Black Screen ending/finishing a Presentation

Hello! Something is making me very mad. I use Keynote to create movies to use inside my interactive books.
I create a small animation with music using Adobe Flash and exporting as .mov. So I open Keynote, use a small picture as background and paste the movie created by Adobe Flash.
So I export movie again, now using Keynote.
At the end of the movie created by Keynote, we have a black screen during seconds. Necessary import again, using iMovie and cut this part.
Why Keynote don't have an option as "Finish the presentation after the end of the movie included"? Simple as that!
Someone knows a better solution?

At the end of the movie created by Keynote, we have a black screen
Does your original video file contain black at the end?   I can't replicate this black in the video when exporting.
My Method
1   open new project in Keynote
2   place video on slide, the video has no black at the end only picture
3   export > Quicktime
video plays with no black at start or end
Another important limitation: Keynote Don't permit any audio management - as fade out, for example.
Keynote has no facility to add a fade out audio, you will need to do this when creating the original video.

Similar Messages

  • Ipad presents a black screen

    iPad is working - at least it does syncronize with iTunes - but presents a black screen and does not respond to reset / power off action (by pressing the two keys simultaneously).

    If the reset doesn't work, you may want to force the iPad into Recovery Mode.
    Note: Data will be lost.
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • Presentation sharing black screen

    I've had problems with black screen (and bitrate drop to 0kb/sec) with the "Share presentation"-feature in Jabber Video.
    I did a test with two computers and had the same result.
    1.) HP ProBook Win7 64bit 4Gb RAM Intel HD Graphics
    2.) HP EliteBook 8570p Win 7 64bit AMD Radeon HD 7500M
    Jabber Video 4.5.7.16762 in both cases. Registered to our Cisco VCSE.
    In the test I was making a point-to-point call to a public Cisco EX60
    When sharing Internet Explorer 9 the content would sometimes show for the blink of an eye and then be all black for quite some time.
    The same problem occured when trying to share a full screen powerpoint slide. In this case I started the presentation in full screen and chose to share the presentation through Jabber Video in the dialogue that appears in the lower right corner.
    Sharing for example: Chrome, Excel, Window Explorer and Word was working fine.
    Is there a common problem with IE9 and Powerpoint? Are there more known problems like these?
    I need to know what how to inform my end users.

    I had the same problem as well. I think it had something to do with the remote machine going into screen saver mode whilst in Virtual Display. After the recent patches to Screen Sharing in 10.7.4, I can no longer switch to Virtual Display. Perhaps it was deleted intentionally by Apple?

  • How do I end video so its a small file, and not 15 minutes of black screen?

    How do I end the video? Meaning - I want to do a very short video for my website, only about 15 seconds long, but when I finish editing, hit Share, put it into a quicktime web format, what comes out is 15 seconds of my video, and then about 15 minutes of just black screen - which makes the file HUGE. I just wnat a short, small file. So...what do I do to end it on the short side?

    Hi
    How did You edit Your movie:
    Can it be so that You added audio/sound that is about 15min.
    Then click so that You see the three audio tracks.
    Select the audio that reach out to the right from where the video ends (track 2 or 3)
    Put the playhead on the end of the video clips (track1 end)
    Now select audio on track 2 or 3
    cmd-T will cut the audio
    click elsewhere and then select the audio that reach out to the right
    delete or cmd-X
    alt.
    Select what you'll want in the movie
    Go to Export as QuickTime and select "selected cips"
    Now You'll get a QT.mov that should only cont. what You want.
    Yours Bengt W

  • There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor..

    There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor untill now the monitor is black..

    It maybe trying to boot from the incomplete install.
    Try starting your Mac while holding down the Option key, it should then list all the available boot drives including the Mac OS X one. Boot from the Mac one and then you can wipe the damaged PC one or set the Mac to stay booting in to OS X.

  • I want image instead of black screen when video ends.

    Hi guys,
    I am wondering how you place an image at the end of a VC video. I tried placing several images at the end of a recording but it always ends with a black screen when it is produced. Here is the video I am working on and I want the last text you see to stay on screen instead of the black screen.
    Thanks Gary Garnett

    Gary and all,
    See response here for your question:
    http://groups.google.com/group/TeachMeVC/browse_thread/thread/d557f284b35e911c#
    And consider joining our Disussion Group for VC users at http://www.TeachMeVC.com

  • Iphone G3 screen goes black after ending every call.

    My iphone screen goes black after ending a call. Shouldn't I have to hit the "end call" button? I'm having to re-boot the phone after every call I make. Anyone else have similar issues?

    Nathan C.,
    I know that and it is not the problem nor an explanation.
    Here is the issue I am referring to:
    When someone calls, still during the conversation when I remove the phone from my ear (in order to access the key pad, for example), or in order to hand up, the screen goes black and the phone freezes.
    In other words I cannot terminate the call or access the keys,as I remove the phone away from my ear it shuts down.
    Any help???

  • I was almost finished editing my video and suddenly my video files just show a black screen and wont play.

    I was almost finished editing my video and suddenly my video files just show a black screen and wont play.

    MacBook Pro  / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
    I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better.  Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG.   However, after much searching, I finally did the steps in order and it worked.  
    This was after repeatedly downloading Silverlight from the Netflix site without success.  So here's what I did:
    1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
    2. Followed the directions. I felt like such an idiot for not doing it right before.
    3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
        [also check your Libary/ Internet Plug-ins, but the above search is faster]
    4. Drag it all to the trash and empty it.
    5. Go back to the Get  Silverlight page and click on the Install on that page, not the Netflix site.
    6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
    7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
    8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay!

  • Someone send me large picture file on iphone and now the wheel is spinning. I have a black screen with the wheel spinning no end.

    Received email with large attachment. Couldn't open it on my iphone 4 , it seems to have crashed my phone. Turned phone off, tried to turn it on again but all I got is a  black screen and wheel going around no end. Can anybody help please?

    Reset your phone. Hold down the Sleep and Home buttons until the Apple logo appears. This has no effect on your data.

  • When i play presentations it dislplayed only black screen

    when I select play not Displayed presentation but only a black screen. plays only the music not the pictures. I tried to remove all effects but the result does not change. organizer, photo and video displays correctly. os w7

    >avi files from a program called Bandicam
    What are the details of what is inside the files?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/

  • One-way video with PC user ends up with black screen!

    Whenever i try to start a one-way video chat with someone using AIM on a PC, she ends up getting a black screen. She can hear me alright, but cannot see anything! It's not a lighting thing, as the preview comes out crystal clear... please help, someone!

    When this issue used to happen in AIM 5.9 the "fix" was to get the PC end to do the "Tuning" for the Video and Audio anyways.
    In AIM 6.1 and AIM 6.5 this has been replaced with a simple option in Enhanced IM in the Preferences to select the camera (Audio is done in the Control Panels)
    So in efect this no longer works.
    Of course they do have to have allowed the AIM video part through any firewall or router setting and not just AIM Talk.
    They may also have to allow the app through the XP of Vista firewall as well
    http://www.ralphjohns.co.uk/page12.html#_Service
    9:26 PM Thursday; March 27, 2008

  • How do I keep a completed video from running on past the end, showing black screen?

    My completed Premiere Elements 9 video does not end where it should, it runs on for another five minutes - showing black screen. Do I need to place an end marker to stop the video or change a setting? This has not happened on other videos I've created.

    Steve,
    You were right. There was a straggler lurking out there. I deleted it and was able to get the Work Area Bar to snap back to the correct video length.
    Thanks!
    Christopher J. Klein
    Marketing Coordinator
    1702 West Washington Street – South Bend, IN 46628 USA
    Phone: +1 (574) 233-9490, Ext. 245
    Facsimile: (574) 233-9489
    [email protected]<mailto:[email protected]>
    www.mtiwelding.com<http://www.mtiwelding.com/>
    Manufacturing Technology, Inc.
    Solid-State Joining & Welding Solutions, Equipment & Services
    DIRECT DRIVE   —   INERTIA   —   LINEAR   —   STIR   —   RADIAL   —   RESISTANCE
    THIS DOCUMENT AND ALL INFORMATION HEREON CONSTITUTE CONFIDENTIAL AND PROPRIETARY property of mtI. Any disclosure, transmission, copying, altering or modifying of this DOCUMENT or any information hereon without written PERMISSION OF MTI IS EXPRESSLY PROHIBITED. THIS PARAGRAPH SHALL APPLY REGARDLESS OF ANY AGREEMENT, PURCHASE ORDER OR OTHER WRITING OR DOCUMENTATION TO THE CONTRARY.
    cid:[email protected]

  • Prevent movie Ending on black screen?

    Any thoughts on how to get this video that I encoded with the
    CS3 video wizard to stop playing on the last image frame on the
    movie instead of on the black screen? In QuicktimePro, the movie
    ends on the last image as it's supposed to end.
    http://www397.pair.com/kwilliam/AmeliaFinal.html

    In that case, it seems like one of the display hardware connections or display itself went bad. To be better if you could try connecting it to monitor or get it checked from local computer shop or HP service center.
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • PowerPoint Presentation - Black Screen

    When using PowerPoint with a presentation remote is there a way to have a picture come up instead of just a black screen when
    you push the black screen button?

    Hi,
    In regarding of the issue, please provide us more information to assist you better.
    Which way are you using the remote scenario?
    Using Lync or other communication tool to share presentation? If it is, please see the
    thread.
    Using some mobile device as remote way to share presentation?
    Using Remote Desktop Services environment. Please see this
    thread.
    If I have any misunderstanding, please feel free let me know.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
    Office programs.

  • Bootcamp Installation ending in a Black Screen

    My partner tried to put Bootcamp onto our G5 iMac, however, we are now left with a black screen asing us to press a key on the keyboard but as it is a wireless one the drivers have been wiped so we tried a plug in one that didn't need to be installed and nothing at all is happening!
    HELP!!!

    robandsofy, Welcome to the discussion area!
    If you installed Boot camp you do NOT have an iMac G5. You have an Intel-based iMac.
    I suggest that you post your question in the Boot camp discussion area OR the Intel-based iMac discussion area.

Maybe you are looking for

  • How do you change the owner of a folder?

    Hello, I'm having a very difficult time finding an answer to this question. I have a brand new xserve (10.5.2) up and running fine with a single web site with wikis and blogs enabled. I can get to the web page and the wikis with no problems. The prob

  • How to let TC F110 do the clearing of direct debiting

    Dear friends, I have setup direct debiting for Denmark called PBS Leverandørservice in TC F110 with the necessary configuration. The payment method are working as a flat file downloaded to a local PC and then uploaded into PBS (today called Nets) usi

  • Syncing Forms Across Multiple Application Server Servers?

    Hi Guys, I was hoping someone could point me in the right direction. We recently brought up multiple servers running Application Server 10.1.2.3 for High Availability of our forms and reports. My question is, is there a way to keep the forms files sy

  • What you suggest as a good summary of ADF Java classes? What about a detailed reference?

    Hi everyone, When I was a forms developer, I was quite familiar with the built-ins. Now that I am learning JDeveloper, I am trying to get acquainted with the various Java classes that support ADF development. A summary of classes for the model, contr

  • Custom Library 'Adobe LiveCycle Workflow Fields'

    Hello, I'm just reading through the document 'creating_workflows.pdf' of Workflow 7.0. In the chapter about designing forms for workflow it says that the custom library is available with the SDK, however I was not able to locate the library. There ar