Black screen for ken burns ...

I saved my images and this morning i had to do some ken burns effect, and when i clicked on photo settings.. nothing appeared, just a black screen, do i have to redo the images and their respective ken burns?
thanks!

Are you trying to update an existing clip created with the Ken Burns effect?
When we import a photo with the Ken Burns effect iMovie creates a copy of the photo and stores it inside the project. Trouble is, there's a bug in iMovie 6 that discards the photo when we empty the iMovie Trash so it's not available when we try to update the clip. It turns black.
The solution is to re-import the photo to a new clip, then don't empty the iMovie Trash until the project is finished.
Karl

Similar Messages

Is black screen for iPhone hardware or software problem

Is black screen for iPhone hardware or software problem.

Don't know until you troubleshoot. First step is a reset:
hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

YouTube loads black screen for first five seconds

Starting early January 2013 in Firefox, YouTube videos are loaded as blank black screens for the first five seconds. At the 0:06 mark, videos start playing normally. This is not an issue in Chrome or IE. Tested with all plug-ins and add-ons disabled (except Flash player). Plug-ins/add-ons updated. Tried re-installing Firefox with no solution. Help? Thanks!

You can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

VMware View Session go Black screen for some seconds

Hi Guys,
Recently one of my client is facing issues that VDI Desktop session is going black screen for few seconds and automatically session comes back. I have increased PCoIP Configure the PCoIP session Bandwidth floor to 200. still facing same issue.
Note : All user facing this issue is in branches and we have 2 GBps pipeline Datacenter to Branches. Normally 40% is the network utilization.

Sorry, I was thinking the APEX 2800 cards were related to this, but that was a different ticket I was thinking of. So scratch that.
As far as this problem goes, I have seen this issue happen numerous times. It only happens with users with dual monitors. Here's a workaround: Control Panel > Mouse > Pointers > Scheme > Select a non Aero scheme
It took VMware quite a few months, but they finally generated a KB for it and closed my ticket: VMware KB: Zero client monitors will randomly go black for 1-2 seconds

I need to do non-constrained crops for Ken Burns effect in photo slide show

I am making photo slide shows in imovie '09. I understand the Ken Burns effect and how to set a start and an end point. I want to use the effect on vertical or portrait mode photos. i would like to have the entire photo displayed in portrait mode and have it zoom in a bit. The problem is The start and end points seem to only be horizontal or landscape mode. I can't ever get the entire image selected. How can I do this?
Thanks,
Tim

You need to add the letterbox (black space) in another application. iMovie's Ken Burns effect will not do it for you. You can do it in Photoshop if you like.
However, there is a way to do it in Automator, and you can do hundreds of vertical photos very quickly. That is the way I do it.
Here is more detail:
There is also a quick way to pad your images without using Photoshop. This method will pad hundreds of images in just a few seconds.
You do it with a tool that comes with OS/X called Automator. It should be in your Applications/Utilities folder.
Automator is basically a workflow tool. It allows you to string together commands and actions into a workflow and then execute the entire sequence at once. If you have Snow Leopard, you can even add these workflows to your contextual menus that come up when you right-click.
There are many workflows that would work to pad your images. Here is an example:
In Automator, start a photo workflow and drag the following actions into the workflow from the Action palettes on the left.
You should have something like:
1)Ask for Photos (You must select one or more photos and hit Select - you can make this easier by putting them in an album beforehand)
2) Copy Finder Items (give it a folder to copy to- so you can find them easily)
3) Pad Images. (put a check mark in "scale image before padding" Pick the pixel dimensions of your project...like 640x480 or 960x540. or 1920x1080
Hit Run and a dialog box will come up asking you to select photos. When you are finished, press SELECT and the Automator script will keep running.
Then at the end you should have padded images in the folder you created in step 2.

Photos on timeline showing black when using ken burns effect

My photos in the project are not visible in the preview window when selecting'show settings' after the ken burns effect has been applied. The arrow moves but the screen is black.
Any ideas ??

Although you've posted in the iMovie 5 forum, that sounds like a well-known iMovie 6 bug. If you are using iMovie 6 you may have encountered the bug:
http://discussions.apple.com/thread.jspa?threadID=714698&tstart=0
Karl

Black Screen for Install of Windows 7 on Mac Pro Early 2008

I have a mac pro early 2008 with lion 10.7.4 and boot camp 4.0.3 I think... anyways the problem I have is when I am in boot camp, and configure the HDD partition, then the machine reboots... when it reboots and starts up boot from the install DVD (legit retail copy) I just get a black screen on both monitors. No curser, nothing just a black screen, same as I get when the machine is off! the little white LED lights are on and nothing...
I can hear the DVD spinning up and down a few times then that just stops too...
I have tried resetting the PRAM, pulling the power and watch battery inside for a few minutes, I tried the "fix" that is online for the imac problem with the answerfile and got no different resutls with anything, still the same probelm.
I have the OEM ATI Radeon video card 512MB.
* as a side note, I was never able to download the windows support drivers prior to trying the install... I tried and tried for the last two days so this time I "unchekced" that box and just went for the install...
Any help will be greatly appriciated, thank you :-)
Mike

Hey Hatter, I know this is a little old but I've just picked up this thread and I wonder if you can help. I get the same issue as:
JRASupport
Jun 28, 2012 1:56 PM
I have a mac pro early 2008 with lion 10.7.4 and boot camp 4.0.3 I think... anyways the problem I have is when I am in boot camp, and configure the HDD partition, then the machine reboots... when it reboots and starts up boot from the install DVD (legit retail copy) I just get a black screen on both monitors. No curser, nothing just a black screen, same as I get when the machine is off! the little white LED lights are on and nothing...
I get that dreaded black screen following partioning of my drive on the Windows 7 install on Mavericks on a Macbook Pro late-2008 (MBP5,1) but I'm at a loss to work out where the solution lies in the thread! ;-(
To date I've spent about 5 days going back and forth trying all sorts of combinations, including the obvious:
- removing bootcamp 5 and reverting to 4
- installing the imac drivers
A HUGE thanks if you can offer any help as I'm at the end of my tether...!
Adam
BTW I'm working off USB with 32 bit Windows 7 ISO

My iPhone 3G phone button no longer works. If I push it I get a black screen for a few seconds then back to the home screen. Everything else is ok. Any ideas how to fix this?

The phone button on my iPhone 3G no longer works. Everything else on the iPhone works fine. I can receive incoming calls. I can make calls directly from Contacts. But if I press the phone button I get a blank white screen for a few seconds then it goes back to the home screen. I've tried the hard reset and also restoring orignall settings via iTunes but keep getting the same problem. Does anyone know how to fix this?
Thank you, Neil.

Thanks for the advice but I've tried resetting network settings and also the reset by pressing home and sleep buttons until getting the Apple logo. Still have the same problem. To be clear (because I mistakenly typed black instead of blank in the title to this thread): If I press the phone button I get a BLANK WHITE screen for a few seconds then it goes back to the home screen. I doubt it's the SIM card as I can receive calls and make them directly from contacts. What I can't do is view my favourite numbers or missed calls or access my voicemail, i.e. all the things you get to via pressing the phone button.

Why a Black Screen for pdf files

I can't see the opened pdf files, just get a black screen. Help, please. I have no Adobe plug-ins. I have latest Mavericks software on iMac

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Best compression for ken burns effect

Hey,
I am doing a 2 minute animation that is all ken burns effect. The size is 720 x 1280. On the images that have a lot of detail like brickwork, there is a noticeable pop where you can see compression for a few frames and then it clears up.
I am making a h264 mpg movie straight out of AE. Any ideas?
S. Houtzager

shoutzager wrote:
I am making a h264 mpg movie straight out of AE. Any ideas?
Yes. I have an idea. Don't do that.
AE is definitely not the best tool for making an H.264. Render an intermediate file out of AE (lossless or nearly lossless, such as Quicktime with the PNG codec, Quicktime with the PhotoJPEG codec, Cineform, or DNxHD). Then use the Adobe Media Encoder to make the H.264. Use multipass compression. Adjust the keyframe distance, etc. The cool thing is that you won't have to render your AE comp over and over again for each time you need to test a different setting in your compression. You're just running off of the already rendered intermediate file.

My iPad has been on a black screen for 2 weeks. All it does when I try to reboot is make the black screen backlighted.

I have an iPad 2 and it's been working for about 2 and half years without a problem. It's now stuck on a black screen and whenever I try to reboot it the black screen simply gets lighter. It's been completely charged. Went on customer support with Apple for 2 hours and they couldn't help and wouldn't send a replacement. Please help!

Make an appointment at your local apple store and have them check it out. If the screen or guts inside area dead it's beyond a user fix.

Firefox for Android gives black screen for my site

I developed web app using GWT. And if I open my web app using Firefox for Android it gives me black screen. And nothing more. It happens only at site developed for mobile usage. At desktop version it works fine.
Mobile version url: https://mob.meridianbet.com/mobile.jsp
Desktop version url: https://meridianbet.com
Can someone give me any advice.
Kind regards,
Marko

I can't offer much help but I suggest checking the color
controls on the browser and web page.

Random black screen for 1 second, anyone have this issue?

hi, my macbook pro randomly switches to a black screen
reading threads on black screens, it seems its a common complaint
however I just got mine 2 weeks ago..should a brand new macbook be doing that?
or is it a commonly reported design flaw?
thanks!

I've experienced the same issue exactly as described, with the R7850 Twin Frozr OC Edition. However, I've also experienced a crash or 2 in which the screen goes black and the monitor goes to sleep. The computer doesn't wake up and I'm forced to do a hard reset. One such event was severe enough that I was unable to restore Windows 8 and had to do a full reinstall...!)
Everything is clocked at factory default, passes Memtest 86+, Prime95 overnight run, even FurMark successfully...
Board: ASUS P8Z77-M
Bios: American Megatrends Inc., v1708
VGA: MSI R7850 Twin Frozr III 2GD5/OC
PSU: Seasonic X-750 (+12V@62A)
CPU: Intel Core i5-3750K
MEM: Samsung DDR3 PC1600 8GB (2x4GB)
HDD: WD 500 GB 7200rpm
COOLER: GPU: Stock. CPU: Xigmatek SD1283 Gaia w/Scythe 120mm Slipstream PWM
Sound card: Creative SoundBlaster X-Fi XtremeGamer
OC: No overclocking, factory default.
OS: Windows 8 Pro, 64-bit
When I tried to save the GPU-Z BIOS settings to a file, my computer crashed my computer (!)... Hopefully this is sufficient to indicate if I should follow the same steps or if this is a different issue / hardware issue / ???
TechPowerUp GPU-Z 0.6.7
Driver Version: atiumdag 9.2.0.0 (Catalyst 12.10) / Win8 64
BIOS Version: 015.017.000.000.000861 (113-C4030400-100)
edit:
S/N: 602-V273-010B1210251006
Also updated format of table above
(Perhaps worth noting that the box didn't include any driver CD for some reason)
Thanks for the help.
-DH

Black screen for audio links

When I link to an audio file(mid,aif,mp3), I get a black screen.
How do I get Quicktime player to appear?
I have no trouble with Firefox.

Hi Jim
Would you post an example URL. Thanks

Screen flashing/black screen for 1-2 seconds - 7850 power edition 2gb/OC

I recently bought the MSI R7850 Power Edition 2GD5/OC. I have installed amd catalyst 12.10. I have no issues while playing games...the only game i have played since i bought the card is prototype 2 (all settings set to high). The problem is while browsing or when not playing my screen flashes (just once - screen becomes black) for about 1-2 seconds. This does not happen regularly, but quite a few times.. i have uninstalled and re-installed the same catalyst version twice (downloaded from different sources - one from msi and the other from amd). The problem still persists.
Board: ASUS P8-H67-M PRO
VGA: MSI R7850 Power Edition 2GB DDR5/OC
PSU: Cooler Master GX550 550W (44a 12v rail)
Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W
MEM: Corsair 1333 8gb (2x4gb)
HDD: Seagate 500 GB 7200 rpm
Thanks.
OS: Windows 7 64bit ultimate.

I've experienced the same issue exactly as described, with the R7850 Twin Frozr OC Edition. However, I've also experienced a crash or 2 in which the screen goes black and the monitor goes to sleep. The computer doesn't wake up and I'm forced to do a hard reset. One such event was severe enough that I was unable to restore Windows 8 and had to do a full reinstall...!)
Everything is clocked at factory default, passes Memtest 86+, Prime95 overnight run, even FurMark successfully...
Board: ASUS P8Z77-M
Bios: American Megatrends Inc., v1708
VGA: MSI R7850 Twin Frozr III 2GD5/OC
PSU: Seasonic X-750 (+12V@62A)
CPU: Intel Core i5-3750K
MEM: Samsung DDR3 PC1600 8GB (2x4GB)
HDD: WD 500 GB 7200rpm
COOLER: GPU: Stock. CPU: Xigmatek SD1283 Gaia w/Scythe 120mm Slipstream PWM
Sound card: Creative SoundBlaster X-Fi XtremeGamer
OC: No overclocking, factory default.
OS: Windows 8 Pro, 64-bit
When I tried to save the GPU-Z BIOS settings to a file, my computer crashed my computer (!)... Hopefully this is sufficient to indicate if I should follow the same steps or if this is a different issue / hardware issue / ???
TechPowerUp GPU-Z 0.6.7
Driver Version: atiumdag 9.2.0.0 (Catalyst 12.10) / Win8 64
BIOS Version: 015.017.000.000.000861 (113-C4030400-100)
edit:
S/N: 602-V273-010B1210251006
Also updated format of table above
(Perhaps worth noting that the box didn't include any driver CD for some reason)
Thanks for the help.
-DH

Black screen for ken burns ...

Similar Messages

Maybe you are looking for