Black screen during movie playback

I have three downloaded movies in my iTunes library - 2 that I purchased several years ago on a previous computer and re-downloaded onto my new computer from the cloud (when I was living in the US) and one that I rented just recently and downloaded to my iTunes (now I am living in Tanzania, so that took quite some time to download). When I try to play any of them through iTunes, the screen is completely black, even though the movie timer is ticking down as if it's actually playing. No sound, no picture.
Can anyone help? Thank you!

I am deployed in Iraq and have only my 1st gen iPad with me. I purchased 4 movies via iTunes however, the internet here is very bad and there were a ton of interruptions so it took almost 4 days to complete all the downloads. When I started watching one of my movies, it froze and the display went black. I to tried a restart first on the video application and then on the iPad itself to no avail. It wasn't until I reset all settings in the general tab of the systems settings did the video application start responding but if I tried to play the same move, it would do it all over again. When I go to iTunes and do a check for downloads, nothing is there however, I believe that with all the interruptions, bits were missed in the download process and iTunes simply cannot detect it. Also, if I do delete the movies in question, I will have to buy them again because the iPad hasn't been synced to my computer thus no transfer has taken place. Apple either provide a workaround for re-downloading movies free of charge to iPads or refund us our money for content that you have failed to deliver.....

Similar Messages

HT3986 i get a black screen during windows 7 installation on bootcamp 5.0.1

i get a black screen during windows 7 installation on bootcamp 5.0.1 , it wont install

Hi wb2009,
I haven't found that the TV would be an issue, but did find an article that states to not have extra USB devices connected.
Boot Camp: Windows installation boots to black screen with blinking cursor
http://support.apple.com/kb/TS4536
The Windows installation may boot to a black screen with a blinking cursor. This can occur if you use a USB optical drive or USB Flash drive for the Windows installation and another USB device is also connected to the computer.
There's another article that mentions Windows XP or Vista that may apply.
Archived - Boot Camp: Start up to black screen after installing Windows
http://support.apple.com/kb/TS2600
Thank you for visiting Apple Support Communities.
Nubz

Black screen during windows 7 install on 27inch iMac

My iMac turns to a black screen during windows 7 boot camp install. I can use the install disk on my wifes Macbook Pro so I know that the media is good.

Please re-post in the Boot Camp forum.

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

Probelm while installing windows 7 on MacBook pro through bootcamp? I am getting a black screen during installation

Probelm while installing windows 7 on MacBook pro through bootcamp? I am getting a black screen during installation

Apple Support Boot Camp
Is there any article in the above?
did you read the pdf before beginning from Boot Camp Assistant?
Did you upgrade to Lion or was it pre-installed?

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

IMac displays a black screen during installation of Windows 7

I tried to install windows 7 on my imac 27" but imac displays a black screen during installation of windows 7.
I also tried to install it as apples instruction of http://support.apple.com/kb/ts3173 but it failed.
Any solution please.. thanks
I have a late 27" imac with OS X 10.85

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

How do i stop black screen from media playback

how do i stop black screen from media playback?

You mean. as in when you put the phone on your face when you are talking?
It goes dark so you will not open apps are press other controls while the phone is pressed to your face.
Don't be rediculous.

Black Screen During Gameplay and not High Demand Renders?

Hi,
The computer I own has been having issues with games that it previously had no problem with. 20-30 minutes within a session the screen will go black and audio will continue momentarily. The only way out of this issue is to hold down the power button for a reset. I have updated my drivers and cleaned out any dust with pressurized air. But the problem still continues. The strange thing is that I use Photoshop and After Effects for my work and there is no issue. Need help!
Computer Specs:
Model: HP Omni 220-1150xt
OS: Windows 7 Home Premium 64-bit (6.1, Build 7601).
BIOS: Ver: LAV_7 8.ROM vLAV7.08
Processor: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz (8 CPUs), ~2.8GHz
Memory: 8192MB RAM
Available OS Memory: 8172MB RAM
DirectX Version: DirectX 11
Graphics Card name: AMD Radeon HD 6550A
Card Manufacturer: Advanced Micro Devices, Inc.

Hello masinic2,
I understand that just recently you started getting freezing and a black screen during game play and are looking to resolve it. I am providing you with an HP Support document: Using Microsoft System Restore (Windows 7), which will walk you through restoring your computer back to a point in time where you did not have this issue. This will not affect your personal files, but it will affect any applications you have installed or settings you have changed between now and the time you restore back to. You will have to reinstall or redo the changes that are undone during that time frame.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Black screen during startup

I get a black screen during sturtup of my MacBook Pro (April 2011): the backlight are on, but the grey screen with the apple doesn't appear.
Then, after a few, the login screen appear, and after I log in I can use my MBP normally.
I tried resetting the SMC, but nothing changes. I thought to reinstall OSX (I have 10.6), but I realized that I can't if the screen is black.
I've also tried the Apple Hardware test, but I don't see anything.
Any idea or suggestions?

Apparently I solved by resetting the PRAM.

Does your Apple TV pop and crack during movie playback

Does your Apple TV pop and crack during movie playback

Welcome to the Apple Community.
ahunt57 wrote:
Does your Apple TV pop and crack during movie playback
No.
Does this occur with all content.

Apple TV 2 - Not synching correctly during movie playback

Hi all,
Recently bought the new Apple TV and have set it up fine. During some movies playback I notice the picture starts to jerk and then the sound is about 1-2 seconds ahead of the picture. To rectify this I have to pause the video, then play. When I pause, I can see the video playing catchup to whichever point in the sound I paused it at.
Is anyone else having this issue? Or does anyone know what the cause of this issue is?
The movie plays fine on my iMac with no synching issues. Im assuming its because my iMac is running and using its processors at that given moment. Some of my movies are MKV files encoded to MP4 via Handbrake.
Some help or advice would be greatly appreciated.
Cheers

It could well be because your Mac is heavy on resource usage running handbrake which will use as much CPU power as is available to do the job.
Having said that I've seen this occasionally with ATV1 and ATV2, and recently I've wondered if it's iTunes doing something else eg automatically downloading a subscription podcast, and effectively freezing to other processes like AppleTV streaming as it saves a podcast to disc.
The other obvious candidate is the network not quite keeping up with streaming demands and running slightly behind.
Try playback without Handbrake or other intensive processes running - does it behave better?

X220 black screen during boot

Hello,
It's my first post, so welcome . I've been a lenovo thinkpad user for a month - X220 with SSD, W7 Professional, umts module and extended battery (if more information is needed I can send the full description) - and a strange bug occurs to my new laptop sometimes. After pressing the power button most of controls (camera, speaker mute, microphone mute) always make a flash. Next, most of the times (80-90%) the thinkpad logo shows up and the Windows 7 boots - that's ok. Unfortunately, about one in ten trials end in getting a black screen just after the flashes of the controls. The screen is enabled - it is just black. I must disable laptop (I don't have to keep the power button long - simple pressing is enough), and then, the second trial always succeed. It only occurs during the fresh, full boot - I didn't notice it after restarts, back from sleep or hibernation. I use docking stations, but it occurs in both ways - with or without docking station. It's not a huge problem to ignore that issue, but I'm worried that it may result in a more serious problem in the future. Any ideas and help will be appreciated.
Best regards,
Krzysztof
Solved!
Go to Solution.

Hi Krzysztof,
I would check if the problem exists if you use the HDD which came with your notebook.
Also check if the SSD is attached firmly to the connector.
Also try a system check with ThinkVantage Toolbox.
http://support.lenovo.com/en_US/detail.page?LegacyDocID=LENV-DIAGS#ltb
If the problem persists with the native HDD like the SSD, then I would contact service.
kind regards
Andreas
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Black screen during Windows install

Hello,
I have a late 2012 27-inch iMac with the GeForce 680MX 2GB graphics card. I'm trying to install Windows 7 or Windows 8 using Boot Camp, but neither works.
In either case, I can use the Boot Camp Assistant to create a bootable USB install disk, download the latest Windows support software from Apple, and partition the drive to allocate space for the Windows installation.
As soon as I partition the drive, the iMac restarts and tries to boot into Windows. But the only thing I ever see is a black screen (no blinking cursor), no matter how long I wait.
This seems like the exact same issue that plagued the late-2009/mid-2010 iMacs,
http://support.apple.com/kb/TS3173
In other words, it looks like the drivers included with the default Windows install disk don't work on the late 2012 iMac, at least not when configured with the 680MX.
Since this looks like the old problem but Apple doesn't appear to have provided drivers for the new iMac yet (the older iMacs above used ATI graphics, not NVIDIA), I tried to add the latest NVIDIA notebook graphics card drivers to the Windows install disk using the directions here,
http://superuser.com/questions/501812/corrupt-graphics-during-windows-8-installa tion
In particular, I used these drivers,
http://www.geforce.com/drivers/results/55125
They're not explicitly supporting the 680MX (I couldn't find any drivers for it in NVIDIA's website) but they do support the 680M and a whole slew of other cards. Thought it was worth a try.
Anyway, that didn't do the trick. Still the black screen for me.
Any ideas? Have others had this issue with the new iMacs?
Thanks

OK, I figured it out.
You know how the Boot Camp Assistant gives you three options? Create Windows Boot Disk, Download Latest Drivers, Install. You basically need to do all three at once, from scratch.
I'm not sure exactly when in the last couple of months, but Apple updated their drivers. A few days ago I gave this another shot. Initially I tried using the USB stick I had previously created, but using some of the links at the first post above, I tried to inject the new NVidia drivers provided by Apple. That didn't help. I got the black screen and all that all over again.
But then I just tried to start from scratch, remaking the USB stick while simultaneously downloading the drivers. It then also asked me if I wanted to install a new helper tool. I never got that prompt before. Either that tool solved it, or when it was creating the boot disk now it was injecting the new drivers itself in some different way.
Whatever it was, try starting from scratch and going through all the steps and you might be successful in classic "it just works" Apple fashion. Took them a couple of months, but they got there.

Glowing black screen during charging? White vertical lines

Hello all,
Last week i updated my pb to os 2.1 and everything went well. But now I am facing another problem. Sometimes (not always ) when I charge my pb (completely turn off) then the black screen starts glowing during charging and it keeps on glowing throughout the charging period and my pb becomes very hot. And when I turn on my pb after this then white vertical lines appear on the half portion of the screen. The screen also develops white patches but these patches and lines disappear after 5 minutes of usage.
So why is it happening? Is there any problem with my pb? Help someone
Thanks

Hi abhibharti,
Please contact our direct BlackBerry® PlayBook™ tablet support team for further investigation into this issue. You can find the contact information here: http://bbry.lv/JRKRGm
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Black screen during movie playback

Similar Messages

Maybe you are looking for