Black screen after installing Boot camp Win7 on iMac 27 late 2009

I've run out of ideas as to how to fix this problem. I have a late 2009 iMac quad i5, Mountain Lion, 12GB RAM, 1TB HD (recently exchanged under extended warranty).
I stopped counting how many times I have tried to get this up and running but I followed a whole bunch of 'how to's' on the net, including the official Appple guide, but I always end up with a black screen. I insytalled it from scratch using both, Apple drivers on CD and SD card and I can confirn that they installed correctly during my last try. That time I first installed Win Vista, then upgraded to Win 7. I took out the install DVD after first restart and left the SD card in its slot (correctly named, as suggested by Apple). the installation finished, the screen went dark for about 5 min, then the computer rebooted, the screen went dark again for another few min and after that the vomputer restarted again but this time all stayed dark and nothing happened for the better part of an hour.
I also restarted from the Win install disk and tried to remove the ATI drivers using command lines, as suggested in one post.
I need to run Win in Bootcamp because some application I use are very demanding so I need Win to run natively. In an earlier attempt I managed to boot Win7 from the Bootcamp partition in Parallels and I installed the Apple Drivers in that environment but it still resulted in a black screen. I also tried to remove the ATI drivers from Drivers directory manually in MacOS mode but the System wouldn't let me edit the Syustem folder at all, not even in Root user mode.
I understand that I'm not the only one with problem and I feel for you, but please refrain from "me too" posts becuase it doesn't really solve my problem. Thank you.

I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
I don't know what links you have so i'll just include everything:
Installing boot camp on a Late 2009 iMac:
http://support.apple.com/kb/TS3173
Direct link to Late 2009 iMac-specific Windows drivers.
http://support.apple.com/kb/DL995
I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
Hope this helps.

Similar Messages

Mid-2010 Mac Mini - black screen after installing boot camp drivers

I successfully installed Windows XP Service Pack 2 on my new Mac Mini. The display worked without issue in XP at this point.
After doing this, I proceeded to install the boot camp drivers. They installed and automatically rebooted the machine.
After reboot, Windows XP no longer has a functioning display. The display is a black screen and eventually the monitor shuts off.
Things I've tried:
- Reset PRAM
- Reset SMC
- Tried both Mini DisplayPort and HDMI connections to connect to the HDMI port on the monitor
- Booting into Safe Mode. Holding down F8 successfully brought up the Safe Mode options, but again the display was blank after choosing the Safe Mode option and attempting to load Windows.
Message was edited by: mullingitover

Update: Other stuff I've now tried--
- Swapping out RAM modules. I've tried it with the stock 2GB sticks in place, also with a single 4GB stick. Same result.
Other interesting/troubling problems:
- Unable to boot into Safe Mode with command line. The text-only interface with safe mode options that is reached by pressing F8 during windows startup is displayed. However, no matter which option I choose, the result is a dead display.
- Unable to boot with Windows XP install CD (?!). After choosing the CD at the boot selection screen, the display blanks and never wakes up.

Bluetooth Keyboard/Mouse/Trackpad won't automatically connect after installing Boot Camp

Hey guys!
Another peculiar thing happened to me today with my 3-week-old maxed-out 2012 iMac (other than it kernel panicking when I powered it down the other day...did I mention this was 3 weeks old?).
After installing Boot Camp which I will never do again, my iMac (on the OS X side) no longer recognizes my stock Apple Wireless Keyboard, Magic Trackpad, or Magic Mouse automatically, until I press a button on the keyboard and wait 5 seconds, click the trackpad and wait 5 seconds, or click the mouse and wait 5 seconds.
(The Windows 8 Boot Camp side pairs with the devices immediately after Windows boots, which leads me to believe that the bluetooth devices are defaulting to look for Windows.)
One of my huge fears I had when considering purchasing an iMac is that the Bluetooth devices wouldn't immediately connect. Being a power-user with former Mac notebooks and working understandably fast having owned a web development company for 8 years now and not having to worry about Bluetooth device pairing, I'd like to think this fear is substantiated. But after first use (before installing Windows 8 with Boot Camp Assistant) it functioned normally and the iMac would automatically discover my peripherals and connect them by the time time computer turned on. I also had no trouble holding the Option key on boot to select a boot device....
Now, ever since I set up Windows 8 on the Boot Camp partition and paired the keyboard/mouse/trackpad to Windows, the Mac side completely ignores the keyboard/mouse/trackpad until I click a button on each.
I'm trying to keep it together but this is raging me out.
I went into Windows, immediately unpaired the 3 peripherals from windows and now use a wired keyboard/mouse with Windows (yay, desk space!), deleted the items entirely from the bluetooth panel, then booted to Mac and did the same thing. I then re-paired the devices to the OS X side andddd...no go! Still doesn't find them automatically. I am extremely upset by this and can't seem to fix it.
To summarize, my two issues are:
A. The iMac in OS X does not automatically recognize my bluetooth peripherals until I click a button on each and wait a couple seconds for them to pair.
B. I cannot hold Option to select a boot device (or choose Windows/Mac for example) because the computer doesn't recognize the keyboard until OS X boots and I press a key.
Please...for the love of god...someone help me, and stop me from formatting my entire computer over this issue.

I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?

I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!

I just installed 16gb in my 21" iMac late 2009 and I have macbook 13" late 2008. Can I put the 2gb 2rx8-8500s-07-10-f2 ram in the laptop. Does anyone know the difference of 2gb 2rx8-8500s-07-10-f2 and 2gb 2rx8-8500s-07-10-f1 . thank you!

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Boot Camp - Black Screen after installing Windows 7

Hello guys!
I have tried to install Windows 7 several times and so far no success.
Everything goes fine until I complete Win7 installation.
Then when I install Boot camp drivers the computer prompts for reboot.
After the login screen, I am able to log in, but the screen turns into BLACK!.
And I cannot do anything but shut it down with the power button. I can still hear that the laptop is on, but screen stays black.
I have tried removing the ATI and NVIDIA Drivers as recommended in this forum:
http://forums.macrumors.com/showthread.php?t=840528
But so far I get the same result over an over.
Anybody is facing the same issue?
I have MACBOOK PRO
MAC OS X 10.6.8
AMD Radeon HD 6490M (ATI)
Intel HD Graphics 3000
Quad Core i7 Chip, 4GB RAM 500GB HD
Please Help!!

I did install : Display Driver + Catalyst Control Center dowloaded from AMD support website:
http://support.amd.com/us/gpudownload/Pages/bootcamp-win7.aspx
The result is still the same - BLACK SCREEN
I rolled back to initial configuration.
Then I installed the AMD driver.
In device manager it shows as the AMD Radeon HD 6490M driver for the display/Graphics card
Everythig is fine until I install the Boot camp drivers.
Then after the reboot I face the same issue.
However the driver for AMD still stays there in the devive manager.
Any other ideas, suggestions?
thanks!!

Blue screen of death after installing Boot Camp on Windows 7

Hello and thanks for the help!
Brnad new user to Boot Camp here. After a new install of Windows 7, I install Boot Camp but then when rebooting Windows I get the blue screen of death. When letting Windows attempt a repair, it fails and I am forced to Recover Windows 7 to a state before I installed Boot Camp.
Help!?

Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

Pavilion dv6-1230us Black Screen after installing Windows 7...Please Help

Hi,
I recently installed Windows 7 and everything was working fine until my computer went into hibernation. Before this, I installed all the drivers and software from the HP website for my computer for Windows 32 bit setup. After my computer went into hibernation, my computer will not start up in normal mode; rather, it starts in safe mode only. When its starts in normal mode, the screen just turns black and nothing happens. The login screen comes up perfectly fine but after I login at startup, the screen just turns black. Please help, I don't know what else to do whether it is a driver or software issue from the software from the HP site.
Thanks,
Daniel

Did you check Apple Support Boot Camp article?
iMac displays a black screen during installation of Windows 7
http://www.apple.com/support/bootcamp/
Installation Guide
Instructions for all features and settings.
Boot Camp FAQGet answers to commonly asked Boot Camp questions.
Windows 7 FAQAnswers to commonly asked Windows 7 questions.

2010 Mac Pro Boot Camp - Refuses to boot Windows after installing Boot Camp drivers

Hey all,
I have a quad 3.2Ghz 2010 Mac Pro with a Radeon 5870 and 8 GB RAM.
I have 2 10000RPM WD Raptor drives, the first drive is my Lion boot drive. The 4th bay contains the second Raptor which has Windows 7 Ultimate 64 bit installed. Bay 2 has Time Machine, bay 3 has a Windows backup drive.
I had first installed Windows and the Boot Camp drivers a few months ago and everything was humming along smoothly. Monday I tried to boot into Windows and it crashed immediately after the black Booting Windows screen started to change to the login window. This happened repeatedly. Nothing changed on the system that I am aware of. Whenever I tried to boot windows again, it booted into the repair mode. That did not seem to work because after running the repair it would still not boot.
So I did what is usually required of Windows, and that was to reinstall. I reformatted the hard drive, ran Boot Camp assistant, and started the install.
Everything was peachy so far, so I tried to reinstall the Boot Camp drivers (4.0). Did a reboot. Same problem. Doh!
So I did ANOTHER reinstall, and everything was fine. But this time I tried to install the Boot Camp drivers off the os install disc that came with my Mac (3.1). Still no go!
So finally I did my third reinstall and after that I did not install Boot Camp drivers. However, I did load up the CD and individually installed drivers for the Apple Mouse, Apple Keyboard, Cinema Display, etc. No problems whatsoever. Everything is actually still humming along fine.
So it looks like running the full Boot Camp install for some reason no longer works. Which means I am missing the Apple Boot Camp control panel, but that's not really a big deal. Althought it's quite annoying to not have the functionality of the special Mac keyboard keys like volume control, etc.
Has anyone run into this? I thought it might be a hardware problem but my Mac OS X OS exhibits no problems whatsoever.
Thanks!

Thank you to The hatter.
I have a Mac Pro mid 2010 with a SSD and several internal hard disks. For some time I was trying to install Windows 7 on a fresh boot camp volume on a new WD 7200rpm 1TB hard disk. It was taking hours to install, and then I had a series of failures to reboot that proved permanent. The Window Repair utility would come up and took forever to repair the volume - but failed to actually do so, requiring completion reinstallation of the bootcamp volume. This occurred three times, between 1 day and 2 months after installation. I had already moved the Windows drive in to drive slot 1 of the Mac Pro.
Eventually I gave up and installed boot camp on a secondary partition of the SSD. This worked fine, however is limited in capacity. So yesterday I thought I would try to install Windows on the hard disk again. The Windows installer took many hours to do its thing, and eventually a message came up that the installation had failed.
I took your tip about possible hard disk failure, and ran Techtool Pro surface scan. It turns out that there are lots of bad blocks being reported. According to Micromat's documentation, the bad blocks being reported are those that may be in critical areas of the disk that cannot be mapped out. They recommend low level reinitialisation (with zeros) to map out the bad blocks, if possible. I am now running Apple's Disk Utility to do this, and fingers crossed that this reinitialisation succeeds, or I will have to replace the drive.

Vista Blue Screen after Successful Boot Camp installation (32 and 64 bit)

OK so there are a number of people with issues relating to the BSoD after a successful (or not) implemetation of Bot Camp and Windows XP and/or Vista. One of the identified problems relates to the NVIDIA GEforce 9600m GT display driver which crashes out AFTER windows performs its update routine.
Having removed and installed the partition (to ensure a clean install each time), the inescapable conclusion is that the NVIDIA driver is to blame for the crash dump, but it is one of the many MS updates that is the root cause of the failure. If you do a clean install of Vista 32 or 64 Ultimate and install the Boot Camp 2.1 (build 1256) and DO NOT allow updates, the system is not only stable, it runs like a train!
I have Contacted AppleCare about this (as my new MBP is only a few days old) and they have not even heard of the problems. NVIDIA have obviously got issues with something as the driver has been updated to a BETA on their web site, but this will not work on a Mac as it cannot seem to find the hardware to allow the update to complete.
If (like me) you have bought an MBP for support issues for both Mac and Windows users, this is a showstopper and one that is about to cause me to ask for my money back. So far, the nice shiny and new MBP is back in its box pending a 140 mile trip back to Exeter from whence it came.
SHARK!

Boot Camp was a response to public challenges at the time to see who could find how to install Windows on a Mac - which is totally okay thing.
Then you want Apple to do more than any normal PC vendor selling a laptop where people have to do things like deal with BIOS, drivers and all the things you have had to deal with, for Windows.
I'm not disagreeing, let alone arguing, I agree that hardware abstraction layer type stuff Apple would need to do. But I don't think Apple needs to do more than get Windows installed. Drivers, AV, and all the stuff that comes with Windows doesn't change. But it should not BSOD when you install something you are told you need.
I wouldn't be surprised though to see Windows 7 eventually support Apple hardware out of the box so to speak.
Cookie cutter answers are part of today's customer experience "level one" is no level at all, but a lot of times - and it takes a lot of work - to translate feedback and problems into "cook book" before you get to the troubleshooting (level 2 and above).
Which is why I read sites like MacIntouch; subscribe to MacFixit (tons of articles on a CD along with shareware). And books.
Nvidia has terrible drivers in OS X on the Mac Pro (workstation) while ATI has had very good drivers and OpenGL support.
I prefer to have more choice and freedom when it comes to drivers. As for engineering and how things get qualified (use to see even SCSI hard drives had to be qualified for both the OS; the controller to be used; driver version; firmware; etc).
What I see is the first shipped BIOS/EFI firmware on any device or system is not the one you want.
Back in the 70's I was introduced to "bleeding edge" but we would get premiere on-site support if we were willing to install, adopt, some new IBM service, software/hardware. And sometimes we were there on Sunday on holiday weekends.
One person just could NOT after doing everything under the sun, get Adobe CS4 to install on their new $5000 Mac Pro 2009. Got a new system, worked perfectly.
In 2008 Early Mac Pro, most all systems would freeze on wake from sleep. Took two months before an EFI update was issued that cured the problem. There is/was also a problem with "inrush current" and PSU.
I had Blue Screen with Vista. Repeatedly.
At first I thought it was a new MICROSOFT 4000 keyboard.
Later I wondered if it was my Apple OEM Nvida 7300GT (and some are failing but it worked in OS X) so I bought 2nd, a PC 8600GTS.
And pull 3rd party PCI Express controllers (FW800, SATA 1x, SATA 8x cards).
Came away and thought "oh, it was the 3rd party card" when that seemed to work.
Around the same time I had bought a new WD Caviar 750GB SATA drive.
It was that drive that would cause problems with Vista after the install.
I thought it was something in Microsoft Windows Update that was causing my personal ****, not my equipment. And MS for their drivers. Somebody else's.
And mind you, I would go through install half a dozen times, try installing Boot Camp before updates, after updates, not at all, add AV software.
I finally -- after a full year -- learned a lot (don't learn from things just working and I still say it has always been "Plug and Pray" PnP ) things work. I know the frustration and aggravation and the wish that things were different somehow.
The BSODs that I got were not from Apple Boot Camp. I even ran my system w/o Boot Camp for six months. And this time, with Win7, everything worked fine, wake, sleep, networking, no need for Apple drivers. At all.
I hang out on a forum where people build their own, X58 board, Intel Core i7, eVGA graphics. And how to get even DDR3 to work, and then how to get the most out of and push it to the extreme, then throttle back a notch.
The nice thing about that is you learn from it, like you do from racing and sports, to build a better mousetrap.
Nvidia is bleeding. Even as they and ATI want to stay on leading edge. Intel is contracting (even as they have their best cpu technology ever coming out) and costs that should go into R&D may be harder to "justify" or all the prototype programmers engineers and testing labs. Everything is more commoditized than ever.
Bottom line: I have Leopard 10.5.6. It has Boot Camp 2.1.2 version, later than the 2.1 download. And there has not been a single update posted online. But my original Leopard DVD 10.5.0 has the SAME contents packaged as 2.0 as were in the 1.4 Beta. I spend $129 for a new DVD to get the latest drivers. Make sense?? of course not.
Oh, and my Mac with 64-bit hardware, cpu, the EFI BIOS is 32-bit so no official support from Apple to install BC 2.1.2 or use Vista 64-bit. Snow Leopard will be 64-bit kernel, require and enforce 64-bit drivers. Should be interesting. Because technically, and logic, would say I don't have a true 64-bit BIOS environment.
Got an iMac? not supported with 64-bit. MacBook 2008 had 64-bit support, but not the "Late 2008" there you need MacBook Pro. And yet everyone wants to address more than 2GB (Apple EFI32 allows access to 3.3GB on some, 1.9GB on others, and in my Mac Pro? limited to 1.9GB memory in Windows.... so you know I don't want to run a Xeon workstation in Windows 32-bit.

Black Screen after installing Windows 7

Ive had this problem in the past and im aware that you need to install the correct display / bluetooth drivers for windows 7 for the iMac 27" 2.8Ghz i7 4GB ddr3
i have Lion installed and up to date with Bootcamp Assistant 4.0.1
i wanted a fresh windows 7 install and didnt think that i would need to mess around with downloading drivers etc. WHY with the release of Lion and the updated version of Bootcamp Assistant (and it downloads 'windows support software' prior to install) do i get the black screen!!
THIS IS SO ANNOYING as i live in a poor broadband area (2mb max) and each time i install to get this working it take AGES to download 'WINDOWS SUPPORT SOFTWARE' which doesnt address the issue
c'mon Apple your better than this!!

Did you check Apple Support Boot Camp article?
iMac displays a black screen during installation of Windows 7
http://www.apple.com/support/bootcamp/
Installation Guide
Instructions for all features and settings.
Boot Camp FAQGet answers to commonly asked Boot Camp questions.
Windows 7 FAQAnswers to commonly asked Windows 7 questions.

HT4818 after installing boot camp 4 on mountain lion " Missing operating system"

Hello
I hade a small Windows 7 partition , so after updating to mountain lion , I wanted resize win partition .
I made an image of it , then deleted win partition from utility disk , ( wrong idea )
I didn’t notice that boot camp could erase win partition , anyway I have tried several times , and always after reboot boot camp
I get the same
Missing operating system .
If I boot from dvd install win or if i boot from the boot win partition.
hd and partitions looks OK to utility disk
Any idea to fix the problem ?

I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
I don't know what links you have so i'll just include everything:
Installing boot camp on a Late 2009 iMac:
http://support.apple.com/kb/TS3173
Direct link to Late 2009 iMac-specific Windows drivers.
http://support.apple.com/kb/DL995
I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
Hope this helps.

Black Screen after computer boots to Win XP With NX6600 VTD 256

My son recently purchased a new computer and gave his old one to me to salvage what I wanted.Since he just a few months ago purchased my NX6600 VTD 256 from me I naturally salvaged that first. I tried to install the NX6600 in my other son's computer without success. First the particulars:
MSI 845 Pro2 Mobo, 512 mb 133 Mhz Ram, 1.7 Ghz Intel CPU, Aopen AO350 12A PNF power supply, 350 watts with 18 amps on the 12 volt rail.
I did a fresh install of winXP on a freshly formatted HDD. Installed service pack 2, the latest intel drivers, and 5 different versions of the driver packages including ver 77.77 all with the same results.
After the computer boots I am intermittantly faced with a black screen after the WinXP logo disappears. This sometimes happens 3 times in a row before I get a working screen. After a good boot the NX6600 benchmarks good with very good marks!
I am at this point strongly suspecting the power supply is not up to the task, even though the specs for the NX6600 recommend a 350 watt power supply. Before I start removing all the hardware from the computer except for the NX 6600 to see if I have a hardware conflict, I doubt this because with the NX6600 installed without drivers I get a good boot every time.
I'm open for suggestions.

Thanks for the reply boss killer.
I tried what you suggested with a CRS power supply 300 watts with 15 amps on the 12 volt rail.
with the exact same results.
I then put the crs powersupply back into #1 son's old case reinstalled the nx6600 and gave it a go
Particulars for the old computer ECS K7VTA3 ver. 1 Mobo with 512 Mb DDR, nx6600VTD256 vid card and the CRS Power supply 300 watts with 15 amps on the 12 volt rail , and win XP pro service pack 2.
Funny the card works great without any problems with this setup! And the powersupply is 50 watts less and only 15 amps as compared to the other with 18!
I then pulled all the hardware out of #2's computer and tried it with only the memory, cpu, and NX6600 connected.
I had to boot 5 times before I had a working screen.
Now I'm thinking that there is somthing amiss with the NX6600 and the MSI 845 Pro2 ???
I'm thinking that I would be better off installing the K7VTA3 in #2 son's computer with the NX6600, since this works fine. When I did a benchmark with this setup it outperformed the *45 Pro 2 NX6600 combination By 300 points 2600 as compared to 2300 aqua mark points.
Isn't this fun?

How to create extra partitions for windows 7 after installing boot camp

hello
i am pretty new at imac so bare with me and i really need help.
IMAC
OS X version 10.9.5 ( i think its os X mavericks ??)
iMac 21. inch , Late 2013
iMac model identifier iMac 14,1
i installed boot camp windows 7 and it works perfectly, after i tried to create two partition using disk utility for windows 7 (ms-dos) format because i really want to separate my files on other partition instead of everything on Boot Camp drive. after i restart choosing windows OS i cannot go back to windows 7.
i hold option on the keyboard but does not show window 7 so i went back to Apple ox s , found my boot camp hd on the desktop with files in it. checked boot camp assistance showing
" The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. "
i read alot of article about but i don't seem to understand much about
i understand alot of people created these kind of topics
please if someone can help me solve this problem again
i only want an apple os , boot camp for windows 7 and 2 extra partitions for storage , my hard drive is 1TB
thank you

Last login: Mon Feb 16 16:11:46 on console
YLFs-iMac:~ ylf$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            999.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 WININSTALL              8.0 GB     disk1s1
YLFs-iMac:~ ylf$ diskutil cs list
No CoreStorage logical volume groups found
YLFs-iMac:~ ylf$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         PMBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1951845952      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1952255592     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1953525128           7
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
YLFs-iMac:~ ylf$
Also i do not have boot camp installed yet because like i said, it messed up my boot camp after i created the partition thats why i removed boot camp, right now i only have APPLE OS

Internal Microphone doesn't work (after installing Boot Camp 3.1)

I have installed Boot Camp 3.1, and after this installation, my internal mic doesn't work (ONLY IN WINDOWS XP).
I tried to fix the problem with several manners (hardware test in CONTROL PANEL / SOUND .../ VOICE TAB / VOICE RECORDING; reinstalling drivers and hardware etc), but I can't get success (for example, the test results: SORRY, NO SOUND IN MIC...).
On the other hand, when I boot as Mac (Snow Leopard), I can use the mic (in skype, for example), without problem.
I note that ear plug (connector in the back of the iMac) doesn't work too.
Somebody can help me in this case ?
Regards
JGFilho

i got a macbook pro, 2 weeks ago, the 2.53Ghz unibody aluminium, the desing of this mac is great even tough the system specs are really low for the price actually, im happy with it(the hardware)...
The only reason i got this is cause apple claims to support windows, i like Mac OS, but i work on windows i need it... if theres no windows capability in mac i wouldnt ever buy one, so this issue is really bothering me A LOT. my impresions about apple are changing after seing this topic filled with questions and not a single moderator answer, go and check a logitech forum and see how they take care about user problems.

Windows 7 Freezes at Restart After Installing Boot Camp Drivers

Hi,
I have a MacBook Pro and am having troubles installing 32-Bit Windows 7. All seems to be functional until I install the Boot Camp drivers included on the Install Disk. I have tried using the Boot Camp 3.1 update, but the same problem occurs. After the computer freezes on the install page, I can no longer access Windows (even in Safe Mode) and am forced to restart the entire process (that is, repartition the hard drive and reinstall Windows).
If I don't install the Boot Camp drivers, Windows seems to be functional, so I'm pretty sure it's something in the Boot Camp package causing the trouble.
Is anyone else having this problem? Any ideas or workarounds?

I finally got it to work. You need to go to the NVidia website and install their drivers. I think the Apple supplied ones are out of date and are causing Windows to hang. Install Boot Camp from the supplied DVD, install the update that Apple supplies through the newly installed Boot Camp, and then go to the NVidia website to manually download the drivers. I used the GeForce 300M series installer. Make sure you do all of this before letting Windows restart.
I had a few issues with it hanging a few times, but once I was able to get into Windows it seems to be working. All of the other Apple supplied drivers seem to work.

Black screen after installing Boot camp Win7 on iMac 27 late 2009

Similar Messages

Maybe you are looking for