Black screen after the last virsion!!

Hi..
After I downloaded the last update, my iphone5 didn't work!! it shows me a black secreen with itunes, so I connected my iphone with itunes but nothing is change.
Can you help me with my problem as fast as you can
Thank you

Hello sundusmoh,
It sounds like you are seeing an image indicating that you need to connect the phone to iTunes, and when you connect it the issue persists. From what you are describing it seems like the device is in recovery mode, so I would restore it per the information in the following article:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
All the very best,
Sterling

Similar Messages

  • IPhone 5s goes black screen after the Apple logo is displayed

    Recently, my iPhone 5s keep restarting when I am using it and a blue screen appeared before the restart process. But worse, this time, my iPhone stays on the black screen after the apple logo is displayed and it is turned off automatically after a couple seconds, what happened and what should I do?

    Hi CarltonKwok,
    If the screen on your iPhone turning on completely, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • Can't boot my T500 anymore... just getting to a black screen after the XP logo

    I have a big problem with my Lenovo T500. Never had any problems before. Then yesterday, I could not open OpenOffice anymore, neither convert to pdf from an already open OpenOffice document. I got error messages saying the programmes can't be openend. After trying to re-install Adobe Reader failed, I simply wanted to restart the computer, seeing if that oculd help. And now the big problems started...
    Re-booting was not possible. For 20 seconds, it seemed normal. But directly after the Windows XP logo (using
    Windows XP Professional 1), the screen went black and that was it. I see the mouse cursor and can move it, but that's it.
    After waiting some time, I turned the laptop off with the power button. And restarted it. This time getting to the screen where I could choose "safe mode" or normal startup, because the computer had been shut down improperly. First I tried normal mode, which lead to the same black page. Then I did the same again and tried "safe mode", which didn't work either - I just got the black screen with the "safe mode" notifier in every corner.
    What I tried then was the ThinkVantage button directly when starting the computer. Which lead me to the "rescue and recovery" menu where I could choose what to do: Complete recovery, losing personal files (it's about music, pictures, text documents for me) or quick recovery without losing files. Also there was the option of saving files before through USB. This is what I tried first. I marked 50GB of files and wanted to transfer them. Problem: Every external harddrive or USB stick I connected was not identified. So this failed.
    I chose to go with "quick recovery" first then. This took about 20mins. When it was done there was an automatic re-start which unfortunately got stuck at the black screen again...
    3 more re-starts using the power button did not bring anything either. The ThinkVantage button does not let me access the rescue and recovery menu anymore. It just says something like "checking the system" and then there is an automatic re-boot, which ends up at the black page.
    I am mighty scared now that I lost my computer and the data on it (I have backups for most things, but still).
    Does anyone know anything that could be done now? I do not have XP or anything, by the way. I bought this computer used a year ago and got it complete with XP installed (although I do have the product key). The warranty from the place expired 5 days ago and the place is in Germany, but I live in Sweden. They told me they can't help me but I should contact a local repair place.
    If anyone has an idea about what the problem could be (virus??) and maybe some help, I would be VERY VERY thankful.

    Maybe I should add that I probably didn't do the best thing with anti virus programs. I used Microsft Security Essentials, which was installed when I bought the computer.
    When downloading some program (not sure whether it was Acrobat Reader), I was asked to get McAfee. Kind of weird, I had said no. But McAfee somehow checked my computer and told me my MP4 player contained a trojan. That was 5 days ago. Security Essentials couldn't find it, even scanning the MP4 player directly. I guess I should have switched right away and to get McAfee to remove the thing? Maybe this is what caused all the trouble...

  • Black screen after the installation of the graphics driver

    Hello,
    - Recently I bought a 'GT 610' graphics card to replace the old broken one,
    - after the assembly one short beep was audible during system reboot (=OK),
    - a default windows graphics driver was installed by Windows Vista,
    - screen resolution manually set at native screen resolution (1280 x 1024),
    - (youtube movies as well as flash player worked fine),
    - the installation of the (most recent) nVidia driver went smoothly (the old driver on CD did not!),
    - after the nVidia driver installation the system restarted itself to activate the driver.
    So far so good.
    - Unfortunately after rebooting the screen got black and remained black,
    - no log-in screen, only the typical Windows start-up screen with the green progression bars was temporarily visible,
    - in safe mode I had to disable the nVidia driver to restart Windows in normal mode.
    - At this moment I can use my computer for desktop application like MS Office, email or internet browsing, not for video editing or gaming.
    Question: How to enable the nVidia driver to use the graphics card's full capacity?
    Thanks.

    - Yes, the GT610 is a genuine MSI product bought in the local computer store.
    - I suppose my board (Vendor = Micro-Star International Co., Ltd --> also MSI) is an OEM product. I don't have any hard evidence, but on the internet I've found some independent threads claiming the MS-7318 is an OEM product indeed.
    - Both VGA cards (nVidia GeForce 6700XL/7650GS based) are Medion products. They have their own Medion drivers. Nevertheless in the past latest downloaded nVidia drivers seemed to work fine when installing them on these Medion PC's.
    - MS Windows XP SP2 on the provided recovery DVD is a Medion OEM product for sure.
    - My Computer model = Medion Akoya MD 8818
    - Test computer = Medion Akoya MD 8818 (same board, same PSU, same graphics card, same ...) --> But a few months ago, the original graphics card of this test PC also crashed and had to be replaced!! Weak cards these 7650GS. So, the 6700XL is a replacement for the original Medion GeForce 7650 GS in the test PC. Fortunately I could use the graphics card (6700XL) of a 1 year older Medion Akoya MD 8800 PC. This card works fine.

  • Iphone 5 is stuck at connect to itunes screen after the last software update

    The last thing which I did on my phone is software Update and left it at night .Today Morning I saw my IPhone 5 is stuck at connect to iTunes screen
    I  tried connecting to iTunes with my laptop and clicked on restore and update still it is at same screen
    Rebooted the device still same screen
    Please let me know if you are aware of this fix

    Hi vadlapavanigeetha,
    Welcome to Apple Support Communities.
    Did you see an alert window when you attempted to update your iPhone? The suggestions in the article linked below will resolve most update and restore issues.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers!
    -Jason

  • Satellite L10-232: Black screen after the lid closing.

    hello
    I've moved my notebook (satellite L10-232) to another room, it wasn't shutdown (just closed it). When I opened it there was nothing on the screen and the accu isn't empty (processor is still doing some things). Does anyone know how I can solve this problem?
    Thanks

    Easy ..
    Powermanagement is the weakest and less stable functionality on any laptop. (especially with faulty batteries).
    NEVER try to count on standby mode etc. It will work 999 time and the 1000 time it don't.
    Now you ended with a hung laptop.
    The ways to proceed :
    1. the gentle way :
    -push the power button ,and keep your finger on it for 10 seconds. (5 is enough ,10 to be sure)
    -remove your battery
    -plugin powercable
    -push the powerbutton
    2. the less gentle way :
    -remove the power cable
    -remove the battery
    -wait for 24 hours
    -insert the power cable
    -push the power button
    3. the hard way : ENSURE YOUR HARDDRIVE IS NOT PASSWORD PROTECTED,ELSE YOU LOOSE YOUR DATA.
    try to figure out hat is the key startup sequence in order to reset the BIOS at boot. (it should be described in your manual somewhere)
    4. the hardest way : !!!! ONLY BY A PROFESSIONAL !!!!
    ENSURE YOUR HARDDRIVE IS NOT PASSWORD PROTECTED,ELSE YOU LOOSE YOUR DATA.
    The laptop has to be opened and all battery should be removed. All capacitors should be emptied (by letting laptop without any batteries for 72h) . Then power up
    the laptop.
    Please note that I cannot be held responsable for any damage or data loss by any circumstances.

  • ZEN - black screen after the ZEN-L

    Hello!
    First; I'm german so my english isn't very well.
    So, now to my problem:
    I bought a month ago a zen mp3-player (ZEN 4GB). Now I wanted to start it and put some video on it, but the startup stoped after the animated "ZEN"-Logo. I must say its very bad not to have ANY help for this player, neither for my problem nor for any other one. All Zen Players are supported excluding the normal one. You can't call this support! But this doesn't matter now, I would be very pleased if someone could help me. And please don't common with answers like "check the batterie" oder something like this! I tried this for nearly 2 hours. I wont take much time and i gonna through my player on the wall :/ ^^
    It would be very nice if you could help me on starting the player in the recovery mode! All tutorials i found were for the other models, e.g. zen vision etc, but not for the original. Thank you right now,
    Jonathan
    EDIT: I tried already to update the firmeware, the player isn't also recogniced by my pc and the recover software.
    Message Edited by MefistoIV on -0-20070:46 PM

    Can someone please answer or am I the only person on this worl who has this problem? Tahnk you, Jonthan

  • My iphone 4 has been stuck on the "apple" black screen for the last 2 hours, I keep rebooting it but it never gets passed that screen. How do i fix this? :(

    I NEED HELP FROM YOU IPHONE 4 TECH SAVY PPL!!!!

    If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    From Here
    http://support.apple.com/kb/TS3281
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • [Solved] Amilo XI 2550 - Black screen after fresh install

    Dear archlinux users,
    I have been reading the archlinux wiki and forums since I started using arch several years ago. It was always possible to solve the problems I ran into by consulting these webpages, therefore a big thanks to the community for the provided help.
    Two weeks ago I installed arch on a Fujitsu Siemens Amilo XI 2550. The first problem I ran into was that booting the live-cd resulted in a black screen and I could not even start with installing arch. This problem was solved with the kernel parameter 'nomodeset'.
    The first boot of the freshly installed arch also resulted in a black screen after the GRUB menu which was perfectly displayed. After some searching (here and here and ...) I plugged in an external monitor and it showed the login screen. I then installed KDE because I thaught the problem might not show up with X and KDE running. After the login to KDE I realized that the brightness of the laptop display is nearly black but not totally. It seems as if the brightness is at a very low level, but brightness cannot be controlled with the Fn+F8 or Fn+F9 commands. But I see a OSD that indicates that the controls are used but without effect. So at the moment it is only possible to work on the laptop with another display connected to it.
    Maybe of use:
    ls /sys/class/backlight/
    acpi_video0
    radeon_bl0
    less /sys/class/backlight/acpi_video0/bl_power
    0
    less /sys/class/backlight/acpi_video0/actual_brightness
    7
    less /sys/class/backlight/acpi_video0/brightness
    7
    less /sys/class/backlight/acpi_video0/max_brightness
    7
    less /sys/class/backlight/radeon_bl0/bl_power
    0
    less /sys/class/backlight/radeon_bl0/actual_brightness
    255
    less /sys/class/backlight/radeon_bl0/brightness
    255
    less /sys/class/backlight/radeon_bl0/max_brightness
    255
    dmesg | grep drm
    [ 0.736559] [drm] Initialized drm 1.1.0 20060810
    [ 0.743608] [drm] radeon kernel modesetting enabled.
    [ 0.743678] fb: switching to radeondrmfb from VESA VGA
    [ 0.744054] [drm] initializing kernel modesetting (RV630 0x1002:0x9583 0x1734:0x1107).
    [ 0.744065] [drm] register mmio base: 0xCFEF0000
    [ 0.744067] [drm] register mmio size: 65536
    [ 0.744172] [drm] Detected VRAM RAM=256M, BAR=256M
    [ 0.744174] [drm] RAM width 128bits DDR
    [ 0.744257] [drm] radeon: 256M of VRAM memory ready
    [ 0.744259] [drm] radeon: 512M of GTT memory ready.
    [ 0.744275] [drm] Loading RV630 Microcode
    [ 0.744345] [drm] Internal thermal controller without fan control
    [ 0.744386] [drm] radeon: power management initialized
    [ 0.744389] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 0.762830] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 0.762873] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 0.762874] [drm] Driver supports precise vblank timestamp query.
    [ 0.762937] [drm] radeon: irq initialized.
    [ 0.794780] [drm] ring test on 0 succeeded in 1 usecs
    [ 0.795253] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 0.795942] [drm] radeon atom DIG backlight initialized
    [ 0.795945] [drm] Radeon Display Connectors
    [ 0.795947] [drm] Connector 0:
    [ 0.795948] [drm] LVDS-1
    [ 0.795950] [drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc
    [ 0.795951] [drm] Encoders:
    [ 0.795952] [drm] LCD1: INTERNAL_LVTM1
    [ 0.795953] [drm] Connector 1:
    [ 0.795954] [drm] DIN-1
    [ 0.795955] [drm] Encoders:
    [ 0.795956] [drm] TV1: INTERNAL_KLDSCP_DAC2
    [ 0.795957] [drm] Connector 2:
    [ 0.795958] [drm] HDMI-A-1
    [ 0.795960] [drm] HPD1
    [ 0.795961] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [ 0.795963] [drm] Encoders:
    [ 0.795964] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
    [ 0.795965] [drm] Connector 3:
    [ 0.795966] [drm] VGA-1
    [ 0.795968] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [ 0.795969] [drm] Encoders:
    [ 0.795970] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 1.278449] [drm] fb mappable at 0xD0141000
    [ 1.278451] [drm] vram apper at 0xD0000000
    [ 1.278453] [drm] size 9216000
    [ 1.278454] [drm] fb depth is 24
    [ 1.278455] [drm] pitch is 7680
    [ 1.278527] fbcon: radeondrmfb (fb0) is primary device
    [ 1.726069] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 1.770030] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
    Until now and amongst others I tried the following things.
    Using kernel parameters
    video.use_native_backlight=1
    video.use_native_backlight=0
    acpi_osi=linux
    acpi_backlight=vendor
    and others I just cannot remember.
    Masking backlight
    systemctl mask systemd-backlight@backlight:acpi_video0.service
    systemctl mask systemd-backlight@backlight:radeon_bl0.service
    Setting bl_power
    echo 1 > /sys/class/backlight/acpi_video0/bl_power
    echo 1 > /sys/class/backlight/radeon_bl0/bl_power
    Nothing of the above was improving the situation.
    Your help on the problem would be highly appreciated.
    Best regards
    mgs
    Last edited by mgs (2014-10-27 10:15:11)

    Hello Trilby,
    thanks for the reply.
    Trilby wrote:If nomodeset worked with the installation medium, why haven't you tried that for the same problem on your installed system?
    The kernel parameter 'nomodeset' results in a working display but without X support, due to the fact that with 'nomodeset' there is no KMS support and therefore no X. But nevertheless I tried it and as expected X did not start.
    Trilby wrote:Could you also post information about your graphics card and what drivers you've installed.
    The graphics card is a Radeon HD 2700 and according to the above dmesg log it is recognized as RV 630. The radeon module is loaded via /etc/mkinitcpio.conf and xf86-video-ati (1:7.5.0-1) is installed.
    I hope the provided information is what you asked for, thanks for your help.
    Best regards
    mgs

  • GTX670 - Signal lost/black screen after windows loading icon

    Hello,
    I hope I am posting this in the correct forum area.  If not I do apologize.
    Here are my specs:
    Board: MSI Z97-G45 Gaming
    Bios: ?? whatever pre-installed on mobo
    VGA:   MSI GTX670 OC
    PSU:   Corsair HX750 750W
    Intel Core i7-4790K
    MEM: 12 GB Kingston HyperX DDR3 1600 2x 4GB, 2x 2GB sticks
    HDD: SSD Kingston 120 GB (Win7), HDD 1 TB WD 7200 RPM (Win7), HDD 1.5 TB WD 7200 RPM (storage)
    COOLER: Corsair Hydro Series H60 Water Cooler
    OC: no overclocking done by me..default settings
    OS: Windows 7 64bit Professional
    So to keep this as direct and as short as humanly possible here is my situation.
    Had a gtx670 card that I had to send back to MSI under RMA.  They sent me what looks like a new gtx670 card (no dust) that I received yesterday (4 Aug).  Last night I removed temporary old card (9800gt) and plugged in new 670gtx.  Things seemed to be ok, reinstalled driver after card was recognized.  Played one round of Battlefield 4 for testing purposes and all seemed good.
    Upon exiting the game things went south in a hurry.  Moving the mouse cursor around was extremely slow and choppy.  Mouse clicks were not recognized.  I could not bring up ctrl-alt-del to get to task manager.  At this point the cursor turned to spinning circle as if things were happening.  However, after 5+ minutes of nothing changing I did a hard boot.
    Restarted and after the windows loading screen the signal appeared to be lost to the monitor and I was left with black screen.  This was with the SSD.  I then attempted to load into the HDD windows OS that I hadn't logged into yet with this card and was greeted with the same issue.
    I can load into Safe Mode with no issues.  In safe mode I removed all nvidia drivers and was then able to load into windows normally using basic windows vga drivers.  The moment I load the Nvidia drivers and restart the computer I then have the issue again.  This happens with both drives.
    I have reset the video card in the PCI-Ex16 slot and still received the problem.  I have tried a different PCI-Ex16 slot and still had the issue.  I put the old 9800gt card back in and windows loaded perfectly and without issues on both drives.  I put the 670gt in and try to load into normal windows and I lose signal and get black screen after the windows loading screen.
    I'm at a loss at the moment.  I think it's the drivers, but could it be the card?
    Doing some research I've come across some people saying there may be issues with the nvidia HD audio drivers that are installed with the video drivers.  Could it be as simple as uninstalling or unchecking that particular driver?

    Flashed the BIOS last night to the latest version and attempted to launch windows with the GTX670 card.  I still experienced the same issue where as soon as windows finishes it's loading animation (with Nvidia drivers) and it goes to the login screen, the monitors cut out.
    At this point I feel like it has to be the card.  The moment I install the video drivers and restart, I have the problem of losing the signal/black screen.
    What I have done:
    1) Completely wiped any/all video related drivers from the computer and started from scratch. No success.
    2) Ran Memtestx86 to see if it's a problem with my memory sticks. No problems found.
    3) Put the card in a different PCI-Ex16 slot to see if there was a problem with the slot. No success.
    4) Flash updated the BIOS on the motherboard to the latest version. No success.
    I have a dual boot computer with Windows 7 64-bit installed on an SSD and a HDD.  The problem happens on both drives.  Yet, the moment I install my old 9800GT the problem disappears and I can login to Windows just fine.
    I will be sending the card back today on another RMA.

  • 270X Gaming - Black screen after driver install

    I just recently purchased an MSI R9 270X Twin Frozr Gaming.
    I physically installed the board and booted my PC. Windows started fine, albeit in VGA mode. I then proceeded to install the latest AMD drivers for the card (13.11 Beta). I made it through installation and then rebooted. When I rebooted, I got a blank, black screen after the "Starting Windows" screen. I was unable to boot windows, so I restored to last known configuration and tried again with different drivers (13.9) with the same result.
    Does anyone know why windows hangs when it loads the display driver? Any help would be much appreciated.
    Thanks
    Windows 7 x64 SP1 (fresh install)
    ASRock Z77 Extreme4
    Core-i5 3570K (no overclock)
    4x4GB Corsair Vengeance (stock profile)
    Rosewill CAPSTONE 550W ([email protected])
    MSI R9 270X Twin Frozr Gaming (S/N 602-V303-03SB1309077057)

    Hi everyone. I just wanted to give you an update. It seems I have resolved the problem.
    After attempting other fixes (fresh Windows install, MB BIOS update, etc), flashing the BIOS of the video card fixed the problem. I used the BIOS version
    015.040.000.000.002887. I believe the BIOS the card shipped with is 015.039.000.000.002887. Anyway, there are no problems now. I was able to install Catalyst 13.11 Beta 9.5 with no problems and no black screens.
    I got the BIOS and ATIWinflash from TechPowerUp. I'd post links, but I am too new to the board.
    Thanks guys.

  • Black screen after Mavericks update ?

    Hi everybody,
    First of all, I want you to know that I'm French so I want to apologize for my potential mistakes
    A few weeks ago, I updated Mavericks (because my mac told me to do that every single day .. ) on my Macbook Unibody bought in September 2010.
    After that update, I had a black screen after the "Apple logo" and couldn't do anything. I went to a Genius Bar in Paris and the technician told me that the unique solution was to format the laptop. I decided to accept this because I needed my laptop for work. However, I lost all my data (documents, pictures ...)
    Apparently, I'm not the only person in that case and the problem comes from Mavericks.
    So I want to know if someone else is also in that case, and I think that it's unacceptable that Apple does not communicate about this.
    Thank you

    Connect the MBP to a monitor.  If the monitor fails to produce an image, the GPU is suspect.  If the monitor produces an image, the display or the display connection is faulty.
    Ciao.

  • Black Screen after computer boots to Win XP With NX6600 VTD 256

    My son recently purchased a new computer and gave his old one to me to salvage what I wanted.Since he just a few months ago purchased my NX6600 VTD 256 from me I naturally salvaged that first. I tried to install the NX6600 in my other son's computer without success. First the particulars:
    MSI 845 Pro2 Mobo, 512 mb 133 Mhz Ram, 1.7 Ghz Intel CPU, Aopen AO350 12A PNF power supply, 350 watts with 18 amps on the 12 volt rail.
    I did a fresh install of winXP on a freshly formatted HDD. Installed service pack 2, the latest intel drivers, and 5 different versions of the driver packages including ver 77.77 all with the same results.
    After the computer boots I am intermittantly faced with a black screen after the WinXP logo disappears. This sometimes happens 3 times in a row before I get a working screen. After a good boot the NX6600 benchmarks good with very good marks!
    I am at this point strongly suspecting the power supply is not up to the task, even though the specs for the NX6600 recommend a 350 watt power supply.  Before I start removing all the hardware from the computer except for the NX 6600 to see if I have a hardware conflict, I doubt this because with the NX6600 installed without drivers I get a good boot every time.
    I'm open for suggestions. 

    Thanks for the reply boss killer.
    I tried what you suggested with a CRS power supply 300 watts with 15 amps on the 12 volt rail.
    with the exact same results.
    I then put the crs powersupply back into #1 son's old case reinstalled the nx6600 and gave it a go
    Particulars for the old computer ECS K7VTA3 ver. 1 Mobo with 512 Mb DDR, nx6600VTD256 vid card and the CRS Power supply 300 watts with 15 amps on the 12 volt rail , and win XP pro service pack 2.
    Funny the card works great without any problems with this setup! And the powersupply is 50 watts less and only 15 amps as compared to the other with 18!
    I then pulled all the hardware out of #2's computer and tried it with only the memory, cpu, and NX6600 connected.
    I had to boot 5 times before I had a working screen.
    Now I'm thinking that there is somthing amiss with the NX6600 and the MSI 845 Pro2 ???
    I'm thinking that I would be better off installing the K7VTA3 in #2 son's computer with the NX6600, since this works fine. When I did a benchmark with this setup it outperformed the *45 Pro 2 NX6600 combination By 300 points 2600 as compared to 2300 aqua mark points.
    Isn't this fun?

  • Satellite M70 - Black screen after recovery installation

    So far what I have done is put in the Product Recovery DVD-ROM. Then when restarting my computer I was prompted to restore my computer to the factory defaults and said. After it went through that process it told me to remove the disc so I did. Now all it does is reach a black screen after the Toshiba screen that gives me the options to f2 for setup and f12 for options.
    I do not know what to do now to make my laptop work again. Please help.

    Satellite M70 is old notebook model and I would like to know do you use recovery disc for the first time. I had Satellite M70-159 long time ago and have installed recovery image many times.
    Which installations mode you have used: standard mode or expert mode?
    Try to install it again.
    As Xardas wrote try to obtain Microsoft installation disc and check if everything works well.

  • Black screen after windows logo problem

    Hi people, i have the HP Probook 4530s LH306EA and i have been using it for 3 years without any problems but this week after i did a restart on my laptop i got a black screen after the windows logo.
    The problem is whenever i install the AMD Display driver it says that there were some errors during the install and the pc freezes and restarts into a black screen...
    AMD Display drivers 13.152-130830A-162882C(18 Oct 2013)
    Windows 8.1 64bit
    Is there any solution to this or some other drivers?

    you wouldn't by chance be attempting to use a Sandforce controller using SSD?
    please list your components >>Posting Guide<<!
    See my signature below for guidance
    --------------------vvvvv--------------------

Maybe you are looking for