Black Screen ....cant see anything but sound and synch works

My iphone 3g just stopped displaying anything. Its around 6 months old. I tried synching it with itunes and it backsup fine. I can hear the click sound when I attach it to itunes aswell.
If I try calling my nos from other phone I can also hear the phone ringing but no display just black screen. Its virtually unusable.
Any one faced a similar issue before? Please help!!

Have you tried restoring your iPhone with iTunes from your iPhone's backup and/or restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup?
If no change after either restore option, your iPhone 3G is still under warranty. Unless this was caused by accidental damage or the moisture sensors have been tripped, you would receive an exchange under warranty if this cannot be resolved by any other means. You can call AppleCare at (800) 694-7466, or make an appointment at an Apple store if there is one nearby.

Similar Messages

  • My iphone 4s blacked out you cant see anything but a white line im trying to seee how can i transfer all my stuff off my iphone to this computer?

    My iphone 4s blacked out you cant see anything but I white line, how do you transfer everything from your iphone to a computer

    Next time make regular backups of your computer. The iPhone is not a backup device, and I'm sure you lost more than your iTunes library. See this user tip for your options: Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • My iphone screen has broke and i cant see anything but i can still hear my messages coming through, is there any way i can read those messages online?

    Please help, my iphone screen was repaired with a faulty screen and my screen has went sheet white with all coloured lines so i cannot see anything on the screen at all. My phone is still on and i can still hear all my messages coming through, is there any way i can read those messages before dumping the phone?

    Only if:
    1. It's iMessages
    2. You have a newer Mac and iMessage is configured
    3. You use the same Apple ID

  • TS1424 itunes is saying i cant connect to itunes because im locked out with my passcode but my display screen is broken and i cant see anything but my phone works, what should i do? i want to back up my phone before i upload my new one! help me please

    im locked out of itunes because i need to put my passcode in but my display screen is broken. i dont know how to fix it because im tying to back up my old iphone but i cant without putting in my passcode.

    If you have synced the device on a computer in the past, you can back it up without the passcode. If you have not synced/backed up the device before, then you are out of luck. No way to back it up or sync it without the passcode.

  • My iphone screen is broke and i cant see anything but it still rings how can i unlock it ?

    My iphone 4s is broke the screen has gone complety blank and its all cracked but when people ring me and text me things like that you can hear it and answer but to back up my phone for when i get a new one i need to unlock it any ideas how ?

    Other than finding a third-party repair shop to replace the screen, you can't. Apple doesn't replace iPhone 4S screens, they replace the whole phone, so going to an Apple store won't help you.

  • White screen cant see anything!!!!

    What to do if you have white screen on 2nd gen ipod touch its a 32

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My Ipod kinda works it just has a white screen and i cant see anything.

    I can turn it on and slide it to unlock i can just to that from memory but it is white and you cant see anything but white. it also lets me play music but nothing else

    have you tried the troubleshooting hints:
    http://www.apple.com/support/ipodtouch/troubleshooting/ipodtouch/

  • Yesterday i just try to open my iPad but i had a black screen. I can hear it working but i cant see anything. I tried all kinds of restore reset everthing but i still got a black screen. Anyone has the same problem and got a sollution? Thanks in advance..

    Yesterday i just try to open my iPad but i had a black screen. I can hear it working but i cant see anything. I tried all kinds of restore reset everthing but i still got a black screen. Anyone has the same problem and got a sollution? Thanks in advance..

    See this Discussion
    https://discussions.apple.com/message/19521062
    The principle is the same...

  • When ever i go to watch videos on youtube or any other apps, the screen goes black. you can hear the video but you cant see anything. how do i fix this?

    i have an ipod tough 3g and its like about 4 to 5 years old it works perfectly fine except the home button is abit messed up and the ipod sometimes crashes. but other than that everything is fine. so i was watching something on an app and then al of a sudden i dont see the video i can just hear it. i then think its just the app but when i go on youtube the same exact thing happens. you click to watch a video and you can hear it perfectly but you cant see anything. the screen is just black when u ONLY watch a video. this happened last night so yea.i really hope somebody can help me figure out how to fix this and whats wrongwith it:)
                                                                                                                         thanks for your time and help!
                                                                                                                                                       Noor .T.

    When it goes black do a very short press of the button on the right upper side of the phone and the screen will reappear.  Make it a very short quick press.
    OTOH, if you are using the speaker so you can watch the screen as you are talking when it goes dim touch the screen anywhere that it is blank and it will again go bright.  On long calls you have to repeat this.
    Many folks have had the same problem you described and what I have told you is the best and ONLY way around the screen going blank during a call.
    JerryF

  • I dropped my ipod 5 and screen is black and i cant touch anything but siri still works

    i dropped my ipod 5 and screen is black and i cant touch anything but siri still works

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • My ipod screen blacked out and wont let me see anything but it will play music

    my ipod screen blacked out and wont let me see anything but it will play music. how can i fix it or cani get a new one?

    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    If not under warranty, Apple will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place might be less expensive. Here is one. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • What can i do when my ipod screen goes white and i cant see anything?

    Please! Somebody give me some advice on what to do when my ipod is white and i cant see anything? i can listen to music but i cant see what i am listening to?

    If none of the usual 5 R's of troubleshooting do any good, you'll need to have the iPod either serviced or replaced as the LCD screen or ribbon cable is damaged or faulty.
    http://www.apple.com/support/ipod/five_rs/nano3gen/
    B-rock

  • I installed New version and now I cant see videos but I can still hear them.

    I installed New Version and Now I cant see videos but I can still hear them. I have Tried everything to fix the Problem. HELP PLEASE!!!!

    Hello
    I have a little bit different problem but its close to this.
    I have installed the .10 version and now i cant see any Video on youtube. And it does not play any sound. It not opens anything with flash player.
    I deinstalled and rebootet the player. I installed the new version again. 10 times....
    I also tried an old version. The 2 older versions. No change -.- its really annoying.
    can you see the Flash animation at http://www.adobe.com/software/flash/about/ ?
    i cant see that animation... but in the help is NOWHERE written what u should do if you cant see that....

  • HT4623 My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't

    I clicked the button in my setting thatz is saying "software update iOS 6.1.2. It turned off and now My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't working. I tried to "update" twice. I am VERY ANNOYED beczuse the last time i updated it, it just turned off and i didnt have ot plug it in or anything. WHY IS IT DOING THIS.....?????? My ipad will not turn on or anything. Help me FIX THIS!!!

    hi Kinney. last hour, i update my ipad 2, then im having the same problems as u. im also hoping people can solve this issue.

  • I cant sync anything but my ringtones to my iphone 4s i try to sync music and nothing syncs

    help i cant sync anything but ringtones to my iphone 4s never had an issue before

    Also... make sure your Computer is Authorised...
    Open iTunes and from the Menu Bar select Store...
    From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced menu).
    When prompted, enter your Apple ID and password, then click Authorize.
    See Here for full details...
    About authorization and deauthorization

Maybe you are looking for

  • All video applications crash when loading a video. Including web browsers, vlc and quick time

    Last night chrome started crashing when trying to load a youtube video. I tried on safari and then downloaded firefox but they crashed too blaming flash player. Then when i tried to play a video using vlc that crashed too and so did quick time. Nothi

  • Blue screen and "startup disc is full" error

    My iPad2 is frozen with an "unaable to download app.....' error and after unsuccessfully trying to turn it off, I attached it to my MacBook Pro to try to sync it.  Nothing happened so i restarted my Macbook Pro.  Upon start up, the MP screen went blu

  • Invalid serial number

    In the middle of a photoshop session the application spontaneously quit (when changing colour palette).  This is a totally legal copy of CS2, recently successfully transferred to a new-ish Mac running Snow Leopard.  When I tried to restart P'shop it

  • Modify service endpoint in webservices.xml throws class not found for link

    Hello, we had a problem for serveral days and have not found any solutions googling. We read the documentation and seems ok, so we are a little desesperate. We have a WebService project in Oracle Eclipse included in Weblogic 10.3.5 with the following

  • Link Buttons In Matrix

    Hi, I'm having trouble trying to link an Employee name in a column within a matrix to the Employee form. I can make it happen with the Employee Id, but can't understand how to make that link but display the Employee name, any ideas ?? cheers, Mark