiting for udev uevents to be processed", after updating kernel to 2.26.32.*. The strange thing is that even the screen is black, the keyboard is working. For example, I can turn on/off the status lights of capslock and others. I guess something might be wrong with udev uevents configuration with regard to the latest kernel. I've noticed that in the new kernel, there are two drivers for intel integrated graphics. My laptop has a 855G, which is supposed to be functional by both drivers, at least according to the kernel description. Maybe because the udev is configured to use the second driver (for newer graphic chips), rather than the first driver, which caused the problem?
Regards,
Wen
Last edited by Wen (2010-01-28 13:14:28)

Have a look here: http://bbs.archlinux.org/viewtopic.php? … 70#p695670

Black Screen After Windows 8 64-bit Upgrade (Clean Install) on TouchSmart IQ508A (IQ500 series)

Hi there,
Just installed Windows 8 and am getting a black screen after booting up like many others. I currently have disabled the graphics driver and this has solved the black screen issue but I can no longer use my web cam for Skype (although web cam works for W8 Camera App oddly).
To date I have tried the following:
Loading up the latest Nvidia drivers from the Nvidia website
Attempting to use the drivers for Windows 7 both in compatability mode and normally. I unzipped SP44488 to get this working
I know many others are having this problem so I really would like someone from HP to respond and state whether a Windows 8 display driver for the Nvidia GE Force 9300M GS is being developed.
I ran the compatability wizard prior to the clean install and it came up with no issues so I am very disappointed I am having these problems.
I've found out that HP have a customised version of the above card so that explains why the Nvidia drivers dont work so I believe HP is therefore obligated to provide a driver.
If anyone else is having similar issues please respond as this will hopefully lead to more action.
cheers
Steve

I'm in the same boat. On my IQ804, the Nvidia GE Force 9300M GS card crashes when I use NVidia's latest Windows 8 driver and Microsoft's LIVE UPDATE drivers. I have to resort to the Standard VGA driver in order for the pc not to crash into a black screen.
I read on another forum you can try installing a July 2012 version of the driver from NVidia and that should solve the problem. I tried it once. Using the July 2012 version, the screen would stay on longer, but eventually it crashes into a black screen...but definitely more usable than the latest from NVidia and Microsoft.
I too have heard that HP used a customized version of the graphics card and that's why neither HP nor NVidia's drivers work.
I also tried installing the Nvidia GE Force 9300M GS drivers for Windows 7 that I downloaded from the HP website. It didn't work either. It actually failed to install altogether, saying my system is incompatible.
As is, the pc works fine. But videos and games that require motion is noticably choppy.
Any help from HP??

Black Screen after logging in locally to Windows 7 that previously had an open RDP session.

Here is what happens. I leave my home computer on (running Windows 7 Ultimate) and sometimes I will remote to it from another location (work, friends house, or wherever). When I return home, I will go to login, the screen then goes blank (no mouse cursor
or anything). I have to do a cold boot to get back into Windows. This only happens if I ever RDP into it sometimes during the day. It seems random. I've tried logging off the RDP session, just closing it without logging off, nothing seems to be the answer
in that regard. It seems very random at times. I'll go a week and I can come home and it will login fine with no problems. Then the next week it starts giving me the black screen after I come home and login locally. I've seen several black screen issues here,
but usually they are getting it before logon. Anyone have a clue what might be causing this?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Black screen after login while on battery with graphics switching enabled

Getting a black screen after entering my password while logging into my account while on battery with graphics switching enabled. Everything is up and running, I just can't see it.
I can log into the guest account on battery
I can log into my account while plugged into power
I can log into my account on battery if graphics switching is disabled
I believe something that is starting up in my account is causing the system to switch from integrated to discrete graphics on login, and that switch isn't working correctly on battery power.
As a work around for now, I can run with graphics switching disabled, but I'd like to solve this so I get longer battery life.
MacBook Pro Retina 15"
Mountain Lion
All updates applied

I had the same issue and managed to reslove it.
Shut down your machine.
Power it back on while holding the 'shift' key (left or right, doesn't matter)
You will see a greay progress bar go across the screen while you boot in to 'safe boot'
Once booted, login, and go to Energy Saver and turn on 'Automatic Graphics Switching'.
Reboot back in to normal mode, and you should be able to log back in and see again.
I did this without being plugged into AC power.
Hope it helps!
Cheers!

Qosmio X870-149 - Black screen after Update to win 8.1

After an update to win 8.1 I got a black screen after login , the only thing I could do was to press zero during startup and make a recovery installation .
It took 40 houres , I do not know why it took so long , but when it was over, the HDD was completely empty , so I installed win 7 instead , since I had not made ??a recovery CD . The problem now is that I still get black screen in between , and thinking that it might be a heat problem , I still have warranty , but I do not know if it applies when I installed win 7 on the machine.
I still have a warranty on my toshiba Qosmio

Hi
Well, the warranty covers the hardware related problems. It does not cover any issues related to the software.
Now the open question is: why the black screen appears?
Is it hardware or software issue?
What happens if you access the BIOS?
Can you see anything on the screen?
Is something visible on the external monitor?

WINDOWS 8 BLACK SCREEN AFTER LOGIN PROBLEM

Please help me i have a problem with my computer it goes black screen after i login
my desktop is hp pavilion a5055d my os is windows 8 i dont know what the problem
i have a ati radeon xpress 1100 for videocard ..
I tried to restart many times.

Hi,
Did this issue occur before?
Try to logon with Safe Mode to see if the same issue occurs.
Furthermore, you can try to update BIOS for your machine?
You can refer these article to update BIOS if your machine cannot boot:
http://www.ehow.com/how_7356859_update-bios-windows-won_t-boot.html
http://www.wikihow.com/Fix-a-PC-Which-Won't-Boot
Hope that helps.
Leo Huang
TechNet Community Support

Black Screen After Upgrading to Windows 8

Hi
I'm experiencing a black screen after upgrading a Dell N5050 B890 to Windows 8.
Tried to refresh the installation but the problem persited. re-installed the Windows 8, the machine logged in successfully but the problem arose again after reboot.
Urgent assistance needed

This problem is solved...
I guess the problem is concerned with the display module controller in the BIOS which is having a slight compatibility issue with windows 8.
This issue is solved by updating the BIOS of your Laptop/PC to the latest version. You can download the latest BIOS from the website of the Laptop company/Motherboard Company.
But for updating the BIOS, you have to start your computer/Laptop for at least one time in Normal Mode. So here are the steps to do so...
1) Boot the Laptop/PC.
2) After the boot screen (The Circle Animation & Windows 8 logo), you will be presented by the lovely & awesome blank screen.
3) Wait for 1 minute so that drivers load into the memory.
4) Press the Power button of your laptop/PC for only a moment (Just Press and release it quickly. Don't hold. We don't want to shut down).
5) This will force the laptop/PC to go into Sleep mode.
6) When the laptop/PC goes in sleep, the laptop fan & other sounds will stop.
7) After 4-5 seconds, press the power button again & release it quickly.
8) Voilllaa!!! The laptop/PC starts & you are presented with the lock screen. Now..... Login! What are you waiting for! :P
This is not the permanent solution. It just lets you start you Laptop/PC.
After updating the BIOS, I strongly suggest that you must download the latest graphics driver for your Computer/Laptop to avoid any further issues.

When I create an album and then try to watch it in slideshow, I get only a black screen with a white title. No photos come up. Also when I click on an individual photo in the album, I get a white exclamation point on a black background but no big photo.

When I create an album of photos and then open the album and try to watch it by selecting "slideshow" I get only a black screen. The white title comes up briefly but then no photos, only a black screen. Also when I go back to the album and click on a thumbnail, up comes a big white exclamation point on a black background instead of the enlarged photo. Any idea what's going on?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

IOS adhoc displays black screen after launch

Hi,
my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
mxmlc
mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
adt
<target name="build-release-adhoc-package-ipa">
    <echo>::building captive-runtime release-adhoc ipa..</echo>
    <exec executable="${FLEX_BIN}/adt" failonerror="true">
        <arg line="-package" />
        <arg line="-target ipa-ad-hoc" />
        <arg line="-storetype pkcs12" />
        <arg line="-keystore ${provision.dir}/release-adhoc.p12" />
        <arg line="-storepass 12345" />
        <arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
        <arg line="${adhoc.dir}/ios-adhoc.ipa" />
        <arg line="${src}/mobapp-app.xml" />
        <arg line="myapp.swf" />
        <arg line="${icon.dir}/applicationIcon16.png" />
        <arg line="${icon.dir}/applicationIcon32.png" />
        <arg line="${icon.dir}/applicationIcon36.png" />
        <arg line="${icon.dir}/applicationIcon48.png" />
        <arg line="${icon.dir}/applicationIcon57.png" />
        <arg line="${icon.dir}/applicationIcon72.png" />
        <arg line="${icon.dir}/applicationIcon76.png" />
        <arg line="${icon.dir}/applicationIcon114.png" />
        <arg line="${icon.dir}/applicationIcon120.png" />
        <arg line="${icon.dir}/applicationIcon128.png" />
        <arg line="${icon.dir}/applicationIcon152.png" />
        <arg line="${base.dir}/[email protected]" />
        <arg line="-extdir ${src}/ane" />
        <arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
    </exec>
    </target>
please help.

Hi,
my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
mxmlc
mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
adt
<target name="build-release-adhoc-package-ipa">
    <echo>::building captive-runtime release-adhoc ipa..</echo>
    <exec executable="${FLEX_BIN}/adt" failonerror="true">
        <arg line="-package" />
        <arg line="-target ipa-ad-hoc" />
        <arg line="-storetype pkcs12" />
        <arg line="-keystore ${provision.dir}/release-adhoc.p12" />
        <arg line="-storepass 12345" />
        <arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
        <arg line="${adhoc.dir}/ios-adhoc.ipa" />
        <arg line="${src}/mobapp-app.xml" />
        <arg line="myapp.swf" />
        <arg line="${icon.dir}/applicationIcon16.png" />
        <arg line="${icon.dir}/applicationIcon32.png" />
        <arg line="${icon.dir}/applicationIcon36.png" />
        <arg line="${icon.dir}/applicationIcon48.png" />
        <arg line="${icon.dir}/applicationIcon57.png" />
        <arg line="${icon.dir}/applicationIcon72.png" />
        <arg line="${icon.dir}/applicationIcon76.png" />
        <arg line="${icon.dir}/applicationIcon114.png" />
        <arg line="${icon.dir}/applicationIcon120.png" />
        <arg line="${icon.dir}/applicationIcon128.png" />
        <arg line="${icon.dir}/applicationIcon152.png" />
        <arg line="${base.dir}/[email protected]" />
        <arg line="-extdir ${src}/ane" />
        <arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
    </exec>
    </target>
please help.

Black screen after adding scrolling title

Similar Messages

Maybe you are looking for