Black screen after being wet

What to do about my phone. It is working, i let it set for 4 days but now the screen is dark, but i can still see it and it works ok.
Anyone know how i should resolve this ?

try this remedy as posted on lifehacker the other day....
http://lifehacker.com/269427/dry-out-your-soaked-gadgets-in-rice
A Washington Post reporter who accidentally dropped his Blackberry in the toilet was able to retrieve it and dry it out to working order again: by leaving it turned off in a bowl of uncooked rice. Reader Chris writes in to say:
There's a grain of truth (punny, huh?) to this in that rice quickly ***** up the surrounding moisture. Make sure the environment is free from excess humidity, drop the wet device in a container of rice and let it sit. For a better desiccant, it'd be a good idea to store all those little silica gel packets that come in anything from shoe boxes to moisture-sensitive gadgets.

Similar Messages

IPOD Nano 4th Gen still plays but has black screen after being washed

A few months ago my mother washed my iPOD Nano 4th Gen by accident - we had it in a bag of rice for a long time. After a while it refused to start up so we put in a drawer and hoped it would "magically" fix itself.
Few months later... it works (plays music, can select menus..)!
But the screen is black, lol.
I have tried restoring it in iTunes, also resetting the Nano repeatedly with the buttons and fiddling with the hold button, but none of it works... Could the backlight be shot after being damaged in the wash? Is it possible for Apple to restore it even though my warrenty is now gone?
Any help would be greatly appreciated!

Welcome to the Apple Support Communities
Your problem isn't covered by warranty, so you will get a refurbished iPod. See how much it will cost > http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod

6600gt unresponsive black screen after being idle?

everything works fine now that i have installed the 67.03 drivers on my 6600gt. the speeds are great, overclocking working, and runs very well on my games. but now when i leave my computer for a long period of time, when i come back, the computer is still running but the monitor is shut off. and the light blinks every two seconds. it never did this before. is this a known issue with driver version 67.03? The latest forceware drivers didn't work. always use driver cleaner pro and follow exact instructions. im not getting any artifacts and as long as i am playing a game, or basically doing anything, the monitor will stay on. only happens after being idle. i have screen saver disabled, nothing set to go on standby and hibernation is disabled.
MY SYSTEM Specs:
here is some more information...
CPU:
AMD Athlon(tm) 64 Processor 3000+
Manufacturer AMD
Family AMD Athlon(tm) 64 Processor 3000+
Architecture 64-bit
Internal Clock 1.8 GHz
Internal Clock Maximum 3.0 GHz
External Clock 201.0 MHz
Socket Designation Socket 939
HyperThreadingTechnology N/A
Capabilities MMX, CMov, RDTSC, 3DNow!, Extended 3DNow!, SSE, SSE2, PAE, NX
Version AMD Athlon(tm) 64 Processor 3000+
Caches
Level 1 128 KB
Level 1 128 KB
Level 2 512 KB
DX INFO:
Version 9.0c
Long Version 4.09.00.0904
Direct Draw info:
Version 5.03.2600.2180
Primary Device NVIDIA GeForce 6600 GT
Video Card
NVIDIA GeForce 6600 GT Driver 6.7.0.3
Description NVIDIA GeForce 6600 GT
Manufacturer NVIDIA
Total Local Video Memory 128 MB
Total Local Texture Memory 128 MB
Total AGP Memory 256 MB
Driver File nv4_disp.dll
Driver Version 6.7.0.3
Driver Date 11-4-2004
Driver WHQL Certified true
Max Texture Width 4096 px
Max Texture Height 4096 px
Max User Clipping Planes 6
Max Active Hardware Lights 8
Max Texture Blending Stages 8
Fixed Function Textures In Single Pass 8
Vertex Shader Version 3.0
Pixel Shader Version 3.0
Max Vertex Blend Matrices 0
Max Texture Coordinates 8
VGA Memory Clock 1.0 GHz
VGA Core Clock 9.7 MHz
PCI
Name NVIDIA GeForce 6600 GT
Vendor ID 0x10de
Device ID 0x0140
SubSystem ID 0x00000000
Revision ID 0x00a2
MOBO:
MSI K8N NEO 4 w/nvidia nforce 4 Ultra/standard Chipset based
Supported Slot Types ISA, PCI
Manufacturer MICRO-STAR INTERNATIONAL CO., LTD
Model MS-7125
Version 1.0
BIOS Vendor Phoenix Technologies, LTD
BIOS Version 6.00 PG
BIOS Release Date 09/09/2005
BIOS Properties Plug and Play, Flash
System Devices
Name PCI standard host CPU bridge
Manufacturer (Standard system devices)
Name PCI standard host CPU bridge
Manufacturer (Standard system devices)
Name PCI standard host CPU bridge
Manufacturer (Standard system devices)
Name PCI standard host CPU bridge
Manufacturer (Standard system devices)
Name PCI standard ISA bridge
Manufacturer (Standard system devices)
Name NVIDIA nForce PCI System Management
Manufacturer NVIDIA
Name NVIDIA nForce4 Parallel ATA Controller
Manufacturer NVIDIA Corporation
Name NVIDIA nForce4 Serial ATA Controller
Manufacturer NVIDIA Corporation
Name NVIDIA nForce4 Serial ATA Controller
Manufacturer NVIDIA Corporation
Name NVIDIA Network Bus Enumerator
Manufacturer NVIDIA
Name Realtek AC'97 Audio
Manufacturer Realtek
Name Standard OpenHCD USB Host Controller
Manufacturer (Standard USB Host Controller)
Name Standard Enhanced PCI to USB Host Controller
Manufacturer (Standard USB Host Controller)
Name PCI standard PCI-to-PCI bridge
Manufacturer (Standard system devices)
Name nForce4 PCI-Express Root Port
Manufacturer NVIDIA
Name nForce4 PCI-Express Root Port
Manufacturer NVIDIA
Name nForce4 PCI-Express Root Port
Manufacturer NVIDIA
Name nForce4 PCI-Express Root Port
Manufacturer NVIDIA
Name nForce4 HyperTransport Bridge
Manufacturer NVIDIA
Operating System Info:
Operating System Microsoft Windows XP
Version 5.1.2600
Service Pack Service Pack 2
Windows Environment 32-bit
Locale US
Desktop Width 1024 px
Desktop Height 768 px
Desktop BPP 32 b
hard drive info
Hard Disk Info
Hard Disk Drive 1/2
Name ST340014A
Manufacturer (Standard disk drives)
Capacity 37.27 GB
Model ST340014A
Interface Type IDE
Hard Disk Drive 2/2
Name WDC WD200BB-00DEA0
Manufacturer (Standard disk drives)
Capacity 18.65 GB
Model WDC WD200BB-00DEA0
Interface Type IDE
Power supply:
Thermaltake 430 watt
Model: XP550 NP
AC INPUT:115/9A
   230/5A
   DC OUTPUT
AC INPUT:115/9A +3.3V +5V +12V -5V -12V +5VSB
   230/5A
frequency: 47-63 hz 20A 30A 18A 0.5A 0.8A 2A

Quote from: perdition on 23-July-06, 17:23:48
now it does it after while playing a game although it takes about 2 hours for it to happen. i reinstalled os again. new drivers, my monitor just goes to standby. i tried another monitor, does the same thing. any suggestions?
yep, re-check VGA colling sysmtem. it may VGA overheat. it may coused also by RAM instability. run memtest to check it and prime95(sp2004) to test memory stick(s) stability.

Ipad2 showing black screen after being upgraded to ios5

I upgraded IPad2 to ios5 through Mac, since then - for 5 hours - it has apple on black screen and mur-murs something every 5 minutes. For how long might it continue ?

Hello BitMazta, please tell us a little more about your computer:1.) More detail on the model number (example Probook 4710S).2.) How much ram does your computer have? 3.) I have two great links at this recent thread that could help you: Upgrade to Win 10 Good luck!

Black Screen After Windows 8 64-bit Upgrade (Clean Install) on TouchSmart IQ508A (IQ500 series)

Hi there,
Just installed Windows 8 and am getting a black screen after booting up like many others. I currently have disabled the graphics driver and this has solved the black screen issue but I can no longer use my web cam for Skype (although web cam works for W8 Camera App oddly).
To date I have tried the following:
Loading up the latest Nvidia drivers from the Nvidia website
Attempting to use the drivers for Windows 7 both in compatability mode and normally. I unzipped SP44488 to get this working
I know many others are having this problem so I really would like someone from HP to respond and state whether a Windows 8 display driver for the Nvidia GE Force 9300M GS is being developed.
I ran the compatability wizard prior to the clean install and it came up with no issues so I am very disappointed I am having these problems.
I've found out that HP have a customised version of the above card so that explains why the Nvidia drivers dont work so I believe HP is therefore obligated to provide a driver.
If anyone else is having similar issues please respond as this will hopefully lead to more action.
cheers
Steve

I'm in the same boat. On my IQ804, the Nvidia GE Force 9300M GS card crashes when I use NVidia's latest Windows 8 driver and Microsoft's LIVE UPDATE drivers. I have to resort to the Standard VGA driver in order for the pc not to crash into a black screen.
I read on another forum you can try installing a July 2012 version of the driver from NVidia and that should solve the problem. I tried it once. Using the July 2012 version, the screen would stay on longer, but eventually it crashes into a black screen...but definitely more usable than the latest from NVidia and Microsoft.
I too have heard that HP used a customized version of the graphics card and that's why neither HP nor NVidia's drivers work.
I also tried installing the Nvidia GE Force 9300M GS drivers for Windows 7 that I downloaded from the HP website. It didn't work either. It actually failed to install altogether, saying my system is incompatible.
As is, the pc works fine. But videos and games that require motion is noticably choppy.
Any help from HP??

Black screen after login while on battery with graphics switching enabled

Getting a black screen after entering my password while logging into my account while on battery with graphics switching enabled. Everything is up and running, I just can't see it.
I can log into the guest account on battery
I can log into my account while plugged into power
I can log into my account on battery if graphics switching is disabled
I believe something that is starting up in my account is causing the system to switch from integrated to discrete graphics on login, and that switch isn't working correctly on battery power.
As a work around for now, I can run with graphics switching disabled, but I'd like to solve this so I get longer battery life.
MacBook Pro Retina 15"
Mountain Lion
All updates applied

I had the same issue and managed to reslove it.
Shut down your machine.
Power it back on while holding the 'shift' key (left or right, doesn't matter)
You will see a greay progress bar go across the screen while you boot in to 'safe boot'
Once booted, login, and go to Energy Saver and turn on 'Automatic Graphics Switching'.
Reboot back in to normal mode, and you should be able to log back in and see again.
I did this without being plugged into AC power.
Hope it helps!
Cheers!

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

[SOLVED] Black screen after GRUB

Hello everyone
I was setting up a machine with E17 and was trying various DM's since none seemed to work. After attempting to use LightDM, I get a black screen after GRUB. I was trying to read the various logs at /var/log/ but I cannot understand them properly. I tried reinstalling entrance and LightDM with no luck. I even tried editing grub's entry appending '1' or 's' and still no dice. Any help would be appreciated.
Last edited by Linoman (2014-01-20 09:22:33)

Hi tnx for both answers.
I missed something important in Xorg.log. As you can see, fbdev and modesetting aren't loading as usual. I didn't check grub stuff, I don't think it's related, since loading in level 3 (text mode) I get a black screen but I can login as root and turn off the computer blindlessly.
[ 2.969] (II) LoadModule: "modesetting"
[ 2.969] (WW) Warning, couldn't open module modesetting
[ 2.969] (II) UnloadModule: "modesetting"
[ 2.969] (II) Unloading modesetting
[ 2.970] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2.970] (II) LoadModule: "fbdev"
[ 2.970] (WW) Warning, couldn't open module fbdev
[ 2.970] (II) UnloadModule: "fbdev"
[ 2.970] (II) Unloading fbdev
[ 2.970] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2.970] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 2.970] (II) VESA: driver for VESA chipsets: vesa
[ 2.970] (++) using VT number 7
[ 2.974] (WW) Falling back to old probe method for vesa
javex wrote:Post the content of the following files:
Also does disabling LightDM again help resolve the issue, i.e. can you get it to work without LightDM?
No, I can't get it to work changing DM's. I'm not sure if I pacman -Syu before changing DM's another time. Maybe it wasn't LightDM's fault afterall.
Spider.007 wrote:Additionally; try booting without the 'quiet' entry that is in the kernel line by default; and disable https://wiki.archlinux.org/index.php/Ke … de_Setting too
Thanks for pointing out that. I didn't knew I had it on.
Last edited by Linoman (2014-01-11 21:34:08)

[Solved]Black screen after "waiting for udev uevents to be processed"

Hello friends,
Starting from late Dec., my laptop goes black screen after "waiting for udev uevents to be processed", after updating kernel to 2.26.32.*. The strange thing is that even the screen is black, the keyboard is working. For example, I can turn on/off the status lights of capslock and others. I guess something might be wrong with udev uevents configuration with regard to the latest kernel. I've noticed that in the new kernel, there are two drivers for intel integrated graphics. My laptop has a 855G, which is supposed to be functional by both drivers, at least according to the kernel description. Maybe because the udev is configured to use the second driver (for newer graphic chips), rather than the first driver, which caused the problem?
Regards,
Wen
Last edited by Wen (2010-01-28 13:14:28)

Have a look here: http://bbs.archlinux.org/viewtopic.php? … 70#p695670

Black Screen after logging in locally to Windows 7 that previously had an open RDP session.

Here is what happens. I leave my home computer on (running Windows 7 Ultimate) and sometimes I will remote to it from another location (work, friends house, or wherever). When I return home, I will go to login, the screen then goes blank (no mouse cursor
or anything). I have to do a cold boot to get back into Windows. This only happens if I ever RDP into it sometimes during the day. It seems random. I've tried logging off the RDP session, just closing it without logging off, nothing seems to be the answer
in that regard. It seems very random at times. I'll go a week and I can come home and it will login fine with no problems. Then the next week it starts giving me the black screen after I come home and login locally. I've seen several black screen issues here,
but usually they are getting it before logon. Anyone have a clue what might be causing this?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Qosmio X870-149 - Black screen after Update to win 8.1

After an update to win 8.1 I got a black screen after login , the only thing I could do was to press zero during startup and make a recovery installation .
It took 40 houres , I do not know why it took so long , but when it was over, the HDD was completely empty , so I installed win 7 instead , since I had not made ??a recovery CD . The problem now is that I still get black screen in between , and thinking that it might be a heat problem , I still have warranty , but I do not know if it applies when I installed win 7 on the machine.
I still have a warranty on my toshiba Qosmio

Hi
Well, the warranty covers the hardware related problems. It does not cover any issues related to the software.
Now the open question is: why the black screen appears?
Is it hardware or software issue?
What happens if you access the BIOS?
Can you see anything on the screen?
Is something visible on the external monitor?

WINDOWS 8 BLACK SCREEN AFTER LOGIN PROBLEM

Please help me i have a problem with my computer it goes black screen after i login
my desktop is hp pavilion a5055d my os is windows 8 i dont know what the problem
i have a ati radeon xpress 1100 for videocard ..
I tried to restart many times.

Hi,
Did this issue occur before?
Try to logon with Safe Mode to see if the same issue occurs.
Furthermore, you can try to update BIOS for your machine?
You can refer these article to update BIOS if your machine cannot boot:
http://www.ehow.com/how_7356859_update-bios-windows-won_t-boot.html
http://www.wikihow.com/Fix-a-PC-Which-Won't-Boot
Hope that helps.
Leo Huang
TechNet Community Support

Black Screen After Upgrading to Windows 8

Hi
I'm experiencing a black screen after upgrading a Dell N5050 B890 to Windows 8.
Tried to refresh the installation but the problem persited. re-installed the Windows 8, the machine logged in successfully but the problem arose again after reboot.
Urgent assistance needed

This problem is solved...
I guess the problem is concerned with the display module controller in the BIOS which is having a slight compatibility issue with windows 8.
This issue is solved by updating the BIOS of your Laptop/PC to the latest version. You can download the latest BIOS from the website of the Laptop company/Motherboard Company.
But for updating the BIOS, you have to start your computer/Laptop for at least one time in Normal Mode. So here are the steps to do so...
1) Boot the Laptop/PC.
2) After the boot screen (The Circle Animation & Windows 8 logo), you will be presented by the lovely & awesome blank screen.
3) Wait for 1 minute so that drivers load into the memory.
4) Press the Power button of your laptop/PC for only a moment (Just Press and release it quickly. Don't hold. We don't want to shut down).
5) This will force the laptop/PC to go into Sleep mode.
6) When the laptop/PC goes in sleep, the laptop fan & other sounds will stop.
7) After 4-5 seconds, press the power button again & release it quickly.
8) Voilllaa!!! The laptop/PC starts & you are presented with the lock screen. Now..... Login! What are you waiting for! :P
This is not the permanent solution. It just lets you start you Laptop/PC.
After updating the BIOS, I strongly suggest that you must download the latest graphics driver for your Computer/Laptop to avoid any further issues.

Images burn into the screen after being there for only a few minutes?

What's wrong with my mac if images burn into the screen after being there for only a few minutes?
I can have an icon, like a folder or something, on my desktop for only a few minutes and then when I move it an image of it will be burned into the screen for another few minutes. Same thing happens with having a webpage open for a few minutes or word document. What part of my computer is malfunctioning and is Apple responsible for repairing it?

Hi,
Does it happen on all desktops applications as well as Modern UI Apps? Since this issue only happened recently, I suspect a newly-installed third party program causes this issue, please check these programs if possible.
We can also boot into clean boot mode, test the issue.
http://support.microsoft.com/KB/929135
Run a virus scan to eliminate some malware\virus
Similiar issue
https://social.technet.microsoft.com/Forums/en-US/125204a0-937e-4bc6-bb60-8fe3244b4514/all-windowsapplications-keep-minimizing-on-their-own-windows-81?forum=w8itprogeneral
Yolanda Zhu
TechNet Community Support

IOS adhoc displays black screen after launch

Hi,
my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
mxmlc
mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
adt
<target name="build-release-adhoc-package-ipa">
    <echo>::building captive-runtime release-adhoc ipa..</echo>
    <exec executable="${FLEX_BIN}/adt" failonerror="true">
        <arg line="-package" />
        <arg line="-target ipa-ad-hoc" />
        <arg line="-storetype pkcs12" />
        <arg line="-keystore ${provision.dir}/release-adhoc.p12" />
        <arg line="-storepass 12345" />
        <arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
        <arg line="${adhoc.dir}/ios-adhoc.ipa" />
        <arg line="${src}/mobapp-app.xml" />
        <arg line="myapp.swf" />
        <arg line="${icon.dir}/applicationIcon16.png" />
        <arg line="${icon.dir}/applicationIcon32.png" />
        <arg line="${icon.dir}/applicationIcon36.png" />
        <arg line="${icon.dir}/applicationIcon48.png" />
        <arg line="${icon.dir}/applicationIcon57.png" />
        <arg line="${icon.dir}/applicationIcon72.png" />
        <arg line="${icon.dir}/applicationIcon76.png" />
        <arg line="${icon.dir}/applicationIcon114.png" />
        <arg line="${icon.dir}/applicationIcon120.png" />
        <arg line="${icon.dir}/applicationIcon128.png" />
        <arg line="${icon.dir}/applicationIcon152.png" />
        <arg line="${base.dir}/[email protected]" />
        <arg line="-extdir ${src}/ane" />
        <arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
    </exec>
    </target>
please help.

Hi,
my iOS application displays black screen after slash screen.nothing happens and couldn't see any proper errors on debug utility.
I can build adhoc using flash builder and it's works fine but problem occurs when I create ipa using dumped config file on command line(ant)
I'm using flex sdk 4.6 and AirSDK 15.0(overladed) .my application includes few native extensions.
mxmlc
mxmlc -load-config app-config.xml src/mobapp.mxml -output myapp.swf
adt
<target name="build-release-adhoc-package-ipa">
    <echo>::building captive-runtime release-adhoc ipa..</echo>
    <exec executable="${FLEX_BIN}/adt" failonerror="true">
        <arg line="-package" />
        <arg line="-target ipa-ad-hoc" />
        <arg line="-storetype pkcs12" />
        <arg line="-keystore ${provision.dir}/release-adhoc.p12" />
        <arg line="-storepass 12345" />
        <arg line="-provisioning-profile ${provision.dir}/release_adhoc.mobileprovision" />
        <arg line="${adhoc.dir}/ios-adhoc.ipa" />
        <arg line="${src}/mobapp-app.xml" />
        <arg line="myapp.swf" />
        <arg line="${icon.dir}/applicationIcon16.png" />
        <arg line="${icon.dir}/applicationIcon32.png" />
        <arg line="${icon.dir}/applicationIcon36.png" />
        <arg line="${icon.dir}/applicationIcon48.png" />
        <arg line="${icon.dir}/applicationIcon57.png" />
        <arg line="${icon.dir}/applicationIcon72.png" />
        <arg line="${icon.dir}/applicationIcon76.png" />
        <arg line="${icon.dir}/applicationIcon114.png" />
        <arg line="${icon.dir}/applicationIcon120.png" />
        <arg line="${icon.dir}/applicationIcon128.png" />
        <arg line="${icon.dir}/applicationIcon152.png" />
        <arg line="${base.dir}/[email protected]" />
        <arg line="-extdir ${src}/ane" />
        <arg line="-platformsdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPh oneOS.sdk" />
    </exec>
    </target>
please help.

Black screen after being wet

Similar Messages

Maybe you are looking for