Black screen and slow aluminating light ??

My screen went blant and the power light is lighting up 1-2-3 blank 1-2-3 blank.
does anyone know the remedie. Or is is dead?

The little paper thing solved it perfactly!!

Similar Messages

  • Black screen and slow movement with Gnome and ati driver

    Greetings, I use ati driver free.... and Gnome... and gnome  sometimes works very slow and shows black screens... other days works fine...ideas?... i try installed catalyst-utils, but gdm dont start.
    Greetings and thanks.

    try to flash bios & graphic card drivers from the link below.
    http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_list.aspx?CategoryID=46

  • Imac starts with a black screen and flashing white light on console

    I have a 24" imac, it is white and it is from the first year they used the intel chip. When I power it up I get a black blank screen and then the white light on the lower right side of the console flashes on and off. I hear the disk drive spin (I put the 10.4 install disk in ) and it does nothing. How do I get the disk out. I even tried holding down the mouse button at start up and that doesn't work.
    I tried to remedy this myself by resetting pram. I have taken out memory and put it back in. I have been able to get it running twice before by taking out memory and putting it back in but it only worked for a little while and then I turned it off and went to turn it back on and same problem again. Is this a logic board problem or something else. I think I read if it was the logic board the disk drive wouldn't work but I hear it spinning.
    Can anyone help me?

    Hi MacGruff69
    That has all the classic signs of unseated, improperly seated or bad RAM.
    Laying the iMac face down on a soft towel and reseat the module(s) by pressing real hard on each one with both thumbs, then closing the ejector clips and replacing the cover.
    http://support.apple.com/kb/HT1432
    Them if the iMac still has the same symptoms, try one module at a time or replace the module(s) with new one(s).
    http://eshop.macsales.com/shop/apple/memory/iMac/IntelCore_2Duo
    Dennis

  • IMac black screen and flashing power light

    I installed several system updates on my 2007 iMac last night, running OS 10.7, and today I can only get a black screen with a flashing white power light when I try to start up. My computer will neither start up nor completely shut down, and my wired keyboard won't communicate either. Help!

    Power down, unplug if needed.
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk.

  • Worked for 2 hrs. then black screen and nothing but lights in front and back lit

    Bought this a year ago and put in closet till Saturday so I install it and it works great then 2 hrs. later I come in and screen is black. I press button on mouse nothing I press buttons on keyboard nothing. I press power button to turn off the computer wait 1 min turn on lights light makes some noise but nothing. monitor is good because I tried my old one which I am using now. When it is connected to the computer it says no signal.

    Hello Rfuz49,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I  understand you are having issues with what I am not quite sure. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great weekend!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Black screen and flashing red light

    A couple of days ago my bb torch 9860 suddenly turned off and when I turned it on the battery was completely drained.
    I took it home and hooked it up to a charger. After 8 hours the battery was still charging. Upon removel the BB would display a battery drained message within 2 minutes. This was weird since the BB was about 3 months old. I decided to get a new battery. This didn't solve the problem. The store where I bought the battery told me that there was a problem concerning re-calibration. However they were unable to perform that fix. I took the BB home and decided to try something myself.I followed the steps of this web page: http://forums.crackberry.com/blackberry-bold-9000-​f83/how-re-calibrate-blackberry-battery-643307/, but that unfortunatly made my problem worse. All my BB torch does now is flash the red light every once in a while with battery and the power cable in. When i remove the battery once in a while i get a screen displaying an empty battery with a red cross in it. Please help me, i tried to connect to the computer and reinstall BB device software and it fails. I have no clue what to do. Maybe someone can help me send the BB to a Blackberry factory, I have no clue how to do that. 
    Thanks in advance!!!

    Hi and Welcome to the Community!
    Given what you describe, it's likely that your BB has a physical defect. The only way to seek warranty hardware level support is via the reseller from which you purchased it...they are 100% responsible for all of your hardware and warranty support. They can arrange to have it sent to the factory if that is what is required.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My Curve 9220 has a black screen and the LED light blinks red every 5 seconds

    The phone won't come on and the light blinks red. I dont know what to do 

    Hi there,
    If you have a good battery or the batttery is good enough then try those steps , it may help :
    ( Credit JSanders )
    1) Make sure you have Blackberry Desktop Manager installed. BlackBerry desktop software
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.  BlackBerry Software Download Site
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    Good luck.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • My computer starts turning on with a black screen and the sleep light flashes, then the old screen from when my battery died shows up behind like a blue screen, then it dies again and wont restart? And yes my computer is fully charged now, HELP!

    So the problem now is in the question, but just before this problem the initial issue was my computer would start and turn on but the backlight appeared to be on its dimmest setting I could barely make out icons and the last page I viewed. Please help I'm in college and did not back up everything plus I desparately need my microsoft office for these classes!  Thank you!!!

    Hi kmdmsu08,
    If your computer's not turning completely on, I would try the steps in this article, especially step 4:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Take care!
    - Ari

  • Mac book pro won't turn on black screen and capslock key on

    Macbook pro won't turn on - black screen and caps lock light is on

    Hi Daleobrien73,
    Welcome to Apple Support Communities.
    You may find some useful suggestions for troubleshooting your MacBook Pro in these articles:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    Best,
    Jeremy

  • Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?

    Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?

    Everytime this happens Ihave to power down and restart! Any ideas would be appreciated!

  • My mbp always hang (black screen but still keyboard light)(snow leopard and lion) and self hang and restart(mountain lion), How can I do? (I report problem to apple for 100 times but no reply)

    I use mbp late 2010 (MacBook Pro (15-inch, Mid 2010) Serial Number: W802627ZAGZ)
    (core i7 2.66GHz. 15" 4GB 1067 MHz DDR3) and change display to highres (1920x1080)
    it has problem that the screen go blank (or black screen) but keyboard still light. seems to display driver stop working.
    I send my mbp to service but they said no problem about hdd.??? I'm not sure that they take care just only hd problem but not handle  another problem that I tell him.
    I use it and it still hang up (not it reach 100 times errors) how can I do with this problem?

    baltwo wrote:
    Can't recall which I used to do the dynamic repartitioning.
    I'm betting that it was originally Partitioned with Snow Leopard.
    As a test I just added a second Partition with Mountain Lion to a FireWire HD and it would not let me Install Snow Leopard from my System or Retail Disc into the Partition.

  • How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

  • Pro won't start.  Instead get a black screen and a beeping every 2 seconds. LIght at front right corner of keyboard flashes in sequence with beeping.

    Pro won't start.  Instead get a black screen and a beeping every 2 seconds.  Light at front right corner of keyboard flashes in sequence with beeping.

    If it is giving a single beep every two seconds, then it is not seeing any of the memory.  You could try taking the back off, remove the memory module and reinsert to see if that corrects the problem.  Or just take it to an Apple store genius bar and have the techs do that for you.
    If you are uncertain about working on the memory modules, you can find on-line videos for doing so at OWC, http://www.macsales.com where you can see the procedure for your year, make and model of MacBook Pro.

  • My Time Capsule backups disappeared (blank black screens) and in trying to set it up again I now find that when TC is plugged in and on (green light) it cancels out wifi reception from my router. I am only using TC as a backup not for wifi. Help!

    My Time Capsule backups disappeared (blank black screens) and in trying to set it up again I now find that when TC is plugged in and on (green light) it cancels out wifi reception from my router. I am only using TC as a backup not for wifi. Can anybody help?

    Sorry, you have lost me since it appears that you have two completely separate issues here.
    All that I can suggest is you start over and try to set up the Time Capsule again first...and then, once that is done and the Time Capsule is working correctly on the network....then, try to troubleshoot the separate Time Machine issue.
    If you decide that you want to do this, we'll need some basic information:
    Make and model number of your modem?
    You are using OS X Mavericks (10.9.3), correct?

  • My ipod has a black screen and  will not turn on how can i fix it

    I have tried everything that i can to get my ipod to turn on.  It has a black screen and hasnt done anything atleast 2 weeks.  Please help.

    1. Can you get it to light up doing a hard reset and holding the buttons down for at least a minute?
    2. Is it charged up?
    3. Is the USB power cable good?
    4. Can you get iTunes to recognize using recovery or DFU mode?
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

Maybe you are looking for