Black screen and looping after installing and updating Mountain Lion on Macbook pro 2011 13 "i5 2.4Ghz
After first installing the new Mountain Lion upgrading Lion on my Macbook Pro was a little slow, so I decided to format and install Mountain Lion via a thumb drive. After installation on my Macbook Pro was restarting all the time and showing a black screen with codes on the screen. I decided to reformat and reset the PRAM, and that seems to have worked. Occasionally a black screen appears with the codes and my macbook restarts again. Last night I updated the Mountain Lion and error and looping retornartam. I thought I had lost all my works, do more entered in the login screen. I turned off my macbook, went to sleep and this morning I called and finally worked Do not know what's going on in my friends' macbook not occur this problem. The macbook them is the 2011 13 "i5 2.0Ghz and another 2010 and they both work perfectly with the Mountain Lion.
Below is the error that occurred this morning after login.
Interval Since Last Panic Report: 1690 sec
Panics Since Last Report: 1
Anonymous UUID: 67D1DCE1-6759-7BF0-6682-40BCBB09D01B
Thu Sep 20 07:24:10 2012
panic(cpu 2 caller 0xffffff80206b7bd5): Kernel trap at 0xffffff8020687d02, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x00007ccd02000009, CR3: 0x00000000228a6000, CR4: 0x00000000000606e0
RAX: 0x00007ccd02000001, RBX: 0x000000000000003e, RCX: 0xffffff8020cbd000, RDX: 0x000000000000003e
RSP: 0xffffff8110da3720, RBP: 0xffffff8110da3740, RSI: 0xffffff8031ef80c8, RDI: 0xffffff8020cbd000
R8: 0xffffff8031ef7750, R9: 0xffffff8031ef0438, R10: 0xffffff8020cbcc20, R11: 0xffffff814c6e0000
R12: 0xffffff8033b0ec00, R13: 0xffffff8033b0ecb0, R14: 0x00000000000000c1, R15: 0xffffff8031ef0438
RFL: 0x0000000000010296, RIP: 0xffffff8020687d02, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00007ccd02000009, Error code: 0x0000000000000002, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff8110da33c0 : 0xffffff802061d626
0xffffff8110da3430 : 0xffffff80206b7bd5
0xffffff8110da3600 : 0xffffff80206ce4ed
0xffffff8110da3620 : 0xffffff8020687d02
0xffffff8110da3740 : 0xffffff802065f445
0xffffff8110da38a0 : 0xffffff8020681b58
0xffffff8110da3bf0 : 0xffffff802065e1b4
0xffffff8110da3c50 : 0xffffff8020a52e4f
0xffffff8110da3d40 : 0xffffff8020a53052
0xffffff8110da3d70 : 0xffffff7fa1e35434
0xffffff8110da3de0 : 0xffffff7fa1e2412f
0xffffff8110da3e10 : 0xffffff7fa1e33afe
0xffffff8110da3e60 : 0xffffff8020a3181b
0xffffff8110da3ea0 : 0xffffff8020a3133e
0xffffff8110da3f30 : 0xffffff8020a2d2d0
0xffffff8110da3f70 : 0xffffff8020a31e99
0xffffff8110da3fb0 : 0xffffff80206b26b7
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(8.0)[EAD976F9-7469-3F17-AB8E-6A039213 8DCB]@0xffffff7fa1e06000->0xffffff7fa1e67fff
dependency: com.apple.iokit.IOPCIFamily(2.7.1)[9901C237-547C-3B52-99DE-C4870A19E2B5]@0xffff ff7fa0caf000
dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7fa11fc000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7fa11b9000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C54
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000020400000
Kernel text base: 0xffffff8020600000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 22884276012
last loaded kext at 22356664762: com.apple.driver.AppleMikeyHIDDriver 122 (addr 0xffffff7fa1d76000, size 20480)
loaded kexts:
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.1f2
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOBluetoothUSBDFU 4.0.9f33
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.AppleMuxControl 3.2.11
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyEventDriver 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.5
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.1
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.68f98
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353432382D3034302E413031472020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393955353432382D3034302E413031472020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9A302, 500,11 GB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0xfa120000 / 4
Is there a hardware problem?
thank you
Before you upgrade, make sure all your software supports it based on post July, 25, 2012 reports on
http://roaringapps.com/apps:table
Reports prior to this date are unreliable, as they are likely with beta releases of Mountain Lion to developers. Other pitfalls to realize include:
https://discussions.apple.com/docs/DOC-3761
Similar Messages
-
Black screen on startup after installing security updates KB293357 and KB2937610 on Win 7 64bit
After installing security updates KB293357 and KB2937610 (both related to .NET) on Win 7 Enterprise 64 bit, my computer fails to start up correctly:
- start up and windows boot screen
- then black screen and computer freezes
The only option to this problem I found so far is do a cold reboot and then let system repair uninstall the updates. Is there a better way to solve this problem?
System:
Asus UL80VT laptop
NVIDIA GeForce G210M (driver version 9.18.13.2702)
Win 7 Enterprise, fully updatedHi,
After you unstall the two updates, does the black screen issue completely disappear? We should first figure out whether the two updates are the culprits.
Since the two updates are related with .net as you mentioned, then here's a .NET Framework Repair Tool released by Microsoft, I suggest you try it and check if it cna detect something.
http://www.microsoft.com/en-in/download/details.aspx?id=30135
Check your event viewer and see if it recorded something valuable.
Yolanda Zhu
TechNet Community Support -
After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up
I need to boot to macintosh but i cant see the drive nor to restore to the fastory settings through recovery HD, What can i dohold down the option key during boot it give you the option of what parition you wish to boot into
-
after installing "OS X Mountain Lion" it saypowerpc applications are no longer supported" how to fix this, and why they dont say before you install that this might happen!
Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.) -
After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen
After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen
See Here for Troubleshooting Grey Screen on Startup:
http://support.apple.com/kb/TS2570 -
After updating my software from snow leapord to mountain lion my MacBook Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone hel
Note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.
-
Can't use parallels desktop ver.7 after installed OS X Mountain Lion
Dear All
Everyone has solution to fix this issue ? I can't use the parallets desktop ver.7 after installed os x mountain lion.
Please advice.
Thanks & regardsHi,
Make sure you have the most current build of Parallels 7 - it works well fro me, and the other poster, so unless you have some lind of issue internally, it should work for you.
Try doing a repair permissions from Disk Utility. I needed to do that to get Quicken Essentials to work.
Cheers,
M. -
I have been asked to set up an Icloud account by Apple.
How will having another icloud email benefit me. I have my work email which is all i require, but had to set up a @me account to get email on my Macbook.
I have a Mac computer that i upgraded to Mountain lion, a macbook pro and an iPhone 4s which has the latest software. all i want is simplicity and to have one email account which which will not duplicate everything 4 or 5 times.
My notes are duplicated, i have to delete my emails individually on all devices so whenever i put my phone on, all the emails i have deleted at work re-appear on my phone and again the same thing happens on my Macbook pro. I seem to spend all my time deleting emails 3 times.
Is there something simple in the set up of these that i am missing?
Any help would be appreciatedI have been asked to set up an Icloud account by Apple.
How will having another icloud email benefit me. I have my work email which is all i require, but had to set up a @me account to get email on my Macbook.
I have a Mac computer that i upgraded to Mountain lion, a macbook pro and an iPhone 4s which has the latest software. all i want is simplicity and to have one email account which which will not duplicate everything 4 or 5 times.
My notes are duplicated, i have to delete my emails individually on all devices so whenever i put my phone on, all the emails i have deleted at work re-appear on my phone and again the same thing happens on my Macbook pro. I seem to spend all my time deleting emails 3 times.
Is there something simple in the set up of these that i am missing?
Any help would be appreciated -
MacBook Pro hanging with blue screen and spinner after installing Software Update
Hi I was wondering if someone could help me with this current issue. Just a few hours ago I finished reinstalling Mac OS X Snow Leopard in my MacBook Pro. I performed a clean installation as part of a yearly spring cleaning that I do on all my systems to keep them optimized. So there was I downloading some software updates which included the combo update of OSX 10.6.8 and others. The updates finished downloading and the system logged out to install the updates, when the updates finished installing my MacBook proceeded by logging out into a blue screen and show a gray spinner similar to the one seen when you start your Mac. Here's the problem after 2 hours the system is showing the spinner and the blue screen, I think that my computer has just hanged in the reboot process.
I was wondering what should I do? Do a force restart? Or leave it overnight?
Also, where can I find any information on what error is causing this issue?
I appreciate your responses and help.
By the way, I installed Mac OS X from a USB stick that has the original image of the disk installer that came bundled with my computer.Kappy wrote:
Force a shutdown. Do not restart yet, but first do the following:
Repair the Hard Drive
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Next, boot into Safe Mode then restart normally.
Hi Kappy,
Checked the hard drive after forcing a shutdown and booting from my Snow Leopard Installer USB Key and the status of the HDD says "Verified". I ran the repair and the volume was repaired successfully. Clicked on "Verify Disk" and it says "Macintosh HD appears to be OK". So I ran a second repair and again no errors were reported.
As suggested I booted back again in Safe Mode and restarted normally. All software appears to have been installed successfully. But I don't understand why my computer hanged and showed the spinner after installing the updates in the blue screen that appears just before rebooting. I am aware that the system shows that spinner after a OS update but the longest it lasts is 30 seconds at the most in my previous cases. -
After entering my pw at the login screen, I get a black screen
This started after battery got fully drained accidentally.
It has happened in the past after battery gets fully drained accidentally, and I have to reboot several times until it boots properly.
This time I tried rebooting several times but it never booted properly
Tried booting into Safe Mode, by restart Mac while holding down theShift key past the chime, until I saw the Apple logo and spinning gear. I did NOT see the spinning gear change into a solid progress bar. I also did NOT see OS X login window with the words “Safe boot” in bright red.
I Tried booting Mac’s recovery system, by restarting Mac and holding down Command + R during boot. I ran Disk Utility and theVerify Disk option did NOT find any errors. Interestingly only 16 mb was found to be available on the 250 GB disk. Note: I have filevault2 encryption enabled
Please find below the output of verbose mode. (Command-V)
com.apple.launchd. 1 com.apple.launchd.
** /dev/rdisk1 (NO WRITE)
** Root file system
Executing fsck_hfs (version diskdev_cmds-557.3.1~5).
** /dev/rdisk1
Using cacheBlockSize=32k cacheTotalBlock=98304 cachesSize=3145728k.
** Root file system
Executing fsck_hfs (version diskdev_cmds-557.3.1~5).
** Checking Journaled HFS Plusvolume
The volume name is Macintosh HD
** Checking extents overflow file.
** Checking catalog file.
CoreStorageGroup::completeIOrequest - error 0xe00002ca detected for LVG "Macintosh HD"(F2296C53..........), pv 22837757 .........., near LV byte offset = 1823211520
disk1: I/O error.
AppleUSBMultitouchDriver ::checkStatus - received Status Packet, Payload 2: device was reinitialized
** The volume Macintosh HD could not be verified completely.
Kext loading now disabled
Kext unloading now disabled
Kext autounloading now disabled
Kernel requests now disabled
com.apple.launchd. 1 com.apple.launchd.
N 20 21:05:51 2014
C
ocontinuing
m.apple.launchd. 1 com.apple.launchctl.system
done
CPU halted
I do have time machine backup.
Do I need to erase the harddisk and restore from time machine, just reinstall OS Mountain lion from internet, get a new hard disk, or do something else.
I don't know if I need to boot this Macbook from an external disk/drive and copy data or fix some minor error
PLEASE HELP !
I would highly appreciate it.Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode -
Black screen after login, Mountain Lion on Macbook pro 13 inch early 2011 SSD 256 GB
After entering my pw at the login screen, I get a black screen
This started after battery got fully drained accidentally.
It has happened in the past after battery gets fully drained accidentally, and I have to reboot several times until it boots properly.
This time I tried rebooting several times but it never booted properly
Tried booting into Safe Mode, by restart Mac while holding down theShift key past the chime, until I saw the Apple logo and spinning gear. I did NOT see the spinning gear change into a solid progress bar. I also did NOT see OS X login window with the words “Safe boot” in bright red.
I Tried booting Mac’s recovery system, by restarting Mac and holding down Command + R during boot. I ran Disk Utility and theVerify Disk option did NOT find any errors. Interestingly only 16 mb was found to be available on the 250 GB disk. Note: I have filevault2 encryption enabled
Please find below the output of verbose mode. (Command-V)
com.apple.launchd. 1 com.apple.launchd.
** /dev/rdisk1 (NO WRITE)
** Root file system
Executing fsck_hfs (version diskdev_cmds-557.3.1~5).
** /dev/rdisk1
Using cacheBlockSize=32k cacheTotalBlock=98304 cachesSize=3145728k.
** Root file system
Executing fsck_hfs (version diskdev_cmds-557.3.1~5).
** Checking Journaled HFS Plusvolume
The volume name is Macintosh HD
** Checking extents overflow file.
** Checking catalog file.
CoreStorageGroup::completeIOrequest - error 0xe00002ca detected for LVG "Macintosh HD"(F2296C53..........), pv 22837757 .........., near LV byte offset = 1823211520
disk1: I/O error.
AppleUSBMultitouchDriver ::checkStatus - received Status Packet, Payload 2: device was reinitialized
** The volume Macintosh HD could not be verified completely.
Kext loading now disabled
Kext unloading now disabled
Kext autounloading now disabled
Kernel requests now disabled
com.apple.launchd. 1 com.apple.launchd.
N 20 21:05:51 2014
C
ocontinuing
m.apple.launchd. 1 com.apple.launchctl.system
done
CPU halted
I do have time machine backup.
Do I need to erase the harddisk and restore from time machine, just reinstall OS Mountain lion from internet, get a new hard disk, or do something else.
I don't know if I need to boot this Macbook from an external disk/drive and copy data or fix some minor error
PLEASE HELP !
I would highly appreciate it.Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode -
.
https://www.apple.com/mac/compare/notebooks.html
will I get further updates if I buy macbook pro without retina
I do not know what you mean by that. Any currently produced Mac is likely to be supported for as long as every other Apple product that has ever been produced. Most Apple products are relegated to "vintage" status approximately six years after which they are discontinued by Apple, meaning that the non-Retina MBP is likely to be supported through 2020. -
My Macbook Pro wont startup after installing OS X MOUNTAIN LION
I just installed os x mountain lion on my laptop and it keeps rebooting itself with an error message, it wont let me do anything else? please help
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
Tried to update the EFI on Macbook Pro 2011 & Crashed?
Hey all
So this is my new Macbook Pro 2011! FIrst apple producct ever!
I installed a bunch of updates to my mac before & they worked fine- without issue
but i recently tried to install the Macbook Pro 2.3 Firmware Update & the thunderbolt firmware update but something went horribly wrong
The mac was plugged into the wall and the magsafe charger was lit green- and the update downloaded & seemed to have installed- but on reboot i got a horrible single beep & the HDD went out...
Then after that it tried to reboot on its own 3 more times b/ci heard the fan- but it was without a display [just a black screen but no picture] & but the HDD kept getting cut off...
I held down the power button for 7 seconds & it finally booted normally after a prolonged apple logo screen
& now it seems to be working fine...
can you guys tell me what the heck just happened? My macbook crashed? :[ /?
btw system prefrences says the update is installed- but system update still says its avialable?? O_OHey Pennyboy24,
I have an early 2011 Macbook Pro and I also just updated to the Macbook Pro 2.3 EFI Firmware Update. Mine updated fine but when the MBP restarted, it also made that single long single beep and it was slow to restart. Once it restarted, everything seemed to be normal but now my System Updates don't work. Everytime I click on System Updates, I get an error that says it crashed. Since your System Update says the EFI Firmware Update is still available and my System Update now crashes, I'm thinking the update messed up something with System Update. I've just spent weeks trying to get my OS X Lion working so this really ***** to have the EFI Firmware Update cause me another problem. Anyone with suggestions? -
Video and audio not synchrone with apple tv after update mountian lion on macbook pro
i have a problem with my apple tv. after i bought and instaled mountain lion on my mac book pro i have trouble with apple tv and my laptop. when my laptop conects with apple tv most of the time my wifi doesnt work on my macbook but on my apple tv it stil does work. when it does work and i play a movie of my own by using itunes the first second the video and audio is synchrone but after that audio is at normal speed but the video gets behind. and i am getting sick of it. does sumbody reconize the problem and can help me with this problem?????
Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.
Maybe you are looking for
-
[Solved] Gnome 3.14 crashes on session start
Hello, I'm currently experimenting issues on my PC after making an update to gnome 3.14. After the update, I'm no longer able to launch any gnome session. GDM seems to work fine, but after the login the session launch always crash as I get the famous
-
Question: My 2009 macbook pro has 'kernel panic' - it is running Lion - I have visited the nearest Apple Store twice, & tried repeatedly to re-install Lion, then recover from Time Machine. However, the problem persists - anyone have any ideas?? Regar
-
How do I get rid of Favorites sidebar in FaceTime in iPad?
I selected favorites in the FaceTime app in my ipad and it comes up as a transparent sidebar that I can no remove. I can not get to the back camera selector and I can not see the entire screen. How do I get rit of the favorites sidebar?
-
How to i attache a table in new mail
S.No Date Branch Vendor Name Call Number Call Detail Opening Date Closing Date Status Remarks 1 01.02.2011 Thoothukudi Front Line STUP00002876 UPS Battery Backup Problem 01.02.2011 Pending Pending Pending 2 01.02.2011 Tenkasi HCL 8600086580 Network N
-
Hi guys, I have an SB Audigy. Unfortunately, my installation cd was ruined and i had to get a new Hard dri've. I have successfully installed drivers and the Creative audio console, but i cannot find anywhere the original installation files for Surrou