Black Screen after ASUS logo but before WINDOWS logo and logon screen

Ok. So I have a custom built PC with an i5 Intel core and windows7.
PC was working fine, but the next day after booting it up, I would get the usual ASUS logo with "press f2 or del to enter bios"... and this is usually followed by a 2 second WINDOWS loading bar going into the logon screen. But after the ASUS logo,
the loading bar doesnt show.. and the screen just dims like it went into sleep mode and nothing can wake it up or anything. The PC, fans and everything are still running and working fine.
From what Ive read up and researched on this so far.. it may most likely be some sort of admin/privilege issue. But I have no way of entering safe mode. Pressing/holding F8 brings up a boot up menu, not the advanced boot options to select safe mode T_T.
What do I do?

Hi,
Like Rick said, it sounds like your computer is with problem instead of Operating System.
Thus I suggest you send your computer to ASUS support center to take a hardware detection.
Karen Hu
TechNet Community Support

Similar Messages

The bettry of my i pad was too low finally it was switched off automatically then i putted on charging but the charging is started after 5% it went on automatically after apple logo and shut down suddnly plz help me what i have to do i restarted but same

i putted my low bettry i pad on charging but after 5% bettry it is goint to switch off automatically after apple logo and then suddnlywent switched off .i restarted again and again but the result are the same i need urgent help plz

Hi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W.

Apple iPhone Credit Purchase after 8/22 but before Price Cut

Does anyone know how you get a credit if you bought your phone after August 22 but before the price drop? I thought that the phone credit was higher if you bought after August 22 but before the price drop. Do you have to go into Apple Store as nothing is available on line.

Apple has a price protection
http://www.apple.com/iphone/storecredit/priceprotection/
Terms and Conditions for Price Protection
iPhones purchased from Apple and invoiced to you from August 22, 2007 through September 4, 2007, are eligible for price protection. The deadline for price protection claims is September 19, 2007. You must file your price protection claims at the Apple store (Apple Retail or Apple Online Store) where you purchased your iPhone. If you do not file your claim for price protection by September 19, 2007, you may submit a claim after that date for a $100 Apple Store credit via the procedure outlined at www.apple.com/iphone/storecredit. For purposes of these Terms and Conditions, that procedure’s restrictions against claims for iPhones purchased between August 22, 2007, and September 4, 2007, will not apply if you have not made a claim for price protection by September 19, 2007. NOTE: If you purchased from AT&T, visit the store where you made your purchase for price protection details. (If you purchased from AT&T and were not able to obtain price protection, you also are eligible to submit a claim for a $100 credit under these provisions.)

Trying to open itunes but a window opens and says . this version of itunes has not been correctly localised for this language. please run. the English version. i have never had this before. please help

Trying to open itunes but a window opens and says , this version of itunes has not been correctly localised for this language. Please run the English version. Please help.

Hey mcooper156,
I would try the troubleshooting steps in this first article:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
If that doesn't resolve the issue, then I would try and remove iTunes (and its related software) then reinstall:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Regards,
Delgadoh

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig?

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig? IPConfig /flushdns doesn't help at all. Until they fix it I will be previewing and buying my songs thru Amazon.

Doublechecking ... do you still get that if you update to iTunes 10.6.3.25 (just released today)?
http://www.apple.com/itunes/download/

I am trying to startup InDesign but a window opens and reads, cannot load BNCORE.RPLN plugin. It requires 10.2 version of Indesign. Need compatible version of BNCORE.RPLN. What do I do at this point

I am trying to startup InDesign but a window opens and reads, cannot load BNCORE.RPLN plugin. It requires 10.2 version of Indesign. Need compatible version of BNCORE.RPLN. What do I do at this point

reinstall ID. The update was not successful.

My iPhone will only operate when connected to the PC, 2 minutes max after I disconnect it, the screen reverts to black with the apple logo and then completely black. Restoring makes no difference; any ideas anyone? en

my iPhone fell on the floor yesterday; now it will ony operate when connected to the PC - then it works fine. If I disconnect it from the PC, the screen reverts to black with the apple logo, eventually completely black; iPhone is unresponsive until reconnected to PC. Any ideas anyone?

You broke it.
It's time to find yourself a competent 3rd party repair shop or just buy a new phone. I believe you can get an out of warranty replacement from Apple for $149 (not absolutely positive they still offer them for the 3G), but given the age of the phone and the cost, a new one might make more sense.

2011 Macbook Pro white screen after apple logo and spinning wheel

Hey there guys,
My 2011 Macbook Pro has encountered some problems. Firstly while i was at school, i opened up my computer, usually the computer would require you to type your password, but my login page became fuzzy, white lines everywhere. So I restarted my computer and everything was okay. After that i came back home, my computer was running fine, after surfing the net for a few hours, my whole computer suddenly became blue. So what i did was i just restarted my computer, after that my computer would boot up Apple logo would come up, the spinning wheel would also come up, after 30-40 secs it would turn black screen and come back on as a white screen and would just stay like that. It would be on the white screen. Tried some rebooting ways but all didn't work.
1st: I wanna know whats the problem?
2nd: Is this a harddrive failure? (Because i have alot of important documents and personal stuff in my hard drive and i hope it isn't a crashed hardrive)
Thanks for your help..
PS: Im running on Moutain Lion, but i have no idea what version it is.

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

HT1459 my screen has gone black from my ipod touch but its still on and sounds?

My ipod was recently fixed because the screen was cracked then like two days later i drop my ipod but the fall wasnt even that bad when i check to see if my ipod is ok i notice that my screen is all blac but my music was still playing i tried iMessaging myself throuch my sisters ipod and it sounded i also tried facetimeing myself and my screen was all black but My sisters ipod saw me perfectly i also noticed my ipod was making very weird noises during the face time. i tried charging it but nothing happend. My sleep button doesnt wor either. Please help me!!!!!

Hello susilovesyou1,
I would be concerned too if my iPod touch only displayed a black screen. I found an article with steps you can take when you experience and issue like this:
Display has no backlight or dark screen
Try turning the iPod touch off and then on again.
If the issue persists, try to reset the iPod touch while it is connected to power.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPod touch: Hardware troubleshooting
http://support.apple.com/kb/TS2771
Thank you for using Apple Support Communities.
Best,
Sheila M.

Updating my ipad and the screen has gone black with just the logo and update bar. I cant turn it on/off

Udating my ipa and the screen has gone black with just the apple logo and an updat bar. I cant turn it on/off.

TRY THIS TRICK.... IT HAS HELPED ME SO MANY TIMES!!!
hold down the power button and the home button for about 6-8 seconds or until the screen goes black....

Iphone4 doesn't want to sync with iTunes. First The screen running but then after waiting a while, a window pop and told me the sync can't be completed because timed out. Help. Thanks A lot !

Please help syncing my music. Most of them not sync because I checked a box for syncing only selected songs, from the last time I did sync. Now, the songs won't come back to my iphone.
HELP

Simplify your question,will you? I have trouble in reading such a long English article.

My iphone 4 screen went black (has only apple logo) and it has some sort of codes on the top of screen. It won't turn off or on. what is going on?

I tried to turn it off and on but it won;t even do that...the screen is displaying several lines of some type of codes...
what is going on?

Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
If that does not work, take it to an Apple store genius bar for evaluation.

[JS CS5] Resizing graphics after importing XML, but before placing on page

I've been looking for an answer for this for a long time, and judging by the other posts here, many others are also.
Given an XML file consisting of:
<root>
     <products>
          <product>
               <image href="file:///filepathhere"/>
               <description>
          <product>
               <image href="file:///filepathhere"/>
               <description>
I can import this into a layout, and drag the products element to a text frame. All the images appear inline, and then I run a script that uses XML Rules to locate the images, resize the image frames, and apply an object style. The trouble is, that once in a while the images references by the XML are so enormous that they simply exceed the bounds of the pasteboard, and things blow up.
So what I want to do instead, is to somehow resize the images to a manageable size BEFORE I drag the products element into a text frame.
Ole posted a possible solution here: http://forums.adobe.com/message/1108974#1108974
In that post, he says that "If you're using CS4, can use the resize method to resize graphics that have not yet been placed in a layout." I've been trying to implement his "rough" script, and I can't work it out.
This is what I have:
var myRuleSet = new Array (new processImage);
with (myDoc) {
     var elements = xmlElements;
     __processRuleSet(elements.item(0), myRuleSet);
function ProcessImage(){
     this.name = "ProcessImage";
     this.xpath = "/root/products/product/image";
     this.apply = function(myElement, myRuleProcessor){
          var myImage = myElement.graphics.item();
          myImage.resize(CoordinateSpaces.innerCoordinates, AnchorPoint.centerAnchor, ResizeMethods.multiplyingCurrentDimensionsBy,[.1,.1]);
          myImage.parent.fit(FitOptions.frameToContent);
          return true;
"myImage" isn't valid in the script above. Does anyone know if this is possible, and if so, what I'm doing wrong? Thanks for any light anyone can shed on this!

After spending some more time with this today, I've realized that what Ole was talking about here: http://forums.adobe.com/message/1108974#1108974. He said that "If you're using CS4, you can use the resize method to resize graphics that have not yet been placed in a layout."
What he was referring to was graphics that are in overset text, not graphics in XML that have been imported but not placed.
So, there is no way that I know of to process images and image frames in imported XML that hasn't been placed in the layout yet.
But, a good workaround to my problem that I developed was to first place the imported XML into a very tiny temporary text frame, so that all images are immediately overset. Then I process the images to a manageable size using the resize method, per Ole's suggestion. Then, and only then, do I move the content onto my layout. This avoids problems with graphics being pointed to in the XML that may be too large for the pasteboard.
I hope this obscure technique is useful for someone!

Crashed After I paid but before I downloaded

I was using up an iTunes Gift Card and after I'd bought a few songs iTunes crashed before they were done (but after the amount was removed from my account) downloading. I've never had a problem clicking away at several songs in a few seconds while they queue up and download. In all, I was charged for four songs I never got.
How do I get them? I actually expected that when I restarted iTunes the download would resume.

Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
What is the Other on my iPhone and How to Remove It
An "other" largeer than aboutn 1 1/2 GB usually indicates that the "other" includes corrupted files.
First try:

IDVD halts after encoding videos but before audio

I have made many iDVD's of our travel pictures, including both pictures and videos. However, my current iMovie won't complet e the process and always stops after encoding the videos but does not encode the audios. At that point, the gumball just sets there and spins for many hours (overnight, etc.) and when using the "force quit" the drop down says iDVD not responding" in red. I have tried about 5 times with no result. Any suggestions as to what I should do will be appreciated. Thank you. R. L. Anderson, M.D.

Hang in there. This is "Normal." In fact, contrary to what the computer is telling you, the computer is processing the audio.
Adding audio to your iMovie causes this problem. There are two work arounds.
1. Export your iMovie back to your camcorder, then input the movie back into a new iMovie, add your chapters and export to iDVD. The audio encoding may hang up but it will only be for a few minutes.
2. Export iMovie as a Quicktime movie, then reimport the Quicktime movie to iMovie, add chapters, export to iDVD.
If you search this the iDVD forum for "audio encoding" you'll see loads of messages on this topic.

Black Screen after ASUS logo but before WINDOWS logo and logon screen

Similar Messages

Maybe you are looking for